wire brush wherever required. 2. Clean the surface for any traces of oil and 9rease wi.th white spirit.
3. Apply the part with Red 0xide Zinc Chromat: Primer
to IS:2074-1979 so as to get Dry Film Thickness (DFT) of 12 to 15 microns. 4 Allow it to dry. 5. Clean the machined surface / threads for any traces of oil and dirt with whité spirit. 6. Cover the machined surface | threads wi.th rust preventive agent as per Clause 19.3 (g) of IS:6049-197 1,