Professional Documents
Culture Documents
Dra150s Dra 150X Engineering Drawing 1 Assignment 18
Dra150s Dra 150X Engineering Drawing 1 Assignment 18
ASSIGNMENT NO. 18
QUESTION 1
Figure 1 below shows a reinforced concrete floor layout for a multi‐storey building. You
are required to detail and schedule the 350 x 600 continuous beam on grid line 2. Use a
horizontal scale of 1:50 and a vertical scale of 1:20 for the elevation and a scale of 1:10
for the section. Remember to indicate on the
elevation where the section is taken.
FIGURE 1
Figure 2 below shows the reinforcement as designed by the structural engineer. Please
also take note of the following:
FIGURE 2
DUE DATE:
A1DCIV 2023 Friday 31 OCTOBER 2023 AT 12H30
A1DXCIV 2023 Friday 31 OCTOBER 2023 AT 12H30
B1DXCIV 2023 FRIDAY 31 OCTOBER 2022 AT 12H30