You are on page 1of 1

Sound Data

C3500 D5e 50Hz


EPA Tier 2 Emissions

Sound Pressure Level @ 7 meters, dB(A)


See Notes 1-6 listed below
Measurement Location Number
(Note 1) 8 Position
Configuration Exhaust
Average
1 2 3 4 5 6 7 8

Unhoused - Remote Cooled Infinite 91.8 96.5 94.2 95.1 92.2 96.3 96.7 95.8 95.1

Unhoused – High Ambient Cooling System Infinite 92.4 97.4 97.6 96.9 96.4 98.1 97.4 99.7 97.4

Unhoused – Enhanced High Ambient


Cooling System
Infinite 92.4 97.4 97.6 96.9 96.4 98.1 97.4 99.7 97.4

Sound Power Level, dB(A)


See Notes 2-4, 7 and 8 listed below
Overall
Configuration Exhaust Octave Band Center Frequency (Hz) Sound
Power
31.5 63 125 250 500 1000 2000 4000 8000 16000 Level

Unhoused - Remote
Cooled
Infinite 67.9 87.1 103.8 108.0 114.1 117.0 118.1 115.8 120.7 98.8 124.8
Unhoused – High
Ambient Cooling Infinite 72.7 89.2 114.0 118.1 119.7 120.2 119.2 115.3 117.1 96.2 126.6
System
Unhoused – Enhanced
High Ambient Cooling Infinite 72.7 89.2 114.0 118.1 119.7 120.2 119.2 115.3 117.1 96.2 126.6
System

Exhaust Sound Power Level, dB(A)


See Note 2 and 9 listed below
Octave Band Center Frequency (Hz)
Overall Sound
Open Exhaust Power Level
31.5 63 125 250 500 1000 2000 4000 8000 16000
(No Muffler at Rated
Load)
68.2 96.9 100.9 120.5 117.3 118.2 119.8 118.8 113.6 99.4 126.3

Note:
1. Position 1 faces the Generator front per ISO 8528-10. The positions proceed around the generator set in a counter-clockwise
direction in 45° increments. All positions are at 7m (23 ft) from the surface of the generator set and 1.2m (48in) from floor level.
2. Sound levels are subject to instrumentation, measurement, installation and manufacturing variability.
3. Data based on full rated load. Sound data with remote-cooled generator sets are based on rated loads without cooling fan noise
4. Sound data for generator set with infinite exhaust do not include exhaust noise.
5. Sound Pressure Levels are measured per ANSI S1.13 and ANSI S12.18, as applicable.
6. Reference sound pressure is 20 µPa.
7. Sound Power Levels per ISO 3744 and ISO 8528-10, as applicable.
8. Reference power = 1 pw (10-12W)
9. Exhaust Sound Power Levels are per ISO 6798, as applicable.

Cummins Power Generation Data and Specification Subject to Change Without Notice Bulletin msp-1202c

You might also like