Professional Documents
Culture Documents
glm165 40 Manual
glm165 40 Manual
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento
y seguridad
GLM165-40
d
g e
h
c e
f i
e
1
7
2
3
4
5 8
9
10
12
11
14
13 15
B 2. 3.
1.
6
˝ 15⁄1
´5 13
13 ´1
1˝
5⁄16
2
X
Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Display Display Elements
2 Measuring button a Temperature warning
3 Minus button b Low battery indicator
4 Function button c Measuring functions
5 Clear/ On/Off button Real time measurement
6 Plus button Length measurement
7 Battery lid Area/Surface
8 Latch of battery lid measurement
9 Serial number Volume measurement
10 Laser warning label Indirect measurement
11 Reception lens d Laser activation indicator
12 Laser beam outlet e Unit of measure
13 Protective pouch f Current measuring value
14 Target cards g Memory value display
15 Hand strap h Previous measuring
value(s)
i Error message “Error”
10
Operation
Protect the tool against moisture and
direct sun irradiation.
Do not subject the tool to extreme temperatures or
variations in temperature. As an example, do not leave
it in vehicles for longer periods. In case of large variations
in temperature, allow the tool to adjust to the ambient
temperature before putting it into operation. In case of extreme
temperatures or variations in temperature, the accuracy of the
tool can be impaired.
Avoid heavy impact or falling of the tool. After heavy exterior
impact on the tool, an accuracy check should always be
carried out before continuing to work (see “Accuracy Check of
the Distance Measurement”, page 19).
DO NOT stare directly at the laser beam
or project the laser beam directly into
the eyes of others. Serious eye injury could result.
12
13
14
16
17
18
Troubleshooting
Cause Corrective Measure
Temperature warning indicator (a) flashing;
measurement not possible
Measuring tool not within the Wait until the measuring tool
temperature range between has reached the operating
+14°F and 113°F ( –10°C temperature
and +45°C)
Battery low indicator (b) appears
Battery voltage decreasing Replace batteries
(measurement still possible)
Battery low indicator (b) flashing; measurement not
possible
Battery voltage too low Replace batteries
All indicators on the display flashing
The measuring tool is Contact the Customer
defective Service
19
20
21
22