Professional Documents
Culture Documents
1. The following are the operation performed in the workshop except (a) construction (b) repair (c)
maintenance (d) surgery.
2. Wood can be classified into_______and_____ (a) hard and wet wood ( b) soft and wet (c) Hard and
softwood (d) Cheap and expensive wood
3. _____are called deciduous wood (a)Softwood (b) Wet wood (c) Hard wood (d) Cheap wood
4. _______wood is heavy in weight (a) Hardwood (b) Softwood (c) Fast wood (d) Cheap wood
5. ________are iron buckets painted red and loaded with sand for putting out small fire (a)Sand bucket
(b) Chemical buckets (c) Alarm bucket (d) Blanket bucket.
6. ________can be defined as a technical language used for describing things with the aid of drawing.
(a) Technical drawing (b) Drawing materials (c) drawing instrument (d)Drawing board
7._______is obtained when two or more different metals are mixed together.
8._______is used for determining angle at various degrees, (a) Protector (b) steel (c) Steel lapel (d)
Caliper.
9. _______is when ceramics easily break. (a) Heal resistant (b) Brittleness (c) Break resistance (d)
Inorganic material.
10. Hacksaw is used to cut___________ (a) wood (b) Concrete (c) Metal (d) Plastic.
11.This is used for planning rough wood. (a)Rip Saw (b)Jack plane (c) Force plane (d) Tee Square.
12.Who is a Pedestrian? (a) A Driver (b)Cyclist (c) Athlete (d) Somebody walking along the road or street.
13.In order to prevent an accident, a motorist must use the following except (a) driving mirror (b) Cell
phone (c) Seat belt (d) Obey speed limit.
14. The table on which wood worker perform their operation is called (a) workbench (b) Bench box (c)
workshop table (d) Construction table
15. The following are products of technology except (a) stone (b) microwave (c) aircraft (d) computer.
16. The following are modern technology except (a)cars (b)mobile phone (c)tractor (d) hoes.
17. The following are the importance of technology except.......(a). It encourages creativity in students.
(b). It provides students with a solid foundation for future training in pre-vocational subjects. (c). It
prepares students with basic technological literacy. (d). It encourages waste of resources.
18.______is a place where activities such as fabrication, designing, construction and drawing take place,
19._____means protection from, or not being exposed to, the risk of harm or injury.
20.______is a negative experience that happens to somebody when he does not expect it.
(a) An accident (b) Disease (c) Fire outbreak (d) Electrical sparking.
21. The following are causes of accidents except.
(a) using appropriate safety devices (b) Lack of concentration (c). horseplay (d) Lack of carefulness in
handling machines.
(a) Extinguishers and bucket of sand (b) Helmets (c) Boots (d) Goggles.
23. ______is a place where activities such as fabrication, designing, construction and drawing take place.
24. _____means protection from, or not being exposed to the risk of harm or injury.
25. ______is a negative experience that happens to somebody when he does not expect it.
(a) An accident (b) Disease (c) Fire outbreak (d) Electrical sparking.
(a) using appropriate safety devices (b) Lack of concentration (c) horseplay (d) Lack of carefulness in
handling machines.
(a) Extinguishers and bucket of sand (b) Helmets (c) Boots (d) Goggles.
30._____are trees that shed their leaves in the dry season to prevent water loss. e.g.Iroko, Afara,
Mahogany, Opepe, Omo.
(a) Hard wood trees (b) Soft wood trees (c) Di-cotyledonous trees (d) Coniferous trees.
(a) spruce and vine (b) cedar (c) cypress (d) Afara.
32. _______is a type of solid mineral substance that is usually hard and shiny and that heat and
electricity can travel through.
33. Some metals have the ability to be hammered or beaten into shape without cracking .This quality is
known as
(a) ferrous metals (b) non-ferrous metals (c) alloys, (d) terrazzo.
35. The group of metals that has no iron is not magnetic. Examples are as follow except
38. Glass is used to manufacture eye glasses and lenses because of this property. Choose from the
options.
(a) Brittleness (b) resistance to corrosion (c) transparent (d) resistance to heat.
(a) flower vase (b) tiles (c) wash basin (d) electric bulb.
Essay
1). a. Mention Five different types of building materials and explain their uses.