This document summarizes the design of a cantilever slab (RS1_RC Ledge) according to BS8110:2000. Key details include: the slab thickness is 175mm, the effective depth is 145mm, the main span length is 1.85m, and the factored load is 11.1 kN/m^2. Reinforcement details and checks are provided for bending capacity, shear capacity, and deflection. The provided reinforcement meets code requirements for strength and serviceability.
This document summarizes the design of a cantilever slab (RS1_RC Ledge) according to BS8110:2000. Key details include: the slab thickness is 175mm, the effective depth is 145mm, the main span length is 1.85m, and the factored load is 11.1 kN/m^2. Reinforcement details and checks are provided for bending capacity, shear capacity, and deflection. The provided reinforcement meets code requirements for strength and serviceability.
This document summarizes the design of a cantilever slab (RS1_RC Ledge) according to BS8110:2000. Key details include: the slab thickness is 175mm, the effective depth is 145mm, the main span length is 1.85m, and the factored load is 11.1 kN/m^2. Reinforcement details and checks are provided for bending capacity, shear capacity, and deflection. The provided reinforcement meets code requirements for strength and serviceability.
Design Code : BS8110:2000 Prepared By : Date : 7/4/2020 Project : Checked By : Job ID :
Cantilever Slab Design (Based on BS8110:2000-Part1)
*********************************** Slab Marking = RS1 _RC Ledge DESIGN INFORMATION Material Data Concrete Strength, fcu = 30 N/mm2 Steel Strength of Bent-up Bars, fyb = 460 N/mm2 Steel Strength of Stirrups, fys = 460 N/mm2 Concrete Desity, = 24 kN/m3 Aggregate Size, hagg = 20 mm Slab Data P Slab Thickness, h = 175 mm Top Cover = 25 mm Bottom Cover = 25 mm Effective Depth from Bottom, d = 145 mm L Effective Depth for Top, d' = 30 mm Main Span Length, L = 1.85 m Loading Analysis Self Weight of Slab = 4.2 kN/m2 Finishing+Ceiling = 2.0 kN/m2 M&E Service Load = 0.0 kN/m2 Brick Wall = 0.0 kN/m2 Column Point Load PDL = 0.0 kN = 0.0 kN/m2 Total Dead Load, DLT = 6.2 kN/m2 Check Spacing Imposed Live Load, LL = 1.5 kN/m2 smin = hagg+5 or db Column Point Load PLL = 0.0 kN = 10 mm = 0.0 kN/m2 smax = 3d or 750 Total Live Load LLT = 1.5 kN/m2 = 430 mm Total Factored Load, 1.4 DLT+1.6LLT = 11.1 kN/m2 [OK] Factored Shear Force, Vu = 20.5 kN Factored Bending Moment, Mu = 19.0 KNm/m Provided Reinforcement Details Provided As Main Bar: Span 1T - 10 @ 100 mm = 785 mm2/m Distribution Bar: Span 1T - 10 @ 200 mm = 393 mm2/m
DESIGN REINFORCEMENT FOR BENDING
2 K=Mu/fcubd = 0.03 < 0.156 Compression Steel is not Required. & Use only As,min for Compression Steel. Distribution Bar: As,min = 0.13/100 *b *h = 228 mm2/m (For High Strength Steel) As,min = 0.24/100 *b *h = 420 mm2/m (For Mild Steel) As,prov'd = 393 mm2/m > As,min [OK] z = d[0.5+√(0.25-K/0.9)] = 140 mm = 0.97 d > 0.95d Main Bar: As,req'd = Mu/0.87 fy z = 344 mm2/m As,prov'd = 785 mm2/m > As,req'd [OK] Section : RS1 Type : Slab Design Design Code : BS8110:2000 Prepared By : Date : 7/4/2020 Project : Checked By : Job ID : CHECK SHEAR At Support, Shear Stress, v = Vu/bd = 0.14 N/mm2 ≤ 0.8√fcu Limit Shear stress, 0.8√fcu < 5 N/mm2 = 4.38 N/mm2 [OK] At Distance "d", Vd = 17.3 KN vd=Vd / bd = 0.12 N/mm2 100 As / bd = 0.54 % Concrete Shear Stress, vc = 0.71 N/mm2 > vd [OK] Shear Reinforcement is not required. Check vc<vd<vc+0.4 If Shear Reinforcement is required [Skip This Step] vc + 0.4 = 1.11 N/mm2 > vd Norminal Shear Reinforcement is required. Avs,nom/sv = 0.4*b / 0.87 fys = 1.00 mm2/mm Provide Shear Links at Support 1T - 0 @ 0 mm Avs,prov'd / s = ---- mm2/mm CHECK DEFLECTION Basic Span/Depth Ratio = 7 (For Cantilever) Moment Distribution Factor, βb = 1.0 M/bd^2 = 0.90 fs=2/3fy(AsReq'd/As prov'd) + 1/βb = 135.3 N/mm2 2 Modification Factor, M.Ftension = 0.55+(477-fs)/(120(0.9+M/bd )) = 2.13 > 2.0 100As'prov'd/bd = 0.00 (For Compression Steel) Modification Factor, M.FComp = 1+(100As'prov'd/bd)/(3+100 As'prov'd/bd) = 1.00 < 1.5 Allowable Span-Effective Depth ratio, L/d = 14.00 Actual L/d = 12.76 < Allowable L/d [OK]
Methodology For Definition of Bending Radius and Pullback Force in HDD Operations Danilo Machado L. Da Silva, Marcos V. Rodrigues, Asle Venås Antonio Roberto de Medeiros