Professional Documents
Culture Documents
Tesda Circular 055 S. 2021
Tesda Circular 055 S. 2021
I. BACKGROUND/RATIONALE
II. OBJECTIVE
This guideline shall serve as basis for program re-registration application under
UTPRAS and delivery of TVET programs and services of the seventy-five (75)
existing Training Regulations with outdated tools, equipment and materials,
training facilities, and trainers' qualifications
New and existing training programs registered under the reviewed seventy-five
(75) Training Regulations (TRs) shall be covered by this Circular.
2. The ROPO/DO shall require the education and training providers with the
registered program under these TRs to report the enrolled, graduates and
employed in the T2MIS as part of the regular monitoring and feedback
system.
V. EFFECTIVITY
This Circular shall take effect as indicated and shall supersede all other
issuances inconsistent hereof. Wide dissemination of this Circular by all
concerned is hereby enjoined.
WHEREAS, Section 14 (b) of Republic Act No. 7796 mandates that TESDA
shall develop and establish a national system of skills standardization, testing, and
certification and conduct research and development on various occupational areas to
recommend policies, rules, and regulations for effective and efficient skills
standardization, testing and certification system in the country;
(TO), the OSO was instructed to review with the industry experts/practitioners, notably
the TRs promulgated in 2017 and backward and to prioritize which are for a full review.
WHEREAS, in the same meeting, it was agreed by the SSSDC that same list
of TRs for Review will be subject for consultation by TVls before the Resolution of the
TESDA Board;
t
TESDA-0P-QS0-01 -F08
Rev. No. 01 12/05/17
(1) Copies of this Resolution and the omnibus amendments of the existing Training
Regulations with outdated tools, equipment and materials be published in the
Official Gazette or in a newspaper of general circulation, and disseminated to
all concerned, and the same shall be effective fifteen (15) days upon
publication;
(2) The attached list of Training Regulations which has obsolete tools, equipment
and materials, training facilities and trainers' qualifications shall be deemed
amended and in view of the current advancement in the technology, the latest
tools, equipment and materials, training facilities and trainers' qualifications
shall be deemed considered by the operating units in the program registration,
and assessment and certification;
TESDA-0P-0 SO-01 -F08
Rev. No. 01 12105/17
(3) All programs registered under the current seventy-five identified qualifications
must comply with the requirements of the abovementioned Training
Regulations. The one-year period of re-registration under this Training
Regulations shall commence on the date of effectivity as indicated in the
Implementing Guidelines/TESDA Circular for the deployment of the amended
Training Regulations to be issued by the TESDA Secretariat; and
Attested by:
(Original Signed)
FR. ONOFRE G. INOCENCIO JR., SOB
Board Member, Education and Training
Sector
ANNEX A
I. LIST OF TRAINING REGULATIONS WITH REVIEWED TOOLS, EQUIPMENT AND MATERIALS, TRAINING
FACILITIES AND TRAINERS QUALIFICATIONS
SECTOR QUALIFICATION
1. Agricultural Crops Production NC I
2. Agroentrepreneurship NC II
3. Agroentrepreneurship NC III
4. Agroentrepreneurship NC IV
5. Animal Health Care and Management NC III
6. Animal Production (Poultry-Chicken) NC II
7. Animal Production (Swine) NC II
8. Artificial Insemination (Large Ruminants) NC II
Agricultural, Forestry and Fishery 9. Drying and Milling Plant Servicing NC III
10. Fishport/Wharf Operation NC I
11. Grains Production NC II
12. Horticulture NC III
13. Landscape Installation and Maintenance (Softscape) NC II
14. Pest Management (Vegetables) NC II
15. Rice Machinery Operations NC II
16, Seaweeds Production NC II
17. Sugarcane Production NC II
18. Heavy Equipment Servicing (Mechanical) NC II
19. HEO (Articulated Off-Highway Dump Truck) NC II
20. HEO (Backhoe Loader) NC II
21. HEO (Bulldozer) NC II
22. HEO (Concrete Pump) NC II
23. HEO (Container Stacker) NC II
24. HEO (Motor Grader) NC II
25. HEO (Paver) NC II
Construction 26. HEO (Rigid Off-Highway Dump Truck) NC II
27. HEO (Road Roller) NC II
28. HEO (Transit Mixer) NC II
29. HEO (Wheel Loader) NC II
30. Plumbing NC I
31. Plumbing NC II
32. Plumbing NC III
33. Rigging NC I
34. Screed NC I
35. Computer Systems Servicing NC II
Electrical and Electronics
36. Electronics Products Assembly and Servicing NC II
37. Hilot (Wellness Massage) NC II
Human Health/Health Care 38. Massage Therapy NC II
39. Pharmacy Services NC III
40. Emergency Medical Services NC II
41. Cable TV Installation NC II
42. Cable TV Operation and Maintenance NC III
Information and Communication
43. Telecom OSP and Subscriber Line Installation (Copper
Technology
Cable/POTS and DSL) NC II
44. Telecom OSP Installation (Fiber Optic Cable) NC II
45. Ship's Catering Services NC I
Maritime
46. Marine Electricity NC II
47. Flux Cored Arc Welding (FCAW) NC I
48. Flux Cored Arc Welding (FCAW) NC II
49. Flux Cored Arc Welding (FCAW) NC II l
50. Gas Metal Arc Welding (GMAW) NC I
51. Gas Metal Arc Welding (GMAW) NC II
52. Gas Metal Arc Welding (GMAW) NC III
Metals and Engineering
53. Gas Tungsten Arc Welding (GTAW) NC II
54. Gas Tungsten Arc Welding (GTAW) NC IV
55. Gas Welding NC I
56. Gas Welding NC II
57. Submerged Arc Welding (SAW) NC I
58. Submerged Arc Welding (SAW) NC II
59. Slaughtering Operations (Large Animal) NC II
Processed Food and Beverages
60. Slaughtering Operations (Swine) NC II
Social and Other Community 61. Domestic Work NC II
Development 62. Bookkeeping NC III
63. Attraction & Theme Parks Operation NC II
64. Barista NC II
65. Bartending NC II
66. Cookery NC II
67. Events Management Services NC III
Tourism 68. Food And Beverage Services NC II
69. Front Office Services NC II
70. Housekeeping NC II
71. Local Guiding Services NC II
72. Tourism Promotion Services NC II
73. Diesel Power Plant Maintenance NC Ill
Utilities 74. Diesel Power Plant Operation and Maintenance NC II
75. Diesel Power Plant Operation and Maintenance NC Ill
II. A - LIST OF TOOLS, EQUIPMENT AND MATERIALS
Agricultural, Forestry and Fishery (AFF)
Qualification Existing TEM Amended TEM
Agricultural Crops Tools Tools
Production NC I Description Qty Description Qty
bolos 25 pcs bolos 25 pcs
Broomstick 10 pcs Broomstick 10 pcs
Calculator 5 pcs Calculator 5 pcs
Container 5 pcs Container 5 pcs
Cutting tools 5 sets Cutting tools 5 sets
Digging tools 5 sets Digging tools 5 sets
Drying meter 2 pcs Drying meter 2 pcs
Dulos 10 pcs Dulos 10 pcs
Fruit crate 5 pcs Fruit crate 5 pcs
Harvesting tools 5 sets Harvesting tools 5 sets
Hat 25 pcs Hat 25 pcs
Knapsack sprayer 5 pcs Knapsack sprayer 5 pcs
Knife 5 sets Knife 5 sets
Light hoe 5 pcs Light hoe 5 pcs
Moisture meter 2 pcs Moisture meter 2 pcs
Petri-dish 2 pcs Petri-dish 2 pcs
pH meter 3 pcs pH meter 3 pcs
Pick mattock 5 pcs Pick mattock 5 pcs
Picking knife 5 pcs Picking knife 5 pcs
Plow 1 Plow 1 pc
Plumbing tools 2 sets Plumbing tools 2 sets
Post-Harvest treatment tools 5 sets Post-Harvest treatment tools 5 sets
Protective coat 25 pcs Protective coat 25 pcs
Protective gadgets 25 pcs Protective gadgets 25 pcs
Pruning sheers 5 pcs Pruning sheers 5 pcs
Rake 5 pcs Rake 5 pcs
Scissors 10 pcs Scissors 10 pcs
Seed bed 5 Seed bed 5 pcs
Seedling tray 5 Seedling tray 5 pcs
Shovel 10 Shovel 10 pcs
Sprinklers 15 Sprinklers 15 pcs
Step ladder 2 Step ladder 2 pcs
Storage tools/cabinet 2 Storage tools/cabinet 2 pcs
Transplanting tools 25 pcs Transplanting tools 25 pcs
Trowel 25 pcs Trowel 25 pcs
Equipment Equipment
Description Qty Description Qty
Booth/temporary shed 2 Booth/temporary shed 2 unit
Cart (Kariton & paragus) 5 Cart (Kariton & paragus) 5 units
Comb-tooth harrow 2 Harrow 2 units
Computer 1 Computer 1 unit
Crates 5 Crates 5 units
Drying oven 1 Drying oven 1 unit
Farm/ field 1
Greenhouse/nurser y 1
Harvesting equipment 1 Harvesting equipment 1 unit
Irrigation system (sprinkler, 1 Irrigation system (sprinkler, 1 unit
mist/drip irrigation mist/drip irrigation
Mower (grass cutter) 1 Mower (grass cutter) 1 unit
Overhead projector (OHP) 1 LCD/Smart TV 1 unit
Portable chain saw 1 Portable chain saw 1 unit
Post-Harvest treatment 1 Post-Harvest treatment 1 unit
equipment equipment
Power sprayer 1 Power sprayer 1 unit
Rotavator 1 Rotavator 1 unit
Service vehicle 1 Service vehicle 1 unit
Sorting equipment 1 Sorting equipment 1 unit
Spike tooth harrow 2 Harrow 2 units
Storage room 1 Storage room 1 unit
Surface irrigation system 1 Surface irrigation system 1 unit
Tractor/Carabao 1 Tractor 1 unit
Typewriter 1 Computer and printer 1 set
TRAINING MATERIALS TRAINING MATERIALS
Brochures 25 Brochures 25 pcs
Instructional supplies & materials 2 Instructional supplies & materials 2 pcs
Visual aids 2 Visual aids 2 pcs
Reference materials/Books 5 Reference materials/Books 5 pcs
(Kinds of Tropical Fruits) (Kinds of Tropical Fruits)
Data (Data on result of soil 5 Data (Data on result of soil 5 pcs
analysis) analysis)
Procedural manuals 5 Procedural manuals 5 pcs
Soil samples analysis 5 Soil samples analysis 5 pcs
Materials Materials
Description Qty Description Qty
Agri bags, plastic 250 pcs. Agri bags, plastic 250 pcs.
Bamboo stick 500 pcs. Bamboo stick 500 pcs.
Basket 5 pcs. Basket 5 pcs.
Catching nets 5 pcs. Catching nets 5 pcs.
Clips 3 dozen Clips 3 dozen
Coconut dust 5 sacks Coconut dust 5 sacks
Compost 5 sacks Compost 5 sacks
Fertilizers 1 sack Fertilizers 1 sack
First aide supplies/medi cine 1 kit First aide supplies/medi cine 1 kit
Flower inducer 5 bottles Flower inducer 5 bottles
Fungicides 5 bottles Fungicides 5 bottles
Gloves 25 pairs Gloves 25 pairs
Growing media (garden soil, 5 sacks Growing media (garden soil, 5 sacks
sewed sand, compost, soil, sewed sand, compost, soil,
manure and sawdust/rice manure and sawdust/rice
Killing bottles 5 pcs Killing bottles 5 pcs
Marking pens 5 pcs. Marking pens 5 pcs.
Masks 25 pcs. Masks 25 pcs.
Mulching material 5 sacks Mulching material 5 sacks
Hair nets 25 m Hair nets 25 m
Packaging materials, assorted Packaging materials, assorted
Pail 5 Pail 5 pcs
Paper/bond 5 rims Paper/bond 5 rims
Pencil 25 Pencil 25 pcs
Pens 25 Pens 25 pcs
Pesticides/Insect icides 5 bottles Pesticides/Insect icides 5 bottles
Pieces of cloth 5 pieces Pieces of cloth 5 pieces
Plastic bag 100 Plastic bag 100 pcs
Plumbing supplies 1 set Plumbing supplies 1 set
Pots 250 Pots 250 pcs
Propagating media (garden soil, 5 sacks Propagating media (garden soil, 5 sacks
sawdust, sand, composed, sawdust, sand, composed,
coconut coir) coconut coir)
Rice hull 3 sacks Rice hull 3 sacks
Rope, (small, med. Large) 3 rolls Rope, (small, med. Large) 3 rolls
Rubber band 3 boxes Rubber band 3 boxes
Rubber boots 25 pairs Rubber boots 25 pairs
Rubber knots Rubber knots
Sacks 25 sacks Sacks 25
sacks
II. B TRAINING FACILITIES (TF)
AGRICULTURE, FORESTRY AND FISHERY SECTOR
Qualification : AGRICULTURAL CROPS PRODUCTION NC I
Existing Amendment
Chick feeders 10 pc
Weighing scale (500 kg. cap.)
Syringes (5 to 20m1 cap.) Syringes (5 to 20m1 cap.) 1 pc
Hammer Hammer 1 pc
Shovel, wheel barrow Shovel 1 pc
wheel barrow 1 pc
Mineral boxes Mineral boxes 1 pc
Waterer Waterer 1 pc
Feeding trough Feeding trough 1 pc
Feed bin 1pc
Equipment Equipment
Description Qty Description Qty
Generator 1 Generator 1unit
Heater 1 Hover heater/Portable heater 3 unit
Weighing scale 1 Weighing scale (500 kg. cap.) 1 unit
Wheel barrow 1 Wheel barrow 1 unit
Feed cart 1 Feed cart 1 unit
Infrared gas brooder 1 Infrared lamps 1 unit
Fabricated layer cages 30 Fabricated layer cages 30 unit
Power Sprayer 1 Power Sprayer 1 unit
Egg sorter 2 unit
Debeaker 1 unit
Models/actual objects Models/actual objects
Breed/strain/ hybrid: 60 Breed/strain/ hybrid: 60 pc
Broiler strains: Broiler strains:
• Hydro G • Hydro G
• Pilch-de-kalb • Pilch-de-kalb
• Lohman • Lohman
• Starbro • Starbro
• Arbor acre • Arbor acre
• Avian Peterson • Avian Peterson
Strains of layers: Babcock 30 Strains of layers: Babcock 30 pc
• Dekalb • Dekalb
•H&N •H&N
• Hi-sex white • Hi-sex white
• Starcross • Starcross
• Lohman LSL • Lohman LSL
Egg layers classification (Based 30 Egg layers classification (Based 30 pc
on Phil. Product Standard, on Phil. Product Standard,
classification of chicken eggs) classification of chicken eggs)
• Jumbo >70 g • Jumbo >70 g
• XL 65-70 g • XL 65-70 g
• L 60-65 g • L 60-65 g
• M 55-60 g • M 55-60 g
• S 50-55 g • S 50-55 g
• Pullets 45-50 g • Pullets 45-50 g
• Peewee 40-45 g • Peewee 40-45 g
• no weight • no weight
Materials Materials
Description Qty Description Qty
Curtains 1 pc
Chick guard 30 pc
Models/actual objects: 60 pc
Breed/strain/ hybrid:
Broiler strains:
• Hydro G
• Pilch-de-kalb
• Lohman
• Starbro
• Arbor acre
• Avian Peterson
Prior to ac,reditation a training provide must have a Memorandum of Agreement with pi-43:e
poultry farm with a at least one poultry house as practice farrniwodkplace for the trainees.
ANIMAL PRODUCTION(SWINE) NC II
No Amendment
Based on a class sue of 25 students/trainees
Prior to eccredeation, a framing provide must neve a Memorandum of Agreement wrath private
seism farm Ads a at least INVO4OW WWI farm as praceoe fainVworkOsce for me Parse.
TOTAL
AREA IN GRAND TOTAL
SIZE IN AREA IN
SPACE REQUIREMENT SQ. AREA IN SQ. I
METERS Q.
METERS METERS
METERS
A. Building (permanent) 165
• Student/Trainee 2.00 a 1.00 per 2.00 per 50.00
Working Space student/trainee student 1
Hydraulic press (20 tons) 1 unit Hydraulic press (20 tons) 1 unit
Parts cleaner 1 unit Parts cleaner 1 unit
Pallet truck (5 tons) 1 unit Pallet truck (5 tons) 1 unit
Working bench with attached 5 Working bench with attached vises 5
vises units units
Bench grinder 1 unit Bench grinder 1 unit
Drill press 1 unit Drill press 1 unit
. Vertical hydraulic test bench 1 unit Vertical hydraulic test bench 1 unit
Injection pump calibration stand 1 unit Injection pump calibration stand with 1 unit
with nozzle injector tester nozzle injector tester
Engine dynamometer 1 unit Engine dynamometer 1 unit
Valve spring tester 1 unit Valve spring tester 1 unit
Engine stand 1 unit Engine stand 1 unit
Materials Materials
Description Qty. Description Qty.
Multi-purpose grease 10 Multi-purpose grease 10
kls. kls.
Engine oil (SAE 15W40) 50 Engine oil (SAE 15W40) 50
liters liters
Diesel fuel 200 Diesel fuel 200
liters liters
Penetrating oil (250 ml) 2 Penetrating oil (250 ml) 2
cans cans
Cotton rugs 20 Cotton rugs 20
kls. kls.
Cleaning solvent 5 Cleaning solvent 5
liters liters
Hydraulic / steering fluid (TELLUS 50 Hydraulic / steering fluid (TELLUS 50
68/10W) liters 68/10W) liters
Final drive/differential (gear oil 20 Final drive/differential (gear oil 20
GP90/140) liters GP90/140) liters
Transmission oil (ATF) 20 Transmission oil (ATF) 20
liters liters
Shop work cleaning tool(one each Shop work cleaning tool(one each
kind) 1 set kind) 1 set
Working clothes 25 Working clothes 25
pairs pairs
Safety shoes 25 Safety shoes 25
pairs pairs
Gloves 25 Gloves 25
pairs pairs
Goggles 25 Goggles 25
pairs pairs
Shop repair manual 5 pcs Shop repair manual 5 pcs
Hard hat 25 Hard hat 25
pcs pcs
II. B — TRAINING FACILITIES (TF)
CONSTRUCTION SECTOR
Qualification : Heavy Equipment Servicing (Mechanical) NC II
Existing Amendment
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
HEO Description Qty. Description Qty.
(Articulated Standard mechanical hand tools 2 sets Standard mechanical hand tools 2 sets
Off-Highway Grease gun 2 pcs. Grease gun 2 pcs.
Dump Truck) Mask 25 pcs. Mask 25 pcs.
NC II Goggles 25 pairs Goggles 25
pairs
Safety helmet 25 pcs. Safety helmet 25 pcs.
Fire extinguisher 2 unit Fire extinguisher 2 unit
Safety vest 25 pcs. Safety vest 25 pcs.
Hand pump 2 pcs. Hand pump 2 pcs.
Voltmeter pump 2 pcs. Voltmeter pump 2 pcs.
Equipment Equipment
Description Qty. Description
Off Highway Dump Truck 2 units Off Highway Dump Truck 2 units
(Articulated) (Articulated)
Water pressure washer 1 unit Water pressure washer 1 unit
Wheel loader 1 unit ---
Air compressor 1 unit Air compressor 1 unit
Materials Materials
Description Qty. Description Qty.
Grease 25 kls. Grease 25 kls.
Diesel oil 1600 Diesel oil 1600
liters liters
Waste rags 25 kls Waste rags 25 kls
Hydraulic oil 40 liters Hydraulic oil 40
liters
Distilled water 10 liters Distilled water 10
liters
II. B — TRAINING FACILITIES (TF)
CONSTRUCTION SECTOR
Qualification : 1 HEO (Articulated Off-Highway Dump Truck) NC II
Existing Amendment
• Must be a holder of Heavy Equipment Operation • Holder of National TVET Trainer Certificate Level I
(Articulated off-highway dump truck) NC-II (NTTC Level I) in HEO (Articulated Off-Highway Dump
• Must have undergone training on Training Methodology Truck) NC II
III (TM III) or its equivalent
• Must be physically and mentally fit • Must be physically fit
• Must have at least 5 years job/industry experience*
• Must have at least 5 years job/industry experience
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Description Qty Description Qty
Standard mechanical hand tools 2 sets Standard mechanical hand tools 2 sets
HEAVY Grease gun 2 pcs. Grease gun 2 pcs.
EQUIPMENT Mask 25 pcs. Mask 25 pcs.
OPERATION 25 pcs
Goggles 25 pcs Safety Goggles
(Backhoe
Safety helmet 25 pcs. Safety helmet 25 pcs.
Loader) NCII
Safety vest 25 pcs. Safety vest 25 pcs.
Fire Extinguisher 2 pcs. Fire Extinguisher 2 pcs.
Voltmeter pump 2 pcs. ---
Equipment Equipment
Description Qty Description Qty
Backhoe Loader 2 units Backhoe Loader 2 units
Water pressure washer 1 unit ---
Air compressor 1 unit ---
Materials Materials
Description Qty Description Qty
Grease 25 kls. Grease 25 kls.
Diesel oil 800 Diesel oil 800 liters
liters
Rags 25 kls. Rags 25 kls.
Engine oil 15Iiters Engine oil 15Iiters
Hydraulic oil 15 liters Hydraulic oil 15 liters
Fluid 1 liter Fluid 1 liter
Distilled water 5 liters Distilled water 5 liters
II. B — TRAINING FACILITIES (TF)
CONSTRUCTION SECTOR
Qualification : HEAVY EQUIPMENT OPERATION (Backhoe Loader) NCII
Existing Amendment
CONSTRUCTION SECTOR
Qualification : HEAVY EQUIPMENT OPERATION (Backhoe Loader) NC II
Existing Amendment
• Must be a holder of Heavy Equipment Operation • Holder of National TVET Trainer Certificate Level I
(Bulldozer) NC II or similar/equivalent qualification (NTTC Level I) in HEO (Bulldozer) NC II
• Must have undergone training on Training
• Must be computer literate
Methodology II (TM II) or equivalent in
training/experience • Must be physically fit
• Must be computer literate • Must have at least 5 years job/industry experience*
• Must be physically and mentally fit • Must have completed the 40-Hour Construction
Occupational Safety and Health (COSH) per
• Must have at least 5 years job/industry experience*
Department Order No. 13 s. 1998, Guidelines
• Must be a civil service eligible (for government Governing Occupational Safety and Health in the
position or appropriate professional license issued by Construction Industry conducted by OSHC and DOLE
the Professional Regulatory Commission) accredited Safety Training Organizations
II. A— LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
HEO (Concrete Description Qty. Description Qty.
Pump) NC II Standard mechanical hand tools 2 sets Standard mechanical hand tools 2 sets
Hard hat 25 pcs. Hard hat 25 pcs.
Ear guards 25 pcs. Ear guards 25 pcs.
Safety shoes 25 pairs Safety shoes 25 pairs
Plier 2 pcs. Plier 2 pcs.
Fire extinguisher 1 unit Fire extinguisher 1 unit
Eye goggles 25 pcs. Eye goggles 25 pcs.
Cover ails 25 pcs. Cover ails 25 pcs.
Eye goggles 25 pcs. Eye goggles 25 pcs.
Pressure gauge 1 set Pressure gauge 1 set
Hammer 5 pcs. Hammer 5 pcs.
Blunt chisel 5 pcs. Blunt chisel 5 pcs.
Equipment Equipment
Description Qty. Description Qty.
Two-way radio 2 pcs Two-way radio 2 pcs
Concrete Pump 1 unit Type of concrete pump stationary 1 unit
or trailer and Trackmounted
Materials Materials
Description Qty. Description Qty.
Sponge ball (soft) 3 units Sponge ball (soft) 3 units
Sponge ball (hard) 3 units Sponge ball (hard) 3 units
Ready mixed concrete* Ready mixed concrete*
Water 500 Water 500
liters liters
Engine oil 18 liters Engine oil 18 liters
Diesel fuel 800 Diesel fuel 800
liters liters
Hydraulic oil 50 liters Hydraulic oil 50 liters
Forming grease 10 kilos Forming grease 10 kilos
Suction filter 3 pcs. Suction filter 3 pcs.
Air filter 2 pcs. Air filter 2 pcs.
Waste rags 25 kilos Waste rags 25 kilos
II. B — TRAINING FACILITIES (TF)
CONSTRUCTION SECTOR
Qualification : HEO (Concrete Pump) NC II
Existing Amendment
• Must be a holder of Heavy Equipment Operation • Holder of National TVET Trainer Certificate Level I (NTTC
(Concrete Pump) NC II Level I) in HEO (Concrete Pump) NC II
• Must have undergone training on Training
• Must be physically fit
Methodology III (TM III) or its equivalent
• Must be physically and mentally fit • Must have at least 5 years job/industry experience*
• Must have at least 5 years job/industry experience*
• Must have completed the 40-Hour Construction
• Must be a civil service eligible (for government
Occupational Safety and Health (COSH) per Department
position only)
Order No. 13 s. 1998, Guidelines Governing Occupational
Safety and Health in the Construction Industry conducted
by OSHC and DOLE accredited Safety Training
Organizations
II. A LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
HEAVY EQUIPMENT Description Qty Description Qty
OPERATION (Container Wrenches (box and open-end 8-24 1 set Standard mechanical hand 2 sets
Stacker) NCII mm- tools
metric & 7/16 -
1" -English )
Hammer, ball peen (3-4 Ibs) 1 set ---
Pliers (mechanical 10") 1 set ---
Adjustable wrench (18") 1 pc ---
• *Must have at least 5 years job/industry • Must have at least 5 years job/industry
experience* experience
• Must be a civil service eligible (for government
position or appropriate professional license issued by • Must have completed the 40-Hour Construction
the Professional Regulatory Commission) Occupational Safety and Health (COSH) per
Department Order No. 13 s. 1998, Guidelines
Governing Occupational Safety and Health in the
Construction Industry conducted by OSHC and
DOLE accredited Safety Training Organizations
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Description Qty Description Qty
Wrenches (box and open-end 8-24 1 set Standard mechanical hand tools 2 sets
HEAVY EQUIPMENT mm- metric & 7/16 —1" -English )
OPERATION (Motor Hammer ballpeen (3-4 Ibs) 1 set Hammer ballpeen (3-4 Ibs) 1 set
Grader) NCII Pliers( mechanical 10 ") 1 set Pliers( mechanical 10 ") 1 set
Adjustable wrench (18 ") 1 pc Adjustable wrench (18 ") 1 pc
Grease gun 1 pc Grease gun 2 pcs.
Screw driver ( 10 " flat & Philips) 1 set Screw driver ( 10 " flat & Philips) 1 set
Putty knife 1 pc Putty knife 1 pc
Pry bar (heavy duty) 1 pc Pry bar (heavy duty) 1 pc
Pipe wrench (12") 1 pc Pipe wrench (12") 1 pc
Vise grip (12 ") 1 pc Vise grip (12 ") 1 pc
Tire gauge 1 pc Tire gauge 1 pc
Mask 25 pcs.
Safety Goggles 25 pcs
Safety helmet 25 pcs.
Safety vest 25 pcs.
Fire Extinguisher 2 pcs.
Equipment Equipment
Description Qty Description Qty
Motor grader(MOA /rental) 1 unit Motor grader(MOA /rental) 1 unit
Low bed trailer with tractor head & 1 unit ---
operator (MOA/rental)
Vacuum cleaner 1 unit Vacuum cleaner 1 unit
Portable electric air compressor 1 unit Portable electric air compressor 1 unit
Materials Materials
Description Qty Description Qty
Multi- purpose grease 5 kls. Multi- purpose grease 5 kls.
Engine oil ( SAE 15w40) 4 liters Engine oil ( SAE 15w40) 4 liters
Hydraulic / steering fluid (TELLUS 20 Hydraulic / steering fluid 20 liters
68/10W) liters (TELLUS 68/10W)
Final drive/ differential (gear oil GP90/ 10 Final drive/ differential (gear oil 10 liters
140) liters GP90/ 140)
Transmission oil (ATF) 10 Transmission oil (ATF) 10 liters
liters
Tandem oil GP90/140 10 Tandem oil GP90/140 10 liters
liters
Water coolant 4 liters Water coolant 4 liters
Diesel fuel 200 Diesel fuel 200
liters liters
Battery distilled water 5 pcs Battery distilled water 5 pcs
Primary & secondary air filter, 1 set Primary & secondary air filter, 1 set
Primary &secondary fuel filter 1 set Primary &secondary fuel filter 1 set
Water separator 1 pc Water separator 1 pc
Belts (air-con, water pump and 1 set Belts (air-con, water pump and 1 set
alternator) alternator)
Penetrating oil (250 ml) 2 Penetrating oil (250 ml) 2 cans
cans
Cotton rugs 2 kilos Cotton rugs 2 kilos
Cleaning solvent 5 liters Cleaning solvent 5 liters
Cleaning tool(one each kind) 1 set Cleaning tool(one each kind) 1 set
Working clothes 1 pair Working clothes 1 pair
Safety shoes 10 Safety shoes 10 pairs
pairs
Gloves 10 Gloves 10 pairs
pairs
Goggles 10 pcs Safety Goggles 10 pcs
Dust Mask 10 pcs Dusk Mask 10 pcs
Hard hats 10 pcs Hard hats 10 pcs
Operator's manual 1 pc Operator's manual 1 pc
CONSTRUCTION SECTOR
Qualification : HEAVY EQUIPMENT OPERATION (Motor Grader) NCII
Existing 1 Amendment
SPA CE REQUIREMENT SIZE IN METERS ' AREA IN SQ, TOTAL AREA IN Lecture Room 48.0
METERS SQ. METERS
Learning Resource 24.0
• Student/Trainee'sWokng 2.0 x 2.0 m 4 5ga per 100.0 icat
Center
Space student
• Lectu re Room 8.00 x 600 48.00 480 172.0.
• Learn in g Resource Center 4.00 x 6 00 24.00 24.0
Facilities/Equipment 1000.
172
- 52 / Circulation Area 0
• Facilities/Equipmenti -
Circulation Area TOTAL WORK AREA 1172.
TOTAL WORK AREA 224 0
Wok n g field 0,5 hectare (MOAIRental)
Working field
II. C — AMENDMENT TRAINER QUALIFICATIONS (TQ)
CONSTRUCTION SECTOR
Qualification : HEAVY EQUIPMENT OPERATION (Motor Grader) NCII
Existing Amendment
• Must be a holder of Heavy-Equipment Operation • Holder of National TVET Certificate Level I (NTTC
(Motor Grader) NC-II or equivalent qualification Level I) in HEO (Motor Grader) NC II
• Must have undergone training on Training • Musty be computer literate
Methodology II (TM II) or equivalent • Must be physically fit
training/experience • Must have at least 5 years job/ industry
• Must be computer-literate experience
• Must be physically and mentally fit • Must have completed the 40-Hour Construction
• Must have had at least 5 years job/industry Occupational Safety and Health (COSH) per
experience* Department Order No. 13 s. 1998, Guidelines
• Must be a civil-service eligible or holder of appropriate Governing Occupational Safety and Health in the
professional license issued by the Professional Construction Industry conducted by OSHC and
Regulatory Commission (for government position) DOLE accredited Safety Training Organizations
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
HEAVY Description Qty. Description Qty.
EQUIPMENT Standard mechanical hand tools 2 sets Standard mechanical hand 2 sets
OPERATION tools
(PAVER) NC II Multi meter 2 pcs. Multi meter 2 pcs.
Hydraulic pressure 1 set Hydraulic pressure 1 set
gauge with adapter gauge with adapter
Grease gun 2 pcs. Grease gun 2 pcs.
Safety helmet 25 pcs. Safety helmet 25 pcs.
Safety vest 25 pcs. Safety vest 25 pcs.
Goggles 25 pcs. Goggles 25 pcs.
Cotton gloves 25 pairs Cotton gloves 25
pairs
Fire extinguisher 1 pc. Fire extinguisher 1 pc.
Equipment Equipment
Description Qty. Description Qty.
Paver 1 unit Paver 1 unit
Dump truck or transit mixer 1 unit ---
Asphalt kettle 1 unit ---
Truck tractor with low bed 1 unit ---
collapsible trailer
Air compressor 1 unit Air compressor 1 unit
Materials Materials
Description Qty. Description Qty.
Diesel fuel 800 Diesel fuel 800
liters liters
Engine oil 15 liters Engine oil 15 liters
Hydraulic oil 20 liters Hydraulic oil 20 liters
Grease 5 kilos Grease 5 kilos
Waste rags 25 kilos Waste rags 25 kilos
Ready mixed asphalt or concrete* Ready mixed asphalt or
concrete*
Penetrating oil 2 Penetrating oil 2
Aerosol Aerosol
can can
II. B — TRAINING FACILITIES ITFI
CONSTRUCTION SECTOR
Qualification : HEAVY EQUIPMENT OPERATION (PAVER) NC II
Existing Amendment
• Must have at least 5 years job/industry • Must have at least 5 years job/industry
experience* experience
• Must be a civil service eligible (for
government position only) Must have completed the 40-Hour
Construction Occupational Safety and
Health (COSH) per Department Order
No. 13 s. 1998, Guidelines Governing
Occupational Safety and Health in the
Construction Industry conducted by
OSHC and DOLE accredited Safety
Training Organizations
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
HEAVY Description Qty Description Qty
EQU IPMENT wrenches (box and open-end 8-24 1 set Standard mechanical hand 2 sets
OPERATION (Rigid mm- metric & 7/16 —1" -English ) tools
off-Highway Dump Hammer ballpeen (3-4 lbs) 1 set
Truck) NCII Pliers( mechanical 10 ") 1 set
Adjustable wrench (18 ") 1pc
Grease gun 1pc. Grease gun 2 pcs.
Screw driver ( 10 " flat & Philips) 1 set
Putty knife 1pc.
Pry bar (heavy duty) 1pc.
Tire gauge (0-150 psi) 1 pc
Multi meter 2 pcs.
Hydraulic pressure 1 set
gauge with adapter
Safety helmet 25 pcs.
Safety vest 25 pcs.
Goggles 25 pcs.
Cotton gloves 25
pairs
Fire extinguisher 1 pc.
Equipment Equipment
Description Qty Description Qty
Off-Highway Dump Truck 1 unit Off-Highway Dump Truck 1 unit
(Compactor)(MOA /rental) (Compactor)(MOA /rental)
Low bed trailer(MOA / rental) 1 unit
Vacuum cleaner 1 unit Vacuum cleaner 1 unit
Materials Materials
Description Qty Description Qty
Multi-purpose grease 5 kls. Multi-purpose grease 5 kls.
Engine oi ( SAE 15w40) 4 Engine oi ( SAE 15w40) 4 liters
liters
Hydraulic / steering fluid (TELLUS 20 Hydraulic / steering fluid 20
68/10W) liters (TELLUS 68/10W) liters
Final drive/ differential (gear oil 10 Final drive/ differential (gear 10
GP90/ 140) liters oil GP90/ 140) liters
Transmission oil (ATF) 10 Transmission oil (ATF) 10
liters liters
Water coolant 4 Water coolant 4 liters
liters
Diesel fuel 200 Diesel fuel 200
liters liters
Battery distilled water 5 Battery distilled water 5 liters
liters
Working clothes 1 pair Working clothes 1 pair
Safety shoes 10 Safety shoes 10
pairs pairs
Gloves 10 Gloves 10
pairs pairs
Goggles 10 Goggles 10 pcs.
pcs.
Dust Mask 10 Dust Mask 10 pcs.
pcs.
Hard hat 10 Hard hat 10 pcs
pcs
Test weights 2 Test weights 2 units
- 3 tons units - 3 tons
-10 tons -10 tons
Crawler crane miniature 1 pc MOO
Existing Amendment
Existing Amendment
• Must be a holder of Heavy • Holder of National TVET Trainer Certificate Level I (NTTC
Equipment Operation (Rigid off- Level I) in HEO (Rigid Off-Highway Dump Truck) NC II
highway dump truck) — NCII
• Must be computer literate
• Must have undergone
training on Training Methodology II • Must be physically fit
(TM II)
• Must be computer literate • Must have at least 5 years job/industry experience
Existing Amendment
Existing Amendment
• Must be a holder of Heavy Equipment • Holder of National TVET Trainer Certificate Level I
Operation (Road Roller [Compactor]) NC-II (NTTC Level I) in HEO (Road Roller) NC II
• Must have undergone training on
Training Methodology II (TM II) • Must be computer literate
• Must be computer literate
• Must be physically fit
• Must be physically and mentally fit
• Must have at least 5 years • Must have at least 5 years job/industry experience
job/industry experience*
• Must be a civil service eligible (for • Must have completed the 40-Hour Construction
government position or appropriate professional Occupational Safety and Health (COSH) per
license issued by the Professional Regulatory Department Order No. 13 s. 1998, Guidelines
Commission) Governing Occupational Safety and Health in the
Construction Industry conducted by OSHC and
DOLE accredited Safety Training Organizations
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
HEO (Transit Description Qty. Description Qty.
Mixer) NC II Standard mechanical hand tools 2 sets Standard mechanical 2 sets
hand tools
Grease gun 2 pcs. Grease gun 2 pcs.
Mask 25 pcs. Mask 25 pcs.
Goggles 25 pcs. Goggles 25 pcs.
Safety helmet 25 pcs. Safety helmet 25 pcs.
Safety vest 25 pcs. Safety vest 25 pcs.
Fire extinguisher 2 pcs. Fire extinguisher 2 pcs.
Hand pump (fuel) 2 pcs. Hand pump (fuel) 2 pcs.
Voltmeter pump 2 pcs. Voltmeter 2 pcs.
Equipment Equipment
Description Qty. Description Qty.
Transit mixer 2 units Self loading mixer type 2 units
and Transit mixer type
w/cap. 3 cum. minimum
Batching plant 1 plant ---
Water pressure washer 1 pc. Water pressure washer 1 pc.
Wheel loader 1 unit ---
Air compressor 1 unit Air compressor 1 unit
Materials Materials
Description Qty. Description Qty.
Grease 25 kilos Grease 25 kilos
Diesel oil 800 liters Diesel oil 800 liters
Waste rags 25 kilos Waste rags 25 kilos
Engine oil 15 liters Engine oil 15 liters
Hydraulic oil 20 liters Hydraulic oil 20 liters
Gear oil 15 liters Gear oil 15 liters
Fluid 1 liter Fluid 1 liter
Distilled water 5 liters Distilled water 5 liters
Ready mixed concrete* Ready mixed concrete*
Concrete admixture* Concrete admixture*
II. B — TRAINING FACILITIES (TF)
CONSTRUCTION SECTOR
Qualification : HEO (Transit Mixer) NC II
Existing Amendment
SPACE REQUIREMENT SIZE IN METERS AREA IN QTY TOTAL SPACE SIZE IN AREA TOTAL
SQ. AREA IN REQUIREMENT METERS IN SQ. AREA
METERS SQ. METERS IN SQ.
METERS METERS
Lecture Area 48.0
• Lecture area 8.0 x 6.0 meters 48M2 1 48M2
Learning Resource 24,0
• Learning resource area 4.0 x 6.0 meters 24M2 1 24M2
Area
• ti area 3.0 x 3.0 meters
Tool room I Storage 9M2 1 9M2 Tool room/Storage 9,0
• Wash, toilet and locker 8.0 x 4.0 meters 32M2 1 32M2 area
MOM Wash, toilet and 32.0
TOTAL - - 113M2 locker room
Facilities : Equipment , - 5,000M2 TOTAL 113.0
Circulation' Facilities/Equipment/ 1000.0
TOTAL AREA 5,113M2 Circulation Area
latching plant and its area, aggregate yard, transit mixer and wheel loader (M0A) TOTAL AREA 1,113.0
• Must be a holder of Heavy Equipment Operation • Holder of National TVET Trainer Certificate Level I
(Transit Mixer) NC II (NTTC Level I) in HEO (Transit Mixer) NC II
CONSTRUCTION SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
HEO (Wheel Description Qty. Description Qty.
Loader) NC Open end wrench 18 pcs. per set metric size 2 sets Standard mechanical hand 2 sets
II tools
Box wrench, 18 pcs. Pre set, metric size 2 sets Box wrench, 18 pcs. Pre set, 2 sets
metric size
Socket wrench, 18 pcs. Per set, metric size 2 sets Socket wrench, 18 pcs. Per set, 2 sets
metric size
Tire pressure gauge 2 unit Tire pressure gauge 2 unit
Belt tension gauge 2 unit Belt tension gauge 2 unit
Cooling system analyzer 2 unit Cooling system analyzer 2 unit
Ball pen hammer 2 pcs. Ball pen hammer 2 pcs.
Standard screw driver 2 sets Standard screw driver 2 sets
Assorted size, six pcs, per set. Assorted size, six pcs, per set.
Philip screw driver, Assorted size, six pcs. 2 sets Philip screw driver, Assorted 2 sets
Per set. size, six pcs. Per set.
Vice grip 2 pcs. Vice grip 2 pcs.
Long nose pliers 2 pcs. Long nose pliers 2 pcs.
Electrician Pliers 2 pcs. Electrician Pliers 2 pcs.
Side cutting pliers 2 pcs. Side cutting pliers 2 pcs.
Grease gun 2 unit Grease gun 2 unit
Equipment Equipment
Description Qty. Description Qty.
Wheel Loader 1 unit Wheel Loader w/ 3.0 cum 1 unit
meter capacity bucket
Dump truck 1 unit Simulated or mock elevated 1 unit
dump box
Low- or high-bed Trailer 1 unit ---
Materials Materials
Description Qty. Description Qty.
Wheel Loader air cleaner 5 pcs. Wheel Loader air cleaner 5 pcs.
Diesel engine oil 4 gals. Diesel engine oil 4 gals.
Battery lug/terminal 10 pcs Battery lug/terminal 10 pcs
Brake fluid 1 gal. Brake fluid 1 gal.
Distilled water 10 ltrs. Distilled water 10 Its.
Gear oil 5 gals. Gear oil 5 gals.
Hydraulic fluid 3 gals. Hydraulic fluid . 3 gals.
Multi purpose grease 1 gal. Multi purpose grease 1 gal.
Coolant additives - 350m1. 10 Coolant additives - 350m1. 10 btls.
btls.
Wheel loader fuse, assorted amperes rating 40 Wheel loader fuse, assorted 40 pcs.
pcs. amperes rating
Penetrating oil 3 can Penetrating oil 3 can
II. B — TRAINING FACILITIES (IF)
CONSTRUCTION SECTOR
Qualification : HEO (Wheel Loader) NC II
Existing Amendment
CONSTRUCTION SECTOR
Qualification : HEO (Wheel Loader) NC II
Existing Amendment
Pressure gauge 1/4 size —(0- 2 units Pressure gauge 1/4 size —(0- 2 units
300psi) 300psi)
Pick Mattock 3 units Pick Mattock 3 units
Steel Tape (5m) 6 pcs. Steel Tape (5m) 12 pcs.
Equipment Equipment
Description Qty. Description Qty.
Manual Test pump 1 unit Manual Test pump 1 unit
Fusion Machine (20mm — 1 unit Fusion Machine (20mm — 1 unit
32mm) 32mm)
Electric Drill (drill bit 1/4" -'/2") 2 units Electric Drill (drill bit 1/4" -'/2") 2 units
Blow torch 4 units Blow torch 4 units
Electric Grinder (4") 2 units Electric Grinder (4") 2 units
Hard Hat 25 pcs. Hard Hat 25 pcs.
Safety Shoes 25 pcs. Safety Shoes 25 pcs.
Goggles 25 pcs. Goggles 25 pcs.
Hand Gloves 25 pcs. Hand Gloves 25 pcs.
Dust Masks 25 pcs. Dust Masks 25 pcs.
Face Shield 12 pcs. Face Shield 12 pcs.
Materials Materials
Description Qty. Description Qty.
Pattern paper 6 rolls Pattern paper 5 rolls
Pen and pencil 2 boxes Pen and pencil 2 boxes
PPR Pipes and Fittings
PPR Pipes 20mm x 4 mtrs. 25 pcs. PPR Pipes 20mm x 4 mtrs. 25 pcs.
PPR Gate Valve 20mm 25 pcs. PPR Gate Valve 20mm 5 pcs.
PPR Tee Equal 20m x 20mm 150 pcs. PPR Tee Equal 20m x 20mm 24 pcs.
PPR Tee Female 20mm x'/2" 225 pcs. PPR Tee Female 20mm x'/2" 24 pcs.
PPR Equal Elbow 20mm x 150 pcs. PPR Equal Elbow 20mm x 90° 30 pcs.
90°
PPR Elbow Female 20mm x 75 pcs. PPR Elbow Female 20mm x 1/2 10 pcs.
1/2 x 90° x90°
PPR End Cap 20mm 150 pcs. PPR End Cap 20mm 24 pcs.
PPR Male Adapter 1/2" 150 pcs. PPR Male Adapter 1/2" 12 pcs.
PPR Female Adapter 1/2" 150 pcs. PPR Female Adapter 1/2" 12 pcs.
G.I. Plug 1/2" 175 pcs. G.I. Plug 1/2" 15 pcs.
Teflon Tape 3/4" 150 rolls Teflon Tape 3/4" 50 rolls
Plumbing Fixtures
Water Meter 5 units Water Meter 5 units
Water Closet (Flush Tank) 5 units Water Closet (Flush Tank) 5 units
Lavatory with faucet 5 sets Lavatory with faucet 5 sets
Kitchen Sink with faucet 5 sets Kitchen Sink with faucet 5 sets
Single Point water heater 5 units Single Point water heater 5 units
Floor drains 15 pcs. Floor drains 15 pcs.
Faucets 10 sets Faucets 10 sets
Sanitary, Waste and Vent
System
PVC Pipe 4" x 3m s-1000 16 lengths PVC Pipe 4" x 3m s-1000 5 lengths
PVC Pipe 2" x 3m s-1000 25 lengths PVC Pipe 2" x 3m s-1000 10 lengths
PVC Wye 4" x 4" 25 pcs. PVC Wye 4" x 4" 10 pcs.
PVC Wye 4" x 2" 150 pcs. PVC Wye 4" x 2" 15 pcs.
PVC Tee 4" x 2" 225 pcs. PVC Tee 4" x 2" 15 pcs.
PVC Tee 2" x 2" 200 pcs. PVC Tee 2" x 2" 20 pcs.
PVC Elbow 4" x 90° 50 pcs. PVC Elbow 4" x 90° 10 pcs.
PVC Elbow 4" x 45° 50 pcs. PVC Elbow 4" x 45° 10 pcs.
PVC Elbow 2" x 90° 300 pcs. PVC Elbow 2" x 90° 30 pcs.
PVC Elbow 2" x450° 150 pcs. PVC Elbow 2" x450° 30 pcs.
PVC P- Trap 2" 50 pcs. PVC P- Trap 2" 10 pcs.
PVC Cleanout 4" 25 pcs. PVC Cleanout 4" 5 pcs.
PVC Solvent Cement 400cc 15 cans PVC Solvent Cement 400cc 5 cans
Cold Water Supply and
Distribution Piping
PVC Blue Pipe 1/2" x 10' 25 pcs. PVC Blue Pipe 1/2" x 10' 5 pcs.
PVC Tee 1/2" x 1/2" 150 pcs. PVC Tee 1/2" x 1/2" 24 pcs.
PVC Tee Female 1/2" x'/2" 150 pcs. PVC Tee Female 1/2" x 1/2" 24 pcs.
PVC Elbow 1/2" x 90° 150 pcs. PVC Elbow 1/2" x 90° 30 pcs.
PVC Elbow Female 1/2" x 90° 75 pcs. PVC Elbow Female 1/2" x 90° 10 pcs.
PVC Cap 1/2" 150 pcs. PVC Cap 1/2" 24 pcs.
PVC Male Adapter 1/2" 100 pcs. PVC Male Adapter 1/2" 12 pcs.
PVC Female Adapter 1/2" 100 pcs. PVC Female Adapter 1/2" 12 pcs.
G.I. Plipes and Fittings
G I Pipe 1/2 " x 20 sch. 40 13 pcs. G.1 Pipe 1/2 " x 20 sch. 40 2 pcs.
Gate Valve IA" — kitz brand 25 pcs. Gate Valve IA" — kitz brand 5 pcs.
G.I. Tee /2" x 1/2" 75 pcs. G.I. Tee 1/2" x IA" 12 pcs.
G.I. Elbow/2" x 90° 100 pcs. G.I. Elbow'/2" x 90° 15 pcs.
G.I. Cap n1/2" 50 pcs. Cl,
. Cap n1/2" 15 pcs.
Single shower valve 5 pcs. Single shower valve 2 pcs.
Pressure gauges (3" dia. X 1/4" dia. 5 pcs. Pressure gauges (3" dia. X 1/4" dia. 5 pcs.
0-300 psi) 0-300 psi)
Steel Tape (5m) 25 pcs. Steel Tape (5m) 12
pcs.
Hacksaw with Blade 25 pcs. Hacksaw with Blade 5 pcs.
Spirit level bar 24" length 5 pcs. Spirit level bar 24" length 5 pcs.
Pipe Reamer 5 units Pipe Reamer 2 units
Pipe Vise 1" — 4" (2 Yoke vise and 4 units Pipe Vise 1" — 4" (2 Yoke vise and 2 1 unit
2 chain vise) chain vise)
Pipe Cutter 1/2" — 2" 5 pcs. Pipe Cutter 1/2" — 2" 2 pcs.
Ballpeen Hammer 25 pcs. Ballpeen Hammer 12 pcs.
Pointed Cold Chisel (various 25 pcs. Pointed Cold Chisel (various length 6 pcs.
length 10" -12") 10" -12")
Electrical Plier 5 pcs. Electrical Plier 5 pcs.
Plumb Bob (Std. size) 5 pcs. Plumb Bob (Std. size) 5 pcs.
Mechanical Plier 5 pcs. Mechanical Plier 5 pcs.
Adjustable wrench (3each 10" & 6 pcs. Adjustable wrench (10") 2 pcs.
12") Adjustable wrench (12") 2 pcs.
Flat Screw Driver 10" 5 pcs. Flat Screw Driver 10" 5 pcs.
Philip Screw Driver 10" 5 pcs. Philip Screw Driver 10" 5 pcs.
Cold Chisel (var. lengths 8"-12" 25 pcs. Cold Chisel (var. lengths 8"-12" 6 pcs.
dia. 5/8") dia. 5/8")
Equipment Equipment
Description Qty. Description Qty.
Threading Machine complete with 1 unit Threading Machine complete with 1 unit
the following 220 V the following 220 V
1 units Die head 2 units Die head
2 sets dies (1/2" & 3/4" — 1" — 2") 2 sets dies (1/2" & 'A" — 1" — 2")
1 pc pipe reamer 1 pc pipe reamer
1 pc pipe cutter 1 pc pipe cutter
Fusion Machine (20mm — 32mm) 2 units Fusion Machine (20mm — 32mm) 2 units
Electric Drill (drill bit 1/4" — 5/8") 2 units Electric Drill (drill bit 1/4" — 5/8") 2 units
Manual Test Pump 2 units Manual Test Pump 1 unit
Cutting outfit set (Harris or Morris) 1 set Cutting outfit set (Harris or Morris) 1 set
with oxygen / acetylene cylinder with oxygen / acetylene cylinder
with gas content (refillable) with gas content (refillable)
Electric Grinder (4") 2 units Electric Grinder (4") 2 units
Portable Soldering Kit 5 Portable Soldering Kit 5
cylinders cylinders
Welding machine 300 amperes 1 unit Welding machine 300 amperes 1 unit
1—
with grounding and extension with grounding and extension
cable, electrode holder and cable, electrode holder and
welding mask. welding mask.
Electric Test Pump 1 unit Electric Test Pump 1 unit
Cut-off machine (14" dia. cutting 1 unit Cut-off machine (14" dia. cutting 1 unit
disc) disc )
Materials Materials
Description Qty. Description Qty.
Plumbing Blue - print plan 6 sets Plumbing Blue - print plan 5 sets
Paint brush 9 3 each, 1" & 1 IA") 6 pcs. Paint brush 5 pcs
Sand Paper (12" x 12" rough) 10 Sand Paper (12" x 12" rough) 10
sheets sheets
Chalk Stone 6 pcs. Chalk Stone 6 pcs.
Writing Paper 1 pad Writing Paper 1 pad
Welding Rod ( each 6011 and 2 kls. Welding Rod ( each 6011 and 2 kls.
6013 x 1/8" 6013 x 1/8"
G.I. Wire # 18 2 kls. G.I. Wire # 18 2 kls.
PPR Pipes and Fittings
PPR Pipe 32mm x 4 mtrs. 5 pcs. PPR Pipe 32mm x 4 mtrs. 2 pcs.
PPR Pipes 20mm x 20mm 25 pcs. PPR Pipes 20mm x 20mm 10 pcs.
PPR Gate Valve 20mm 25 pcs. PPR Gate Valve 20mm 5 pcs.
PPR Tee Equal 20mm x 20mm 150 pcs. PPR Tee Equal 20mm x 20mm 24 pcs.
PPR Tee Female 20mm x IA" 225 pcs. PPR Tee Female 20mm x'/2' 24 pcs.
PPR Equal Elbow 20mm x 90° 150 pcs. PPR Equal Elbow 20mm x 90° 30 pcs.
PPR Elbow Female 20mm x'/2" x 75 pcs. PPR Elbow Female 20mm x IA" x 10 pcs.
90° 90°
PPR End Cap 20mm 75 pcs. PPR End Cap 20mm 15 pcs.
PPR Male Adapter IA" 150 pcs. PPR Male Adapter IA" 12 pcs.
PPR Female Adapter 1/2" 150 pcs. PPR Female Adapter IA" 12 pcs.
PPR Tee Reducer 32mm x 20mm 5 pcs. PPR Tee Reducer 32mm x 20mm 5 pcs.
Single shower valve 25 pcs. Single shower valve 5 pcs.
Plumbing Fixtures
Water Meter 5 units Water Meter 2 units
Water Closet (Flush Tank) with 5 units Water Closet (Flush Tank) with 2 units
Bidet Spray Bidet Spray
Lavatory with faucet 5 sets Lavatory with faucet 2 sets
Kitchen Sink with faucet 5 sets Kitchen Sink with faucet 2 sets
Multipoint water heater 2 units No Amendments
Floor drains 15 pcs. Floor drains 5 pcs.
Faucets 10 sets Faucets 5 sets
Bath Tub with complete fittings 1 set Bath Tub with complete fittings 1 set
Urinal with push-button or flush 1 set Urinal with push-button or flush 1 set
valve and complete fittings valve and complete fittings
Grease trap, 4 gpm capacity 2 units Grease trap, 4 gpm capacity 2 units
Sanitary, Waste and Vent
System
PVC Pipe 6" m x 3m s-1000 8 PVC Pipe 6" m x 3m s-1000 5
lengths lengths
PVC Pipe 4" m x 3m 16 PVC Pipe 4" m x 3m s-1000 5
s-1000 lengths lengths
PVC Pipe 3"m x 3"m s-1000 5 PVC Pipe 3"m x 3"m s-1000 5
lengths lengths
PVC Pipe 2"m x 3"m s-1000 30 PVC Pipe 2"m x 3"m s-1000 10
length length
PVC Wye 6" x 4" 5 pcs. PVC Wye 6" x 4" 5 pcs.
PVC Wye 4" x 4" 12 pcs. PVC Wye 4" x 4" 12 pcs.
PVC Wye 4" x 2" 15 pcs. PVC Wye 4" x 2" 15 pcs.
PVC Tee 4" x 2" 10 pcs. PVC Tee 4" x 2" 10 pcs.
PVC Tee 2" x 2" 40 pcs. PVC Tee 2" x 2" 20 pcs.
PVC Elbow 4" x 90° 12 pcs. PVC Elbow 4" x 90° 12 pcs.
PVC Elbow 2" x 90° 35 pcs. PVC Elbow 2" x 90° 24 pcs.
PVC Elbow 4" x 45° 10 pcs. PVC Elbow 4" x 45° 5 pcs.
PVC Elbow 2" x 45° 20 pcs. PVC Elbow 2" x 45° 15 pcs.
PVC Elbow 3" x 90° 5 pcs. PVC Elbow 3" x 90° 5 pcs.
PVC P- Trap 2" 15 pcs. PVC P- Trap 2" 10 pcs.
PVC Cleanout 4" 5 pcs. PVC Cleanout 4" 5 pcs.
PVC Solvent Cement 400cc 4 cans PVC Solvent Cement 400cc 2 cans
PVC Wye 4" x 3" 5 unit PVC Wye 4" x 3" 3 pcs.
PVC Wye 3" x 2" 10 pcs. PVC Wye 3" x 2" 5 pcs.
PVC Elbow 3" x 45° 10 pcs. PVC Elbow 3" x 45° 5 pcs.
PVC Cleanout 3" 5 pcs. PVC Cleanout 3" 5 pcs.
Cold Water Supply and
Distribution Piping
PVC Blue pipe 1" x 3 mtrs. 5 pcs. PVC Blue pipe 3/4" x 3 mtrs. 5 pcs.
PVC Tee Reducer 1" x 1/2" 5 pcs. PVC Tee Reducer 3/4" x'/2" 5 pcs.
PVC Blue Pipe /2" x 10' 25 pcs. PVC Blue Pipe /2" x 10' 5 pcs.
PVC Tee %" x 1/2" 150 pcs. PVC Tee %" x 1/2" 24 pcs.
PVC Tee Female 1/2" x IA" 150 pcs. PVC Tee Female 1/2" x 1/2" 24pcs.
PVC Elbow 1/2" x 90° 150 pcs. PVC Elbow IA" x 90° 30 pcs.
PVC Elbow Female IA" x 90° 75 pcs. PVC Elbow Female 1/2" x 90° 10 pcs.
PVC Cap I/2" 75 pcs. PVC Cap IA" 24 pcs.
PVC Male Adapter I/2" 100 pcs. PVC Male Adapter IA" 12 pcs.
PVC Female Adapter 1/2" 100 pcs. PVC Female Adapter 1/2" 12 pcs.
Teflon Tape 150 rolls Teflon Tape 50 rolls
G.I Plug /2" 200 pcs. G.I Plug IA" 15 pcs.
Gate Valve 1/2" Screwed Type 25 pcs. Gate Valve /2" Screwed Type 10 pcs.
G.I. Plipes and Fittings
G.I. Pipe 1" x 6 mtrs. 5 pcs. G.I. Pipe 3/4" x 6 mtrs. 2 pcs.
G.I. Tee Reducer 1" x'/2" 5 pcs. G.I. Tee Reducer 3/4" x'/2" 5 pcs.
G.I. Pipe 1/2" x 20 sch. 40 13 pcs. G.I. Pipe I/2" x 20 sch. 40 2 pcs.
Gate Valve IA" - Screwed Type 25 pcs. Gate Valve IA" - Screwed Type 5 pcs.
Cl.
. Tee /2" x /2" 75 pcs. Cl.
. Tee /2" x /2" 12 pcs.
G.I. Elbow IA" x 90° 100 pcs. G.I. Elbow /2" x 90° 15 pcs.
G.I. Cap I/2" 75 pcs. G.I. Cap I/2" 15 pcs.
G.I. Plug 1/2" 175 pcs. G.I. Plug 1/2" 15 pcs.
II. B — TRAINING FACILITIES (TF)
CONSTRUCTION SECTOR
Qualification : Plumbing NC II
Existing Amendment
Existing Amendment
Existing Amendment
For RENEWAL:
• CPD units, work Immersion, relevant seminars/refresher
training will be accepted as part of the requirements for
renewal.
II. A - LIST OF TOOLS, EQUIPMENT AND MATERIALS
HUMAN HEALTH/HEALTH CARE SECTOR
Qualification Existing TEM Amendment TEM
Tools Tools
Hilot (wellness Description Qty Description Qty
massage) NC II Thermometer 10 Thermometer (digital) 10 pcs
Sphygmomanometer 5 Sphygmomanometer 5 pcs
Stethoscope 5 Stethoscope 5 pcs
Equipment Equipment
Description Qty Description Qty
CD/DVD Player (CD/DVD) 1 Flash drive 1 pc
TV 1 TV 1 unit
OHP 1 Desktop/Laptop 1 unit
LCD Projector 1 unit
Whiteboard 1 Whiteboard/ Blackboard 1 pc _
Stool 10 Stool 10 pcs
Trolley 2 Trolley 2 pcs
Massage Table: 3 Massage Table: 3 units
L = 1.8M L= 1.8M .
W = 0.8M W = 0.8M
H = 0.7 M H = 0.7 M
Materials Materials
Description Qty Description Qty
Coconut Oil 5 btls. Coconut Oil 5 btls.
Banana Leaf Strips and Other 10 Banana Leaf Strips and Other 10 pcs
Leaves Leaves
Bath towels 10 Bath towels 10 pcs
Face towel/hand towel 30 Face towel/hand towel 30 pcs
Bed sheets 10 Bed sheets 10 pcs
Bowls 10 Bowls 10 pcs
Shorts 10 Shorts 10 pcs
Pillows 6 Pillows 6 pcs
Smock gowns/bath 10 Smock gowns/bath 10 pcs
robes/Malongs robes/Malongs
Gauze masks 10 Surgical/Cloth mask or any of the 10 pcs
kind
Pillow cases 10 Pillow cases _ _ 10 pcs
Alcohol (Ethyl)/Hand Sanitizer 5 Alcohol (Ethyl)/Hand Sanitizer 5 pcs
Basins 5 Basins 5 pcs
Couch Roll (Disposable Paper) 5 Couch Roll (Disposable Paper) 5 pcs
Whiteboard marker/ Chalk and 3 sets
eraser
References: Anatomy, References: Anatomy,
Physiology and First Aid Physiology and First Aid
II. B - TRAINING FACILITIES (TF)
HUMAN HEALTH/HEALTH CARE SECTOR
Qualification: HILOT (WELLNESS MASSAGE) NC II
Existing Amendment
3.5 TRAINING FACILITIES
HILOT (WELLNESS MASSAGE) NC II
The Hilot (Wellness Massage) Therapy Learning Facility must be of concrete structure.
Based on class size of 20 students / trainees the space requirements for the teaching I
learning and curriculum areas are as follows.
Circulation Area 1 45
(SfTPS+PSR+TRC+CR) X 30%
Circulation Area 20 sq. m.
(40+6+10+10) X 30%=19.8sq.m.)
-- No Amendment
Separate Restrooms for Male and Female Trainees/ 2 x 5 m. 10 sq. m.
Students (CR)
1 he training center should have a simulation room of a pharmacy set-up (see Annex 1) The simulation room should
lave shelves (see Annex 2) for display of products and a sink area at the minimum This simulation room may be
ntegrated within the S/TPS. In addition to that, partnership may be forged with an operating pharmacy or existing
)harmacy drug store where Candidates can visit and observe
A The EMERGENCYMEDICAL SERVICES NC II Learning Facility must be of concrete A. The Emergency Medical Services Learning Facility must be of concrete
structure. Based on class size of 20 students' trainees, the space requirements for the structure. Based on class size of 20 students / trainees. the space
teaching learning and curriculum areas are as follows. requirements for the teaching / learning and curriculum areas are as follows:
B. Identified Area for Driving can be outside the facility since it requires a bigger
outdoor area for needed maneuvers
II. C - AMENDMENT TRAINER'S QUALIFICATION (TQ)
HUMAN HEALTH/HEALTH CARE SECTOR
Qualification: EMERGENCY MEDICAL SERVICES NC II
Existing Amendment
■ Must be a holder of NTTC Level I in ■ Must be a holder of National TVET Trainers
Emergency Medical Services NC II Certificate (NTTC) Level I in Emergency Medical
■ Equivalent training/experience or accredited by Services NC II;
any of the following: Department of Health, Philippine ■ Must have undergone training on Emergency
College of Emergency Medicine, Philippine Society of Medical Services NC III or any other similar training
Emergency Care Nurses, Philippine Society of for Emergency Medical Technicians;
Emergency Medical Technician, Philippine Red ■ With at least 2 years experience in the
Cross, Bureau of Fire and Protection -EMS and emergency health care service (pre-hospital care);
Emergency Response Unit Foundation (ERUF) or
■ With at least 2 years experience in the NOTE: Emergency health care service (pre-
emergency health care service (pre-hospital care) hospital care) experience should be evidenced by a
■ Must be physically, emotionally and mentally fit Certificate of Employment or Service Record
as certified by a Licensed Philippine Physician
■ Must not have any criminal record
II. A - AMENDMENT LIST OF TOOLS, EQUIPMENT AND MATERIALS
ICT SECTOR
Qualification Existing TEM Amendment
CABLE TV (CATV) Tools Tools
INSTALLATION Item/ Description Qty Item/ Description Qty
NC II set of wrenches 3 set of wrenches 3 sets
Set of screwdrivers 3 Set of screwdrivers 3 sets
torque wrench 3 torque wrench 3 sets
F-open wrench 3 F-open wrench 3 sets
bolt cutter 1 bolt cutter 1 pc
cable cutter 3 cable cutter 5 pcs
NT cutter / blade cutter 3 NT cutter / blade cutter 5 pcs
Staple gun 3 Staple gun 5 pcs
Technician's knife 3 Technician's knife 5 pcs
Cable prep tool 3 Cable prep tool 5sets
set of hammer 2 set of hammer 3 sets
set of pliers 3 set of pliers 5sets
Coring tools 2 Coring tools 2 sets
Blow torch 2 Blow torch 2 pcs
Center conductor's stripper 2 Center conductor's stripper 2 pcs
hacksaw 2
cable tensioner/ rachet/ coping cable tensioner/ rachet/ coping jack
1 1 unit
jack
Crimping/ compression tool 3 Compression Tool 3 pcs
cable guide 1 cable guide 1 unit
aerial handline 1 aerial handline 1 set
set of ropes 1 set of ropes 1 set
tape linen/steel tape 1 tape linen/steel tape 1 pc
multiple cable puller 1-
come-a-long/guy grip 1 Messsseger/ Guy grip 1 set
Step ladder 1 Step ladder 1 unit
fixing brackets/ clamps 1-
lay-up stick / cable lifter 1 lay-up stick / cable lifter 1 unit
drill/electric drill (w/ bits of drill/electric drill (w/ bits of various
1 1 unit
various sizes) sizes)
adjustable wrench 3 adjustable wrench 3 sets
extension ladders (24 ft. length) 1 extension ladders (24 ft. length) 1 unit
bender board/cable form 1 bender board/cable form (optional) 1 unit
messenger wire raising tool 1-
Diagonal side cutter 3 Diagonal side cutter 3 set
Additional Tools for fiber-optics:
Power Meter 1 unit
Buffer Tube Stripper 1 unit
Cable slitter 1 unit
Fiber stripper 1 unit
Kevlar cutter 1 unit
Alcohol dispenser 3 units
PON Meter 1 unit
Fiber Cleaver 1 unit
Fiber Fusion Splicer 1 unit
OTDR 1 unit
Fiber Optic Light Source 1 unit
Visual Fault Locator (VFL) 1 unit
Fiber Scope 1 unit
Fiber Connector Cleaner 1 unit
Equipment Equipment
Item/ Description Qty Item/ Description Qty
VOM 3 Multitester 1 unit
lineman boom truck* 1 lineman boom truck* 1 unit
cable trailer* 1 cable trailer* 1 unit
reel stand* 1 reel stand* 1 unit
lashing machine* 1 lashing machine* 1 unit
Addressable box/converter 1 Set-top Box (STB) 1 unit
IPTV Box 1 unit
Power supply 1 Power supply 1 unit
Trunk amplifier 1 Trunk amplifier 1 unit
Line extender 1 Line extender 1 unit
Node 1 _ Node 1 unit
F.I. meter 1 F.I. meter 1 unit
In-house amplifier 1 In-house amplifier 1 unit
Cable modem 1
cable roller block (single or
1
multiple cable)
Service vehicle* 1 Service vehicle* 1 unit
Power inserter 1 Power inserter 1 unit
Splitter (2-way) 1 Splitter (2-way) 1 unit
directional coupler 1 directional coupler 1 unit
tap-offs (2-, 4-,8-ways) 3 tap-offs (2-, 4-,8-ways) 1 unit
LCP Closure 1 unit
Fiber Distribution Box/NAP 1 unit _
PLC Splitter (1x4,1x8) 2 units
Customer premises
equipment:
TV set 1 TV set 1 unit
LCD / plasma monitor with or LED / plasma monitor with or without 1 unit
1
without tuner** tuner**
Addressable box/ converter 1 Set Top Box (STB) 1 unit
IPTV Box 1 unit
Home theater equipment** 1 Home theater equipment** 1 unit
DVD /VCD /MP3 players 1 DVD /VCD /MP3 players 1 unit
Personal computers/ internet / Personal computers/ internet / VolP
1 1 unit
VolP
Cable modem / router 1 Cable modem 1 unit
ONU/ONT 1 unit
Router/WiFi Access Point 1 unit
PPE: PPE:
body belt & strap body belt & strap 10 sets
hard hat/ helmet hard hat/ helmet 10 pcs
set gloves set gloves 10 pairs
safety shoes safety shoes 10 pairs
Safety goggles Safety goggles 10 paira
tool pouch/holster tool pouch/holster 10 pcs
safety cones/other collapsible safety cones/other collapsible signs 3 sets
signs
Materials Materials
Item/ Description Qty Item/ Description Qty
messengered cable messengered cable 1 roll
set of suspension clamps set of suspension clamps 3 sets
pole extension arm pole extension arm 3 pcs
cable-loop form / X-frame cable-loop form / X-frame 5 pcs
pole insulator pole insulator 5 pcs
ground/guying insulator ground/guying insulator 5 pcs
pole clamps of various sizes pole clamps of various sizes 5 sets
guy protector guy protector 5 pcs
set of guy grips set of guy grips 5 sets
braces braces 5 sets
tie wrap tie wrap 5 sets
cable clip cable clip 5 sets
pole tag pole tag 5 sets
cable tag cable tag 5 sets
sets of washer, bolts and nuts sets of washer, bolts and nuts 5 sets
guying fixtures guying fixtures 5 sets
sets of washer, bolts and nuts, sets of washer, bolts and nuts, 5 sets
machine bolts machine bolts
machine bolts — straight, thimble- machine bolts — straight, thimble-eye 1 set
eye and bent types and bent types
stainless lashing wire stainless lashing wire 1 roll
lashing wire clamps lashing wire clamps 60 pcs
messenger-wire clamps messenger-wire clamps 60 pcs
thimble eye nut thimble eye nut 60 pcs
stainless strap and buckle stainless strap and buckle 5 sets
cable roller cable roller 5 units
spiral sleeve spiral sleeve 5 pcs
standard rope standard rope 5 rolls
color coded marked tape color coded marked tape 5 rolls
extension arm extension arm 2 pcs
F-connectors (crimped or F-connectors (crimped or 5 sets
compression type) compression type)
grounding wire (gauge 12, grounding wire (gauge 12, stranded) 1 roll
stranded)
grounding rod (1/4' by 4' with grounding rod (1/4' by 4' with clamp) 5 pcs
clamp)
TW wire (gauge 12, stranded or TW wire (gauge 12, stranded or 1 roll
solid) solid)
screw hooks screw hooks 5 sets
lag screws lag screws 5 sets
terminators terminators 5 sets
sidewalk guy fixture sidewalk guy fixture 2 sets
bonding clamp bonding clamp 5 sets
anchor and grounding rods anchor and grounding rods 2 sets
cable support cable support 10 sets
cable spacer cable spacer 10 sets
adhesive tape adhesive tape 10 rolls
strand clamps strand clamps 10 sets
heat shrink heat shrink 10 sets
silicon gel
tap-off bracket
conduit / GI pipes conduit / GI pipes 1 tube
electric meter electric meter 1 unit
circuit breaker circuit breaker 1 unit
Drop cable Coaxial Drop Cable 1 roll
cable tie cable tie 60 pcs
rubber boots rubber boots 5 pairs
grounding block grounding block 5 pcs
P-hook P-hook 5 pcs
Philippine Electronics Code (Book 3) 1 set
Materials for Fiber-optics:
Optical closure Optical closure 5 kits
Patchcord Patchcord (SC/APC,SC/UPC) 5 pcs
Pigtail Pigtail (SC/APC,SC/UPC) 5 pcs
Pole clamp Pole clamp, various sizes 5 sets
X-Frame Fiber Management X-Frame Fiber Management 5 sets
Preformed Wire 1/4 Preformed Wire 1/4 1 roll
Optical Adapter Optical Adapter 5 sets
Optical Distribution Frame (Patch Optical Distribution Frame (Patch 5 units
Panel) Panel)
Fusion Sleeves Fusion Sleeves 5 sets
3-bolt suspension clamp 3-bolt suspension clamp 5 sets
Cable Clip for Fiber Drop (Nail 200 pcs
Buckle or Screw Buckle)
House Bracket (C-Clamp/P-Hook) 2 sets
C-Clamp S-Type 2 sets
Fiber Distribution Box/NAP 2 sets
LCP Closure 2 sets
Cable Coiling Ring 2 sets
Stainless Steel Strap 3/8" x 0.40mm 2 sets
Stainless Buckle 3/8" 2 sets
Mid Span Clamp 2 sets
Cable Tie 80mmx2.5mm 60 pcs
Fiber Drop Cable 2 sets
Customer Terminal Box 2 sets
Fiber Mechanical Connector/FIC 2 sets
(SC/APC,SC/UPC)
ONU/ONT 2 sets
Alcohol 99.9% Isopropyl Alcohol 99.9% Isopropyl 1 liter
Tissue paper Tissue paper 6 rolls
Trash Bin 2 pcs
Total 116
Total 128
Facilities; Equipment; 37
Circulation"
" Area requirement is equivalent to 3O' of the total teaching learning areas
Total 159
PPE: PPE:
body belt & strap body belt & strap 5 sets
hard hat/ helmet 5 hard hat/ helmet 5 pcs
set gloves 5 set gloves 5 sets
safety shoes 5 safety shoes 5 pairs
Safety goggles 5 Safety goggles 5 pairs
tool pouch/holster 5 tool pouch/holster 5 pcs
safety cones/other collapsible safety cones/other collapsible
3 3 sets
signs signs
rubber boots 5 rubber boots 5 pairs
Materials Materials
Item/ Description Qty Item/ Description Qty
set of suspension clamps 3 set of suspension clamps 3 sets
pole extension arm 3 pole extension arm 3 sets
cable-loop form / X-frame 5 cable-loop form / X-frame 5 sets
ground/guying insulator 5 ground/guying insulator 5 sets
pole clamps of various sizes 5 pole clamps of various sizes 5 sets
guy protector 3 guy protector 3 sets
set of guy grips 3 set of guy grips 3 sets
cable clip 5 cable clip 5 sets
lag screws 5 lag screws 5 sets
sets of washer, bolts and nuts, sets of washer, bolts and nuts,
5 5 sets
machine bolts machine bolts
stainless lashing wire 1 roll stainless lashing wire 1 roll
lashing wire clamps 10 lashing wire clamps 10 sets
screw hooks 5 screw hooks 5 sets
II B - AMENDMENT TRAINING
_ FACILITIES ITF1
ICT SECTOR
Qualification : TELECOM OSP INSTALLATION (FIBER OPTIC CABLE) NC II
Existing Amendment
3.5 TRAINING FACILITIES
Total 116
• Must be at least a graduate of BSEE/BSECE • Holder of National TVET Trainer Certificate Level
• Must be a licensed Electrical Engineer or Registered I (NTTC Level I) in Marine Electricity NC II
Electronics and Communications Engineer • Must be at least a graduate of BSEE/BSECE
• Must have at least a total of 2 years as electrical • Must be a licensed Electrical Engineer or
officer on board Registered Electronics and Communications
• Must be physically and mentally fit Engineer
_ • Must have a good moral character • Must have at least a one (1) year as electrical
• Must be good in communicating in English officer on board or one (1) YEAR AS Electrical
• Must have undergone Trainor's Training /Trainor's Engineer on a Ship Repair or Ship Construction
Methodology Course • Must be physically fit
• Must possess good communication skills
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
_MARITIME SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Description Qty Description Qty
Ship's Catering Square table 2 pcs. Square table 2 pcs.
Services NC I Dining Chairs 8 pcs. Dining Chairs 8 pcs.
Round Trays 3 pcs. Round Trays 3 pcs.
Rectangular Trays 3 pcs Rectangular Trays 3 pcs
Cloth Table napkins 6 pcs. Cloth Table napkins 6 pcs.
Table Cloth 2 pcs. Table Cloth 2 pcs.
Goblet Glass rack 1 pc Goblet Glass rack 1 pc
High ball Glass rack 1 pc. High ball Glass rack 1 pc.
Plate rack 1 pc. Plate rack 1 pc.
. Coffee Urn 1 pc. Coffee Urn 1 pc.
Cork screw 1 pc. Cork screw 1 pc.
Sugar and creamer set 1 set Sugar and creamer set 1 set
Ashtray 2 pcs. Ashtray 2 pcs.
Toothpicks dispenser 2 pcs. Toothpicks dispenser 2 pcs.
Coffee cup and saucer 6 sets Coffee cup and saucer 6 sets
Show plate 12 Show plate 12
pcs. pcs.
Salt Pepper Shaker 2 sets Salt Pepper Shaker 2 sets
Tea spoon 6 pcs. Tea spoon 6 pcs.
Dinner Spoon 6 pcs. Dinner Spoon 6 pcs.
Dinner Fork 6 pcs. Dinner Fork 6 pcs.
Bread baskets 4 pcs Bread baskets 4 pcs
Fish knife 6 pcs. Fish knife 6 pcs.
Salad knife 6 pcs. Salad knife 6 pcs.
Dinner Knife 6 pcs. Dinner Knife 6 pcs.
Butter spreader 6 pcs Butter spreader 6 pcs
Dessert spoon 6 pcs. Dessert spoon 6 pcs.
Cocktail fork 6 pcs. Cocktail fork 6 pcs.
Salad fork 6 pcs. Salad fork 6 pcs.
Demitasse spoon 2 pcs. Demitasse spoon 2 pcs.
Demitasse cup and saucer 2 sets Demitasse cup and saucer 2 sets
Dinner Plate (10") 6 pcs. Dinner Plate (10") 6 pcs.
Bread Plate 6 pcs. Bread Plate 6 pcs.
Salad Plates 6 pcs. Salad Plates _ 6 pcs.
Dessert Bowl 6 pcs. Dessert Bowl 6 pcs.
Entrée plate 6 pcs. Entrée plate 6 pcs.
Soup bowl 6 pcs. Soup bowl 6 pcs.
Soup spoon 6 pcs. Soup spoon 6 pcs.
Stainless water pitcher 3 pcs. Stainless water pitcher 3 pcs.
Water goblet 6 pcs. Water goblet 6 pcs.
Red wine glass 6 pcs. Red wine glass 6 pcs.
White wine glass 6 pcs. White wine glass 6 pcs.
High ball glass 6 pcs. High ball glass 6 pcs.
Round table 1 pc.
Rectangular table 1 pc.
Equipment Equipment
Description Qty Description Qty
3-Compartment Sink 1 unit 3-Compartment Sink 1 unit
Floor Squeegee 1 pc. Floor Squeegee 1 pc.
Detergents / cleaning agents stock 1 unit Detergents / cleaning agents 1 unit
cabinet stock cabinet
Storage cabinet 1 unit Storage cabinet 1 unit
Bed 1 unit Bed , 1 unit
Mock Bedroom 1 unit Mock Bedroom 1 unit
Vacuum Cleaner 1 unit Vacuum Cleaner 1 unit
(wet and dry) (wet and dry)
Floor Polishers 1 unit Floor Polishers 1 unit
Dryer 1 unit Dryer 1 unit
• Washing machine 1 unit Washing machine 1 unit
First Aid Kit 1 set First Aid Kit 1 set
Fire Extinguisher 1 pc. Fire Extinguisher 1 pc.
Personal Protective Equipment 1 set Personal Protective Equipment 1 set
(PPE) (PPE)
Materials Materials
Description Qty Description Qty
Hand towels 2 pcs. Hand towels 2 pcs.
Face towels 2 pcs. Face towels 2 pcs.
Hangers 6 pcs. Hangers 6 pcs.
Bath Towels 3 pcs. Bath Towels 3 pcs.
Blanket / Comforter 1 pc. Blanket / Comforter 1 pc.
Bed Sheets 3 pcs. Bed Sheets 3 pcs.
Pillows / pillow cases 2 pcs. Pillows / pillow cases 2 pcs.
Foot mat 1 pc. Foot mat . 1 pc.
Handbook for sanitation Handbook for sanitation 1 pc.
Handbook for safety Handbook for safety 1 pc.
Cleaning Procedures Manual Cleaning Procedures Manual 1 pc.
Utensils 1 set
Table cloths 1 set
Mac food 1 set
II. B — TRAINING FACILITIES (TF)
MARITIME SECTOR
Mild steel plate 10mm X 100mm X 40 pcs Carbon steel plate 38 pcs.
150mm 6mm X 100mm X 200mm
Cutting disc 3/32" x 5/8" x 4" dia. 27 pcs Cutting disc 3/32" x 5/8" x 4" dia. 27 pcs
Grinding disc 1/4" x 5/8" x 4" dia. 19 pcs. Grinding disc 1/4" x 5/8" x 4" dia. 19 pcs.
Shielding gas (75% argon 25% CO2 5 cyl. Shielding gas (75% argon 25% CO2 5 cyl.
Oxygen 1 cyl. Oxygen 1 cyl.
LPG or Acetylene 1 cyl. LPG or Acetylene 1 cyl.
Dark glass 3 pcs. Dark glass lens 3 pcs.
Lens clear glass 46 pcs. Clear glass lens 46 pcs.
Metal marker 1 tube Softstone / Chalk Marker 2 pcs
Total 108
Circulation Area" 32
The vrelding v.orkshop must be of concrete structure. Based on class size of 2! The welding workshop must be of concrete structure. Based on class size of
stud entsltraineesth e space requirements fortheteachingAearning and circulation area 20 students/trainees the space requirements for the teaching/learning and
are as follow: circulation areas are as follows:
• Must be a holder of FCAW NC III • Holder of National TVET Trainer Certificate Level I
(NTTC Level I) in Flux Cored Arc Welding NC III
• Must have completed training in SMAW NC III and NC IV • Must be physically fit (including differently-abled
person)
• Must have undergone training on Training Methodology I
• Must have at least 2 years welding job/ industry/
(TM l)
teaching experience with at least 16 hours training in
• Must be physically and mentally fit supervisory development course
• Must be a holder of GMAW Welder NC I • Holder of National TVET Trainer Certificate Level I
(NTTC Level I) in Gas Metal Arc Welding (GMAW) NC II
• Must have undergone training on Training Methodology I or higher
(TM I) • Must be physically fit (including differently-abled person)
• Must have at least 2 years welding job/industry/ teaching
• Must be physically and mentally fit
experience
• *Must have at least 2 years job/industry experience
. Grinding disc 1/4" x 5/8" x 4" dia. 19 pcs. Grinding disc 1/4" x 5/8" x 4" dia. 19 pcs.
CO2 5 cyl. CO2 5 cyl.
oxygen 1 cyl. oxygen 1 cyl.
LPG / Acetylene 1 cyl. Fuel Gas (Acytelene/LPG) 1 cyl.
Metal marker 1 tube Softstone / Chalk Marker 2 pcs.
II. B — TRAINING FACILITIES (TF)
METALS AND ENGINEERING SECTOR
Qualification : Gas Metal Arc Welding (GMAW) NC II
Existing Amendment
• Must be a holder of GMAW Welder NC II • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology II (NTTC Level I) in Gas Metal Arc Welding (GMAW) NC
(TM II) II or higher
• Must be physically and mentally fit • Must be physically fit (including differently-abled
• *Must have at least 2 years job/industry experience person)
• Must be a civil service eligible (for government position or • Must have at least 2 years welding job/industry/
appropriate professional license issued by the Professional teaching experience
. Regulatory Commission)
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
METALS AND ENGINEERING SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Description Qty. Description Qty.
Gas Metal Arc Chipping Hammer 25 Chipping Hammer 25 pcs.
Welding (GMAW) pcs.
NC III Steel brush 75 Steel brush 75 pcs.
pcs.
Plier/tongs 12 Stainless / chrome or nickel plated Pliers/ 12 pcs.
pcs. tongs
Files-bastard cut 20 Files-bastard cut 20 pcs.
pcs.
Welding Mask 25 Welding Mask 25 pcs.
pcs.
Leather apron/jacket 25 Leather apron/jacket 25 sets
sets
Leather gloves, long 50 Leather gloves, long 50 sets
sets
Safety goggles, wide vision, clear 5 pcs. Safety goggles, wide vision, clear 5 pcs.
Oxy-acetylene goggles 5 pcs. Oxy-acetylene goggles 5 pcs.
Try square 300 mm. long 12 Try square 300 mm. long 12 pcs.
pcs.
Steel square 300 mm. long 12 Steel square 300 mm. long 12 pcs.
pcs.
Files-half round 12 Files-half round 12 pcs.
pcs.
Fillet gauge 5 pcs. Welding gauges 5 pcs.
Wire Cutter 1 pc. Stainless / chrome or nickel plated Wire 1 pc.
Cutter
Hand Hacksaw 1 pc. Hand Hacksaw 1 pc.
Respirator (as per NIOSH) 60 pcs
Safety Shoes (High-cut) 20 prs
Adjustable wrench 12 inch 10 pcs
C- Clamps (8inch) 10 pcs
Clamp Ammeter (Optional) 1 unit
Spirit Level 5 unit
Equipment Equipment
Description Qty. Description Qty.
GMAW/Mig Welding machine, Mig 12 GMAW machine, 30v, 250-300 Amps. 12 units
gun and accessories units and accessories
. Welding positioners 12 Welding table with welding positioners 12 pcs.
pcs.
Portable disc grinder 12 Portable disc grinder 12 units
units
Exhaust fan 1 unit Ventilation System 1 set
Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 corners 2 units
corners
Oxy-acetylene/Oxy-LPG cutting outfit 2 sets Oxy-acetylene/Oxy-LPG cutting outfit 2 sets
Pedestal /bench grinding machine 1 unit Pedestal /bench grinding machine 1 unit
Industrial fan 1 unit Industrial fan 1 unit
Plasma cutting machine with complete 2 sets
accessories
Fire Extinguishers 4 Units
Waste Bins 3 units
Scrap Bin 1 Unit
Liquid Penetrant Test (PT) kit 2 sets
Mechanical Press (break/bend test) 1 Unit
Plate and pipe beveling cutting equipment 1 unit
(Mechanical or Automatic)
Materials Materials
Description Qty. Description Qty.
Mig wire, ER309 1 reel Electrodes 0.8-1..2mm dia. (ER308L) 2 kgs.
Mild steel plate 3.2mm X 50mm X 38 ---
150mm pcs.
Mild steel plate 10mm X 100mm X 40 pcs Austenitic Stainless plate 10mm x 150mm 40 pcs.
150mm x 200mm
6" dia. Sch. 40 A-53 Gr. B 21 prs Austenitic Stainless pipe, 42 pcs.
(or 1000mm. x 125mm (sch. 40 )
equiv
jts)
Cutting disc 3/32" x 5/8" x 4" dia. 38 Stainless Cutting disc 3/32" X 5/8" X 4" 38 pcs.
pcs.
Grinding disc 1/4" x 5/8" x 4" dia. 19 Stainless Grinding disc 1/4" X 5/8" X 4" 19 pcs.
pcs.
CO2 5 cyl. CO2 5 cyl.
oxygen 1 cyl. oxygen 1 cyl.
• LPG / Acetylene 1 cyl. LPG / Acetylene 1 6y1.
Dark glass 3 pcs. Dark glass lens 3 pcs
Lens clear glass 46 Clear glass lens 46 pcs.
pcs.
Metal chalk 10 Softstone / Chalk Marker 10 pcs.
pcs.
II. B — TRAINING FACILITIES (TF)
METALS AND ENGINEERING SECTOR
Qualification : Gas Metal Arc Welding (GMAW) NC III
Existing Amendment
• Must be a holder of GMAW NC Ill • Holder of National TVET Trainer Certificate Level I
• Must have completed training in SMAW NC Ill (NTTC Level I) in Gas Metal Arc Welding (GMAW) NC Ill
• Must have undergone training on Training Methodology Ill • Must be physically fit (including differently-abled person)
(TM Ill) • Must have at least 2 years welding job/ industry/
• Must be physically and mentally fit teaching experience with at least 16 hours training in
• *Must have at least 2 years job/industry experience supervisory development course
• Must be a civil service eligible (for government position or
appropriate professional license issued by the
Professional Regulatory Commission)
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
METALS AND ENGINEERING SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Description Qty. Description Qty.
Gas Tungsten Arc Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
Welding (GTAW) Steel brush 50 pcs. Steel brush 50 pcs.
NC II Plier/tongs 12 pcs. Plier/tongs 12 pcs.
• Files-bastard cut 20 pcs. Files-bastard cut 20 pcs.
Welding Mask 25 pcs. Welding Mask 25 pcs.
Leather apron/jacket 25 sets Leather apron/jacket 25 sets
Leather gloves, long 25 sets Welding gloves(long) 25 sets
Safety goggles, wide vision, clear 5 pcs. Safety goggles, wide vision, clear 5 pcs.
Oxy-acetylene goggles 5 pcs Oxy-acetylene goggles 5 pcs
Try square 300 mm. long 12 pcs. Try square 300 mm. long 12 pcs.
Steel square 300 mm. long 12 pcs. Steel square 300 mm. long 12 pcs.
Files-half round 12 pcs. Files-half round 12 pcs.
Fillet gauge 5 pcs. Welding gauges 5 pcs.
Hand Hacksaw 5 pcs. Hand Hacksaw 5 pcs.
Respirator (as per NIOSH) 60 pcs.
Safety Shoes (High-cut) 20 prs.
Adjustable wrench 12 inch 10 pcs.
C- Clamps (8inch) 10 pcs.
Clamp Ammeter (Optional) 1 unit
Equipment Equipment
Description Qty. Description Qty.
• GTAW Welding machine and 12 units GTAW machine AC/DC 250- 12 units
accessories* 300amps and accessories
Welding positioners 12 pcs. Welding table with welding 12 pcs.
positioners
Portable disc grinder 12 units Portable disc grinder 12 units
Exhaust fan 1 unit Ventilation System 1 set
Work bench w/ bench vice on 4 corners 2 units Work bench w/ bench vice on 4 2 units
corners
Pedestal /bench grinding machine 1 unit Pedestal /bench grinding machine 1 unit
Industrial fan 1 unit Industrial fan 1 unit
Oxy-fuel cutting outfit with trolley 2 sets
Fire Extinguishers 4 Units
Waste Bins 3 units
Scrap Bin 1 Unit
Broom and dustpans 10 sets
Liquid Penetrant Test (PT) kit 2 sets
Vernier Caliper 5 unit
Spirit Level 5 unit
Plate and pipe beveling cutting 1 unit
equipment .
(Mechanical or Automatic)
Materials Materials
Description Qty. Description Qty.
Filler wire, 1.6 or 2.4mm dia. 250 kls. Filler Rod, ER70S-6, 1.6-2.4mm 250 kis,
dia. x 1000mm
Mild steel flat bar 3.2mm x 50mm x 6m 25pcs. Carbon steel plate 3mm x 150mm x 25pcs.
200mm
Mild steel flat bar 6mm x 50mm x 6m 25pcs. Carbon steel plate 6mm x 150mm x 25pcs.
200mm
Carbon steel pipe, 50mm dia. x 6m, 25 pcs. Carbon steel pipe, 25 pcs.
, schedule 40 150o mm. x 125mm (sch. 40 )
Argon gas 5 cyl. Argon gas 5 cyl.
Dark glass 1 pc. Dark glass #12 1 pc.
Lens clear glass 14 pcs. Clear glass 14 pcs.
Cutting disc 3/32" x 5/8" x 4" dia. 10pcs Cutting disc 3/32" x 5/8" x 4" dia. 10pcs
Grinding disc 1/4" x 5/8" x 4" dia. 20 pcs. Grinding disc 1/4" x 5/8" x 4" dia. 20 pcs.
Metal marker 1 tube Softstone / Chalk Marker 2 pcs.
Tungsten Electrode 2.4 mm 10pcs. Tungsten Electrode, EWTh-2, 2.4 10pcs.
mm dia.
• Must be a holder of GTAW Welder NC II • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology II (NTTC Level I) in Gas Tungsten Arc Welding (GTAW)
(TM II) NC II or higher
• Must be physically and mentally fit • Must be physically fit (including differently-abled person)
• *Must have at least 2 years job/industry experience • Must have at least 2 years welding job/industry/ teaching
• Must be a civil service eligible (for government position experience
or appropriate professional license issued by the
Professional Regulatory Commission)
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
METALS AND ENGINEERING SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Description Qty. Description Qty.
Gas Tungsten Arc Chipping Hammer 25 pcs. Stainless Chipping Hammer 25 pcs.
Welding (GTAW) Steel brush 50 pcs. Stainless Steel brush 50 pcs.
NC IV Plier/tongs 12 pcs. Stainless / chrome or nickel plated Pliers/ 12 pcs.
tongs
Files-bastard cut 20 pcs. Files-bastard cut • 20 pcs.
Welding Mask 25 pcs. Welding Mask 25 pcs.
Leather apron/jacket 25 sets Leather apron/jacket 25 sets
Leather gloves, long 25 sets Welding gloves (long) 25 sets
Safety goggles, wide vision, clear 5 pcs. Safety goggles, wide vision, clear 5 pcs.
Oxy-acetylene goggles 5 pcs Safety Goggles 5 pcs
Try square 300 mm. long 12 pcs. Try square 300 mm. long 12 pcs.
Steel square 300 mm. long 12 pcs. Steel square 300 mm. long 12 pcs.
Files-half round 12 pcs. Files-half round 12 pcs.
Fillet gauge 5 pcs. Welding gauges 5 pcs.
Hand Hacksaw 5 pcs. Hand Hacksaw 5 pcs.
Respirator (as per NIOSH) 60 pcs
Safety Shoes (High-cut) 20 prs
Adjustable wrench 12 inch 10 pcs
C- Clamps (8inch) 10 pcs
Clamp Ammeter (Optional) 1 unit
Spirit Level 5 unit
Equipment Equipment
Description Qty. Description Qty.
GTAW Welding machine and 12 units GTAW machine AC/DC 250-300 Amps. 12 units
accessories* and accessories
Welding positioners 12 pcs. Welding table with welding positioners 12 pcs.
Portable disc grinder 12 units Portable disc grinder 10 units
Exhaust fan 1 unit Ventilation System 1 set
Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 corners 2 units
• corners
Pedestal /bench grinding machine 1 unit Pedestal /bench grinding machine 1 unit
Industrial fan 1 unit Industrial fan 1 unit
Plasma cutting machine with complete 2 sets
accessories
Fire Extinguishers 4 Units
Waste Bins 3 units
Scrap Bin 1 Unit
Liquid Penetrant Test (PT) kit 2 sets
Mechanical Press (break/bend test) 1 Unit
Plate and pipe beveling cutting 1 unit
equipment
(Mechanical or Automatic)
Materials Materials
Description Qty. Description Qty.
Filler rod, 5 kls. Filler rod, ER308L 1.6-2.4 dia. x 1000mm 5 kls.
ER308 or 309 1.6 or 2.4mm dia.
Mild steel flat bar 3.2mm x 50mm x 24 pcs. Austenitic Stainless plate 3mm x 50mm x 24 pcs.
150mm 150mm
Mild steel flat bar 6mm x 100mm x 24 pcs. Austenitic Stainless plate 6mm x 100mm 24 pcs.
150mm x 150mm
Carbon steel pipe, 20 pcs. Austenitic Stainless pipe, 20 pep.
50mm dia. x 150mm, schedule 40 50mm dia. x 150mm, schedule 40
Argon gas 5 cyl. Argon gas 5 cyl.
Dark glass 1 pc. Dark glass lens 1 pc.
Lens clear glass 14 pcs. Clear glass lens 14 pcs.
Cutting disc 3/32" x 5/8" x 4" dia. 15 pcs Stainless Cutting disc 3/32" X 5/8" X 4" 15 pcs.
Grinding disc 1/4" x 5/8" x 4" dia. 15 pcs. Stainless Grinding disc 1/4" X 5/8" X 4" 15 pcs
Metal marker 1 tube Softstone / Chalk Marker 2 pcs.
Tungsten Electrode 2.4 mm 10pcs. Tungsten Electrode, EWTh-2, 2.4 mm 10pcs.
dia.
II. B — TRAINING FACILITIES (TF)
METALS AND ENGINEERING SECTOR
Qualification : Gas Tungsten Arc Welding (GT AW) NC IV
Existing Amendment
TEACHINEEARNING SIZE IN AREA IN QTY TOTAL AREA The welding workshop must be of concrete structure. Based on crass size of
AREAS METERS SO. IN SO.. 20 students/trainees the space requirements for the teaching/learning and
METERS METERS circulation areas are as follows:
Welding Booth 2 X 1.5 3 5 15 SPACE REQUIREMENT SIZE IN AREA IN SQ. QTY. TOTAL AREA IN
METE RS METE RS SO. METERS
Grinding Booth* 2 X 1.5 3 2 6 Contextual Leamirg 3 .:. 4 12 1 12
Area
(Lecture Room)
Materials/Preparation 2X2 4 4
Distance Learning 56 56
Area' (LaboratorytNorkshop/
Activity area)
Bench work Area? 1.5 X 2.5 4 2 8 - Welding Booth* 2 X 1.5=3 30 '0 30
3 x 10 booths
Tool Room & S/M 4X5 20 2] - Grinding Booth* 2 X 1.6 3 2 6
Storage Area*
- Maierials/Preparat 2 X 2.5 5 2 10
ion Area *
Learning Resource 5X9 45 45
- Bench work Area' 2 X 2.5 5 2 10
Area'
Storage Area (Tool room 4X5 20 1 20 •
Wash Area /Comfort 25X4 10 10 &S/N1 storage area)
Room (inak &temafe)t Learning Resource 5X7 35 1 35
Area*
TotA 108 Wash Area /Comfort 2.5 X 4 10 1 10
Room (maie&fema0
Circulation Area" (21.3)
Circulation Area" 32
• Must be a holder of GAS WELDING NC I • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology I (TM (NTTC Level I) in Gas Welding NC II
I) • Must be physically fit (including differently-abled
• Must be physically and mentally fit person)
• *Must have at least 2 years job/industry experience • Must have at least 2 years welding job/industry/
• Must be a civil service eligible (for government position or teaching experience
appropriate professional license issued by the Professional
Regulatory Commission)
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
METALS AND ENGINEERING SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Description Qty. Description Qty.
Gas Welding) NC II Chipping Hammer 25 pcs. Stainless Chipping Hammer 25 pcs.
Steel brush 75 pcs. Stainless Steel brush 75 pcs.
Plier/tongs 12 pcs. Stainless / chrome or nickel plated Pliers/ 12 pcs.
tongs
Files-bastard cut 20 pcs. Files-bastard cut 20 pcs.
Welding goggles (swivel) 5 pcs. Welding goggles (swivel) 5 pcs.
Leather apron/jacket 25 sets Leather apron/jacket 25 sets
Safety goggles, wide vision, clear 5 pcs. Safety goggles, wide vision, clear 5 pcs.
Oxy-acetylene Goggles 5 pcs. Oxy-acetylene Goggles 5 pcs.
Try square 300 mm. long 12 pcs. Try square 300 mm. long 12 pcs.
Steel square 300 mm. long 12 pcs. Steel square 300 mm. long 12 pcs.
Files-half round 1 pc. Files-half round 1 pc.
Fillet gauge 1 pc. Welding gauges 1 pc.
Wire Cutter 1 pc. Stainless / chrome or nickel plated Wire 1 pc.
Cutter
Hand Hacksaw 1 pc. Hand Hacksaw 1 pc.
Respirator (as per NIOSH) 60 pcs.
Safety Shoes (High-cut) 20 prs.
Adjustable wrench 12 inch .10 pcs.
C- Clamps (8inch) . 10 pcs.
Clamp Ammeter (Optional) 1 unit
Equipment Equipment
Description Qty. Description Qty.
GAS Welding/cutting outfit * 12 units Oxy-fuel Welding/cutting outfit 12
units
Welding positioners 12 pcs. Welding table with welding positioners 12 pcs.
Portable disc grinder 12 units Portable disc grinder 12
units
Exhaust fan 1 unit Ventilation System . 1 set
Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 corners 2 units
corners
Industrial fan 1 unit Industrial fan 1 unit
LPG / acetylene 1 cyl. Oxy-fuel cutting outfit with trolley 2 sets
Oxygen 1 cyl. Oxygen 1 cyl.
Pedestal /bench grinding machine 2 units
Fire Extinguishers 4 Units
. Waste Bins 3 units
Scrap Bin ,1 Unit
Broom and dustpans 10 sets
Liquid Penetrant Test (PT) kit 2 sets
Vernier Caliper 5 unit
Spirit Level 5 unit
Plate and pipe beveling cutting 1 unit
equipment
(Mechanical or Automatic)
Materials Materials
Description Qty. Description Qty
Filler (alloy) rod 1.6/2.4 5 kgs Filler rod (alloy steel), 1.6 or 2.4 mm dia. 5 kgs
mm dia.
Mild steel sheet 3.2mm X 150mm x 12 pcs. Alloy steel plate 3.2mm X 150mm x 12 pcs.
200mm (equiv to 200mm (equiv
20 jts) to 20
jts)
Mild steel sheet 2.4mm X 150mm X 12 pcs. Alloy steel plate 2.4mm X 150mm X 12 pcs.
200mm (equiv to 200mm (equiv
20 jts) to 20
jts)
Carbon steel pipe, schedule 40 75 22 pcs. Alloy steel pipe, schedule 40 75 mm dia. 22 pcs.
mm dia. X 150mm (equiv to X 150mm (equiv
45 jts) to 45
jts)
Dark glass 3 pcs. Dark glass #8 3 pcs.
Lens clear glass 46 pcs. Clear glass 25 pcs.
Cut off disc 3/32" x 5/8" x4" dia. 38 pcs Cut off disc 3/32" x 5/8" x4" dia. 38 pcs
Metal marker 1 tube Softstone / Chalk Marker 2 pcs.
II. B — TRAINING FACILITIES (TF)
METALS AND ENGINEERING SECTOR
Qualification : Gas Welding NC II
Existing Amendment
• Must be a holder of GAS WELDING II • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology II (NTTC Level I) in Gas Welding NC II
(TM II) • Must be physically fit (including differently-abled
• Must be physically and mentally fit person)
• *Must have at least 2 years job/industry experience • Must have at least 2 years welding job/industry/
• Must be a civil service eligible (for government position or teaching experience
appropriate professional license issued by the Professional
Regulatory Commission)
II. A — LIST OF TOOLS, EQUIPMENT AND MATERIALS
METALS AND ENGINEERING SECTOR
Qualification Existing TEM Amended TEM
Tools Tools
Submerged Arc Description Qty Description Qty
Welding (SAW) NC I Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
Steel brush 75 pcs. Steel brush 75 pcs.
Flash shield 25 pcs. Flash shield 25 pcs.
Working clothes/ overall 25 sets Working clothes/ overall 25 sets
Leather gloves, long 50 sets Leather gloves, long 50 sets
Steel square 300 mm. long 12 pcs. Steel square 300 mm. long 12 pcs.
Files-half round 12 pcs. Files-half round 12 pcs.
Fillet gauge 5 pcs. Welding gauges 5 pcs.
Plier/tongs 20 prs.
Safety goggles, wide vision, clear 20 prs.
Steel rule300mm. long 20 pcs.
Respirator (as per NIOSH) 60 pcs
Safety Shoes (High-cut) 20 prs
Adjustable wrench 12 inch 10 pcs
C- Clamps (8inch) 10 pcs
Clamp Ammeter (Optional) 1 unit
Equipment Equipment
Description Qty Description Qty
SAW machine AC/DC and 12 units SAW machine AC/DC and accessories 12
accessories units
Welding positioners 12 pcs. Welding table with welding positioners 10pcs.
Automatic gas cutting machine 1 unit Automatic gas cutting machine 1 unit
Flux oven 1 unit Flux oven 1 unit
Portable disc grinder 12 units Portable disc grinder 12
units
Exhaust fan 1 unit Ventilation System 1 set
Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 corners 2 units
corners
Industrial fan 2 units
Oxy-fuel cutting outfit 2 sets
Pedestal /bench grinding machine 2 units
Fire Extinguishers 4 Units
Waste Bins 3 units
. Scrap Bin 1 Unit
Liquid Penetrant Test (PT) kit 2 sets
Mechanical Press (break/bend test) 1 Unit
Plate and pipe beveling cutting 1 unit
equipment
(Mechanical or Automatic)
Materials Materials
Description Qty Description Qty
Mild steel plate 10mm X 150mm X 10 pcs. Carbon steel plate 10mm X 150mm X 10 pcs.
500mm 500mm
Mild steel plate 12 mm X 150mm X 20 pcs. Carbon steel plate 12mm X 100mm X 20 pcs.
500mm 500mm
Metal marker 1 tube Softstone / Chalk Marker 2 pcs
Filler wire 2.4 / 3.2 mm dia. EL8, 1 reel Filler wire 2.4 / 3.2 mm dia. EL8, EM12, 1 reel
EM12, or EH14 or EH14
F6A0 or F7A0 1 bag F6A0 or F7A0 1 bag
3.2mm0 electrode for tacking 1 kg 3.2mm0 electrode for tacking (E60XX/ 1 kg
(E60XX/ E70XX) E70XX)
Dark glass lens 3 pcs
Clear glass lens 25 pcs
lajmujjn,FACILITIES
Space Size in Area in Oty. Total
SUBMERGED ARC VELDING — NC I Requirement Meters Sq. M. Area in
The welding workshop must be of concrete structure. Based on class size of 25
Sq. M.
studentsitraineesthe space requirementsfor the teaching/learning and circulation Welding Area 2x3 6 5 30
areas are as follows: Materials/ 2x2 4 5 •.)Li
Prep a ration
SPACE SIZE IN AREA IN TOTAL AREA Area
REQUIREMENT METERS SQ. M QTY. IN SO. M
Bench work 1.5 x 2.5 3.75 2 7.5
Welding Area 2 .:. .:. 2 4 5 al Area
Tool Room & 4x5 20 ?1:1
Materials/Preparation 2:.•:: 2 4 4
Area* Silvl Storage
Area
Bench work Area 1.5 X 2.5 4 2 LI
Learning 5x9 45 45
Tool Room&S/M 4X5 20 20 Resource
Storage Area Area
Learning Resource 5 X9 45 45 Wash Area/ 2.5 x 4 10 10
Area* Ocinfort
Wash Area /Comfort 2.5 X 4 10 10 P o o rn
Room (male and Total 132.5
female)* -71,i:
Circulation .jJ
Required traning fauties for training instrution that will offer Slaughtering Required truing fabitties for training institution that will ofer Slaughtering
Operations (Large Animal) NC II based on a class intake of 15 studentsilrainees Operations (Large Animal) NC II based on a class intake d 15 studentsftainees
Note:
• Class "AA" slaughterhouse will be required
as a minimum requirement for training. This has
facilities and operational procedures sufficiently
adequate that the livestock slaughtered therein are
suitable for sale in any market domestic.
• Class "AAA" slaughterhouse will be required as a
minimum requirement for training. This has
facilities and operational procedures sufficiently
adequate that the livestock slaughtered therein are
suitable for sale in any market international.
•
Required training faciities for training institution that will offer Slaughtering Required training faciities for training instrution that will offer Slaughtering
Operations (Large Animal) NC II based on a class intake of 15 studentaainees. Operations (Large Animal) NC II based on a dass intake o(15 studentsitainees.
Note:
• Class "AA" slaughterhouse will be required as
a minimum requirement for training. This has
. facilities and operational procedures sufficiently
adequate that the livestock slaughtered therein are
suitable for sale in any market domestic.
• Class "AAA" slaughterhouse will be required as a
. minimum requirement for training. This has facilities
and operational procedures sufficiently adequate
that the livestock slaughtered therein are suitable for
sale in any market international.
*Optional
II. A - LIST OF TOOLS, EQUIPMENT AND MATERIALS
Qualification Existing TEM Amendment TEM
Tools Tools
Bookkeeping NC III Description Qty Description Qty
Stapler 1 pc. Stapler 1 pc.
Calculators 25 pcs Calculators 25 pcs
Equipment Equipment
Description Qty Description Qty
Computer/Laptop 1 unit Computer/Laptop 1 unit
Aircon unit 1 unit Aircon unit 1 unit
LCD Projector 1 unit LCD Projector 1 unit
Teacher's Table/Chair 1 unit Teacher's Table/Chair 1 unit
Arm Chairs 25 pcs. Armed Chairs 25 pcs
White Board 1 pc. White Board or Document reader 1 pc.
Materials Materials
Description Qty Description Qty
Pencils 25 pcs. Pencil 25 pcs.
Pencil Erasers 25 pcs. Pencil Eraser 25 pcs.
Ballpens 25 pcs. Ballpen 25 pcs.
Ruler 25 pcs. Ruler 25 pcs.
Journals (assorted columns) 25 pcs. Journal (assorted columns) 25 pcs.
Ledger 25 pcs. Ledger 25 pcs.
Worksheets (assorted) 25 pcs. Worksheets (assorted) 50 pcs.
Acetate 1 box Marker 3 pcs.
Marker 3 pcs. Envelope (Long) 25 pcs.
Diskettes/CD Registration Form 25 pcs.
Envelopes (Long) 25 pcs. Teacher's Record Book 1 pc.
Registration Forms 25 pcs. Ledger Book 25 pcs.
Teacher's Record Book 1 pc. Staple Wire 1 box
Worksheets (Asstd.) 50 pcs Flash drive 1 pc
Marker Ink 1 pc.
Ledger Book 25 pcs.
Staple Wire 1 box
II. B - TRAINING FACILITIES (TF)
SOCIAL AND OTHER COMMUNITY DEVELOPMENT SECTOR
Qualification: BOOKKEEPING NC III
Existing Amendment
3.5 TRAINING FACILITIES'
Note:
Learning Resource
3 x 5 m. 15 sq. m. 15 sq. m.
Center No Amendment
Facilities/Equipment/
24 sq. m.
Circulation Area
Total workshop area: 104 sq. m.
BARISTA NC II
Lecture/Laboratory Area 5 x 10 50 50
Wash Room 2 x5 10 10
Laboratory 8 x 5 m. 40 sq. m 40 sq m.
Learning Resource
No Amendment
3 x 5 m_ 15 sq m 15 sq. m.
Center
Facilities' Equipment.'
36 sq. m.
Circulation Area
Total workshop area: 156 sq. m. +40sq.m.
HOUSEKEEPING NC II
Lecture 8 x 5 m. 40 sq m 40 sq. m.
Learning Resource
Center
3x5m. 15 sq. m. 15 sq. m. No Amendment
Facilities/Equipment,
24 sq. m.
Circulation Area
Materials
Item/ Description Qty Item/ Description Qty
Assorted abrasive paper 40 pcs Assorted abrasive paper 40 pcs
Automotive wire #14 2m Automotive wire #14 2m
Automotive wire #18 2m Automotive wire #18 2m
Automotive wire, no. 12 AWG 10 m Automotive wire, no. 12 AWG 10 m
Bearing 1 pc Bearing 1 pc
Brush 2", 3", 4" 9 pcs Brush 2", 3", 4" 9 pcs
Cable ties Assorted 2 Cable ties Assorted 2
boxes boxes
Carbon remover 1 pail Carbon remover 1 pail
Contact cleaner 16oz 3 cans Contact cleaner 16oz 3 cans
Coolant 40 Its Coolant 40 Its
Cotton tapes 3 rolls Cotton tapes 3 rolls
Degreaser 1 gal Degreaser 1 gal
Descaler 1 pail Descaler 1 pail
Diesel fuel 124 L Diesel fuel 124 L
Dye penetrant and developer 4 set Dye penetrant and developer 4 set
Electrical enamel 8 Itrs Electrical enamel 8 Its
Foam 1 roll Foam 1 roll
Electrical tapes 16 rolls Electrical tapes 16 rolls
Gasket 6 sheet Gasket 6 sheet
Grease and degreasers 4 packs Grease and degreasers 4 packs
Grinding compound (fine and 3 sets Grinding compound (fine and 3 sets
coarse) coarse)
Grinding sticks 15 pcs Grinding sticks 15 pcs
Hi temp grease 2 kgs Hi temp grease 2 kgs
Insulating varnish 20 Itrs Insulating varnish 20 Itrs
Log sheet/ Log book and 1 set Log sheet/ Log book and writing 1 set
writing tools tools
Forms and writing materials 1 set Forms and writing materials 1 set
Lube oil 124 L Lube oil 124 L
Manuals, Drawings and 1 set Manuals, Drawings and Diagrams 1 set
Diagrams
Metal marker 1 pc Metal marker 1 pc
Nylon Rope or sling 2m Nylon Rope or sling 2m
0-rings 1 kit 0-rings 1 kit
Penetrating oil 3 cans Penetrating oil 3 cans
Plastic gauge 1set Plastic gauge 1set
Rags 40 kg Rags 40 kg
Replacement components 1 lot Replacement components 1 lot
(assorted) (assorted)
Rubber tapes 10 rolls Rubber tapes 10 rolls
Rust converter 1 pail Rust converter 1 pail
Safety Solvent 20 ltrs Safety Solvent 20 ltrs
Scrubbing pad 2 pcs Scrubbing pad 2 pcs
Silicon gasket maker 5 pcs Silicon gasket maker 5 pcs
Soldering lead 1 roll Soldering lead 1 roll
Spaghetti tube, 10 mm 5m Spaghetti tube, 10 mm 5m
Steel brush 5 pcs Steel brush 5 pcs
System diagrams and service 1 set System diagrams and service 1 set
manuals manuals
Terminal lugs assorted 2 Terminal lugs assorted 2
boxes boxes
Terminal lugs, 1/2" dia, 20 pcs Terminal lugs, 1/2" dia, 20 pcs
Thread sealant 2 tubes Thread sealant 2 tubes
Repair kits for 1 set Repair kits for 1 set
- Turbo charger - Turbo charger
- Water pump - Water pump
- Primary fuel filter - Primary fuel filter
Wire marker 1 kit Wire marker 1 kit
Wiring diagrams and service 1 set Wiring diagrams and service 1 set
manuals manuals
Brochures/Catalogs 1 lot Brochures/Catalogs 1 lot
Reference materials 1 lot Reference materials 1 lot
II. B - TRAINING FACILITIES (TF)
UTILITIES — POWER RELATED SECTOR
Qualification : DIESEL POWER PLANT MAINTENANCE NC III
Existing Amendment
The workshop must be made of reinforced concrete or steel structure. The size
must be suited on the requirements of the competencies The facility should
accommodate a 1713XiMirl of 2C studentsttainees. NO AMENDMENTS
AREA IN SQ. TOTAL AREA IN
SPACE REQUIREMENT SIZE IN PETERS •
'ETERS SQ. !ETERS
Workshop Component Areas
• l.aboratory.Worksnop - - 100.00
Area
• Lecture Room 6 00 x 5 0: 3: DC 30 00
• Tool. Supply & Storage 4.0C X 5 DC 20.00 20.00
Room
• Learning Resource 400 x 500 20.00 20.00
Center
• Wash Room and Toilet 2.0 X 5.0C 10.00 10.00
Tote! .'Workshop Component) 180.00
• Circulation Area 130% of Workshop Component Space 1 54.00
Grand Total (Building Space) 234.00
Note. The evhes r the see an MIFF COION1 are mconmenoattors ari. , Me grax) zstao !tximirc
space„ 's me mrtrvor space mg:re:rev hp,reg.skahcr
The workshob must be made of reinforced concrete or steel structure The size
must be suited on the requirements of the corrpetencies The facility should
accommodate a maximum of 20 stuclentslainees.
The won:shop must be made of reinforced concrete or steel structure The size
must be sued on the requirements of the competencies The facility srauld
accommodate a maximum of 20 slucientslainees.