Professional Documents
Culture Documents
Ume2022001 Cae A3
Ume2022001 Cae A3
QUE.01
Ans.
1. Plot of Nodal Displacement.
1
NODAL SOLUTION
STEP=1
SUB =1
TIME=1 AUG 9 2023
UX (AVG) 11:27:10
RSYS=0
DMX =.041667
SMX =.041667
Y
Z
1
MN X 3 2
MX 5 6 4
Y
Z
1 XMX 3 2 MN 5 6 4
Conclusion –
Thus a er solving the problem in Ansys it can be clearly seen through Plots and lists that –
1. Node 1 displaces the most (red part) and the fix ends has no movement (Blue por on).
2. The Element 1 is under maximum stress (red por on) rela ve to the other elements of the por on.
The Magnitude of it is 83.333 N/mm^2.
So while designing and analysis, one must take this node and element into considera on.
UME2022001
***
QUE. 02
Ans.
1
NODAL SOLUTION
STEP=1
SUB =1
TIME=1
UX (AVG) AUG 15 2023
RSYS=0 00:51:58
DMX =.013095
SMX =.013095
Y
Z
1
MN X 3 4 5 6 2 8 9 10 11 12 13 14 15 16 7
MX
Y
Z
1 X MN
MX 3 4 5 6 2 8 9 10 11 12 13 14 15 16 7
UME2022001
Conclusion - A er solving the problem in Ansys it can be clearly seen through Plots and lists that –
1. End Nodes i.e. 14,15,16,17 have majority displacement (red part) and the other nodes displace less.
So while designing and analysis, one must take this nodes into considera on. Because the failure might
happen here only as the excessive displacement might cause Elonga on causing permanent deforma on.
***