The document summarizes the design of a cantilever slab (CS1) with a span of 0.6m and thickness of 120mm. It is subjected to a point load of 19.3kN at 0.5m from support. The required steel reinforcement is calculated to be 10mm diameter bars spaced at 150mm, providing a steel area of 524mm^2 which exceeds the minimum requirement of 356mm^2 by 47%. The design satisfies code requirements with an actual to allowable span-depth ratio of 6.3 to 11.9.
The document summarizes the design of a cantilever slab (CS1) with a span of 0.6m and thickness of 120mm. It is subjected to a point load of 19.3kN at 0.5m from support. The required steel reinforcement is calculated to be 10mm diameter bars spaced at 150mm, providing a steel area of 524mm^2 which exceeds the minimum requirement of 356mm^2 by 47%. The design satisfies code requirements with an actual to allowable span-depth ratio of 6.3 to 11.9.
The document summarizes the design of a cantilever slab (CS1) with a span of 0.6m and thickness of 120mm. It is subjected to a point load of 19.3kN at 0.5m from support. The required steel reinforcement is calculated to be 10mm diameter bars spaced at 150mm, providing a steel area of 524mm^2 which exceeds the minimum requirement of 356mm^2 by 47%. The design satisfies code requirements with an actual to allowable span-depth ratio of 6.3 to 11.9.
Thickness t= 120 mm Dead load = 3.00 Filling = 0.00 Filling = 0 mm Floor finish = 2.00 Point load = 19.3 kN Partition = 0.00 At distance = 0.50 m Live load = 2.00 2 Total design load w= 10.20 kN/m Max. B.M. M= 11 kNm As min K = M/bd2fcu = 0.051 Z = 89 mm 190 2 Dia. of bars = 10 mm As required = 356 mm As prvd 2 Spacing of bars = 150 mm As provided = 524 mm 147%