(t-4
5, ALLOWABLE CAPACITY OF STANDARD CONNECTION
COLUMN BASE CONNECTION, CBt
HLSHAPE STEEL COLUMN
Calculation of Allowable Axial Force
4) Aval Capacity due to Concrete Bearing Pressure, Pt Ase J9
35xto x /AZXAT
Pi
AISC 18 p 5-78
hero: At = area of base plate = A xB
‘A2 = area of pedestal= at x1
21, bt = minimum pedestal sizo
2) Aval Cepscty dus to Base Plate Bonding, P2
8) Asal Capacity cue fo Base Plate Bending ( Slab Type), P2a AISC p 3-108
Lx (d+ bf-2L)
L)
For Type-t: Atb
For Type-2: Atb = 2L x( d+ 20t-
Ie L=tb/(3xFp/Fb)405 ; Fpeossxte
Fb=075xFy
P2a=Fpx Atb
wre
‘where : bf = flange width of column
= depth of column
TWeE2
») Axial Capacity ue to Base Plate Bending Cantilever Type ), P2 AISC p 2-106-3-107
fea Xe lager of (n,n.n)
agg
st h— Me fpx Xe2 2
where: fp = P2b/(AxB)
n=(axbe) A056 /4
M=P2bxXet/(2xAx8)
Mizop <= Fb = 075Fy
Zop=tb*/6 1 Zbp= section modutus of ase plate
th base plate thickness
therefore,
P2b = tb
‘3xXet(51) 2
COLUMN BASE CONNECTION, CBt
3) Tensie Capacty , Tt
AxZopxFb/G
Zop = wtb 18 ;
a un sum (20-0, exgramr-crorny
: sie | wastage
SHR | of SB: | MTRN LEE, re nrseceens2 caywmmari,
He |
w= W1 (For without Rib Pate)
MIN-(WV1,WW2) (For 2-bots or with ib Plate)
where: Zop = section modulus of base plate
Fo=075Fy
«dh = bok hole clameter
1 = column flange thickness,
1 ip plate thickness
4) Shear Capacity of Bo, Vt
Vie nx Fy
nee: on
Fvb = Single sheer capacity of anchor bolt
Fv x dot /4
44> = bot ole diameter
Mote)
In case that combined tension and shear on anchor bolt cannot be ignored, the safety of anchor bolt
‘shall De verified as AISG specifications as below
Fla = 179Nimm? -188 FE AISC TABLE 33
where: Fla = Allowable tension capacity of anchor bolt for combined shear force, Nirmi2
{V= Actual shear stress of anchor bot , Nimm2
lovable tension capacity of anchor bot, Ninn