Professional Documents
Culture Documents
PRODUCTS
INDEX
Accesories
Accesories >>
Index >>
EXPLOSIVES FAMILIES
Bulk >>
MAXAM provides a very comprehensive range of Bulk Products for
matching our more demanding customer’s necessities giving optimal
successfully solutions to mines, quarries, tunneling projects, civil works all
worldwide.
Packaged >>
MAXAM’s packaged explosives have been designed for offering the best
solutions in a worldwide range of customer’s necessities.
BULK EXPLOSIVES
DESCRIPTION
The RIOFLEX MX Series is an
RIOFLEX MX
ammonium nitrate based family of
bulk watergel explosives
representing the latest development
10000
in bulk technology.
RIOFLEX MX 10000 is a 100% RIOFLEX Matrix
RIOFLEX MX is a cross-linked
product and can be pumped at a rate of up to
product which increases its water
250 Kg/min.
resistance and reduces product
migration through cracks.
Due to its low water content, RIOFLEX MX 10000 is a higher energetic product that
The RIOFLEX MX Series can be maximizes Shock Energy generation making RIOFLEX MX 10000 the ideal product to
produced on the bench at a wide optimise rock fragmentation.
variable average in-hole density
range, extending from 1,0 to 1,32 RIOFLEX MX 10000 provides superior water resistance.
g/cm3
APPLICATIONS
RIOFLEX MX Series has been
specifically designed for quarry,
RIOFLEX MX
construction and medium scale
open pit mining operations. 5000
The RIOFLEX MX Series can be RIOFLEX MX 5000 is a 50% RIOFLEX Matrix
augered at a rate of up to and 50% ANFO and can be augered at a rate
450 Kg/min, or pumped at a rate of of up to 450 Kg/min.
up to 250 Kg/min.
Due to its low water content, RIOFLEX MX 5000 is a higher energetic product with
increased Heave Energy generation making RIOFLEX MX 5000 an ideal product to maximize
the displacement of the rock mass.
RIOFLEX MX 5000 provides water resistance when augering into dewatered holes.
2201000RIOFLEX_MXS00
RIOFLEX MX SERIES
Technical Characteristics
(Nominal Values)
RIOFLEX MX RIOFLEX MX RIOFLEX MX
10000 7000 5000
Velocity of Detonation* (m/s) 3700 - 7200 3500 - 7200 3400 - 7150
RELATIVE EFFECTIVE ENERGY1 (%)
Relative Weight Strength 106 - 122 114 - 130 118 - 133
Relative Bulk Strength 133 - 202 142 - 211 148 - 214
Gas Volume (L/kg) 1024 1002 998
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_MXS00
RIOFLEX MX 10000
Flexible Density Mechanically Sensitised Cross-linked Bulk Watergel Explosive
www.maxam.net
RIOFLEX MECHANICAL
DESCRIPTION
RIOFLEX MX 10000 is an ammonium
nitrate based family of Bulk
Watergel explosives representing
the latest development in bulk
technology.
APPLICATIONS
RIOFLEX MX 10000 has been
specifically designed for quarry,
construction and open pit mining
operations. The RIOFLEX MX Series can be produced on the bench with a wider range
of densities to accommodate improved fragmentation and expanded
drilling patterns. Its wide variable average density range extends from 1,0
Advantages to 1,32 g/cm3.
Flexibility through variable density. RIOFLEX MX 10000 can be pumped at a rate up to 250 Kg/min.
Water resistant.
Higher energy due to the low water RIOFLEX MX 10000 has inhibiting qualities in its formulation which allows
content. it to be used in reactive ground after testing.
Maximizes shock energy generation
potentially optimizing rock
fragmentation. SAFETY
Inhibiting qualities allow for use in Incorrect application of RIOFLEX MX 10000 may result in high levels of
reactive ground after proper testing. undesirable post-blast fumes.
Cross-linking process which gels Ground Temperature - Suitable for use in ground temperatures between
and increases water resistance. 0ºC-55ºC.
Can be manufactured with any type
of Ammonium Nitrate, reducing Reactive materials - If RIOFLEX MX 10000 is to be applied in any known
porous prill AN dependency. or potentially reactive material a testing program must be undertaken
Potentially reduce NOx Fumes before use of RIOFLEX MX 10000 to ensure the inhibiting action of the
formation. product is sufficient for the intended application, otherwise MAXAM
accepts no responsibility for any loss or responsibility arising from use of
RIOFLEX MX 10000 in reactive material.
2201000RIOFLEX_MX1000
RIOFLEX MX 10000
Technical Characteristics
(Nominal Values)
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_MX1000
RIOFLEX MX 7000
Flexible Density Mechanically Sensitised Cross-linked Bulk Watergel Explosive
www.maxam.net
RIOFLEX MECHANICAL
DESCRIPTION
RIOFLEX is an ammonium nitrate
based family of bulk watergel
explosives representing the latest
development in bulk technology.
APPLICATIONS
RIOFLEX MX 7000 has been
specifically designed for quarry, RIOFLEX MX 7000 can be produced on the bench with a wider range of
construction and medium scale densities to accommodate improved fragmentation and expanded drilling
open pit mining operations. patterns. Its wide variable average density range extends from 1,0 to 1,30
g/cm3.
2201000RIOFLEX_MX0700
RIOFLEX MX 7000
Technical Characteristics
(Nominal Values)
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_MX0700
RIOFLEX MX 5000
Flexible Density Mechanically Sensitised Cross-linked Bulk Watergel
www.maxam.net
RIOFLEX MECHANICAL
DESCRIPTION
RIOFLEX is an ammonium nitrate
based family of bulk watergel
explosives representing the latest
development in bulk technology.
APPLICATIONS
RIOFLEX MX 5000 has been
specifically designed for large
quarry, construction and open pit
The RIOFLEX MX Series can be produced on the bench at a wide variable
mining operations.
average density range extending from 1,0 to 1,28 g/cm3.
Advantages RIOFLEX MX 5000 has inhibiting qualities in its formulation which allows
Flexibility through variable density it to be used in reactive ground after testing.
High shock energy and Heave
Energy generation. SAFETY
Superior water resistance when Incorrect application of RIOFLEX MX 5000 may result in high levels of
augering into dewatering boreholes. undesirable post-blast fumes.
Inhibiting qualities allow for use in Ground Temperature - Suitable for use in ground temperatures between
reactive ground after proper testing 0ºC-55ºC.
Cross-linking process which gels Reactive materials - If RIOFLEX MX 5000 is to be applied in any known
and increase water resistance. or potentially reactive material a testing program must be undertaken
Can be manufactured with any type
of Ammonium Nitrate, reducing before use of RIOFLEX MX 5000 to ensure the inhibiting action of the
porous prill AN dependency. product is sufficient for the intended application, otherwise MAXAM
Potentially reduce NOx Fumes accepts no responsibility for any loss or liability arising from use of RIOFLEX
formation. MX 5000 in reactive material.
2201000RIOFLEX_MX0 00
RIOFLEX MX 5000
Technical Characteristics
(Nominal Values)
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_MX0 00
RIOFLEX GX SERIES
Flexible Density Gassed Cross-linked Bulk Watergel Explosive
DESCRIPTION
The RIOFLEX GX Series is an
RIOFLEX GX
ammonium nitrate based family of
bulk watergel explosives
representing the latest development
10000
in bulk technology.
RIOFLEX GX 10000 is a 100% RIOFLEX Matrix
RIOFLEX GX is a cross-linked product and can be pumped at a rate of up to
product which increases its water 450 Kg/min.
resistance and reduces product
migration through cracks.
Due to its low water content, RIOFLEX GX 10000 is a higher energetic product that
The RIOFLEX GX Series can be maximizes Shock Energy generation making RIOFLEX GX 10000 the ideal product to
produced on the bench at a wide optimise rock fragmentation.
variable average in-hole density
range, extending from 0,85 to 1,32 RIOFLEX GX 10000 provides superior water resistance.
g/cm3.
RIOFLEX GX 5000 provides water resistance when augering into dewatered holes.
2201000RIOFLEX_ X 00
RIOFLEX GX SERIES
Technical Characteristics
(Nominal Values)
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_ X 00
RIOFLEX GX 10000
Flexible Density Gassed Cross-linked Bulk Watergel Explosive
www.maxam.net
RIOFLEX GASSED
DESCRIPTION
RIOFLEX GX 10000 is an ammonium
nitrate based family of Bulk
Watergel explosives representing
the latest development in bulk
technology.
APPLICATIONS
RIOFLEX GX 10000 has been
specifically designed for large scale
open pit and quarry mining
operations.
RIOFLEX GX 10000 can be produced on the bench with a wider range of
densities to accommodate improved fragmentation and expanded drilling
patterns. Its wide variable average density range extends from 0,85 to 1,32
g/cm3.
Advantages
Flexibility through variable density. RIOFLEX GX 10000 can be pumped at a rate up to 450 Kg/min.
Higher energy due to the low
water content. RIOFLEX GX 10000 has inhibiting qualities in its formulation which allows
Water resistant. it to be used in reactive ground after testing.
Inhibiting qualities allow for use
in reactive ground after testing.
Cross-linking process which gels SAFETY
and increases water resistance. Incorrect application of RIOFLEX 10000 may result in high levels of
Has a wider range of densities undesirable post-blast fumes.
than emulsion products. Ground Temperature - Suitable for use in ground temperatures between
Can be manufactured with any type
of Ammonium Nitrate, reducing 0ºC-55ºC.
porous prill AN dependency. Reactive materials - If RIOFLEX GX 10000 is to be applied in any known
Potentially reduces NOx fumes or potentially reactive material a testing program must be undertaken before
formation. use of RIOFLEX GX 10000 to ensure the inhibiting action of the product is
Pumping rate of up to 450 Kg/min sufficient for the intended application, otherwise MAXAM accepts no
responsibility for any loss or liability arising from use of RIOFLEX GX 10000
in reactive material.
2201000RIOFLEX_ X1000
RIOFLEX GX 10000
Technical Characteristics
(Nominal Values)
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_ X1000
RIOFLEX GX 7000
Flexible Density Gassed Cross-linked Bulk Watergel Explosive
www.maxam.net
RIOFLEX GASSED
DESCRIPTION
RIOFLEX is an ammonium nitrate
based family of bulk watergel
explosives representing the latest
development in bulk technology.
APPLICATIONS
RIOFLEX GX 7000 has been
specifically designed for large scale
open pit and quarry mining
operations. RIOFLEX GX 7000 can be produced on the bench with a wider range of
densities to accommodate improved fragmentation and expanded drilling
patterns. Its wide variable average density range extends from 0,85 to 1,30
g/cm3.
Advantages
Flexibility through variable density. RIOFLEX GX 7000 can be pumped at a rate up to 450 Kg/min.
Higher energy due to the low
water content. RIOFLEX GX 7000 has inhibiting qualities in its formulation which allows it
Water resistant.
Inhibiting qualities allow for use to be used in reactive ground after testing.
in reactive ground after testing.
Cross-linking process which gels SAFETY
and increases water resistance. Incorrect application of RIOFLEX 7000 may result in high levels of undesirable
Has a wider range of densities post-blast fumes.
than emulsion products.
Can be manufactured with any type Ground Temperature- Suitable for use in ground temperatures between
of Ammonium Nitrate, reducing 0ºC-55ºC.
porous prill AN dependency. Reactive materials - If RIOFLEX GX 7000 is to be applied in any known or
Potentially reduces NOx fumes potentially reactive material a testing program must be undertaken before
formation. use of RIOFLEX GX 7000 to ensure the inhibiting action of the product is
Pumping rate of up to 450 Kg/min
sufficient for the intended application, otherwise MAXAM accepts no
responsibility for any loss or liability arising from use of RIOFLEX GX 7000 in
reactive material.
2201000RIOFLEX_ X0 00
RIOFLEX GX 7000
Technical Characteristics
(Nominal Values)
Average In-hole Density** (g/cm3) 0,85 - 1,30
Velocity of Detonation* (m/s) 2900 - 7200
1
RELATIVE EFFECTIVE ENERGY (%)
Relative Weight Strength 104 - 130
Relative Bulk Strength 111 - 211
Gas Volume (L/kg) 1002
1) ANFO: Density 0,80 g/cm3, Effective energy 2260 kJ/kg
* VOD is dependent on application, diameter, confinement and density. The maximum value within the range is the ideal VOD.
** ANFO doping prill density or truck configuration may not allow for the density range specified. Please Contact MAXAM prior to commitment to a specific density range.
NOTE: The average density in the borehole is dependent on hole length.
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_ X0 00
RIOFLEX GX 5000
Flexible Density Gassed Cross-linked Bulk Watergel Explosive
www.maxam.net
RIOFLEX GASSED
DESCRIPTION
RIOFLEX is an ammonium nitrate
based family of bulk watergel
explosives representing the latest
development in bulk technology.
SAFETY
Advantages Incorrect application of RIOFLEX GX 5000 may result in high levels of
Flexibility through variable density. undesirable post-blast fumes.
Inhibiting qualities allow for use in Ground Temperature - Suitable for use in ground temperatures between
reactive ground after testing.
Cross-linking process which gels 0ºC-55ºC.
and increases water resistance. Reactive materials - If RIOFLEX GX 5000 is to be applied in any known
Can be produced at densities lower or potentially reactive material a testing program must be undertaken
than emulsion products. before the use of RIOFLEX GX 5000 to ensure the inhibiting action of the
Can be manufactured with any type product is sufficient for the intended application, otherwise MAXAM
of Ammonium Nitrate, reducing
porous prill AN dependency. accepts no responsibility for any loss or liability arising from use of RIOFLEX
Potentially reduces NOx fumes GX 5000 in reactive material.
formation.
Augering rate of up to 1000 Kg/min.
2201000RIOFLEX_ X0 00
RIOFLEX GX 5000
Technical Characteristics
(Nominal Values)
Average In-hole Density** (g/cm3) 0,85 - 1,28
Velocity of Detonation* (m/s) 2600 - 7150
RELATIVE EFFECTIVE ENERGY1 (%)
Relative Weight Strength 108 - 133
Relative Bulk Strength 115 - 214
Gas Volume (L/kg) 998
1) ANFO: Density 0,80 g/cm3,
Effective energy 2260 kJ/kg
* VOD is dependent on application, diameter, confinement and density. The maximum value within the range is the ideal VOD.
** ANFO doping prill density or truck configuration may not allow for the density range specified. Please Contact MAXAM prior to commitment to a specific density range.
NOTE: The average density in the borehole is dependent on hole length.
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all liability in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_ X0 00
RIOFLEX UG
Flexible Density Underground Bulk Watergel Explosive
www.maxam.net
RIOFLEX UNDERGROUND
DESCRIPTION
RIOFLEX is an ammonium nitrate
based family of bulk watergel
explosives representing the latest
development in bulk technology.
APPLICATIONS
Intended for underground tough
breaking conditions, hard rock
mining, such as Gold, Platinum and
other base minerals. Adjustable
RIOFLEX UG densities ensure less RIOFLEX underground application. RIOFLEX product density control.
product to store especially for
perimeter blasting control.
SAFETY
Advantages Incorrect application of RIOFLEX UG may result in high levels of undesirable
High energy bulk watergel. post-blast fumes.
Suited for hard rock mining, tough Ground Temperature - Suitable for use in ground temperatures between
breaking conditions. 0ºC-55ºC.
Completely water resistant. Reactive materials - If RIOFLEX UG is to be applied in any known or
Full range of densities provides low potentially reactive material a testing program must be undertaken before
and high energy product out of use of RIOFLEX UG to ensure the inhibiting action of the product is sufficient
single pumping unit. for the intended application, otherwise MAXAM accepts no responsibility
Wall control. for any loss or liability arising from use of RIOFLEX UG in reactive material.
Ideal for contour blasting.
Stored as an oxidizer.
2201000RIOFLEX_ 00
RIOFLEX UG
Technical Characteristics
(Nominal Values)
Average Density (g/cm3) 0,80 - 1,25
Velocity of Detonation* (m/s) 2500 - 6900
1
Relative Effective Energy (%)
Relative Weight Strength 93 - 118
Relative Bulk Strength 93 - 184
Gas Volume (l/kg) 1020
1) ANFO: Density 0,80 g/cm3, Effective energy 2260 kJ/kg
* VOD is dependent on application, diameter, confinement, and density. The maximum value within the range is the Ideal VOD.
RECOMMENDATIONS
Priming requirements - RIOFLEX UG is formulated to be booster sensitive and requires a minimum of a RIOPRIME 15g primer.
Water Resistance - Excellent water resistance and suitable for pumping into wet blastholes.
Sleep time - Up to three weeks in static ground water and dependent on ground conditions. Check with MAXAM before sleeping RIOFLEX UG for lengths off
time in excess of 7 days to ensure optimal performance. If RIOFLEX UG is to be applied in any known or potentially reactive materials, a testing program
must be undertaken before use of RIOFLEX UG to ensure the inhibiting action of the product is sufficient for the intended application. RIOFLEX matrix is
safe to store in approved containers.
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all responsibility in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_ 00
RIOFLEX UGX
Flexible Density Underground Bulk Watergel Explosive
www.maxam.net
RIOFLEX UNDERGROUND
DESCRIPTION
RIOFLEX is an ammonium nitrate
based family of bulk watergel
explosives representing the latest
development in bulk technology.
APPLICATIONS
Intended for underground tough
breaking conditions, hard rock
mining, such as Gold, Platinum and
other base minerals. Adjustable
RIOFLEX UGX densities ensure less RIOFLEX underground application. RIOFLEX product density control.
product to store especially for
perimeter blasting control.
2201000RIOFLEX_ X00
RIOFLEX UGX
Technical Characteristics
(Nominal Values)
Average Density (g/cm3) 0,80 - 1,25
Velocity of Detonation* (m/s) 2500 - 6900
1
Relative Effective Energy (%)
Relative Weight Strength 93 - 118
Relative Bulk Strength 93 - 184
Gas Volume (l/kg) 1020
1) ANFO: Density 0,80 g/cm3, Effective energy 2260 kJ/kg
* VOD is dependent on application, diameter, confinement, and density. The maximum value within the range is the Ideal VOD.
RECOMMENDATIONS
Priming requirements - RIOFLEX UGX is formulated to be booster sensitive and requires a minimum of a RIOPRIME 15g primer.
Water Resistance - Excellent water resistance and suitable for pumping into wet blastholes.
Sleep time - Up to three weeks in static ground water and dependent on ground conditions. Check with MAXAM before sleeping RIOFLEX UGX for lengths
off time in excess of 7 days to ensure optimal performance. If RIOFLEX UGX is to be applied in any known or potentially reactive materials, a testing program
must be undertaken before use of RIOFLEX UGX to ensure the inhibiting action of the product is sufficient for the intended application. RIOFLEX matrix is
safe to store in approved containers.
SAFETY WARNING
Read the Material Safety Data Sheet provided carefully before using RIOFLEX. MAXAM strongly recommends not to use RIOFLEX products with detonators and/or initiation systems supplied by other manufacturers
in the same blast and declines all responsibility in these cases.
RIOFLEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2201000RIOFLEX_ X00
RIOMEX MU
Underground Bulk Emulsion Explosive
www.maxam.net
APPLICATIONS
Intended for underground tough
breaking conditions, hard rock
mining, such as Gold, Copper and
other base minerals. RIOMEX
flexibility comes from the products
full density range allowing for
perimeter blasting control.
2 01000RIOMEX_M 00
RIOMEX MU
Technical Characteristics
Class 1.1D
Contact your local MAXAM
representative for further information.
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOMEX. MAXAM strongly recommends not to use RIOMEX products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOMEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2 01000RIOMEX_M 00
RIOMEX 7000 Bulk Doped Emulsion
www.maxam.net
APPLICATIONS
RIOMEX 7000 has been specifically
designed for mining, large quarry
and construction operations, for
use in wet and dry boreholes, to 1. 2.
provide an optimum compromise Customized Suitable for
density boreholes of
between Heave Energy generation control to 75 mm and
and Shock Energy generation, achieve larger
optimum diameters.
allowing the optimum equilibrium performance.
between fragmentation and mass
rock displacement.
2 01000RIOMEX_0700
RIOMEX 7000
Technical Characteristics
(Nominal Values)
Average Density Range (g/cm3) 1,00 - 1,25
Velocity of Detonation* (m/s) 3700 -6900
1
RELATIVE EFFECTIVE ENERGY (%)
Relative Weight Strength 106 - 119
Relative Bulk Strength 132 - 186
Gas Volume (L/kg) 1031
1) ANFO: Density 0,80 g/cm3,
Effective energy 2260 kJ/kg
* VOD is dependent on application, diameter, confinement, and density. The maximum value within the range is the Ideal VOD.
NOTE: The average density in the borehole is dependent on hole length.
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOMEX. MAXAM strongly recommends not to use RIOMEX products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOMEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2 01000RIOMEX_0700
RIOMEX 5000 Bulk Doped Emulsion
www.maxam.net
2301000RIOMEX_0500
RIOMEX 5000
Technical Characteristics
(Nominal Values)
Average Density Range (g/cm3) 1,20 - 1,27
Velocity of Detonation* (m/s) 3300 - 6200
1
RELATIVE EFFECTIVE ENERGY (%)
Relative Weight Strength 97 - 111
Relative Bulk Strength 146 - 176
Gas Volume (L/kg) 1020
1) ANFO: Density 0,80 g/cm3,
Effective energy 2260 kJ/kg
* VOD is dependent on application, diameter, confinement, and density. The maximum value within the range is the Ideal VOD.
NOTE: The average density in the borehole is dependent on hole length.
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOMEX. MAXAM strongly recommends not to use RIOMEX products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOMEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2301000RIOMEX_0500
RIOMEX 4000 Bulk Doped Emulsion
www.maxam.net
2301000RIOMEX_0400
RIOMEX 4000
Technical Characteristics
(Nominal Values)
Average Density Range (g/cm3) 1,00
Velocity of Detonation* (m/s) 2700 - 5400
1
RELATIVE EFFECTIVE ENERGY (%)
Relative Weight Strength 91
Relative Bulk Strength 114
Gas Volume (L/kg) 1005
1) ANFO: Density 0,80 g/cm3, Effective energy 2260 kJ/kg
* VOD is dependent on application, diameter, confinement, and density. The maximum value within the range is the Ideal VOD.
NOTE: The average density in the borehole is dependent on hole length.
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOMEX. MAXAM strongly recommends not to use RIOMEX products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOMEX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2301000RIOMEX_0400
RIOXAM ST
Ammonium Nitrate & Fuel Oil
www.maxam.net
RIOXAM
ANFO TYPE EXPLOSIVE
DESCRIPTION
RIOXAM ST is a blend of high quality
porous Ammonium Nitrate and Fuel
Oil explosive, safe and easy to
handle.
APPLICATION
RIOXAM ST is intended for use in
surface and underground operations
in dry boreholes. Cartridged RIOXAM
ST can be use in boreholes with
small quantity of water and/or
1. 2.
fissured rock. Prilled Plastic film
consistency wrap
for maximum cartridges for
RIOXAM ST is an excellent and cost pressure of use in
effective solution as column charge detonation. boreholes
containing
for blasting in quarries, mines and low quantities
construction works when charging of water.
dry boreholes.
TDS_RXAM_ST_EN_00_20130729
RIOXAM ST
SAFETY
USE: RIOXAM ST should be used, handled and stored with care, ensuring the product is kept away from flames and excessive heat sources.
FLAMMABLE ATMOSPHERES: RIOXAM ST is not intended for use in flammable or methane atmospheres.
REACTIVE MATERIALS: RIOXAM ST may react with pyritic material in the ground and create potentially hazardous situations. If RIOXAM ST
is to be applied in any known or potentially reactive materials a testing program must be undertaken before the use of RIOXAM ST to ensure
the inhibiting actions of the product are sufficient for the intended application, otherwise MAXAM accepts no responsibility for any loss or
liability arising from use of RIOXAM ST in reactive material.
DISPOSAL: The disposal of explosive material can be dangerous, ensure the appropriate safety measures have been applied according to the
instructions on the MSDS.
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOXAM. MAXAM strongly recommends not to use RIOXAM products with detonators and/or initiation
systems supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOXAM must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
TDS_RXAM_ST_EN_00_20130729
RIOFRAG™ Series Bulk Blasting Agent
www.maxam.net
Previously MINI PRILL BLENDS
Advantages
High Energy
Higher VOD than RIOXAM™
Highter Density than RIOXAM™
Greater Bulk Strength than
RIOXAM™
Improved Fragmentation
Expanded Patterns
Economical
RIOFRAG™ BLENDS are water
resistant
_RFR _ LE _E _ _201 07 1
RIOFRAG™ Series
Technical Specifications
Criteria 0/100 Blend Ratio 50/50 Blend Ratio 70/30 Blend Ratio
Relative Bulk Strength 1.28 1.42 0.88
Relative Weight Strength 1.00 1.32 0.83
Density (gm/cc) 1.03 1.36 1.34
Velocity of Detonation (ft/s) 16,700 (5,400 m/s) 16,400 (5,000 m/s) 16,700 (5,400 m/s)
Water Resistance Poor Excellent Excellent
Minimum Borehole Diameter 4” (100mm) 5” (127mm) 4” (100mm)
Priming Requirements 454g (1 lb) cast booster 454g (1 lb) cast booster 454g (1 lb) cast booster
Detonation Pressure (katm) 28 49 45
Blend Ratio is Emulsion % / RIOFRAG™ %
Exclusion of Responsibility
Products described in this bulletin are sold by the company without warranty, express, implied or statutory except as to merchantability, or as expressly stated. In no event shall the company be liable for
consequential damage or expenses incurred, directly or indirectly, by the use of any of the products or methods described herein. The products are intended for use by persons having technical skill, at their own
discretion or risk. The properties and characteristics stated and the methods discussed are based on research and experience and are believed to be accurate, but purchasers should apply such methods for their
particular purpose. The purchaser and/or user assumes all responsibility for any personal injury, property damage or other loss caused by or arising out of the use of the products described or the data contained
herein. The purchaser and/or user assumes full responsibility for compliance with federal, state and local regulations governing storage, handling and use of the products so described.
For further information about RIOFRAG™ Series or any of Maxam North America’s products and services please contact your sales representative or the plant/office listed below.
Distributor:
Contact your MAXAM
representative for further
information.
MAXAM North America
6975 Union Park Center, Suite 525
Salt Lake City, UT 84047
Tel. +1 801 233 6000
Fax +1 801 233 6004 (REV: 10/25/2012)
contact.us@maxam.net
_RFR _ LE _E _ _201 07 1
RIOXAM™ WR Water Resistant ANFO
Previously WR ANFO www.maxam.net
Advantages
Completely fills borehole
Optiumum results
Safe to handle
Free flowing
Low cost
Can be used in damp boreholes.
RIOXAM™ WR should be stored in a cool, dry, well ventilated
Always and Never magazine, and has a shelf life of three months when stored
Never pour RIOXAM™ WR into a properly.
borehole with a diameter lower than
76.2 mm (3 inches) RIOXAM™ WR deteriorates quickly when the temperature
cycles through 90°F (32°C).
Never initiate RIOXAM™ WR with
detonating cord RIOXAM™ WR is packaged in 50 lb polyethylene lined
multi-layered paper bags or 55 lb polyethylene water-proof
bags.
TDS_RXAM_WR_EN_US_20130731
RIOXAM™ WR
Technical Specifications
Density (gm/cc) 0.84
Relative Weight Strength 1.00
Relative Bulk Strength 0.97
Velocity of Detonation (5 In / 127 mm) 13,500 ft/s (4,115 m/s)
Water Resistance Good
Minimum Borehole Diameter 75 mm (3 in)
Recommendations of Use
Priming requirements: RIOXAM™ WR is booster sensitive and requires a 400g RIOBOOSTER™ DET cast booster for holes
above 102 mm (4 inches) in diameter and a 150g RIOBOOSTER™ DET cast booster in holes below 102 mm (4 inches)
in diameter. Smaller RIOBOOSTER™ DET may reduce the performance of the explosives and are not recommended with
this product. Additional primers should always be used where there is a risk of column disruption and/or column length
exceeding 12 m. RIOCORD™ downlines are not recommended for use with this product.
Water Resistance: RIOXAM™ WR is suitable for use in damp and dry ground conditions only.
Sleep Time: RIOXAM™ WR may have a sleep time of up to six (6) weeks in dry ground conditions. Check with your
MAXAM representative if you plan to sleep RIOXAM™ WR for more than 14 days.
This product is not suitable for use in any reactive ground conditions.
RIOXAM™ WR should only be used in ground temperatures between 0°C and 55°C.
Exclusion of Responsibility
Products described in this bulletin are sold by the company without warranty, express, implied or statutory except as to merchantability, or as expressly stated. In no event shall the company be liable for
consequential damage or expenses incurred, directly or indirectly, by the use of any of the products or methods described herein. The products are intended for use by persons having technical skill, at their own
discretion or risk. The properties and characteristics stated and the methods discussed are based on research and experience and are believed to be accurate, but purchasers should apply such methods for their
particular purpose. The purchaser and/or user assumes all responsibility for any personal injury, property damage or other loss caused by or arising out of the use of the products described or the data contained
herein. The purchaser and/or user assumes full responsibility for compliance with federal, state and local regulations governing storage, handling and use of the products so described.
For further information about RIOXAM™ WR or any of Maxam North America’s products and services please contact your sales representative or the plant/office listed below.
Distributor:
Contact your
MAXAM representative for
further information.
MAXAM North America
6975 Union Park Center, Suite 525
Salt Lake City, UT 84047
Tel. +1 801 233 6000
Fax +1 801 233 6004 (REV: 10/25/2012)
contact.us@maxam.net
TDS_RXAM_WR_EN_US_20130731
Index >>
PACKAGED EXPLOSIVES
APPLICATION
RIOGEL TRONER HE combines both 1. 2.
sensitivity and high energy. HDPE plasic Crosslinked
wrapping for providing
Its density makes it ideal for use in added rubber-like
wet boreholes, and makes it a viable abrasion consistency.
resistance.
option for the use as a bottom
charge for medium-hard rock and
for column charges in wet
boreholes.
TDS_RGEL_TR_HE-EN_00_20130807
RIOGEL TRONER HE
Technical Characteristics
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOGEL. MAXAM strongly recommends not to use RIOGEL products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOGEL must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
TDS_RGEL_TR_HE-EN_00_20130807
RIOGEL TRONER XE Extra Energy Cartridged Watergel
www.maxam.net
APPLICATION
The combination of a very high 1. 2.
density and energy gives RIOGEL HSPE plastic Crosslinked
wrapping for providing
TRONER XE a very high bulk energy added rubber-like
making this product an ideal choice abrasion consistency.
resistance.
for hard rock blasting in quarries,
mining and construction.
Technical Characteristics
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOGEL. MAXAM strongly recommends not to use RIOGEL products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOGEL must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
Advantages SAFETY
USE: RIOXAM should be used, handled and stored with care, ensuring the
Highly energetic product is kept away from flames and excessive heat sources.
#8 detonator sensitive. DISPOSAL: The disposal of explosive material can be dangerous, ensure
Water resistance. the appropriate safety measures have been applied according to the
Low NOx fumes generation. instructions on the MSDS.
Can be tampered in hole.
Excellent as a primer. STORAGE
To maintain the properties of MAXAM’s explosives, we recommend they
be stored in authorized deposits, in a cool dry place, with good ventilation.
1 01000RIOM X_00
RIOMAX HE
Technical Characteristics
(Nominal Values)
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOMAX. MAXAM strongly recommends not to use RIOMAX products with detonators and/or initiation
systems supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOMAX must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
1 01000RIOM X_00
RIOSPLIT WF
Pre-splitting Cap Sensitive Flexible Sleeve Cartridged Watergel
www.maxam.net
RIOSPLIT
PRE-SPLITTING
DESCRIPTION
RIOSPLIT WF is the result of the
most advanced developments in
pre-splitting technology.
APPLICATION
RIOSPLIT WF is specifically designed 1. 2.
Core of HDPE plastic
with suitable VOD and strength for detonating wrapping for
splitting and pre-splitting shots in cord to added
assure abrasion
Open cut mines, public works, complete resistance.
tunnels and quarries. product
detonation.
1 01000RIO LI _00
RIOSPLIT WF
Technical Characteristics
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOSPLIT. MAXAM strongly recommends not to use RIOSPLIT products with detonators and/or initiation
systems supplied by other manufacturers in the same blast and declines all responsibility in these cases.
RIOSPLIT must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
1 01000RIO LI _00
RIOHIT ST
High Energy Cartridged Emulsion
www.maxam.net
APPLICATION
RIOHIT ST has been design for
priming applications and as medium
density column explosive in quarries,
construction and mining operations.
RIOHIT ST is manufactured in a
variety of cartridge sizes to satisfy
a wide range of blasting
applications.
1. 2.
RECOMMENDATIONS FOR USE HDPE plastic Ideal choice
The high water resistance of RIOHIT wrapping for for Open Pit
added water and Quarry
ST allows for its use in wet and abrasion mining.
boreholes. Do not use in flammable resistance.
or methane atmospheres. This
product is detonator and RIOCORD
10 g/m sensitive. RIOHIT ST can be
used within the temperature range
of 0ºC and +50ºC and stored
between 5ºC and +30ºC. For further
information consult the Use Recommendations Sheet included inside the
boxes or packaging of the product and its respective Material Safety Data
Sheet.
SAFETY
Advantages USE: RIOHIT should be used, handled and stored with care, ensuring the
product is kept away from flames and excessive heat sources.
High cost effective emulsion
DISPOSAL: The disposal of explosive material can be dangerous, ensure
suitable for wide range of
the appropriate safety measures have been applied according to the
blasting applications.
instructions on the MSDS.
#8 Detonator and RIOCORD
10 g/m sensitive. STORAGE
Highly water resistant. To maintain the properties of MAXAM’s explosives, we recommend they
OH&S issues associated with be stored in authorized deposits, in a cool dry place, with good ventilation.
storage and handling of
nitroglycerin products eliminated.
Packaged in HDPE, high strength
film ideal for medium size
boreholes.
_R I _ _E _00_201 07 0
RIOHIT ST
Technical Characteristics
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOHIT. MAXAM strongly recommends not to use RIOHIT products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOHIT must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
_R I _ _E _00_201 07 0
RIOHIT LS
High Energy Low Water Content Cartridged Emulsion
www.maxam.net
APPLICATION
RIOHIT LS has been design to
provide excellent blast results in the
toughest applications, as hard rock
blasting with tight drilling patterns
used in underground operations.
_R I _L _E _00_201 07 0
RIOHIT LS
Technical Characteristics
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOHIT. MAXAM strongly recommends not to use RIOHIT products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOHIT must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
TDS_RHIT_LS_EN_00_20130730
RIOHIT AL
Extra Energy Cartridged Emulsion
www.maxam.net
APPLICATION
RIOHIT AL has been design for
priming applications, bottom
charges and as a high energy
column explosive in quarries,
construction and mining operations
for medium-hard rock blasting. Its
high detonation velocity makes it
an ideal primer for RIOXAM ANFO
family.
1. 2.
HDPE plastic Ideal choice
RIOHIT AL is manufactured in a wrapping for for Open pit
added water and Quarry
variety of cartridge sizes to satisfy and abrasion applications
a wide range of blasting resistance. requiring
extra energy.
applications.
Advantages SAFETY
USE: RIOHIT should be used, handled and stored with care, ensuring the
High energy emulsion suitable for product is kept away from flames and excessive heat sources.
wide range of blasting DISPOSAL: The disposal of explosive material can be dangerous, ensure
applications. the appropriate safety measures have been applied according to the
#8 Detonator and RIOCORD instructions on the MSDS.
10 g/m sensitive.
Highly water resistant. STORAGE
OH&S issues associated with To maintain the properties of MAXAM’s explosives, we recommend they
storage and handling of be stored in authorized deposits, in a cool dry place, with good ventilation.
nitroglycerin products eliminated.
Packaged in HDPE, high strength
film ideal for medium size
boreholes.
_R I _ L_E _00_201 07 0
RIOHIT AL
Technical Characteristics
UN Number 0241
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOHIT. MAXAM strongly recommends not to use RIOHIT products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOHIT must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
_R I _ L_E _00_201 07 0
RIOHIT™ 200 Series
Cross-Linked Booster Sensitive Emulsion Blend
Previously EMGEL® 200, 250 & 250 MS www.maxam-na.com
Advantages The RIOHIT™ 200 Series have a shelf life of one year when stored
Maintains consistency when package
properly; transportation, storage and handling must be in
is split or cut accordance with local, state and federal regulations.
Loading density is ideal for sinking
in wet holes
Cross-linked emulsion allows for The RIOHIT™ 200 Series are packaged in either Valeron® film
clean, easy handling and loading due or woven shot bags.
to firm consistency
Offered in a wide variety of lengths
and diameters The RIOHIT™ 200 Series have a minimum recommended booster
Booster sensitive formulation
of 1/2 pounds (227 grams).
RIOHIT™ 200 Series
Technical Specifications
RIOHIT™ 250 RIOHIT™ 250 MS
Criteria RIOHIT™ 200
Aluminized (AL) AL & Solid Sensitized
Available Energy (kJ/kg) 2,070 2,200 2,120
Relative Weight Strength 0.91 0.97 0.94
Relative Bulk Strength 1.28 1.36 1.31
Density (gm/cc) 1.16 1.16 1.16
Detonation Pressure (kbars) 94 103 98
Velocity of Detonation ft/s (m/s) 16,700 (5,100) 17,600 (5,400) 17,400 (5,300)
*Technical Specifications may vary slightly due to product size.
Exclusion of Responsibility
Products described in this bulletin are sold by the company without warranty, express, implied or statutory except as to merchantability, or as expressly stated. In no event shall the company be liable for
consequential damage or expenses incurred, directly or indirectly, by the use of any of the products or methods described herein. The products are intended for use by persons having technical skill, at their own
discretion or risk. The properties and characteristics stated and the methods discussed are based on research and experience and are believed to be accurate, but purchasers should apply such methods for their
particular purpose. The purchaser and/or user assumes all responsibility for any personal injury, property damage or other loss caused by or arising out of the use of the products described or the data contained
herein. The purchaser and/or user assumes full responsibility for compliance with federal, state and local regulations governing storage, handling and use of the products so described.
For further information about the RIOHIT™ 200 Series or any of Maxam North America’s products and services please contact your sales representative or the plant/office listed below.
Distributor:
Contact your
MAXAM representative for
further information.
MAXAM North America
6975 Union Park Center, Suite 525
Salt Lake City, UT 84047
Tel. +1 801 233 6000
Fax +1 801 233 6004 (REV: 3/30/2012)
contact.us@maxam.net
RIOHIT™ 600 SeriesCross-linked Detonator Sensitive Emulsion
Previously EMGEL® 600 www.maxam.net
HE, LD & B
RIOHIT™ 600 HE, LD & B are
high energy, cross-linked,
detonator sensitive emulsions.
Advantages The RIOHIT™ 600 Series have a shelf life of one year when
RIOHIT™ 600 HE & LD maintain
stored properly; transportation, storage and handling must
consistency when package is split or cut be in accordance with local, state and federal regulations.
Loading density is ideal for sinking in wet
holes
Cross-linked emulsion allows for clean, The RIOHIT™ 600 Series are packaged in either Valeron® film
easy handling and loading due to firm or PMP film cartridges.
consistency
Offered in Valeron® film in a variety of
diameters and lengths Hazardous Material Classification
Reliable and cap sensitive Explosive, Blasting, Type E
Suitable for underground use Class and Division 1.1D
RIOHIT™ 600 B has a high velocity of
detonation PG II, UN 0241
TDS_RHIT_600_EN_US_20130731
RIOHIT™ 600 Series
Technical Specifications
RIOHIT™ 600 LD
Standard Size Film Type Stick Weight Stick Count
Inches (mm) V = Valeron® / P = PMP Pounds (kg) per Case
2 x 16 (50 x 400) V 2.2 (1.0) 24 - 26
2.25 x 16 (58 x 400) V 2.3 (1.0) 19 - 22
2.5 x 16 (65 x 400) V 3.7 (1.7) 15
2.75 x 16 (70 x 400) V 4.6 (2.1) 12
3 x 16 (75 x 400) V 5.0 (2.3) 11
Case Size: 17.5” x 13.5” x 8.5” (445mm x 343mm x 216mm)
Exclusion of Responsibility
Products described in this bulletin are sold by the company without warranty, express, implied or statutory except as to merchantability, or as expressly stated. In no event shall the company be liable for
consequential damage or expenses incurred, directly or indirectly, by the use of any of the products or methods described herein. The products are intended for use by persons having technical skill, at their own
discretion or risk. The properties and characteristics stated and the methods discussed are based on research and experience and are believed to be accurate, but purchasers should apply such methods for their
particular purpose. The purchaser and/or user assumes all responsibility for any personal injury, property damage or other loss caused by or arising out of the use of the products described or the data contained
herein. The purchaser and/or user assumes full responsibility for compliance with federal, state and local regulations governing storage, handling and use of the products so described.
For further information about RIOHIT™ 600 HE, LD, B, or any of Maxam North America’s products and services please contact your sales representative or the plant/office listed below.
Distributor:
Contact your
MAXAM representative for
further information.
MAXAM North America
6975 Union Park Center, Suite 525
Salt Lake City, UT 84047
Tel. +1 801 233 6000
Fax +1 801 233 6004 (REV: 10/25/2012)
contact.us@maxam.net
TDS_RHIT_600_EN_US_20130731
RIOSPLIT™ EF
Detonator Sensitive Continuous Pre-split Emulsion
Also known as EMGEL® PS www.maxam-na.com
RIOSPLIT™ EF is a detonator
sensitive continuous pre-split
emulsion that is designed for
perimeter control applications.
RIOSPLIT™ EF is packaged in
Valeron® film.
Advantages
Suitable for surface and
underground applications
Packaged in Valeron® film
Detonator Sensitive
Detonating cord traced
increases detonation reliability.
RIOSPLIT™ EF
Technical Specifications
Available Energy (kJ/kg) 2,528
H
Relative Bulk Strength 1.89
Packaging
Exclusion of Responsibility
Products described in this bulletin are sold by the company without warranty, express, implied or statutory except as to merchantability, or as expressly stated. In no event shall the company be liable for
consequential damage or expenses incurred, directly or indirectly, by the use of any of the products or methods described herein. The products are intended for use by persons having technical skill, at their own
discretion or risk. The properties and characteristics stated and the methods discussed are based on research and experience and are believed to be accurate, but purchasers shoukd apply such methods for their
particular purpose. The purchaser and/or user assumes all responsibility for any personal injury, property damage or other loss caused by or arising out of the use of theproducts described or the data contained herein.
The purchaser and/or user assumed full responsibility for compliance with federal, state and local regulations governing storage, handling and use of the products so described.
For further information about RIOSPLIT™ EF or any of Maxam North America’s products and services please contact your sales representative or the plant/office listed below.
Distributor:
Contact your
MAXAM representative for
further information.
MAXAM North America
6975 Union Park Center, Suite 525
Salt Lake City, UT 84047
Tel. +1 801 233 6000
Fax +1 801 233 6004 (REV: 1/05/2012)
contact.us@maxam.net
RIODIN XE
Cartridged Extra Energy Dynamite
www.maxam.net
APPLICATIONS
RIODIN XE is distinguished by its
higher energy making it an ideal
solution for the most energy
demanding applications such as
extremely hard rock blasting in
1. 2.
quarries and construction. With its HDPE Plastic Simple access
high VOD, RIODIN XE is also the film cartridge area for
encasing. secure
optimum choice for underground insertion of
and tunnelling applications as well detonator.
as for seismic exploration.
STORAGE
To maintain the properties of MAXAM’s explosives, we recommend they be
stored in authorized magazines, in a cool dry place, with good ventilation.
TDS_RDIN_XE_EN_00_20130729
RIODIN XE
Technical Characteristics
UN Number 0081
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIODIN. MAXAM strongly recommends not to use RIODIN products
with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all liability in these cases.
RIODIN must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
TDS_RDIN_XE_EN_00_20130729
RIODIN HE
Cartridged High Energy Dynamite
www.maxam.net
APPLICATIONS
RIODIN HE is distinguished by its
higher energy that makes this
product an ideal solution for the
most energy demanding applications
such as extremely hard rock blasting
in quarries, construction, tunnelling
and underground mining. 1. 2.
HDPE Plastic Simple access
film cartridge area for
RIODIN HE can also be used in encasing. secure
priming applications, bottom charges insertion of
detonator.
and as a high-energy column
explosive.
SAFETY
Advantages USE: RIODIN HE should be used, handled and stored with care, ensuring
High energy. the product is kept away from flames and excessive heat sources.
Available in a variety of cartridge DISPOSAL: The disposal of explosive material can be dangerous, ensure
sizes. the appropriate safety measures have been applied according to the
Waxed paper or plastic encasing. instructions on the MSDS.
Low fumes generation.
High density. STORAGE
To maintain the properties of MAXAM’s explosives, we recommend they
be stored in authorized magazines, in a cool dry place, with good
ventilation.
TDS_RDIN_HE_EN_00_20130729
RIODIN HE
Technical Characteristics
Class 1.1D
Contact your local MAXAM
representative for further information.
UN Number 0081
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIODIN. MAXAM strongly recommends not to use RIODIN products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIODIN must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
TDS_RDIN_HE_EN_00_20130729
RIOPER G
Permissible Gelatinous Dynamite
www.maxam.net
RIOPER
PERMISSIBLE DYNAMITE
DESCRIPTION
RIOPER G is a nitroglycol based
gelatinous permissible explosive,
manufactured from oxidiser salts
and fuels and is #8 detonator
sensitive.
APPLICATIONS
RIOPER G has a gelatinous
consistency, high density and high
velocity of detonations. These
features provide the product to have
high detonation pressure that makes
it specifically suitable for hard rocks
and hard coal blasting in both wet
and dry borehole.
RIOPER G is classified as a
permissible explosive Type II 1.
according to Spanish Regulations, Simple access
area for
ITC 10.4.01 of RGNBSM. secure
insertion of
detonator.
RIOPER G contains special safety
features against methane
atmospheres and airbone coal dust
due to the ignition inhibitor added
to the product’s formulation.
2101000RIO ER_ 00
RIOPER G
Technical Characteristics
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOPER. MAXAM strongly recommends not to use RIOPER products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOPER must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
2101000RIO ER_ 00
RIOSEIS P
Pentolite Seismic Booster
www.maxam.net
RIOSEIS P
RSEISMIC
I O SPENTOLITE
EIS
DESCRIPTION
Seismic RIOSEIS P are specifically
made for seismic applications, with 1
its high density of (1,6 g/cm3) and
high velocity of detonation* (7,500 2
m/s). They are manufactured with a
rigid plastic cover and are detonator
sensitive
The Seismic RIOSEIS P composition
and high detonation pressure (225
Kbar) assures consistent performance
regardless of hydrostatic pressure,
making them ideal for use in
extreme conditions.
Seismic RIOSEIS P provide an
optimum balance between high and
low frequency signals essential to
achieve optimum interpretation and
resolution of seismic data.
1. 2.
Seismic RIOSEIS P are a more stable Shell design Plastic
product than dynamite and channel for interlocking
emulsions and are not affected by proper shell design
long lasting storage, provided they legwire for easy and
placement firm assembly.
are kept in proper dry storing and
conditions. initiation.
APPLICATION
Seismic RIOSEIS P attenuate low
frequencies and strengthen high
frequencies and reach peak speeds
of several millimeters and are the
optimal product for seismic
applications. RECOMMENDATIONS FOR USE
RIOSEIS P has been designed so that if extra energy is required they can
also be coupled together. RIOSEIS P must be initiated with a seismic
detonator (RIODET HP, RIODET XP)
Advantages SAFETY
USE: RIOSEIS P should be used, handled and stored with care, ensuring
Safe, reliable and user friendly. the product is kept away from flames and excessive heat sources.
Shell design protects detonator DISPOSAL: The disposal of explosive material can be dangerous, ensure
and legwires. the appropriate safety measures have been applied according to the
Variable size to suit application. instructions on the MSDS.
High detonation pressure output.
Oil and water resistant. STORAGE
Performs consistently regardless To maintain the properties of MAXAM’s explosives, we recommend they
of hydrostatic pressure. be stored in authorized deposits, in a cool dry place, with good ventilation.
2 01000RIO EI _ 00
RIOSEIS P
Performance Characteristics
UN Number 00 2
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOSEIS P. RIOSEIS P must not be used in flammable environments such
as methane or coal dust. MAXAM strongly recommends not to use RIOSEIS P products with detonators and/or initiation systems supplied by other manufacturers in the same
blast and declines all liability in these cases.
RIOSEIS P must be stored at moderate temperatures in a dry and well ventilated place.
DISCLAIMER AND LIMITATION OF LIABILITY
The information contained herein (the “Information”) is not exhaustive and subject to periodical review. The data contained herein may vary on account of the particular operating and maintenance conditions and
of external factors, such as humidity, temperature, or pressure. Maxam Europe, S.A. and/or its affiliates (“MAXAM”) do not warrant or make any representation regarding the accuracy or completeness of the
Information. MAXAM further reserves the right, in its sole discretion and without prior written notice, to modify the products described herein (the “Products”) and/or their specifications.
The use of the Products is an intrinsically dangerous activity and must, consequently, be restricted to qualified and trained users in possession of any necessary permits and licenses, and comply at all times with
appropriate safety and risk prevention measures and with the applicable law. The use, storage, or otherwise handling, of the Products may be subject to local regulations and restrictions, which must be examined
and observed by the user.
This document and any accompanying information (the “Documentation”) is not intended to constitute, and shall not be construed as, an offer or contractual commitment on MAXAM’s side. MAXAM expressly
disclaims any liability towards third parties with regard to the Documentation. For further information about the Products, please contact your distributor or sales representative directly.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
2 01000RIO EI _ 00
RIOSEIS™ DE P
Degradable Pentolite Boosters for Seismic Applications
Previously Maxprime® www.maxam.net
RIOSEIS™ DE P is a degradable
formulation. The pentolite
composition will degrade over
time eliminating potential
initiation risks should the
product not detonate at the
time of use.
RIOSEIS™ DE P should be
stored in a cool, well
ventilated magazine that is 1.1D Transportation Classification
approved for 1.1D explosives. Packaging
See backside for packaging details.
H
Advantages
Cap wells on top and bottom
Highly visible – bright green Hazardous Material Classification
High Velocity of detonation Boosters W
L
Available in three sizes Class and Division 1.1D
Degradable formulation PG II, UN 0042
TDS_RSEIS_DEP_EN_US_20130731
RIOSEIS™ DE P
Performance Characteristics
Detonation Pressure
Velocity of Detonation Density (gm/cc)
(kbars)
25,600 ft/s (7,800 m/s) 250 1.65
Technical Specifications
H
ALWAYS use cartridges and/or boosters that are physically compatible with the specific detonator design.
NEVER use a cast primer or booster if the hole for the detonator is too small.
Exclusion of Responsibility
Products described in this bulletin are sold by the company without warranty, express, implied or statutory except as to merchantability, or as expressly stated. In no event shall the company be liable for
consequential damage or expenses incurred, directly or in directly, by the use of any of the products or methods described herein. The products are intended for use by persons having technical skill, at their own
discretion or risk. The properties and characteristics stated and the methods discussed are based on research and experience and are believed to be accurate, but purchasers should apply such methods for their
particular purpose. The purchaser and/or user assumes all responsibility for any personal injury, property damage or other loss caused by or arising out of the use of the products described or the data contained
herein. The purchaser and/or user assumes full responsibility for compliance with federal, state and local regulations governing storage, handling and use of the products so described.
For further information about RIOSEIS™ DE P or any of Maxam North America’s products and services please contact your sales representative or the plant/office listed below.
Distributor:
Contact your MAXAM
representative for further
information.
MAXAM North America
6975 Union Park Center, Suite 525
Salt Lake City, UT 84047
Tel. +1 801 233 6000
Fax +1 801 233 6004 (REV: 10/25/2012)
contact.us@maxam.net
TDS_RSEIS_DEP_EN_US_20130731
Index >>
INITIATION SYSTEMS
RIONEL RIONEL
MILLISECOND
The RIONEL MS series has been
designed for use as a
down-the-hole detonator in 2
standard blasting scenarios.
20
manually in includes
order to Delay
achieve a
quicker MS Period,
Timing,
Length and
Advantages loading
operation.
500 ms
0000M000 12 m
Lot Number.
0101000RIO EL_M 0
RIONEL MS
Delay Time Length Units per Gross Weight Net Weight Tube
(ms) (m) box (kg) (kg) Colour
2 0 10 O
0
2 0 12 10 O
1 2
1 0 10 O
2 0 1 0 11 O
7 12 120 12 10 O
100 1 11 O
1 72 10 O
12
21 0 10 O
1 0 2 0 10 O
7 17 0 0 10 O
200 *Standard Length. Fastest available delivery time. Other lengths upon request. Unit packaging is in Coils.
265 m m
2 0
2 700
0 7 0
47 m
0m
m 4m
44
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using the RIONEL MS series detonators. RIONEL MS detonators must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIONEL products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all
liability in these cases.
RIONEL MS detonators must be stored at moderate temperatures in a dry and well ventilated place according to local regulations.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN.
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0101000RIO EL_M 0
RIONEL LP
Non Electric Long Period Delay Detonator
www.maxam.net
RIONEL RIONEL
LONG PERIOD
The RIONEL LP series has been
designed for use in underground 2
mining and tunnelling, both in non
flammable environments.
3. 4.
“J-Hook” to Water
ease its resistant
connection to label which
45
RIOCORD includes
(5 g/m Delay
Advantages
minimum).
LP
4500 ms
Period,
Timing,
Length and
Lot Number.
0000M000 6m
Safe, reliable and user friendly.
Safe against extraneous electric
currents.
5.
Shock tube designed to resist high The fastening
tensile strength and elongations, band is easy
to break
avoiding its damage under normal manually in
operating conditions. order to
achieve a
The design, colours, labels and quicker
packaging ease its visibility and loading
operation.
identification.
0101000RIO EL_L 02
RIONEL LP
0 2 0 12 10
1 100
2 200 1 0 10
00 7 1 0 10
00
*Standard Length. Fastest available delivery time. Other lengths upon request. Unit packaging is in Coils.
00
00
7 700
00
00
10 1000
12 1200
1 1 00
1 1 00
1 1 00
20 2000
2 2 00
0 000
00
0 000
00
0 000
00
0 000
70 7000
0 000
0 000
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using the RIONEL LP series detonators. RIONEL LP detonators must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIONEL products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all
liability in these cases.
RIONEL LP detonators must be stored at moderate temperatures in a dry and well ventilated place according to local regulations.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0101000RIO EL_L 02
RIONEL DDX
Non Electric Dual Delay Detonator
www.maxam.net
RIONEL RIONEL
DUAL DELAY
The RIONEL DDX series is composed
of a detonator and a connector in
the same unit. It includes both the
down-the-hole detonator and a
surface connector. It is equivalent
to using a RIONEL MS and a RIONEL
SCX together. 1
3. 4.
Colour coded Water
connector resistant
will accept label which
DDX
up to 6
tubes. 25 ms
includes
Delay Period,
Timing,
Advantages 500
0000M000
ms
12 m
Length and
Lot Number.
Safe, reliable and user friendly.
It allows quick connections in blasts
composed of a large amount of
blast holes.
Shock tube designed to resist high 5.
tensile strength and elongations, The fastening
band is easy
avoiding being damaged under to break
normal use conditions. manually in
Safe against extraneous electric order to
currents. achieve a
quicker
The design, colours, labels and loading
packaging ease its visibility and operation.
identification.
1 0 12 10 O
17 00 1 0 1 12 O
120 12 10 O
2 00
12 120 1 12 O
2 00 1 72 10 O
1 72 11 O
7 00
21 0 11 O
2 0 10 O
*Standard delay. Other delays upon request.
0 0 10 O
*Standard Length. Fastest available delivery time. Other lengths upon request.
Unit packaging is in Coils.
40 6 2 7
265 m m
50 6 O
60 6 4 O
70 6 4 5 O
0 6 5 05 O
47
0
m m
m m 00 6 7 2 O
4
44 **Non-Standard Length. Unit packaging is in Spools.
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using the RIONEL DDX series detonators. RIONEL DDX detonators must not be used in flammable
environments such as methane or coal dust. MAXAM strongly recommends not to use RIONEL products with detonators and/or initiation systems supplied by other manufacturers in the same blast and
declines all liability in these cases.
RIONEL DDX detonators must be stored at moderate temperatures in a dry and well ventilated place according to local regulations.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0101000RIO EL_ X02
RIONEL SCX
Non Electric Detonator Surface Connector
www.maxam.net
RSURFACE
I OCONNECTOR
NEL RIONEL
3. 4.
The fastening Water
band is easy resistant label
to break which
manually in scx includes
25
order to Delay Period,
achieve a Timing,
quicker Length and
loading ms Lot Number.
0101000RIO EL_ X0
RIONEL SCX
0 210 12 10
1 0 11
1 0 1 11
120 11
17 12 120 1 11
*Standard Length. Fastest available delivery time. Other lengths upon request. Unit packaging is in Coils.
100
1 0
200
Class
Contact your local MAXAM
11 1
representative for further information.
UN Number 0 0 0 00
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using the RIONEL SCX series detonators. RIONEL SCX detonators must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIONEL products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all
liability in these cases.
RIONEL SCX detonators must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0101000RIO EL_ X0
RIONEL LLX
Non Electric Lead in Line Detonator
www.maxam.net
RLEAD
I OINNLINE
EL RIONEL
3.
Water
resistant
label which
LLX includes
Delay
Advantages
Safe, reliable and user friendly.
0
0000M000
ms
100 m
Period,
Length and
Lot Number.
0101000RIO EL_LLX0
RIONEL LLX
100 1 17 12
*Standard Length. Fastest available delivery time. Other lengths upon request. Unit packaging is in Spools.
0
1 0 10
0 1 1
7 0 1 1
*Standard Length. Fastest available delivery time. Other lengths upon request. Unit packaging is in Spools.
Class
Contact your local MAXAM
11 1
representative for further information.
UN Number 0 0 0 00
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using the RIONEL LLX series detonators. RIONEL LLX detonators must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIONEL products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all
liability in these cases.
RIONEL LLX detonators must be stored at moderate temperatures in a dry and well ventilated place according to local regulations.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0101000RIO EL_LLX0
RIONEL BC
Non Electric Bunch Connector Detonator
www.maxam.net
RBUNCHI OCONNECTOR
NEL RIONEL
3. 4.
The fastening Water
band is easy resistant
to break label which
25
manually in includes
order to Delay
Advantages
achieve a
quicker
loading
BC
25 ms
Period,
Timing,
Length and
Safe, reliable and user friendly operation. Lot Number.
0000M000 6m
Safe against extraneous electric
currents.
Shock tube designed to resist high 5.
tensile strength and elongations, 0.6 meter
avoiding its damage under normal length of
6 gram / meter
operating conditions. detonating
Factory assembled components cord is factory
assembled and
minimizing field hook up time. provided on all
Colour coded connector blocks for RIONEL Bunch
Connectors.
quick delay time identification.
0101000RIO EL_ 02
RIONEL BC
0 120 7
*Standard Length. Fastest available delivery time. Other lengths upon request. Unit packaging is in Coils.
17
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using the RIONEL BC series detonators. RIONEL BC detonators must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIONEL products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all
liability in these cases.
RIONEL BC detonators must be stored at moderate temperatures in a dry and well ventilated place according to local regulations.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0101000RIO EL_ 02
RIOLINEShock Tube
www.maxam.net
Advantages
Safe, reliable and user friendly.
Safe against extraneous electric
currents.
Designed to provide high tensile
strength and resistance to
elongations, avoiding its damage
under normal operating
conditions.
0 01000RIOLI E_00
RIOLINE
Characteristics
(Nominal values)
Type Length Spools / Box Total Tube Length / Net Weight Gross Weight
(m) Box (m) (kg) (kg)
C 350 350 4 1.400 9 10
C 750 750 2 1.500 8 9
Technical Characteristics
(Nominal values)
SAFETY WARNING
RIOLINE must not be used in flammable environments such as methane or coal dust. MAXAM strongly recommends not to use RIOLINE products with detonators and/or
initiation systems supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOLINE must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0 01000RIOLI E_00
RIODELAY
Detonating Cord Relays
www.maxam.net
RIODELAY
DETONATING CORD RELAYS
RIODELAY
Advantages
Safe, reliable and user friendly.
Colour coded for fast, easy
identification
Rigid plastic wedges ensure
secure placement of detonating
cord.
0 01000RIO EL _00
RIODELAY
Colour Table
Delay Colour
15 ms Red
25 ms Yellow
UN Number 0
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIODELAY. RIODELAY detonators must not be used in flammable
environments such as methane or coal dust. MAXAM strongly recommends not to use RIODELAY products with detonators and/or initiation systems supplied by other
manufacturers in the same blast and declines all liability in these cases.
RIODELAY detonators must be stored at moderate temperatures in a dry and well ventilated place.
DISCLAIMER AND LIMITATION OF LIABILITY
The information contained herein (the “Information”) is not exhaustive and subject to periodical review. The data contained herein may vary on account of the particular operating and maintenance conditions and
of external factors, such as humidity, temperature, or pressure. Maxam Europe, S.A. and/or its affiliates (“MAXAM”) do not warrant or make any representation regarding the accuracy or completeness of the
Information. MAXAM further reserves the right, in its sole discretion and without prior written notice, to modify the products described herein (the “Products”) and/or their specifications.
The use of the Products is an intrinsically dangerous activity and must, consequently, be restricted to qualified and trained users in possession of any necessary permits and licenses, and comply at all times with
appropriate safety and risk prevention measures and with the applicable law. The use, storage, or otherwise handling, of the Products may be subject to local regulations and restrictions, which must be examined
and observed by the user.
This document and any accompanying information (the “Documentation”) is not intended to constitute, and shall not be construed as, an offer or contractual commitment on MAXAM’s side. MAXAM expressly
disclaims any liability towards third parties with regard to the Documentation. For further information about the Products, please contact your distributor or sales representative directly. .
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0 01000RIO EL _00
RIODET
Electric Aluminium Detonator
www.maxam.net
R IALUMINIUM
ODET RIODET
8
manually in includes
100m water column pressure for 48 order to Delay Period,
hours, making the RIODET series achieve a Timing,
optimal for difficult conditions. quicker Length and
loading Lot Number.
operation. 4.0 s
Advantages
5.
Safe, reliable and user friendly. Colour coded
Accurate delay timing. wire for easy
Highly visible delay tags. identification
Water resistant. of delay
series.
#8 strength detonator ensures
reliable initiation of all cap-sensitive
explosives.
Resistant to high pressure.
0201000RIO E _ L02
RIODET
UN Number 00 0 02 0
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIODET. RIODET detonators must not be used in flammable environments such as methane or coal dust. MAXAM
strongly recommends not to use RIODET products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all liability in these cases.
RIODET detonators must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0201000RIO E _ L02
RIODET
Electric Copper Permissible Detonator
www.maxam.net
R IPERMISSIBLE
ODET RIODET
2
manually in includes
RIODET series optimal for difficult order to Delay Period,
conditions. achieve a Timing,
quicker Length and
loading Lot Number.
operation. 60 ms
Advantages
Safe, reliable and user friendly.
Permissible for underground coal
mining applications.
Accurate delay timing.
Highly visible delay tags.
Water resistant.
#8 strength detonator ensures
reliable initiation of all
cap-sensitive explosives.
High pressure resistance.
0201000RIO E _ ERM01
RIODET
Colour Code
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIODET. MAXAM strongly recommends not to use RIODET products with detonators and/or initiation systems
supplied by other manufacturers in the same blast and declines all liability in these cases.
RIODET detonators must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0201000RIO E _ ERM01
RIODET XP
Electric Extreme Pressure Seismic Detonator
www.maxam.net
REXTREME
I O PRESSURE
DET RIODET
polyethylene includes
0
coating Delay Period,
Length and
Lot Number.
ms
Advantages SISMICO
Features under 1 millisecond
response time.
Proven to have a superior seal
(SBR-PVC water seal)
Safe against static electricity,
electromagnetic inductions and
extraneous electric currents
Specifically designed for extreme
difficult conditions.
0201000RIO E _ X 00
RIODET XP
Firing Current
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIODET. RIODET detonators must not be used in flammable environments such as methane or coal dust. MAXAM
strongly recommends not to use RIODET products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all liability in these cases.
RIODET detonators must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0201000RIO E _ X 00
RIOTRONIC DT Electronic Blasting System
www.maxam.net
RIOTRONIC
ELECTRONIC SYSTEM
RIOTRONIC
RIOTRONIC DT contains a
field-proven two capacitor, two-way
communication system that
searches for missing, faulty or extra
1. 2.
detonators, and an exclusive smart #8 cap Online
shunt that permanently protects the strength programming
fuse head up to firing time, reaching detonator unit with two
even higher safety levels. attached to capacitor,
spooled firing two way
line. communication
RIOTRONIC DT is programmable in system.
1 ms increments up to 14000 ms.
Advantages 32 ft
Increased productivity
Improved fragmentation
Integrated
Optimised excavation and hauling delay module
More effective crushing and encased in a
pressure
milling resistant
Better dilution control resin.
Savings on consumables and parts
Advances in environmental
protection
0 01000RIO RO I _ 02
RIOTRONIC DT
Length Qty/ Gross Net NEM Communication Fully testable two-capacitor, two way
(m/ft) case Weight Weight (g/lb)
(kg/lb) (kg/lb) Dynamic Shock Resistance 15000 psi (1034 bars)
6/20 80 6,5/14,3 3,1/6,8 77/0,17 Water tightness 190 psi (13 bars) for 7 days
10/33 80 7,5/16,5 4,1/9,0 77/0,17 Operating Temperature -20°C to +45°C / -4°F to 113°F
15/49 72 8/17,6 4,6/10,1 72/0,16 Storage Temperature -40°C to +70°C / -40°F to 158°F
20/65 72 9,5/20,9 6,1/13,4 72/0,16 Detonator Strength #8 cap strength
25/82 72 11/24.3 7,6/16,7 72/0,16 Tensile Strength > 320 N (70 lb)
30/98 64 11/24.3 7,6/16,7 64/0,14 Shelf Life 2 years when stored properly
35/115 56 11/24.3 7,6/16,7 54/0,12 Timing Fully programmable
40/131 56 12/26,5 8,6/18,9 54/0,12 ESD Resistance Compliant to EN 13763-13 (25 KV)
60/197 16 7/15,4 4,18/9,2 18/0,04 RF Resistance Compliant to EN 13763-27
80/262 16 8,5/18,7 5,68/12,5 18/0,04 Traceability Unique ID number
Environment Lead-free ignition module
Wire HDPE Orange/Orange - strength 30 kg
Performance
Class
Contact your local MAXAM
1
representative for further information.
UN Number 0
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0 01000RIO RO I _ 02
RIOCAP
Plain Detonators
www.maxam.net
RIOCAPPlain Detonators
1. 2.
Plastic case Compact
provides packaging and
excellent easy to use.
impact and
humidity
protection.
Advantages
Plastic case provides excellent
impact and humidity protection.
0701000RIO _00
RIOCAP
Net Weight Gross Weight Units / Case Cases / Interior Boxes Total Units / Box
(Kg) (kg)
13 20 100 5 / 10 5000
Characteristics
Internal Diameter
(mm) 6,6
Strength 8
UN Number 002
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOCAP. RIOCAP detonators must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIOCAP products with detonators and/or initiation systems supplied by other manufacturers in the
same blast and declines all liability in these cases.
RIOCAP detonators must be stored at moderate temperatures in a dry and well ventilated place.
DISCLAIMER AND LIMITATION OF LIABILITY
The information contained herein (the “Information”) is not exhaustive and subject to periodical review. The data contained herein may vary on account of the particular operating and maintenance conditions and
of external factors, such as humidity, temperature, or pressure. Maxam Europe, S.A. and/or its affiliates (“MAXAM”) do not warrant or make any representation regarding the accuracy or completeness of the
Information. MAXAM further reserves the right, in its sole discretion and without prior written notice, to modify the products described herein (the “Products”) and/or their specifications.
The use of the Products is an intrinsically dangerous activity and must, consequently, be restricted to qualified and trained users in possession of any necessary permits and licenses, and comply at all times with
appropriate safety and risk prevention measures and with the applicable law. The use, storage, or otherwise handling, of the Products may be subject to local regulations and restrictions, which must be examined
and observed by the user.
This document and any accompanying information (the “Documentation”) is not intended to constitute, and shall not be construed as, an offer or contractual commitment on MAXAM’s side. MAXAM expressly
disclaims any liability towards third parties with regard to the Documentation. For further information about the Products, please contact your distributor or sales representative directly. .
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0701000RIO _00
RIOCORD Detonating Cord
www.maxam.net
RIOCORDDETONATING CORD
RIOCORD
The entire RIOCORD range is oil and water resistant and flexible. RIOCORD
must be initiated with a #8 strengh detonator or another line of RIOCORD.
Recommended connection is explained on the instruction sheet and should
always be followed.
Advantages
Safe, reliable and user friendly. It is essential that the detonating cord be checked to ensure that it is dry at
the initiation location.
Excellent resistance to oil and
water penetration.
Colour coded for fast, easy
identification.
Good flexibility and secure knot
holding.
0 01000RIO OR _01
RIOCORD
PV 6 6 Fuchsia 3,6 60 2x400 or 4x200 10,6/10,6 12,0/12,2 Trunk line for non electric systems.
PV 10 10 Red 4,0 75 2x250 or 4x125 10,0/10,0 11,4/11,6 Throughout the borehole to initiate
non electric system. Trunk line cable
PV 12 12 Blue 4,4 75 2x250 or 4x125 11,0/11,0 12,4/12,6 Throughout the borehole to initiate
non electric system. Trunk line cable
PV 20 20 White 5,7 100 2x200 or 4x100 13,6/13,6 15,0/15,2 Throughout the borehole to initiate
non electric system. Trunk line cable
PV 40 40 Green 7,8 100 2x100 12,6 14,0 Throughout the borehole to initiate
non electric system. Trunk line cable
PV 80 80 Yellow 10,3 70 2x50 12,5 14,0 Contour blasting
PV 100 100 Red 11,2 70 2x50 12,6 14,0 Contour blasting
Class 11
UN Number 00
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOCORD. With the exception of permissible RIOCORD, RIOCORD must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIOCORD products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all liability in
these cases.
RIOCORD must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
MAXAM Europe, S.A.
Avda. del Partenón, 16
Campo de las Naciones
28042 Madrid, SPAIN
Tel: +34 91 722 01 00
Fax: +34 91 722 01 01
0 01000RIO OR _01
RIOBOOSTER Cast Booster
www.maxam.net
RIOBOOSTER
CAST BOOSTER
RIOBOOSTER
RIOBOOSTERS are also less likely to be lifted up the side of the hose
during bulk loading operations.
RIOBOOSTERS have been designed for simple handling. Their oil and
Advantages water resistance, supplemented by a slow aging curve, gives it
characteristics that make it suitable for use in extreme working
Safe and reliable and user friendly. conditions.
Cast design protects detonator.
Variable size to suit application. The shelf life of cast RIOBOOSTERS is dependent upon the product
Accepts all MAXAM initiation being stored in moderate temperatures in dry, well ventilated magazines
systems. for Class 1.1D explosives.
High detonation pressure output.
Oil and water resistant.
0 01000RIO OO ER_01
RIOBOOSTER
800 7500 >20GPa 1.60 74 128 32 26,0 27,0 RIOCORD 10 and 12 g/m #8 strength detonator
450 7500 >20GPa 1.60 58 114 56 25,0 26,0 RIOCORD 10 and 12 g/m #8 strength detonator
400 7500 >20GPa 1.60 58 110 56 22,4 23,5 RIOCORD 10 and 12 g/m #8 strength detonator
150 7500 >20GPa 1.60 36 108 152 22,8 23,8 #8 strength detonator
Class 11
Contact your local MAXAM
representative for further information.
UN Number 00 2
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOBOOSTER. RIOBOOSTER must not be used in flammable environments
such as methane or coal dust. MAXAM strongly recommends not to use RIOBOOSTER products with detonators and/or initiation systems supplied by other manufacturers in
the same blast and declines all liability in these cases.
RIOBOOSTER must be stored at moderate temperatures in a dry and well ventilated place.
DISCLAIMER AND LIMITATION OF LIABILITY
The information contained herein (the “Information”) is not exhaustive and subject to periodical review. The data contained herein may vary on account of the particular operating and maintenance conditions and
of external factors, such as humidity, temperature, or pressure. MAXAMCorp Holding S.L. and/or its affiliates (“MAXAM”) do not warrant or make any representation regarding the accuracy or completeness of the
Information. MAXAM further reserves the right, in its sole discretion and without prior written notice, to modify the products described herein (the “Products”) and/or their specifications.
The use of the Products is an intrinsically dangerous activity and must, consequently, be restricted to qualified and trained users in possession of any necessary permits and licenses, and comply at all times with
appropriate safety and risk prevention measures and with the applicable law. The use, storage, or otherwise handling, of the Products may be subject to local regulations and restrictions, which must be examined
and observed by the user.
This document and any accompanying information (the “Documentation”) is not intended to constitute, and shall not be construed as, an offer or contractual commitment on MAXAM’s side. MAXAM expressly
disclaims any liability towards third parties with regard to the Documentation. For further information about the Products, please contact your distributor or sales representative directly.
Distributor:
0 01000RIO OO ER_01
Index >>
ACCESORIES
Blasting Machine
When the capacitor discharges the delivered energy immediately reaches its
maximum value and thereby ensure a fast and reliable ignition of all detonators.
Depending on the operation area two different types of blasting machines are
available:
The duration of the current impulse for permissible blasting machines are reduced
to a maximum of 4 milliseconds.
(REV: 20/05/11)
Permissible Capacitor-Exploders Blasting
Machine
Technical Data
The exploder testing devices types ZEB/P... are for testing of the
electrical capacity of capacitor exploders. Please take the respective
! type from the table.
"#
ZEB
Zünderwerke Ernst Brün GmbH
Werkstrasse 111
45271 Haltern am See
Tel.: +49 2364 689 257
Fax +49 2364 689 297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com
(REV: 20/05/11)
Capacitor-Exploder ZEB / CA10 / U1
Military Blasting
Machine
ZEB/CA10/U1
The generator of ZEB / CA10/U1 produces energy. After a repeated pulling of the feed
rope the internal capacitor has accumulated the necessary energy and will deliver it
automatically via terminals to the connected ignition circuit.
When the capacitor discharges the energy immediately reaches its maximum value and
thereby ensures a fast and reliable ignition of all detonators.
The knob for the operation of the generator is mounted on the right narrow sides.
This capacitor blasting machine with a feed rope/pull drive ensures a uniform ignition
impulse independent of the strenuous effort and skill of the operator.
Its solid construction, its reduced weight and size and the fact that the device do not need
any source of energy get that this device was the perfect blasting initiator for military
forces.
(REV: 11/04/11)
Capacitor Exploder ZEB/ CA 10/ U1 Military
Blasting Machine
Technical Data
Detonator
ZEB
Zünderwerke Ernst Brün GmbH
Werkstrasse 111
45271 Haltern am See
Tel.: +49 2364 689 257
Fax +49 2364 689 297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com (REV: 11/04/11)
ZEBRA Capacitor-Exploders
Keep on running …
with ZEB-Exploders!
(REV: 11/04/11)
ZEBRA Capacitor-Exploders Keep on running …
with ZEB-Exploders!
Technical Data
Detonators
LEGAL W?JJQJXX&Y[\]?
The information contained herein can vary according to the different conditions of storage and use of the products as well as external factors like temperature, humidity and pressure, among
others. This product is potentially dangerous; and, therefore, its use and handling must be restricted to the personnel duly qualified and be submitted to applicable laws.
The documentation described herein shall not be considered as contractual commitment and its disclosing shall not be able to be treated as a contractual offer. By virtue of this document the
Company does not assume any liability nor warranty before third parties.
ZEB
Zünderwerke Ernst Brün GmbH
Werkstrasse 111
4527"= &
Tel.: +49 2364 689 257
Fax +49 2364 689 297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com (REV: 11/04/11
Non-Permissible Capacitor-Exploders
Blasting Machine
When the capacitor discharges the delivered energy immediately reaches its maximum value
and thereby ensure a fast and reliable ignition of all detonators.
The capacity of a blasting machine is defined in maximum resistances (ohm) of the ignition
circuit. It is important that the ignition circuit resistance will not exceed the allowed maximum
resistance of the blasting machine.
Depending on the operation area two different types of blasting machines are available:
The duration of the current impulse for permissible blasting machines are reduced to a
maximum of 4 milliseconds.
(REV: 15/04/11)
Blasting
Non-Permissible Capacitor-Exploders Machine
Technical Data
Capacity of capacitor 8 μF 16 μF 30 μF 30 μF
Dimensions (approx.) 124 x 77 x 150 100 x 125 x 155 mm 100 x 125 x 155 mm 120 x 77 x 155 mm
Maximum resistance of the circuit A 160Ω , U 55Ω A 260Ω, U 125 Ω A 810 Ω, U 370 Ω, VA 60 Ω A 510 Ω , U 195 Ω,
Corresponding testing device (Type) ZEB/P/CA 30 ZEB/P/D/CA 50 ZEB/P/D/CA 160 ZEB/P/N/CA 100T
ZEB/P/CU 10 ZEB/P/D/CU 30 ZEB/P/D/CU 100 ZEB/P/N/CU 50T
Type ZEB/N/CA 160 T ZEB/CU 200/ HU 20 ZEB/CU 400/HU 80 ZEB/CU 400/ HU 160
ZEB/N/CU 100 T ZEB/CA 300
BAM-Permission* - ZM-450 ZM-451 ZM-452
Dimensions (approx.) 120 x 77 x 155 mm 175x 225 x 245 mm 330 x 165 x 280 mm 330 x 165 x 280 mm
Maximum resistance of the circuit A 810 Ω, U 370 Ω, VA 60 Ω A 1510 Ω, U 720 Ω, HU15Ω U 720 Ω, HU 15 Ω, VA 240 Ω/ U 720Ω, HU 35 Ω, VA 240 Ω /
U 1420 Ω, HU 50 Ω, VA 450 Ω U 1420 Ω, HU 100 Ω, VA 450 Ω
Electric detonators with steel wires of 160 A, 100 U 300 A, 200 U 200 U / 400 U 200 U / 400 U
3.5 m length in series connection
Electric detonators with Cu wires of 320 A, 300 U, 15 VA 600 A, 400 U, 20 HU 600 U, 20 HU, 60 VA 600 U, 50 HU, 60 VA /
3.5 m length in series connection 1200 U, 80 HU, 120 VA 1200 U, 160 HU, 120 VA
Corresponding testing device (Type) Function control buit-in ZEB/P/CU 200 ZEB/P/CU 400 ZEB/P/CU 400
ZEB/P/HU 20 ZEB/P/HU 80 ZEB/P/HU 160
ZEB/P/CA 300
* Valid for detonator type ”U“ or ”HU
The exploder testing devices types ZEB/P... are for testing of the
electrical capacity of capacitor exploders. Please take the
! respective type from the table.
"#
== ^ ! =
>><<
%&' %
"<&
LEGAL W?JJQJXX&Y[\]?
The information contained herein can vary according to the different conditions of storage and use of the products as well as external factors like temperature, humidity and pressure, among
others. This product is potentially dangerous; and, therefore, its use and handling must be restricted to the personnel duly qualified and be submitted to applicable laws.
The documentation described herein shall not be considered as contractual commitment and its disclosing shall not be able to be treated as a contractual offer. By virtue of this document the
Company does not assume any liability nor warranty before third parties.
ZEB
Zünderwerke Ernst Brün GmbH
Werkstraße 111
4572"= & Q
Phone +49 2364 689-257
Fax +49 2364 689-297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com (REV: 15/04/11)
Exploder ZEB / NI1
Blasting machine
Description
The blasting machine ZEB / NI1 is a lightweight portable device that allows
the use of Shock Tube techniques - instead of usual electrically initiated
detonators. The device is a specially designed blasting machine for initiation
of Shock tubes. The blasting machine ZEB / NI1 allows a safe and reliable
ignition.
In order to activate the ignition system it is sufficient to open the cover of the
leather case and connect the connector pin of the electrode with the tube.
With the security key in the charging lock the ignition can be prepared by
rotated the key around 45° until the LED in the push button lights up. In this
moment the blasting machine is ready to ignite. The Shock Tube can be
initiated by pressing the push button.
If the ignition should be prevented or stopped the key just must be removed
from the charging lock.
The device is supplied in a leather case for a better transport and protection.
(REV: 13/04/11)
Exploder ZEB / NI1 Blasting machine
Ignition,
push-button with
integrated LED
Specification
LEGAL WARNING
The information contained herein can vary according to the different conditions of storage and use of the products as well as external factors like temperature, humidity and pressure, among
others. This product is potentially dangerous; and, therefore, its use and handling must be restricted to the personnel duly qualified and be submitted to applicable laws.
The documentation described herein shall not be considered as contractual commitment and its disclosing shall not be able to be treated as a contractual offer. By virtue of this document the
Company does not assume any liability nor warranty before third parties.
ZEB
Zünderwerke Ernst Brün GmbH
Werkstrasse 111
45271 Haltern am See
Tel.: +49 2364 689 257
Fax +49 2364 689 297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com (REV: 13/04/11)
Zündkreisprüfer ZEB/DZ3
Ohmmeter mit
Digitalanzeige
Gerätebeschreibung
Der Zündkreisprüfer ZEB/DZ3 ist ein tragbares Gerät zum Messen elektrischer
Widerstände einzelner Brückenzünder und fertig verlegter Zündkreise. Mit
geöffnetem Taschendeckel kann das Gerät sowohl an den Zündkreis
angeschlossen als auch gut abgelesen werden.
Der Messbereich liegt zwischen 0 - 1.999,9 mit einer Auflösung von 0,1 .
Das Einschalten erfolgt automatisch durch Anlegen des Zündkreises an die
Anschlussklemmen. Die Messergebnisse erscheinen auf einer 4 ½ stelligen
LCD-Anzeige. Das Gehäuse ist staub- und wassergeschützt und befindet sich
in einer Ledertasche mit Tragriemen.
In schlagwettergefährdeten Betrieben darf das Gerät nur in der Ledertasche
verwendet werden.
(REV: 11/04/11
Zündkreisprüfer ZEB/DZ3 Ohmmeter mit
Digitalanzeige
Technische Daten
Die hier enthaltene Dokumentation ist nicht als vertragliche Verpflichtung anzusehen und die Bekanntgabe stellt kein Vertragsangebot dar. Kraft dieses Dokuments übernimmt die Gesellschaft
keinerlei Verantwortung oder Garantie gegenüber Dritten.
ZEB
Zünderwerke Ernst Brün GmbH
Werkstrasse 111
45271 Haltern am See
Tel.: +49 2364 689 257
Fax +49 2364 689 297
zeb@zeb.maxam-corp.com
(REV: 11/04/11
www.zeb-maxam.com
Circuit Tester ZEB/DZ3
Ohmmeter with
Digital Indication
Device Description
(REV: 20/05/11
Ohmmeter with
Circuit Tester ZEB/DZ3 Digital Indication
Technical Data
Temperature range - 20 up to + 50 °C
Dimensions 130 x 95 x 40 mm
ZEB
Zünderwerke Ernst Brün GmbH
Werkstraße 111
45721 Haltern am See, Germany
Phone +49 2364 689-257
Fax +49 2364 689-297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com (REV: 20/05/11
Insulation and Ignition Circuit Tester
Device Description
The insulation and ignition circuit tester ZEB/DIZ is a portable combined device and contains
both an ohmmeter for measuring ignition circuit resistance and an insulation tester for
measuring the insulation resistance of ignition circuits against earth (shunt resistance) with
increased measuring voltage.
The housing is dust and water protected and placed in a leather case with carrying strap.
(REV: 20/05/11)
Circuit Tester ZEB/DIZ Insulation Testers and
Technical Data
ZEB
Zünderwerke Ernst Brün GmbH
Werkstraße 111
45721 Haltern am See, Germany
Phone +49 2364 689-257
Fax +49 2364 689-297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com (REV: 20/05/11)
VibraZEB VM–7D+
The data transfer to an external USB Disk allow an easy way to get the records
without the necessity of a computer. Data can be downloaded and setup commands
can be uploaded directly or remotely by modem. Recorded vibrations can be
documented directly at the measuring point by a measuring record or far away from
a computer. Maximal values of vibration velocity as well as frequencies will be
printed out with date and time during every vibration event. The graphical
presentation of the vibration data as well as a clear recording of the measuring
data is possible by the delivered software (WIN XP).
(REV: 15/07/11)
Digital Instrument for measuring
VibraZEB VM-7D+ Digital Instrument
and recording vibrations
and recording
for measuring
vibrations
Tested (Measuring) Reliability
The reliability check of the geophones to the transducer is recorded by an automatic inspection before each measurement. In
connection with a regular one yearly calibration you will obtain the prerequisites for indisputable measurement results which will
withstand every test.
Technical Data
Security for the Future
Up to date digital signal processing guarantee update ability and high
reliability. A valuable investment for the price!
Calibration
Calibration is effected by means of calibration table controlled by a
laser-interferometer. The calibration certificate is valid for 1 year.
Facts
• Friendly and easy functionality with menu controls
• Designed to work under rough conditions
• Pre- adjustable recording parameter
• Sensor probe self-test
• Remote access (WEB and FTP servers)
• Recording data in your mobile phone or e-mail (no special software required)
• Record print out during a measurement as well as for later documentation
• Main supply and battery operated (approx. 20 hours)
• Measuring data evaluation and recording with convenient and easy to use
Windows software on PC
• Reports: Record, Analysis FFT
• Regressions analysis (charge/distance table)
• Channel for sound microphone
Accessories
• Operating instruction manual
• USB-Stick with PC-Software
• Optional: Special performances
• Optional: Printer
• Optional: GSM/GPRS Modem
• Optional: Carrying bag
• Optional: Microphone for sound pressure
(REV: 15/07/11)
Digital Instrument for measuring
VibraZEB VM-7D+ and recording vibrations
Technical Data
Main device
Storage
Measured variable: velocity of vibration v(t) temperature:
Number of channels: 3 (X, Y, Z) + 1 microphone
(option: 6 channels + 1 microphone)
Measuring range: +/- 120 mm/s
Sampling interval: 2048 Samples/s Analog to Digital
Converter: 16 bits
Data storage memory: 200 MByte¹
Frequency range: 1 - 315 Hz
Recording time: 1, 2, 4, 8, 16, 32 s
Trigger Mode: Automatic²
Manual
External
Data transfer: Ethernet
USB Disk
Remote GSM/GPRS
External power supply: 12 V
Internal power supply: Li-ion rechargeable battery
Autonomy: 20 Stunden2
Visualization: 128 x 64 Pixel
Graphic LCD + 4 LEDs
Protection: IP 54
Dimensions: 180 x 220 x 70 (mm)
Weight: 1,9 kg
Operating temperature: 10 °C to +50 °C
Storage temperature: 20 °C to +60 °C
Operating and storage
humidity: without condensation
Note 1: For 1 second and 4 channel records the memory can store up to 6000 records. The amount of memory could
be incremented upon request.
Note 2: In automatic trigger mode each channel could be independently configured and activated.
Microphone
Measuring Range: 2-502 Pa (100-148 dB)
Resolution: 0.1 Pa
MODEM Options
The optional modem options offer the following benefits to the equipment:
• Send SMS text messages with the data results of the record to the desired
mobile phone (only with modem option).
• Remote control of the configuration parameters of the equipment with a
WEB -based application (no special software required).
• Access to the data from your mobile phone or computer.
• Receive an e-mail to your account with the data of the record.
• FTP server for a fast and easy data transfer.
• Synchronization with an external time server (NTP protocol). This option
allows the system clock of the equipment to stay accurate, with a maximum
error of milliseconds.
• Note: external power necessary
(REV: 15/07/11)
Digital Instrument for measuring
VibraZEB VM-7D+ and recording vibrations
WEB-Server Configuration
Eingebauter AKKU:
The information contained herein can vary according to the different conditions of storage and use of the products as well as external factors like temperature, humidity and pressure, among
others. This product is potentially dangerous; and, therefore, its use and handling must be restricted to the personnel duly qualified and be submitted to applicable laws.
The documentation described herein shall not be considered as contractual commitment and its disclosing shall not be able to be treated as a contractual offer. By virtue of this document the
Company does not assume any liability nor warranty before third parties.
ZEB
Zünderwerke Ernst Brün GmbH
Werkstrasse 111
45721 Haltern am See, Germany
Tel.: +49 (0) 2364 689 257
Fax +49 (0) 2364 689 297
zeb@zeb.maxam-corp.com
www.zeb-maxam.com (REV: 15/07/11)