Professional Documents
Culture Documents
DESCRIPTION PACKAGING
MasterRheobuild 3045 is available in, 1000ltr
MasterRheobuild 3045 is formulated from
synthetic polymers specially designed to impart bulk.
rheoplastic qualities to concrete.
A rheoplastic concrete is a fluid concrete, easily
TYPICAL PROPERTIES*
flowing, but at the same time free from
segregation and bleeding having the same w/c ra Colour: Dark brown liquid
tio as that of a low slump concrete without
Specific gravity: 1.20 + 0.03 at 24°C
Air-
admixture. MasterRheobuild 3045 is chloride entrainment:
Maximum 1%
free Chloride
Nil to BS 5075
content:
ADVANTAGES Nitrate content: Nil
0°C; can be reconstituted if
MasterRheobuild 3045 considerably improves Freezing point:
stirred after thawing
the properties of fresh and hardened concrete.
PRIMARY USES STANDARDS
• Microsilica concrete ASTM C 494 Type D and G
• Mass concrete pours BS 5075 Part 1 and 3
• Readymixed concrete
• Longdistance transport DOSAGE
• Pumped concrete Optimum dosage of MasterRheobuild 3045
• Casting in hot climates. should be determined in trial mixes. As a guide,
the following dosages are recommended as a start
TO OBTAIN
ing point for any trial: In normal concrete, a dosa
• Reduced thermal peaks ge of between 0.6 3.0 ltr/100kg of cement.
• High workability for longer periods Dependent upon mix requirement, it is possible to
• Lower pumping pressure use a higher dosage of MasterRheobuild 3045
• Delayed setting with longer workability without causing any adverse effects upon the
• Higher ultimate strengths concrete. Please consult Master Builders Solutions
• Reduced permeability Technical Services Department for further information.
• Improved durability
DISPENNSING
DISPENSING
COMPATIBILITY MasterRheobuild 3045 is a readytouse liquid
MasterRheobuild 3045 is compatible with which is dispensed into the concrete together with
the mixing water. The plasticising effect and water reduc
all cements and most airentraining agents
tion are higher if the admixture is added to the con
meeting the ASTM standards. The addition
crete after 50 to 70% of the mixing water has been
of MasterRheobuild 3045 and MasterAir
added. The addition of MasterRheobuild 3045 to dry
111 (airentraining agent) to concrete is
aggregate or cement is not recommended. Automatic
recommended where it is required to withst
dispensers are available.
and freezing and thawing cycles.
MasterRheobuild 3045 ensures that rheoplastic
concrete remains workable in excess 2 hours at
+20°C.
MBS Construction Chemicals Egypt (S.A.E), Business Park A, Building A1, Cairo Festival City, Ring Road, New Cairo, Egypt
Hotline: 15560, Phone: +202 2128 7800, Fax: +202 2128 7801
Website: https://www.master-builders-solutions.com/en-eg