Professional Documents
Culture Documents
Concrete-Setting-Time Test ISET Sax
Concrete-Setting-Time Test ISET Sax
Serial No. :
Page 1 of 1
TEST REPORT
Tested at : Heigh Institue of technologicals studies Client : L2MGC
in Sfax Tel:
Loboratorie of civil engeneer
500.00
Hours Minutes 0.00
Initial Setting Time at 500 Psi 7 28 0 100 200 300 400 500 600
Elapsed time, min
Final Setting Time at 4000 Psi 9 42
Remarks : 1- The setting time was calculated with respect to the above data plotted in the graph.
2- The concrete mix details was provided by the customer.
3- The test was done at the Loboratorie of civil engeneer in Heigh Institue of technologicals studies of Sfax
The results of this test are not to be used for advertisement purposes.
Note: Conversion Factor for 1 lbf = 4.448 N
Diameter of Pin (Actual Measure) = 4.45 mm
Area of Pin = 15.55(sq.mm)
Stress = F / A (Mpa)
Stress = lbf x 4.448 N
15.55 sq.mm