Each of the above jobs will consist of the following:
Each Job should have SMU's For both 1st and 2nd Intervals, a labor time, a component group number input in the Group Number Field, and a complete parts list with the exception of the Remove & Install job. When there are two or more of a component, we will use the EACH quantity modifier and enter the total number of components in the QUANTITY column. The Labor Code for RECONDITION and RECONDITION AFTER FAILURE will be SHP, while the Labor Code for REMOVE & INSTALL WILL BE FLD.
SMCS CODES Use 4267 Parking Brake. Use appropriate job codes and quantity codes to describe the job as needed.
4267-010 - Remove and Install Parking Brake
LABOR INCLUDES: Labor for remove & install of the component. Includes Start By jobs as shown in the D&A Manual. EXCLUDES: Labor to replace mounting hardware, or excessive labor for removal of component due to any type of failure. Cleaning due to excessive exposure to extreme conditions such as dust and debris. Excessive labor caused by rust and corrosion. PARTS INCLUDES: All parts as necessary to be represented by a non Cat part of a predetermined cost. See Chart for specific costs. EXCLUDES: Mounting hardware, fluids and lines. LABOR TIME: See chart for labor times
4267-020 - Recondition Parking Brake
LABOR INCLUDES: Labor to replace individual wear parts as follows: Brake lining or pad, springs and seals as needed. EXCLUDES: Labor to replace any non wear components due to poor maintenance or a failure. PARTS INCLUDES: All seals, brake lining or brake pad and springs as needed. In the event there is no consist, select the group level component at 100%. EXCLUDES: Mounting hardware, lines, fittings and any non wear parts. LABOR TIME: See chart for labor times.
4267-007 - Recondition After Failure Parking Brake
LABOR INCLUDES: Labor for 100% replacement of the component. In the event the group level component is not serviced, put 80% usage in the entire consist and change the labor time to equal the Recondition job. EXCLUDES: Labor to replace fittings. PARTS INCLUDES: Select the group level component at 100%. In the event the group level component is not serviced, there will be 80% usage on the entire consist. EXCLUDES: Fittings. LABOR TIME: See chart for labor times. The labor time should equal the labor time on the 020 Recondition job if usage is 80% of consist.