Professional Documents
Culture Documents
Design Options-II
Emerson Confidential
SS Control Valve Design Options
Trim Characterization
Gaskets
Packing options
Bonnet options
2
SS Control Valve Components
3
Valve characterstics
4
Cage characterization
5
Plug characterization
Plug Contour decides the flow characteristics
QO, Linear, EQ% Plugs are available
Angle
Double-Port Design
Push-Down-to-Open Valve
3-Way
8
Angle Design
Piping requirement
9
Double Port Design
Balanced design with double port
construction
Maximum valve rating of up to CL 600
Valve sizes from 3- 16 Inch
Suited for viscous fluids
Currently obsolete and replaced by E-
series valves.
Quote mainly for MRO/special
applications(HF acid service)
Model Name: A & AA Body
10
Push-Down-To-Open Valve
Easy maintenance
Bottom flange provides access to
trim without removal of actuator
Push down to Open construction
657-Provides Fail close action,667-
Provides Fail Open action
Available constructions are ETR &
EDR
Valve sizes up to 4 Inch
Valve rating up to CL600
11
3-Way Valves
12
3-Way Valves
Converging and Diverging applications 3-Way GX Valve
Available models :
YD
Balanced, Bottom port common
Valve size : ½” to 8 Inch
Rating : 150# to 600#
YS
Unbalanced, Side port common
Valve size : ½” to 6 Inch
Rating : 150# to 600#
3-way GX
Balanced (Bottom port common)
Unbalanced(Side port common)
Valve size: 1” to 4 Inch
Rating : 150# to 300#
13
3-Way Flow Directions
14
Trim Material Selection
Pressure drop
Fluid temperature
Potential for corrosion/erosion
Fluid lubricant properties
15
Gaskets
Cage gasket
Bonnet gasket
16
Construction & Visual Features of Gasket Types
17
Packing Options
Packing creates a tight seal between the packing bore and the valve stem to
prevent fluid leakage to atmosphere.
18
Spring Loaded PTFE Packing
Features :
1) Pressure assisted packing 4) V-shaped packing rings
2) Smooth stem requirement 5) Low friction& Good chemical compatibility
3) Constant loading with spring 6) Temperature limit of 232 deg C
19
Double PTFE Packing
20
Graphite Packing
Features :
High temperature services
High friction packing
Includes flexible die formed rings and braided filament rings
Graphite packing has consolidation issues
Sacrificial zinc washers for galvanic corrosion protection
21
Enviro-Seal PTFE Packing
Features
Low Leakage
Few packing rings for higher
stress on each ring
Live loading through Belleville
springs
Extrusion rings to retain shape
of PTFE rings
Complies to Emission Norms
22
Enviro-Seal Graphite Packing
23
Enviro-Seal Graphite Packing
Low emission at temperatures up to 600
deg F
Composite rings to transfer loading force.
PTFE washers for tight seal through
extrusion
Guide bushings to prevent lateral
movement
24
High-Seal Graphite Packing, Live Loaded
Features :
No PTFE washers
Used up to 1200 deg F
Does not comply with emission norms
Higher friction than Enviroseal
Visual indication of packing load
Adjustable loading to overcome consolidation issues
25
Bonnet Options
For protection of packing and yoke from extreme temperatures.
Creates a temperature gradient between valve body and the packing.
Different types of extension
Plain bonnet
Style 1 extension
Style 2 extension
Cryogenic extension
26
Enviroseal Bellows Bonnet
Features :
For extremely low leakage requirements (0 PPM service)
High corrosion resistance
Available with Hastelloy C or Inconel Bellows
Reliable and extended cycle life
Connections for purging and monitoring is available
27
Questions???