Professional Documents
Culture Documents
R0 STR 1st Slab MR Jaising Pandit
R0 STR 1st Slab MR Jaising Pandit
FB1
FB1 230 X 380 2-12 DIA 3-12 DIA - - 8 dia - 150mm c/c 8 dia - 175mm c/c
open S2
FB2 230 X 380 2-12 DIA 2-12 DIA 1-12 DIA 1-12 DIA 8 dia - 150mm c/c 8 dia - 200mm c/c
FB2
FB4
FB4
S4 FB2A 150 X 450 2-12 DIA 2-16 DIA 1-12 DIA 2-12 DIA 8 dia - 150mm c/c 8 dia - 200mm c/c
HB1
FB3
FB2 S1 1-12 DIA
FB3 230 X 380 2-12 DIA 2-16 DIA 2-12 DIA 8 dia - 125mm c/c 8 dia - 150mm c/c
FB3
HB0
HB1
S2 FB4 230 X 450 2-12 DIA 3-12 DIA 1-12 DIA 2-12 DIA 8 dia - 125mm c/c 8 dia - 150mm c/c
HB1
S1
C10 FB5 230 X 450 3-12 DIA 3-12 DIA 1-12 DIA 2-12 DIA 8 dia - 100mm c/c 8 dia - 150mm c/c
230X530
C9 FB4 C11
230X450 230X450
FB6 230 X 450 2-12 DIA 3-12 DIA 1-12 DIA 2-12 DIA 8 dia - 100mm c/c 8 dia - 150mm c/c
FB4
(Z-SHAPED BEAM)
1st
SC Mid FB7 230 X 450 2-12 DIA 3-12 DIA - 2-12 DIA 8 dia - 150mm c/c 8 dia - 200mm c/c
FB1
landing
FB0
open open FB8 230 X 600 3-12 DIA 2-12DIA 2-12 DIA 2-16 DIA 8 dia - 125mm c/c 8 dia - 150mm c/c
HB1
FB6
ZB
SC open SC FBR0 230 X 380 3-12 DIA 3-12 DIA - - 8 dia - 100mm c/c 8 dia - 100mm c/c
FBR0 FBR1 230 X 450 6-12 DIA 4-12 DIA - - 8 dia - 90mm c/c 8 dia - 90mm c/c
SC 2nd
C8 FB3 Mid
230X380
C6 C7
FBR2 230 X 600 6-16 DIA 5-16 DIA - - 10 dia - 80mm c/c 10 dia - 90mm c/c
FB2A landing
230X450 230X450
HB0 150 X Slab D 2-10 DIA 2-10 DIA - - 8 dia - 125mm c/c 8 dia - 125mm c/c
A B
HB0
S4 S1 HB1 230 X Slab D 2-12 DIA 2-12 DIA - - 8 dia - 125mm c/c 8 dia - 125mm c/c
FB6
FB1
FB4
CS S2 ZB 230 X 380 3-12 DIA 3-12 DIA - - 8 dia - 150mm c/c 8 dia - 150mm c/c
HB1 SCHEDULE OF 1ST SLAB. M20 GRADE OF CONCRETE
Steel Along Extra Top - L/4
Slab Thickness Remark
Width Length along width along length
FB5
C5 FB3
C4
230X450 S1 125 mm 08 mm @ 100 c/c 08 mm @ 100 c/c 08 mm @ 200 c/c --- One Way bent
230X450
FB6 8dia@125c/c
S2 125 mm 08 mm @ 150 c/c 08 mm @ 150 c/c 08 mm @ 300 c/c --- One Way 300mm
S3 chimta bars
S3 125 mm 08 mm @ 150 c/c 08 mm @ 175 c/c 08 mm @ 300 c/c 08 mm @ 350 c/c Two Way
S4 125 mm 08 mm @ 150 c/c 08 mm @ 150 c/c 08 mm @ 300 c/c 08 mm @ 300 c/c Two Way
CS
FB3
S5 125 mm 08 mm @ 125 c/c 08 mm @ 150c/c 08 mm @ 250 c/c 08 mm @ 300 c/c Two Way
S5 C2 FB2 C3
125 thk
230X530 230X450 SC 125 mm 08 mm @ 150 c/c 10 mm @ 100 c/c --- 10 mm @ 100 c/c STAIRS SECTION A-B
CS 08 mm @ 125 c/c 08 mm @ 125 c/c --- --- CANTILEVER
FBR2
S2 A NOTE : Alternate B/U of one span shall extend to L/4 of other span. IMPORTANT NOTES :-
LEGENDS: 1. All work shall be strictly executed as per the drawing.
C1 HB1 FB7 2. Structure is designed for G+2 (3 SLABS) only.
230X450 BEAM AT SLAB LVL 3. Concrete Grade M20 and Steel Fe500 shall be used.
FBR1
MID LANDING 4. Load of Bricks for partition walls are considered for design.
CS LEVEL BEAM 5. Take permission from structural engineer before concreting at site.
B 6. Clear Cover to R/F bars shall be - Column 40mm , Footings 50mm
FB7 SUNK SLAB 7. Developement/Lap length shall be used as 50 times dia of bar.
STRUCTURAL LAYOUT AT FIRST FLOOR LEVEL BEAMS 8. Stripping time of formwork Shall be as per I.S.456-2000.
(1ST SLAB LEVEL) CANTILEVER SLAB 9. False work/ Shuttering Stability is responsibility of contractor.
AT BEAM BOTTOM 10. Live load considered over these slab is 2.25 kN/m2
11. If any Special Loads are there kindly inform to structural engineer before applying.
End bent to All 12. Any descripency shall be asked and discussed to Structural Engineer.
Alt. bent up Steel continue from one span to other Top,Bottom &
Extra Top Bars
Continue 13. Structure is designed only for Gravity Loads.
extra top
(d=depth of beam) Column links at
Alt. Bent up bars Ld=Development upto L/4
0.3L1 0.3L2 end zone stirrups Rest span column-beam junction are necessary TITLE
Length ( L/4 ) stirrups (Middle zone) Ld=50xbar dia