Professional Documents
Culture Documents
2Φ20 (As1)
2Φ20 (As2)
2Φ20 (As3)
Figure 1: Question 1
2. A slender rectangular column 350x450mm has an unsupported length of 6m. It is
assumed that both ends of column restrained against rotation only so that effective length
may be taken approximately about 1.2 times unsupported length of column. Determine
the required longitudinal reinforcement if column has to carry a factored compressive
load of 375kN and factored moment of 50kN-m about the major axis by using
i. Nominal curvature
ii. Nominal stiffness.
3. For the planar frame shown in Figure 2. Design Column AB. Please refer the tables
below, for material property, dimension and load type.
Note :
Use pattern loading for the design of Column AB.
All dimensions are in mm unless specified
Floor type Dead Load (Gk)- KN/m Live Load (Qk)- KN/m
Ground Floor 13 10
First Floor 75 30
Roof 50 5
Figure 2:Question 3
4. Design a short column with unsupported length of 3.25 m and subjected to biaxial bending
for the following data : Effective lengths, Lez = 3m and Ley = 2.75m, size of column = 300
mm x350 mm, factored axial load, NED = 2200 kN, and factored moments, Muz =75 kNm
and Muy = 80kNm shown on figure 3. Assume C-30 concrete & S-415 steel. Use one of
biaxial charts if necessary.
Figure 3:Question 3
This Assignment is due by 8:00Am on Thursday, MAY 5, 2022
HWRE 3RD Year APRIL 18,2022
2