Professional Documents
Culture Documents
Code and Name of Course: CVNG 1013 Introduction to Engineering Mechanics Paper: 1
© The University of the West Indies Course Code CVNG 1013 2016……/……/……
DO NOT WRITE OR TYPE ON THE BACK OF THIS SHEET: USE ONE SIDE ONLY
INSTRUCTIONS: Each page must be signed by the Examiners and where applicable, the University Examiner and/or
the External Examiner. Where the examination does not require a University Examiner, the form must be signed by the
First and Second Examiners. Completed forms should be handed to the Assistant Registrar (Examinations). The
EXTERNAL EXAMINER is requested to sign the question paper and return it with comments, if any, (on a separate
sheet), to the Assistant Registrar (Examinations).
…………………………………….. ……………………………………..
First Examiner University Examiner
…………………………………….. ……………………………………..
Second Examiner External Examiner (where applicable)
Q1 Marks
v (m/s)
3
v = t/5
v = -1/3(t-24)
t (s)
15 24
Figure 1
Q2
a) Explain briefly why the horizontal component of velocity in projectile motion is 5
constant.
b) A 20 kg projectile is fired vertically upward with an initial velocity of 25 m/s. 15
Use g as 9.81 m/s2 and determine the maximum height the projectile will travel if
air resistance is neglected.
Q3
In Figure 2 shown, the force makes angles 120°, 45°, and 60° with the x, y, and
z axes respectively at 2 m above the origin. Determine
i) The moment of the force about point O 10
z
50 N
2m
O y
x
Figure 2
© The University of the West Indies Course Code CVNG 1013 2016……/……/……
DO NOT WRITE OR TYPE ON THE BACK OF THIS SHEET: USE ONE SIDE ONLY
INSTRUCTIONS: Each page must be signed by the Examiners and where applicable, the University Examiner and/or
the External Examiner. Where the examination does not require a University Examiner, the form must be signed by the
First and Second Examiners. Completed forms should be handed to the Assistant Registrar (Examinations). The
EXTERNAL EXAMINER is requested to sign the question paper and return it with comments, if any, (on a separate
sheet), to the Assistant Registrar (Examinations).
…………………………………….. ……………………………………..
First Examiner University Examiner
…………………………………….. ……………………………………..
Second Examiner External Examiner (where applicable)
Q4 Marks
A metal rod with length, L = 200 mm and cross sectional area, A = 500 mm2 is
loaded in tension. The stress vs strain curve for a metal rod under tensile
loading is given in Figure 3.
ii) For a stress of 800 MPa determine the extension of the rod. 5
iii) Sketch the loading-unloading curve if the load is removed before the 5
elastic limit of 1000 MPa
iv) Sketch the loading-unloading curve if the load is removed after the
5
elastic limit of 1000 MPa
1800"
1600"
1400"
Stress (MPa)
1200"
1000"
800"
600"
400"
200"
0"
0" 0.002" 0.004" 0.006" 0.008" 0.01" 0.012" 0.014"
Strain
Figure 3
© The University of the West Indies Course Code CVNG 1013 2016……/……/……
DO NOT WRITE OR TYPE ON THE BACK OF THIS SHEET: USE ONE SIDE ONLY
INSTRUCTIONS: Each page must be signed by the Examiners and where applicable, the University Examiner and/or
the External Examiner. Where the examination does not require a University Examiner, the form must be signed by the
First and Second Examiners. Completed forms should be handed to the Assistant Registrar (Examinations). The
EXTERNAL EXAMINER is requested to sign the question paper and return it with comments, if any, (on a separate
sheet), to the Assistant Registrar (Examinations).
…………………………………….. ……………………………………..
First Examiner University Examiner
…………………………………….. ……………………………………..
Second Examiner External Examiner (where applicable)
Q5 Marks
For the soil element given in Figure 4, the magnitudes of the stresses are
σx = 60 kN/m2, σy = 200 kN/m2, τ = 20 kN/m2, and θ = 20°. Determine
i) The major principle stress 5
5
ii) The minor principle stress
iii) The normal and shear stresses on the plane AB 10
σy
τ
B τ
σx σx
τ
A θ
τ
σy
Figure 4
© The University of the West Indies Course Code CVNG 1013 2016……/……/……
DO NOT WRITE OR TYPE ON THE BACK OF THIS SHEET: USE ONE SIDE ONLY
INSTRUCTIONS: Each page must be signed by the Examiners and where applicable, the University Examiner and/or
the External Examiner. Where the examination does not require a University Examiner, the form must be signed by the
First and Second Examiners. Completed forms should be handed to the Assistant Registrar (Examinations). The
EXTERNAL EXAMINER is requested to sign the question paper and return it with comments, if any, (on a separate
sheet), to the Assistant Registrar (Examinations).
…………………………………….. ……………………………………..
First Examiner University Examiner
…………………………………….. ……………………………………..
Second Examiner External Examiner (where applicable)