Professional Documents
Culture Documents
7120 FRM Three Point Hitch Frame
7120 FRM Three Point Hitch Frame
SMCS CODES
Use component code 7120 Three Point Hitch. Use modifier code FRM Frame.
7120 - FRM -010 - Remove and Install Three Point Hitch Frame
LABOR
INCLUDES: Labor to remove and install the component. Includes all Start By jobs as shown in the D&A
manual.
EXCLUDES: Excessive labor for removal of pins due to poor maintenance such as, having to burn pins
out for removal.
PARTS
INCLUDES: All parts as necessary to be represented by a non Cat part of a predetermined cost. See Chart
for specific costs.
EXCLUDES: Fluids, lines, hoses. Any parts due to poor maintenance or a failure.
LABOR TIME: See chart for labor times.
7120 - FRM - 007 - Recondition After Failure Three Point Hitch Frame
LABOR
INCLUDES: Labor for 80% replacement of the component. Use the same labor hours as the 020
Recondition job.
EXCLUDES: Labor to replace lines and hardware if they are not part of the consist.
PARTS
INCLUDES: The group level parts consist at 80% except for cylinder groups (covered elsewhere).
EXCLUDES: Any cylinder, lift arm or loader frame groups in the consist of the group level component.
LABOR TIME: See Chart. (The labor time should be the same as the labor time on the 020 Recondition
job)