Professional Documents
Culture Documents
Beginning
The aim of this task is to assemble and fit out the interior cubicle of a switchgear.
Materials needed:
GA Drawing
Label Board
Tools needed:
Label Drill Bits
PPE needed:
Safety Shoes
Preparing
Make sure that Good and Safe Working Procedures are followed throughout the
assessment. The correct PPE was worn, and correct procedures were taken when in
the workshop. Safety shoes always worn throughout workshop, and barrier cream
applied before interacting with anything.
Clean workspace and lay out equipment needed, check for any damage before
continuing.
Make sure that necessary and correct drawings are available to hand to aid with label
making.
During
1. Sign in
2. Start vacuum and machine
Checking Tool
2. Set XYZ
a. Set to fast to bring toward you
End
I made sure once finished, that the piece of work is done to R&B standards
Clean work area, make sure workspace is clean and tidy
Inspect tools and equipment and put them away
Fill out the necessary paperwork