Professional Documents
Culture Documents
CROWDERSUPPLY.COM
Gas Powered
Breakers/Drills
Jack Leg Drills
Compressors
Drill Steel Chicago Pneumatic
Tools for: Authorized Distributor
Breakers
Hammers Pneumatic
Rivet Busters Construction &
Pipe Drivers Demolition Tools
And more
Atlas Copco
American Pneumatic Tools
Authorized Distributor
Authorized Distributor
Hydraulic & Pneumatic
Pneumatic
Construction &
Construction &
Demolition Tools
Demolition Tools
2
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
Table of Contents
Crowder Pneumatics Pneumatic Air Tools
Crowder Supply Company Authorized Dealer of Chicago Authorized Dealer of American
Pneumatic Tools and Parts Pneumatic Tools and Parts
Adapters—Coupling, Bit Sleeve & Hole Saver 6 Sinker Drills 6 Paving Breakers 4
MAI & IBO Hollow Grout Rod & Swivels 7 Rock Drills 7 Rivet Busters 6
1” Rope / R25 / 100 Rope 21 Red Hawk Gas Powered Tool 16 Accessories 9
Striking Bars & Shank Adapters 25 Post Drivers 5 Water Driven Fans & Swing Gates 3
Betonomit Expansive Cracking Agent 27 Post Puller 6 Air Ducting & Air Receiver Tanks 4
Rock Drill Oil, Thread Lube and Line Oilers 27 Rock Drills 7 Air Manifolds 7
Cobra Combi Gas Power Breakers/Drills 32 Pump 8 Paving Breakers & Clay Diggers 10
CROWDER SUPPLY COMPANY INC Stoper & Feed Leg Drills 14 Needle/Chisel Scaler, Long Reach Scaler 15
8495 Roslyn Street Pick Hammers 15 Piston Scaler 18
Commerce City, Colorado 80022
Chipping Hammers 16 Air Scribe 19
Phone: 303-433-5144 888-883-5144
Fax: 303-433-3928 Rivet Busters 17 Retainers & Accessories 20
Www.crowdersupply.com Pump 17 Filter-Regulator-Lubricator Systems 24
2 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
3
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
888-883-5144 CROWDERSUPPLY.COM 3
888-883-5144
4
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
SPLIT SET
2' SS33-24 SS39-24 SS46-24 1. What is the drive end? Shank, Threaded, Square Impact Drive
2. What Size Nut you are Tightening?
3' SS33-36 SS39-36 SS46-36 3. How far down the bolt do you want to spin the nut, or the overall driver
length?
4' SS33-48 SS39-48 SS46-48
5' SS33-60 SS39-60 SS46-60 Here are some samples of some common nut spinner we build:
TT77-7-22 7/8 x 3-1/4" x 22" OAL, 1-1/8" SQ $175.00
6' SS33-72 SS39-72 SS46-72
TT77-7-30 7/8 x 3-1/4" x 30" OAL, 1-1/8" SQ 235.00
8' SS33-96 SS39-96 SS46-96 TT77-7-36 7/8 x 3-1/4" x 36" OAL, 1-1/8" SQ Call
10' SS33-120 SS39-120 SS46-120 TT77-7-48 7/8 x 3-1/4" x 48" OAL, 1-1/8" SQ Call
TT77-1625-22 7/8 x 3-1/4" x 22" OAL, 1-5/8" HEX 175.00
12' SS33-144 SS39-144 SS46-144
TT89-7-25 1 X 6-1/4" X 25"OAL, 1-1/8" SQ 195.00
PLATES SS-PLATE33 SS-PLATE39 SS-PLATE46
TTR32F-7-16 DRIVER R32F X 16"OAL, 1-1/8" SQ 155.00
TTR32F-8-21 DRIVER R32M X 21"OAL, 1-5/8" HEX Call
SPLIT BOLTS AVAILABLE GALVANIZED OTHER LENGTHS
AVAILABLE TTR38F-8-13 DRIVER R38F x 13" OAL, 1-5/8" HEX Call
4 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
5
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
WE CAN BUILD IT
Don’t see what you need?
Call us at 888-883-5144
RBD78HF 7/8HEX FEMALE X 1 1/8" SOCKET 65.00 7/8 HEX FEMALE X #8 OVAL
DDY78HF-8 95.00
SOCKET
888-883-5144 CROWDERSUPPLY.COM 5
888-883-5144
6
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ADAPTERS
HOLE SAVER
HSBR25 BELL HOLE SAVER R25/1” ROPE $150.00
SLEEVE ADAPTERS
BSR25-T38 R25/1” ROPE (FM) - T45 (M) $75.00 HSBR32 BELL HOLE SAVER R32/1-1/4” ROPE 164.00
BSR25-T45 R25/1” ROPE (FM) - T45 (M) Call HSBT38 BELL HOLE SAVER T 38 164.00
BSR25-T51 R25/1” ROPE (FM) - T45 (M) Call HSBT45 BELL HOLE SAVER T 45 219.00
BSR32-T45 R32/1-1/4” ROPE (FM) - T45 (M) 74.41 HSBT51 BELL HOLE SAVER T 51 225.00
BSR32-T51 R32/1-1/4” ROPE (FM) - T51 (M) 85.00
HSSR25 SPEAR HOLE SAVER R25/1” ROPE 150.00
BSR38-T45 R38/1-1/2” ROPE (FM) - T45 (M) Call
HSSR32 SPEAR HOLE SAVER R32/1-1/4” ROPE 164.00
BSR38-T51 R38/1-1/2” ROPE (FM) - T51 (M) 75.00
BST38-R51 R38/1-1/2” ROPE (FM) - R51/2” ROPE (M) 75.00 HSST38 SPEAR HOLE SAVER T 38 219.00
BST38-T51 T 38 (FM) - T51 (M) 75.00 HSST45 SPEAR HOLE SAVER T 45 219.00
BST38-HL20 T 38 (FM) - HL 2000 (M) 85.00 HSST51 SPEAR HOLE SAVER T 51 225.00
6 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
7
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
MAI BITS
Carbide Cross Bits
888-883-5144 CROWDERSUPPLY.COM 7
888-883-5144
8
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
Heavy Duty
3” OD Shank
5” OD Body 4” OD Shank
6” OD Body
GROUT INJECTION BODY RJ-BODY $625.00 RJ-BODYHD $835.00
SEALS/ DOUBLE LIP—SET OF 4 RJ-SEALS/DL-SET $64.00 RJ-SEALS/DLHD-SET $125.35
ROTOJEC SHANK T38-R32 RJ-T38-R32 $ 425.00
ROTOJEC SHANK T38-R38 RJ-T38-R38 $ 425.00
ROTOJEC SHANK T38-R51 RJ-T38-R51 $ 425.00
ROTOJEC SHANK T45-R32 RJ-T45-R32 $ 425.00
ROTOJEC SHANK T45-R38 RJ-T45-R38 $ 425.00 RJ-T45-R38HD $560.00
ROTOJEC SHANK T45-R51 RJ-T45-R51 $ 425.00 RJ-T45-R51HD $560.00
ROTOJEC SHANK T51-R32 RJ-T51-R32 $ 425.00
ROTOJEC SHANK T51-R38 RJ-T51-R38 $ 425.00 RJ-T51-R38HD $560.00
ROTOJEC SHANK T51-R51 RJ-T51-R51 $ 425.00 RJ-T51-R51HD $560.00
ROTOJEC SHANK T51-T76 RJ-T51-T76 $ 650.00 RJ-T51-T76HD $560.00
ROTOJEC SHANK H55-R31 RJ-H55-R32 $ 425.00
ROTOJEC SHANK H55-R38 RJ-H55-R38 $ 425.00
ROTOJEC SHANK H55-R51 RJ-H55-R51 $ 425.00
ROTOJEC SHANK H55-T76 RJ-T38-T76 $ 650.00
R32 - 1¼" ROPE GSR32 $380.00 GSR32-FC $250.00 GSR32-JB $195.00 GSR32-S $13.50
R38 - 1½" ROPE GSR38 420.00 GSR38-FC 250.00 GSR38-JB 195.00 GSR38-S 13.50
T38 GST38 420.00 GST38-FC 250.00 GST38-JB 195.00 GST38-S 13.50
8 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
9
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
REAMING BITS
BR22MM64 REAMING BIT BUTTON 2 ½" $175.00
BR22MM76 REAMING BIT BUTTON 3" 200.00
BR22MM89 REAMING BIT BUTTON 3 ½" 225.00
BR22MM57-6W REAMING BIT 6-WING 2 ¼" 180.00
BR22MM64-6W REAMING BIT 6-WING 2 ½" 175.00
BR22MM76-6W REAMING BIT 6-WING 3" 200.00
PROBLEM SOLVED!
Call us at 888-883-5144
BIT KNOCKER
BIT ADAPTER
888-883-5144 CROWDERSUPPLY.COM 9
888-883-5144
10
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
1'6 DS7711-18 61.60 DS7811-18 57.60 DS8811-18 69.60 DS7712-18 61.60 DS7812-18 57.60
2' DS7711-24 61.60 DS7811-24 57.60 DS8811-24 69.60 DS7712-24 61.60 DS7812-24 57.60
2'6 DS7711-30 64.60 DS7811-30 60.60 DS8811-30 78.83 DS7712-30 64.60 DS7812-30 60.60
3' DS7711-36 70.00 DS7811-36 66.00 DS8811-36 88.06 DS7712-36 70.00 DS7812-36 66.00
3'6 DS7711-42 74.50 DS7811-42 70.50 DS8811-42 97.30 DS7712-42 74.50 DS7812-42 70.50
4' DS7711-48 79.00 DS7811-48 75.00 DS8811-48 97.30 DS7712-48 79.00 DS7812-48 75.00
4'6 DS7711-54 83.70 DS7811-54 79.70 DS8811-54 103.20 DS7712-54 83.70 DS7812-54 79.70
5' DS7711-60 89.70 DS7811-60 85.70 DS8811-60 109.10 DS7712-60 89.70 DS7812-60 85.70
5'6 DS7711-66 95.70 DS7811-66 91.70 DS8811-66 115.00 DS7712-66 95.70 DS7812-66 91.70
6' DS7711-72 100.00 DS7811-72 96.00 DS8811-72 120.90 DS7712-72 100.00 DS7812-72 96.00
6'6 DS7711-78 104.40 DS7811-78 100.40 DS8811-78 127.20 DS7712-78 104.40 DS7812-78 100.40
7' DS7711-84 110.40 DS7811-84 106.40 DS8811-84 133.50 DS7712-84 110.40 DS7812-84 106.40
7'6 DS7711-90 114.90 DS7811-90 110.90 DS8811-90 139.80 DS7712-90 114.90 DS7812-90 110.90
8' DS7711-96 119.20 DS7811-96 115.20 DS8811-96 146.10 DS7712-96 119.20 DS7812-96 115.20
8'6 DS7711-102 125.10 DS7811-102 121.10 DS8811-102 154.40 DS7712-102 125.10 DS7812-102 121.10
9' DS7711-108 129.70 DS7811-108 125.70 DS8811-108 162.70 DS7712-108 129.70 DS7812-108 125.70
10' DS7711-120 138.40 DS7811-120 134.40 DS8811-120 171.00 DS7712-120 138.40 DS7812-120 134.40
10'6 DS7711-126 142.80 DS7811-126 138.80 DS8811-126 178.90 DS7712-126 142.80 DS7812-126 138.80
11' DS7711-132 149.50 DS7811-132 145.50 DS8811-132 186.80 DS7712-132 149.50 DS7812-132 145.50
12' DS7711-144 160.60 DS7811-144 156.60 DS8811-144 194.70 DS7712-144 160.60 DS7812-144 156.60
TAPER GAUGE
BIT SHELLS
NEED REPAIR?
We can re-taper, unplug and straighten BR-BS7811-6 REAMING BIT ADAPT 7/8" X 11° $46.66
your steel.
BR-BS7811-6 REAMING BIT ADAPT 7/8" X 12° 46.75
NEED SPECIAL LENGTH? BR-BS8811-6 REAMING BIT ADAPT1" X 11° 40.00
We can cut and taper steel to any length.
10 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
11
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
7/8" X 4¼ X SERIES 11
INT78S11-31 7/8" X 4¼ X 2'7" X 1-11/32" BIT $116.80
INT78S11-63 7/8" X 4¼ X 5'3" X 1-19/64" BIT 132.40
PILOT ROD
INT78S11-94 7/8" X 4¼ X 7'10" X 1-1/4" BIT 145.00 7/8" X 4¼ 12° Carbide Insert
INT78S11-126 7/8" X 4¼ X 10'6" X 1-7/32" BIT 162.00
PR78-31 PILOT ROD 7/8 X 4¼ - 12° CARBIDE INSERT
INT78S11-156 7/8" X 4¼ X 13'1" X 1-3/16" BIT 194.40 2'7"
INT78S11-189 7/8" X 4¼ X 15'9" X 1-9/64" BIT 211.20
PR78-47 PILOT ROD 7/8 X 4¼ - 12° CARBIDE INSERT
INT78S11-220 7/8" X 4¼ X 18'4" X 1-7/64" BIT Call 3,11"
INT78S11-252 7/8" X 4¼ X 21' X 1-9/16" BIT Call PR78-63 PILOT ROD 7/8 X 4¼ - 12° CARBIDE INSERT
7/8" X 4¼ X SERIES 12 5'3"
1" INTEGRAL DRILL RODS BR-BS7811-6 REAMING BIT ADAPT 7/8" X 11° $46.66
1" X 4¼
BR-BS7811-6 REAMING BIT ADAPT 7/8" X 12° 46.75
INT88-24 1 x 4 1/4" x 2' X 1 3/4" BIT $131.00
INT88-48 1 x 4 1/4" x 4' X 1 22/32" BIT 150.70 BR-BS8811-6 REAMING BIT ADAPT 1" X 11° 40.00
REAMING BITS
888-883-5144 CROWDERSUPPLY.COM 11
888-883-5144
12
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
12 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
13
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
H THREAD STEEL
(Shank Size)
D THREAD STEEL
(Shank Size)
6' BAR25-H 1" ROPE (FM) - H THD (MALE) $65.00 DS88D-72 $133.60
888-883-5144 CROWDERSUPPLY.COM 13
888-883-5144
14
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
14 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
15
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
Shank Size / Len MOIL POINT NARROW CHISEL PRICE 3" CHISEL PRICE
888-883-5144 CROWDERSUPPLY.COM 15
888-883-5144
16
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ASPHALT WEDGE
Shank Size DIGGING CHISEL PRICE
PB98-DC $89.20
PB109-DC $92.30
CONCRETE BREAKER
Shank Size PRICE
16 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
17
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
DETACHABLE
Shank Size SHANK PRICE
Pin Driver
Working End 1 x 4-1/4” Hex 1-1/8 x 6” Hex 1-1/4 x 6” Hex
888-883-5144 CROWDERSUPPLY.COM 17
888-883-5144
18
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
STANDARD—80X JUMBO—11X
Working End Rivet Part No. Length Price Part No. Length Price
Size
18 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
19
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
888-883-5144 CROWDERSUPPLY.COM 19
888-883-5144
20
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
Drill SHANK SIZE SHANK SIZE Drill SHANK SIZE SHANK SIZE
Depth Bit Size 7/8" X 3¼" 7/8" X 4¼ PRICE Depth Bit Size 7/8" X 3¼" 7/8" X 4¼ PRICE
6" 5/8" WB77-625-6 WB78-625-6 $109.90 9" 1-3/8" WB77-1375-9 WB78-1375-9 $105.20
9" 5/8" WB77-625-9 WB78-625-9 $114.70 14" 1-3/8" WB77-1375-14 WB78-1375-14 $109.90
14" 5/8" WB77-625-14 WB78-625-14 $127.90 20" 1-3/8" WB77-1375-20 WB78-1375-20 $111.20
20" 5/8" WB77-625-20 WB78-625-20 $137.60 26" 1-3/8" WB77-1375-26 WB78-1375-26 $110.70
6" 3/4" WB77-750-6 WB78-750-6 $90.70 9" 1-1/2" WB77-1500-9 WB78-1500-9 $121.00
9" 3/4" WB77-750-9 WB78-750-9 $96.70 14" 1-1/2" WB77-1500-14 WB78-1500-14 $125.80
14" 3/4" WB77-750-14 WB78-750-14 $108.60 20" 1-1/2" WB77-1500-20 WB78-1500-20 $130.50
20" 3/4" WB77-750-20 WB78-750-20 $109.90 26" 1-1/2" WB77-1500-26 WB78-1500-26 $138.20
26" 3/4" WB77-750-26 WB78-750-26 $111.20
Drill Bit C-9 Whilibits PRICE
33” 3/4” WB77-750-33 WB78-750-33 $141.64
8" 1/2" WBCP9-500-8 $88.80
45 3/4” WB77-750-45 WB78-750-45 $169.74
10.5" 1/2" WBCP9500-10.5 $101.50
6" 7/8" WB77-875-6 WB78-875-6 $93.30
8" 5/8" WBCP9-625-8 $91.90
9" 7/8" WB77-875-9 WB78-875-9 $94.40
14" 7/8" WB77-875-14 WB78-875-14 $105.10 12" 5/8" WBCP9-625-12 $102.80
20 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
21
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
888-883-5144 CROWDERSUPPLY.COM 21
888-883-5144
22
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ROCK BITS
CROSS BIT BUTTON BIT RETRAC BITS REAMING BITS
22 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
23
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
EXTENSION ROD
1½" ROUND 1½" ROUND 1½" ROUND 1½" ROUND
Single Thread Double Thread ALL THREAD Male - Female
ROCK BITS
REAMING
CROSS BIT BUTTON BIT RETRAC BITS BITS
SB77T38 SB78T38 SB88T38 SB89T38 BAR32-R25 1 1/4" ROPE (FM) - 1" ROPE( M) 75.00
$95.00 $95.00 $102.26 $110.00 BAR32-R38 1 1/4" R (FM) - 1 1/2" R (M) 80.89
BAR32-T38 1 1/4" ROPE (FM) - T 38 (M) 75.60
888-883-5144 CROWDERSUPPLY.COM 23
888-883-5144
24
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
EXTENSION ROD
1¾" ROUND 1¾" ROUND 1¾" ROUND
Single Thread Double Thread All Thread
HSBT45 BELL HOLE SAVER T45 $219.00 BS-T45-H20 T 45 (FM) - HL 2000 (M) 85.00
HSST45 SPEAR HOLE SAVER T45 219.00 BS-T45-T51 T 45 (FM) - HL T51 (M) 85.00
ROCK BITS
24 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
25
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
ROCK BITS
ADAPTERS
12' ET51-51R-144 $662.60 ET51-51R-148MF $903.80
CAR32-T51 1 1/4" ROPE - T51 $181.30
14' ET51-51R-168 867.90 ET51-51R-172MF 1203.40
CAT38-T51 T38 - T51 181.90
20’ ET51-51R-216 1215.10 ET51-51R-220MF 1581.70
CAT45-T51 T 45 - T 51 181.10
HOLE SAVER BAT38-T51 T38 (FM) - T 51 (M) 105.00
BAT45-T51 T45 (FM) - T 51 (M) 125.00
HSBT51 BELL HOLE SAVER T51 $225.00
BS-R32-T51 125ROPE (FM) - T51 (M) 85.00
HSST51 SPEAR HOLE SAVER T51 225.00
BS-T38-T51 T 38 (FM) - HL T 51 (M) 75.00
BS-T45-T51 T 45 (FM) - HL T51 (M) 85.00
Striking Bars & Shank Adapters
STRIKING BAR
SHANK 3/4 X 4¼ 7/8 X 3¼ 7/8 X 4¼ 1 X 4¼ 1 X 6¼
7/8" ROPE SB68R22 $80.73 SB77R22 $83.10 SB78R22 $83.10 SB88R22 $83.10
1" ROPE SB68R25 80.73 SB77R25 80.73 SB78R25 83.10 SB88R25 85.80 SB89R25 $95.00
1¼"ROPE SB68R32 80.73 SB77R32 95.00 SB78R32 95.00 SB88R32 95.00 SB89R32 110.00
1½ROPE SB77R38 102.26 SB78R38 102.26 SB88R38 102.26
T38 SB77T38 95.00 SB78T38 115.00 SB88T38 102.26
EXTERNAL FLUSHING FLUSHING COLLARS
External Flush Striking Bars
SHANK 7/8 X 4¼ 1 X 4¼
7/8" ROPE SB78R22EXT $83.10 SB-FC25 1" FLUSHING COLLAR, 7/8" BAR $165.00
1" ROPE SB78R25EXT 157.15 SB88R25EXT $157.15 SB-FC28 1 1/8" FLUSHING COLLAR, 1" BAR 125.00
888-883-5144 CROWDERSUPPLY.COM 25
888-883-5144
26
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
EXTENSION ROD
1½" ROUND 1½" ROUND 1½" ROUND
Single Thread Double Thread All Thread
ROCK BITS
ADAPTERS COUPLING
CAR25-R38 1" ROPE - 1 1/2" ROPE $81.90 CPLR38 1½" ROPE COUPLING $56.20
5/16 7/16 1/2 9/16 5/8 3/4 SB-FC25-1 1" SEALS Call
CS8MM CS11MM CS13MM CS14MM CS16MM CS19MM
SB-FC28-1 1 1/8" SEALS Call
Call $3.25 Call $3.25 Call $3.25
26 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
27
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
J752G Jet Lube J75 2 Gal $81.09 LO-5PF 1/6 Pint 1/2" NPT $45.00
J755G Jet Lube J75 5 Gal $172.17 LO-10PF 1/3 Pint 3/4" NPT $52.00
ECO2G Eco-Safe 2 Gal $99.91 LO-60-CF 1 Quart 1-1/4" or 1-1/2" NPT $341.25
ECO5G Eco-Safe 5 Gal $163.31 LO-120-CF 2 Quart 1-1/4" or 1-1/2" NPT $348.60
MSDS—Data Sheets available on our website: Crowdersupply.com LO-180-CF 3 Quart 1-1/4" or 1-1/2" NPT $551.25
RDO55G ROCK DRILL OIL 55 GALLON Call LO-290-CF 1.5 Gallon 2" or 2 1/2" NPT $1002.75
RDO5G ROCK DRILL OIL 5 GALLON $75.00 LO-690-CF 3 Gallon 2-1/2 or 3" NPT $1601.25
RDO1G ROCK DRILL OIL 1 GALLON $22.00 Air King Universal Coupling
AIR HOSE
AIR-H-19-50 CONTRACTORS AIR HOSE $68.00
3/4" X 50' W/FITTINGS Hose Ends Male NPT Ends Female NPT Ends
AIR-H-25-50 CONTRACTORS AIR HOSE 1" X 50' 105.00
1/4" AMH $9.80 AMB1 $9.70 AMC1 $8.35
W/FITTINGS
3/8" AM1 $6.20 AMB $8.35 AMC $8.35
AIR-H-25-WB 1" WIRE BRAID Call
1/2" AM5 $9.15 AM2 $7.25 AM3 $7.65
AIR-H-32-WB 1¼" WIRE BRAID Call
3/4" AM6 $6.25 AM7 $7.45 AM8 $7.35
AIR-H-50-WB 2" WIRE BRAID Call
1" AM11 $8.20 AM12 $8.25 AM13 $9.30
AIR-H-12-WHP WHIP HOSE 1/2" X 6' Call
UNIVERSAL CPLG AND SWIVEL
WHIP CHECK
WCSML WHIP CHECK 1/2" - 1¼" HOSE $12.50
MADE IN USA
WCLRG WHIP CHECK 1½" - 3" HOSE 18.50
MADE IN USA BETON-TYPR $73.50
BETONAMIT, a highly expansive cracking agent, is supplied in powder form, sealed in handy
5kg plastic packs. It must be mixed with a specific quantity of clean cold water and poured
into holes pre-drilled in the material to be cracked. After a few hours reaction time BETONA-
MIT exerts a huge expansive pressure, which quickly increases to such a degree that any hard
rock, standard or reinforced concrete can be broken. BETONAMIT can be used both indoors
and outdoors, in dry or humid conditions, even underwater.
This information is provided as a service and should not be relied upon. Always
make sure you read and follow all instructions provided with product.
888-883-5144 CROWDERSUPPLY.COM 27
888-883-5144
28
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
Phase 1, A hole of a precise diameter and depth is drilled into the material. The
wedge set (one wedge and two counter wedges) is inserted into the drill-hole.
Phase 2, The wedge is driven forward under hydraulic pressure, forcing the counter
wedges apart with a force of up to 400 tons. The material splits within seconds.
Phase 3, With enlarging counter wedges the split can be expanded to its maximum
width. Reinforcing rods break or can be cut up with a suitable power tool, e.g. the
Darda HCS 6 Combi- Shears.
28 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
29
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
D00-12 Darda Splitting Cylinder, Size 12 $16,500.00 D016-13 Block Manifold –2 $1610,00
D00-9 Darda Splitting Cylinder, Size 9 $14,120.00 D016-14 Block Manifold—3 $2080.00
D00-2 Darda Splitting Cylinder, Size 2 $12,570.00 D016-15 Block Manifold—4 $2560.00
D010-2 Plug, Size 2 $428.00 D016-20 High Pressure Hose—30’ Standard $539.00
(Couplings not included)
D010-3 Plug, Size 3 $526.00 D016-21 Low Pressure Hose—30’ Standard $198.00
(Couplings not included)
D010-9 Plug, Size 9 $688.00 D016-26 Quick Connect Coupler Set $109.00
(includes male and female)
D010-12 Plug, Size 12 $750.00 D016-27 Coupler Cover—2 Required $5.00 each
D011-2 Feather, Size 2 $452.00 D437 1/4 Female x 3/8 Male Reducer—2 $4.20 each
Required
D011-9 Feather, Size 9 $722.00 D00-HPT Plug & Feather Lubricant—1/2 Pint $24.50
Can
D011-73 Enlarging Feather, Size 7 $708.00 D00-PT Plug & Feather Lubricant—1 Pint Can $48.00
D011-8123 Enlarging Feather, Size 8 and 12 $764.00 D014-3 Plug & Feather Lubricant—1/2 Pint $246.00
Can, Case of 12 Cans
D011-93 Enlarging Feather, Size 9 $690.00 D014-4 Plug & Feather Lubricant—1 Pint Can, $480.00
Case of 12 Cans
888-883-5144 CROWDERSUPPLY.COM 29
888-883-5144
30
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
Mid-Western is the OEM of the S83 line of Jack Leg Drills. We manufacture our parts and drills right here in the United States. Our castings
are made right here in America and we do all of our own precision machining. It's no wonder why our drills perform better than any of the
foreign competition. Many have tried to copy our drills but none have been able to equal our quality. We have been manufacturing reliable
equipment for over 65 years and we carry on that tradition today.
Proven Design Versatility
The most popular Jack Leg drill on the market Available in telescopic and power retractable
The OEM of the popular MWS83 Jack Leg Drill models
and TUL2B and FL7 feed Legs Available in either a 7/8" or 1" chuck size
Precision manufactured parts that run better Sold as either wet or dry (with or without water)
and wear down slower Can easily be converted to a powerful sinker
Backed by over 65 years of American-made drill
experience
Affordability
Mid-Western drills are high quality and competi-
tively priced
In-house manufactured parts last longer and
perform better
Part No. Description Piston Stroke Overall Total Air Water Chuck Price
Dia. Length Length Weight Hose Hose Size
Telescopic Feed Legs (in) (in) (in) (lbs) Size Size (in)
(in) (in)
MWS83FC72 Drill Complete with 72" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,500
MWS83FC60 Drill Complete with 60" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,620
MWS83FC54 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,620
MWS83FC48 Drill Complete with 48" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,620
MWS83FC36 Drill Complete with 36" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,620
MWS83FC24 Drill Complete with 24" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,620
MWS83FD72 Drill Complete with 72" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,490
MWS83FD60 Drill Complete with 60" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,610
MWS83FD54 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,610
MWS83FD48 Drill Complete with 48" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,610
MWS83FD36 Drill Complete with 36" Leg and 3 2-1/2 27-1/4 72 1 1/2 1 $5,610
MWS83FD24 Drill Complete with 24" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,610
Power Retractable Feed Legs
MWS83FA754 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,855
MWS83FB754 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,890
30 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
31
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
Proven Design
The most popular Feed Leg on the market to accompany the best Jack Leg drills
The OEM of both the TUL2B and FL7 Feed Leg models
Precision manufactured parts that run better and wear down slower
Backed by over 65 years of American-made experience
Versatility
Available in telescopic and power retractable models
Available in several different lengths
Adjustable handle allows personal comfort for any driller
Affordability
Mid-Western Feed Legs are the highest quality equipment at the best price
In-house manufactured parts last longer and perform better
Part No. Description Standard Extended Price
Length Length
(in) (in)
TUL2B24 Telescopic Feed Leg 24 53-3/8 $1,125
TUL2B36 Telescopic Feed Leg 36 71-3/8 $1,125
TUL2B48 Telescopic Feed Leg 48 89-3/8 $1,125
TUL2B54 Telescopic Feed Leg 54 $1,125
Accessories
Part No. Description Price
888-883-5144 CROWDERSUPPLY.COM 31
888-883-5144
32
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
COBRA COMBI
GAS POWERED BREAKERS/DRILLS
The Atlas-Copco Cobra Combi is a successor to the earlier and well-known model Cobra 149 and the
Pionjar Gas Drills. At the same time, it is unique in its design since several improvements have been
made to meet both environmental requirements from authorities as well as operators demand of
ergonomic design and user comfort.
It is not only the design that is new on the Cobra Combi. Firstly, the noise level is lowered from 114 to
110 dB thanks to a new muffler and it is thereby fulfilling the European Noise Emission Directive (NED).
Secondly, new vibration dampened handles reduces vibration levels from 8 to 5 m/s². Also, with a new
carburetor and a catalytic converter, the emissions are cleaner and meet the tough US emission
regulations, EPA1. Further, with a new choke control, new carburetor and user-friendly start
instructions, Cobra Combi is easy to use. The new gas control gives the operator better control of the
speed and enhance the precision when operating.
TECHNICAL SPECIFICATIONS
Vibrations level
Sound level
Weight Length Depth Width over handles Tool shank (Acc. to ISO
(Acc. to ISO 3744)
8662)
11.06
55 lbs 28.81 in 23.03 in 7/8” - 4 1/4” 110 dB 5 m/s2
in
ENGINE
Cooling Starter Fuel Fuel
Type Power Recommended fuel Oil type Oil mix
system system capacity consumption
CAPACITY
Drilling speed
Impact rate Max drilling depth
(In granite, 1 21/64 drill)
A Multi-Purpose Too
With a range of 18 different tools, you can use the Cobra Combi for everything from cutting and breaking, to drilling, driving
and compacting. So whether you need to just break a small patch of concrete, or split a rock, you can get the job finished with
a gas-powered machine in the same time it takes just to set up a compressor and hoses.
Breaking Concrete Cutting Asphalt Drilling Digging Splitting Rocks
32 888-883-5144 CROWDERSUPPLY.COM
888-883-5144
33
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
COBRA PRO
The Cobra™ Pro breaker is the heavy hitter in the range. Clocking up an incredible 44
ft/lb at the tool tip, it delivers almost twice the impact energy of other petrol-driven
breakers on the market. In fact, it offers the same power-to weight ratio as many
pneumatic or hydraulic breakers, but without being tied down to a power source or
hoses.
The Cobra™ Pro breaker helps you get the job done
faster. This is due to a combination of high percussive
energy and high blow frequency. Put them together,
and you’ll see why the Cobra™ Pro breaker is such a
productive machine.
With an extensive range of tools, you can use the
Cobra™ Pro for everything from cutting and breaking,
to driving and compacting.
COBRA TT
9245 2813 51 Feather & Wedge Set 1.34” 4.6 lbs. $93.59
888-883-5144 CROWDERSUPPLY.COM 33
888-883-5144
34
MINING AND CONSTRUCTION CONSUMABLES CROWDERSUPPLY.COM
34 888-883-5144 CROWDERSUPPLY.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
Page 13 Page 15
PAVING BREAKERS
BREAKERS - 25 LB CLASS
BREAKERS - 35 LB CLASS
Air VR-
Weight Chuck Size Consumption Blows per Retainer Muffler handles
Part Number Description (lbs) (inch) (cfm) Minute type incl. incl. Price
8900 0030 10 CP 1210 SVR 59.0 1 1/4 x 6 48 1500 Latch Yes Yes $1130
8900 0030 08 CP 1210 SVR 59.0 1 1/8 x 6 48 1500 Latch Yes Yes $1130
8900 0030 05 CP 1210 SVR 53.0 1 x 4 1/4 48 1500 Latch Yes Yes $1100
2 888-883-5144 CROWDERPNEUMATICS.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
3
BREAKERS - 60 LB CLASS
The CP 1230 breakers are heavy duty, robust tools well suited for medium
demolition work in construction and plant maintenance.
BREAKERS - 90 LB CLASS
The CP 1240 demolition tools are designed to deliver the power and durability necessary for
a variety of construction and plant maintenance applications such as breaking heavy
concrete, reinforced concrete, frozen ground, macadam, boulders and pavement.
T024535 CP 1240 SVR 95.0 1 1/4 x 6 84 1200 Latch Yes Yes $1265
T024536 CP 1240 SVR 95.0 1 1/8 x 6 84 1200 Latch Yes Yes $1265
888-883-5144 CROWDERPNEUMATICS.COM 3
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
4
SPIKE DRIVER
Chuck
Weight size Air Consumption Blows per Retainer Muffler
Part Number Description (lb) (in) (cfm) minute type incl. Price
REPLACEMENT PARTS
4 888-883-5144 CROWDERPNEUMATICS.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
5
Rivet Busters
Pound for pound, there is no hammer with more hitting power than a rivet buster.
Even a paving breaker would need to be at least twice as heavy to deliver an
equivalent blow. This super-power can still be controlled thanks to low blow
frequency and teasing throttle. That’s why the rivet buster is one of the favorite tools
of demolition contractors in the US. Users have discovered many new applications for
rivet busters for working in both concrete and steel. No longer is the buster used
exclusively by iron workers for forming and cutting rivets, but it has now found its
way into the hands of operators who need the most powerful tool for the job.
Concrete Applications
Bridge deck work, where weight of breakers is restricted
De-capping foundation pillars, where concrete is very hard
Medium to heavy concrete demolition
As an alternative to paving breakers where high hitting power is required but applied in a restrained space or
working horizontally.
Metal Applications
Cutting and removing large rivets and bolts with narrow chisels and backout punch, or other special steel and
accessories
Cutting metal tanks or plates (3/16” thick, 5mm) with ripper chisel
Industrial applications such as foundries or the petrochemical industry with beryllium chisels
4611-P 11” Open Handle 4608P 8” Open Handle 4611D—11” D-Handle 4608D—8” D-Handle
Teasing throttle for progressive hitting frequency New buffer ring is now 90 durometer rubber for extra
gives better control of such a powerful machine life
Special Boyer valve makes the cylinder stroke effec- Stepped piston to prevent accidental ejection of the
tive longer for more hitting power piston
Boyer valve’s high quality deign makes the blow Choice of cylinders—11” or 8”
more consistent Choice of handle—Open grip with outside trigger or
Forged steel handle for long life in rugged conditions “D” Handle with inside trigger
Stepped piston of hardened steel 1/2” inlet bushing
Air Blows
Weight consumption Stroke per
Part Number Description lb cfm (in) minute Retainer type Price
3303 0051 03 Rubber Bumper 3.50 9247 9855 30 Rubber Bumper 3.72
Safety and Operating Instructions as well as Parts See our Air Hose & Accessories under
Breakdowns available at www.crowderpneumatics.com Crowder Supply—page 27
888-883-5144 CROWDERPNEUMATICS.COM 5
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
6
SINKER DRILLS
Chicago Pneumatic Sinker Drill’s robust design incorporates a side exhaust and a 'flat back' that
makes them easy to handle in quarry, mine and general excavating work. The design also
provides a main valve and cylinder porting concept that helps maintain constant drilling speed
throughout a long service life. Working parts are constantly protected with an effective
lubrication system.
8900 0020 01 CP 0022 28.0 7/8x3 1/4 54 2200 Spring VR handles kit $1390
8900 0020 02 CP 0022 28.0 7/8x4 1/4 54 2200 Spring VR handles kit $1390
T022319 CP 0032 55.0 1x4 1/4 103 2200 Latch VR handles kit $1595
Beavertail
T022318 CP 0032 55.0 7/8x3 1/4 103 2200 Latch VR handles kit $1595
Beavertail
T022117 CP 0032 55.0 7/8x4 1/4 103 2200 Latch VR handles kit $1595
Beavertail
T025431 CP 0032 S 56.0 7/8x4 1/4 103 2200 Latch Inc. Muffler -- $1770
Beavertail 3dBA
R125569 Muffler Kit $501.91
R147457 Wet Kit $165.63
T022259 CP 0069 60.0 1x4 1/4 130 1900 Latch Inc. water kit $1770
Beavertail
T006661 CP 0069 60.0 7/8x4 1/4 130 1900 Latch VR handles kit $1770
Beavertail
T025423 CP 0069 WET 60.0 7/8x4 1/4 130 1900 Latch VR handles kit $1930
Beavertail
Z6544438 Wet Kit $254.85
R154915 VR Handles Kit for 0022, 0032 and 0069 Rock Drill $319.94
6 888-883-5144 CROWDERPNEUMATICS.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
7
These versatile tools are both a drill and a chipping hammer. With the CP 14, CP 9A & F, a push of the
rotation release button easily and quickly converts the tool to a chipping hammer.
The CP-0009 and CP-0014RR rotary hammers are designed for a wide variety of constructions and
maintenance applications such as driving or setting masonry anchors and drilling holes
in concrete, bricks or rock. As a hammer, these tools can be used for chipping,
scarifying, scaling and cleaning welds.
Excellent power-to-weight ratio helps drill holes faster and easier than
comparable electric rotary hammers
Built-in oiler provides continuous lubrication
Teasing throttle for precise control
Rotation release button converts tool to a hammer (CP 14, CP 9A & F)
Cushioned piston for smooth operation, long life
'Hushed Power' muffler available to reduce noise (CP 9CS & ES)
Air Blows
Part Weight Chuck size consumption per
Number Description lb inch cfm minute Retainer type Comments Price
CP 0009
Right hand rotation CP 0014
With an adaptor, can be Superior drilling rates
used with electric hammer Greater drilling capacity
drill bits compared to plug hole
Electric hammer tools are
Spline version available drills
available on our website:
Adapter (R137586) round Designed for production
www.crowdersupply.com drilling of small holes
to SDS
888-883-5144 CROWDERPNEUMATICS.COM 7
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
8
Chipping Hammers
CP 0012
Optimum power-to-weight ratio for a good balance between hitting power
and easy handling
Straight forward design for easy maintenance and repair
Handle design similar to the well-known CP 0009
Teasing throttle and an air cushioned piston give the operator precise
control
Muffler assembly as standard
Rugged construction, hardened steel cylinder and handle
Choice of bushing: .680” round chisel rotates freely or .580” hex prevents chisel rotation
WHIP HOSE IS NOT INCLUDED WITH CHIPPING HAMMER
CP 0017
Designed for years of trouble-free service
Closed aluminum handle with inside trigger for maximum effectiveness
and operator comfort
Oil-resistant neoprene exhaust deflectors
Available with choice of .580” hex or .680” round bushings
Vibration-reduced and muffler included
WHIP HOSE IS NOT INCLUDED WITH CHIPPING HAMMER
8 888-883-5144 CROWDERPNEUMATICS.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
9
CP 4123 CP 4125
Classic simplate valve Unique ring valve as standard for harder blow
Heat treated cylinder in tough applications or dirty environments
Now with spline lock instead of clip lock- Chrome plated cylinder for extra durability
ing mechanism Spline locking to prevent loosening of handle
or cylinder
Muf
Air Blows fler
Weight consumptio Stroke per incl.
Part Number Description (lb) Chuck size (in) n (cfm) minute Retainer type Price
8900 0001 05 CP 4123 2H 13.0 .580"Hex 25 2 2400 US Standard (with spring) - $390
8900 0001 04 CP 4123 2R 13.0 .680"Rnd 25 2 2400 US Standard (with spring) - $390
8900 0001 07 CP 4123 3H 14.3 .580"Hex 26 3 1920 US Standard (with spring) - $390
8900 0001 06 CP 4123 3R 14.3 .680"Rnd 26 3 1920 US Standard (with spring) - $390
8900 0001 09 CP 4123 4H 15.5 .580"Hex 27 4 1500 US Standard (with spring) - $410
8900 0001 08 CP 4123 4R 15.5 680"Rnd 27 4 1500 US Standard (with spring) - $410
8900 0001 11 CP 4125 2H 13.0 .580"Hex 26 2 2400 US Standard (with spring) - $660
8900 0001 10 CP 4125 2R 13.0 680"Rnd 26 2 2400 US Standard (with spring) - $660
8900 0001 13 CP 4125 3H 14.3 .580"Hex 27 3 1920 US Standard (with spring) - $660
8900 0001 12 CP 4125 3R 14.3 680"Rnd 27 3 1920 US Standard (with spring) - $660
8900 0001 15 CP 4125 4H 15.5 .580"Hex 28 4 1500 US Standard (with spring) - $675
8900 0001 14 CP 4125 4R 15.5 680"Rnd 28 4 1500 US Standard (with spring) - $675
888-883-5144 CROWDERPNEUMATICS.COM 9
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
10
CP 4130
Locking mechanism with four high strength 1/2” bolts
“D” handle with outside trigger and extra safety mechanism
Muffler assembly as standard
Simplate valve for smooth operation
Strong and reliable
Available in 3” or 4” cylinder stroke versions
Choice of bushing: .680” round chisel rotates freely or .580” hex prevents
chisel rotation
CP 4131
Excellent power-to weight ratio helps drill holes faster and easier than
comparable electric rotary hammers
Built-in oiler provides continuous lubrication
Teasing throttle for precise control
Cushioned piston for smooth operation and long life
CP 4132
Four high strength 1/2” bolts locking mechanism
“D” Handle with inside trigger
Standard retainer
Strong and reliable
Available in 3” or 4” cylinder stroke versions
Choice of bushing: .680” round chisel rotates freely or .580” hex prevents
chisel rotation
8900 0001 17 CP 4130 3H 18.5 .580"Hex 26 3 1920 US Std w/ spring Yes $390
8900 0001 16 CP 4130 3R 18.5 680"Rnd 26 3 1920 US Std w/ spring Yes $390
8900 0001 19 CP 4130 4H 19.5 .580"Hex 27 4 1500 US Std w/ spring Yes $410
8900 0001 18 CP 4130 4R 19.5 680"Rnd 27 4 1500 US Std w/ spring Yes $410
P107243 Retainer & Lock Spring $65.09
P070994 Lock Spring $1.80
9246 0203 63 Whip Hose $40.00
8900 0001 34 CP 4131 3H 19.0 .580"Hex 26 3 1900 Ball type retainer Yes $460
8900 0001 33 CP 4131 3R 19.0 .680"Rnd 26 3 1900 Ball type retainer Yes $460
Z8389857 Retainer Complete—includes: Retainer, 6 Steel Balls, Spring, Retainer Sleeve and External Circlip $157.02
Z8754857 Steel Balls—Set of 6 $13.56
9246 0203 63 Whip Hose $40.00
9245 9998 00 CP 4132 3R 15.0 .680”Rnd 33.23 3 1800 US Std w/ spring - $390
9245 9997 99 CP 4132 3H 15.0 .580”Hex 33.23 3 1800 US Std w/ spring - $390
9245 9998 98 CP 4132 4R 15.0 .680”Rnd 33.23 4 1800 US Std w/ spring - $390
9245 9998 80 CP 4132 4H 15.0 .580”Hex 33.23 4 1800 US Std w/ spring - $390
9246 0203 71 Hose Swivel—7/8”-24 inlet thread with 3/8” male pipe thread $25.00
9247 9853 50 Retainer—Oval Collar $62.24
9246 0208 36 Lock Spring $1.80
9246 0203 63 Whip Hose $40.00
10 888-883-5144 CROWDERPNEUMATICS.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
11
SLUDGE PUMPS
The CP 77 sludge pump easily handles water containing 15% solids and particles
up to 1” (25 mm) in size. It is suitable for pumping seawater and certain
corrosive chemicals.
T022224 CP 0010 Sump 33.0 2 7/8 100 8 1/4x9 250-125 gal/min at $1370
pump 90’
888-883-5144 CROWDERPNEUMATICS.COM 11
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
12
Part # Free Speed (rpm) Output Shaft Air Inlet Size (in) Length (in) Weight (lbs) Price
CONCRETE VIBRATOR
Chicago Pneumatic's CP 2190 heavy duty concrete vibrator is designed for removing
air pockets from pourings of low slump concrete in columns, footings, slabs and
walls. It has a greater radius of influence which translates to a greater amount of
work accomplished in a shorter period of time. And, unlike electric concrete vibra-
tors, there is no chance of shock or need for extension cords.
Variable speed throttle
In-line lubricator
Auxiliary air hose
Locked motor end plates
1/2” NPT air connection
12 888-883-5144 CROWDERPNEUMATICS.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
13
Backfill Tampers
CP backfill tampers are designed to effectively compact soil around foundations and other structures and
for compacting backfill in trenches. Unlike the CP backfill tampers, many competitors on the market were
designed for sand ramming only and thus lack the full power necessary for contracting operations. The CP
0003 is designed to handle light-to-medium applications; the CP 0004 RV is the ideal tool for heavier jobs.
Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill,
including clay and soils containing high percentages of finely crushed or powered material
Heat-treated cylinder and chrome plated piston - significantly extends tool life
Adjustable packing - maintains a positive air seal
Butt held with clamp screw - for quick, easy replacement
Exhaust deflector - directs air, moisture and oil away from operator
Integral oiler - continuously lubricates tool during operation
Well balanced, smooth operation tool - easily guided by one person
Part
Number Description Weight (lb) Air consumption (cfm) Blows per minute Price
Scabblers
The CP 0006 & CP 0066 scabblers are ideal tools for cleaning and
roughening concrete and construction joints. They can also be used
to produce ornamental or contrasting finishes on road and building
structures. With their different handle designs, CP 0006 is more
suitable when working on large surface areas whereas the CP 0066
is mainly used for hard-to-reach areas.
T022137 CP 0006 10.0 4 2/5 28 Three 4-point carbide Back head handle $570
Scabbler tipped pistons
8900 0040 01 CP 0006 SVR 14.3 28 Three 4-point carbide Vibration-Reduced $770
Scabbler tipped pistons Handle
T024412 CP 0066 10.0 2 15 Three 4-point carbide In-line handle for $580
Scabbler tipped pistons tight areas
F064604 Piston for CP 0006 $70.60
R145921 Piston for CP 0066 $76.16
F826706 Piston Cap for CP 0006 $5.39
R147614 Piston Cap for CP 0066 $1.65
888-883-5144 CROWDERPNEUMATICS.COM 13
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
14
CP 0122 and CP 0125: The most powerful pick hammers in the range,
weighing 24-31 lbs. They are particularly suitable for working with relatively
hard concrete in demolition, pile-capping, or bridge deck applications.
CP 0111 and 0222: Very popular multi-purpose pick, with good power-to-weight ratio
and latch retainer for quick and easy change of steels. Available with both inside and outside trigger. (22lbs
(10Kg).
FL 0022: Originally designed for mining and soft tunneling applications, the FL 0022 is a very slim, easy to
handle tool. It is made entirely of steel with quality components for highest power and long lasting reliability.
Screw-on retainer with square chucks for clay digging spades or cone retainers for demolition pick
applications. (22lbs (10Kg).
8900 0001 41 CP 0111 CHIT Pick 29.0 7/8x3 1/4 45 1800 Latch Close handle - - $930
Hammer Inside trigger
8900 0001 20 CP 0111 CHLA Pick 29.0 1x4 1/4 45 1800 Latch Closed handle - - $930
Hammer Outside trigger
8900 0001 43 CP 0122 S Pick 24.3 7/8x3-1/4 47 1380 Screw-on Closed handle- Yes $1290
Hammer Inside trigger
8900 0001 45 CP 0122 SVR Pick 29.8 7/8x3 1/4 44.5 1380 Screw-on Closed handle- Yes $1530
Hammer Inside trigger
8900 0001 21 CP 0222 CHIT Pick 22.0 7/8x3 1/4 40 1700 Latch Closed handle - - $720
Hammer Inside trigger
8900 0001 22 CP 0222 CHITBS Pick 24.3 7/8x3 1/4 40 1500 Latch Closed handle- Yes $860
Hammer Inside trigger
8900 0001 23 CP 0222 CHOTBS Pick 24.3 7/8x3 1/4 40 1500 Latch Closed handle- Yes $860
Hammer Outside trigger
14 888-883-5144 CROWDERPNEUMATICS.COM
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
15
PNEUMATIC SAW
CP impact wrenches have been developed as a simple 3-piece construction for ease and speed of
servicing. They have durable steel clutch housings (zinc option on some models). These tools
are heavy duty and suitable for high production rates such as those on production/ assembly
lines, where high durability is required and the tools are used frequently. Torque Controlled -
Tool 'shuts off' at a predetermined torque with the added benefits of being able to eliminate some
operator influence and be used for 2 or more torques.
Part Drive Socket Torque Torque
Number Description (in) retainer Clutch Type Handle style working max. Price
T025285 CP6300 RSR 3/8" Friction Ring Single Dog Pistol 54-203 243 $335
T025214 CP6500 RS 1/2" Pin Double-Dog Pistol 140-480 710 $415
T025216 CP6500 RSR 1/2" Friction Ring Double-Dog Pistol 140-480 710 $425
T025215 CP6500 RSS 1/2” Quick Change Double-Dog Pistol 140-480 710 $385
T024059 CP6060 SASAB 3/4" Hole 2-Jaw Pistol 265-880 1350 $2170
T024058 CP6060 SASAR 3/4" Friction Ring 2-Jaw Pistol 265-880 1350 $2170
T024060 CP6060 SASAK 1” Hole 2-Jaw Pistol 265-880 1350 $2170
T022580 CP0611 GASED 1" Hole 2-Jaw D Handle 1220-2440 3790 $3885
Outside Trigger
T022581 CP0611 GASEL #5 Spline #5 Spline 2-Jaw D Handle 1220-2440 3790 $3995
Outside Trigger
T022578 CP0611 PASED 1" Hole 2-Jaw D Handle Inside 1220-2440 3790 $3885
Trigger
T022579 CP0611 PASEL #5 Spline #5 Spline 2-Jaw D Handle Inside 1220-2440 3790 $3995
Trigger
T017755 CP6120 GASEL #5 Spline #5 Spline 2-Jaw D Handle 815-2710 4740 $5885
Outside Trigger
T018235 CP6120 PASEL 1 1/2” #5 Spline 2-Jaw D Handle Inside 815-2710 4740 $5885
Trigger
T018237 CP6120 GASED 1 1/2" Hole 2-Jaw D Handle 815-2710 4740 $5715
Outside Trigger
T018841 CP6120 PASED 1 1/2" Hole 2-Jaw D Handle Inside 815-2710 4740 $5715
Trigger
888-883-5144 CROWDERPNEUMATICS.COM 15
888-
888-883-
883-5144
CROWDERPNEUMATICS.COM
16
Easy to start
Vibration-dampening
With a choke control, carburetor and user-friendly handles
have reduced vibration
instructions, the Red Hawk easy to start. An optional levels from 8 to less
guide roller makes it easier to pull downwards to start than 4.8 m/s2 .
Easy to transport
The Red Hawk weighs in at about 50 pounds. Each
comes with its own carrying case which fits easily into
the trunk of your car.
TECHNICAL DATA
Vibration
Sound Level
Width over Level
Model Part Number Wt (lb) L (in) D (in) Tool Shank (in) (Acc. To ISO Price
handles (in) (Acc to ISO
3744)
8662)
Red Hawk 2010 8318 0900 02 50.5 27.3 11.0 23.0 7/8" - 4-1/4" 107 dB 4.7 m/s2 $4195
ENGINE
Cooling Starter Recommended
Type Power Oil Type Oil Mix Fuel Capacity Fuel Consumption Impact Rate
System System Fuel
16 888-883-5144 CROWDERPNEUMATICS.COM
888-883-5144
Skid Steer,
Tractor Package
Run your hydraulic
tools off the Auxiliary
hydraulics port using
an oil divider.
Page 6
Page 6 Page 4
888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
2
Here's this compact, quiet tool…and it hits harder than any other type of breaker. That's
because hydraulics are more efficient than electric, pneumatic or petrol-driven tools. For
example, a 70 lb hydraulic breaker gives you the same hitting power as a 90 lb pneumatic.
Thanks to their amazing impact energy, hydraulic breakers can be used on concrete, asphalt
and frozen ground. You can, of course, also use them for trenching, tie-tamping, spike driving
and general demolition.
Weight Back
incl. Pressure Working
Shank Size hose Length Oil Flow Impact Rate Max pressure
Part Number Description (inch) (lb) (in) (gpm) (blows/min) (psi) (psi) EHTMA Price
1801 3443 41 LH 190 E breaker 1 x 4-1/4 55.12 25.6 5.3 1300-1400 145 1378-1595 C $2165
1801 3546 93 LH 230E HBP 1-1/8 x 6 66.14 28.9 7.9 1500-2100 508 1668-1885 C/D $2320
breaker
1801 3546 95 LH 230E HBP 1-1/4 x 6 66.14 28.9 7.9 1500-2100 508 1668-1885 C/D $2320
breaker
1801 3647 01 LH 280E HBP 1-1/8 x 6 71.65 30.1 7.9 1350-1750 508 1668-1885 C/D $2470
breaker
1801 3647 03 LH 280E HBP 1-1/4 x 6 71.65 30.1 7.9 1350-1750 508 1668-1885 C/D $2470
breaker
1801 3647 09 LH 400 E HBP 1-1/8 x 6 85.9 30.1 7.9 1150-1600 290 1668-1885 D $2800
breaker
1801 3647 11 LH 400 E HBP 1-1/4 x 6 85.9 30.1 7.9 1150-1600 290 1668-1885 D $2800
breaker
LH 190 E Breaker LH 230 E Breaker See our Hydraulic Accessories LH 280 E HBP Breaker LH 400 E Breaker
On Page 4
2 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
3
STANDARD BREAKERS
The first time you use a hydraulic breaker, you're in for a surprise. Here's this
compact, quiet tool…and it hits harder than any other type of breaker. That's
because hydraulics are more efficient than electric, pneumatic or petrol-driven
tools. For example, a 70 lb hydraulic breaker gives you the same hitting power as a
90 lb pneumatic. Thanks to their amazing impact energy, hydraulic breakers can be
used on concrete, asphalt and frozen ground. You can, of course, also use them
for trenching, tie-tamping, spike driving and general demolition.
Weight
incl. Back Working
Shank Size hose Length Oil Flow Impact Rate Pressure pressure (ps EHTMA
Part # Description (inch) (lb) (inch) (gpm) (blows/min) Max (psi) i) (class) Price
1801 3443 36 LH 180 1 x 4-1/4 43 25.6 5.3 1300-1400 145 1378-1595 C $1960
breaker
1801 3546 90 LH 220 HBP 1-1/4 x 6 53 28.9 7.9 1500-2100 508 1668-1885 C/D $2115
breaker
1801 3546 88 LH 220 HBP 1-1/8 x 6 53 28.9 7.9 1500-2100 508 1668-1885 C/D $2115
breaker
1801 3543 46 LH 220 breaker 1 x 4-1/4 50 27.2 7.9 1500-2100 218 1523-1813 C/D $2040
1801 3646 97 LH 270 HBP 1-1/8 x 6 58 27.2 7.9 1500-2100 218 1523-1813 C/D $2270
breaker
1801 3646 99 LH 270 HBP 1-1/4 x 6 58 27.2 7.9 1500-2100 218 1523-1813 C/D $2270
breaker
1801 3747 07 LH 390 HBP 1-1/4 x 6 73 30.1 7.9 1150-1600 290 1668-1885 D $2600
breaker
1801 3747 05 LH 390 HBP 1-1/8 x 6 73 30.1 7.9 1150-1600 290 1668-1885 D $2600
breaker
LH 180 Breaker LH 220 HBP Breaker LH 270 HBP Breaker LH 390 HBP Breaker
888-883-5144 CROWDERHYDRAULICTOOLS.COM 3
888-883-5144
4
The reliable motor, whether you chose gas, diesel or electric, supplies hydraulic power in
accordance with the “Power-on-Demand” principle, i.e. the power pack runs idle until the tools
begins to work. The power packs are protected by a strong frame made of steel tube. They
have been tested for more than 1000 hours of operation and with several thousand units in
daily operation.
Max
Hose Elec. Weight incl. Oil pressure EHTMA
Part Number Description Incl. Motor/Engine Start oil (lb) flow (gpm) (psi) class Price
1807 0080 31 LP 9-20 P PAC Yes 9 HP Honda gas No 159 5 2175 C $4995
1807 0110 20 LP 13-20 DE PAC No 10 HP Lomardini Yes 256 5 2175 C $5900
diesel
1807 0110 23 LP 13-30 P PAC Yes 13 HP Honda gas No 201 5-8 2175 C/D $5865
1807 0160 18 LP 18-30 PE PAC No 18 HP B&S Yes 260 5-8 2466 C/D $8895
Vanguard gas
1807 0160 40 LP 18-40 PE PAC No 18 HP B&S Yes 260 5-10 3103 C/D/E $7700
Vanguard gas
1807 0160 32 LP 18-2X20/1X40 PE No 18 HP B&S Yes 245 2x5/1x10 2103 C/E $7905
PAC* Vanguard gas
All power packs include a filter indicator. *) Twin Outputs, Oil Flow 2 at 5 gpm each or 1 at 10 gpm
Hydraulic Accessories
RUN YOUR HYDRAULIC TOOLS FROM YOUR SKID STEER, TRACTOR OR BACKHOE!
Use your auxiliary hydraulics port to power your hydraulic tools by connecting an oil
divider and extension hoses.
Max oil flow Regulated oil flow
Part Number Description rate (gpm) rate (gpm) EHTMA class Price
EXTENSION HOSES
By adding one or two 23 ft extension hoses you can use up to 70 ft of hose with no significant drop in pressure. The
hoses are light and flexible and are fitted with flat-face, quick release couplings. (Extension hoses come as standard
with LP 9-20 and LP 13-30 P).
4 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
5
Used for driving in road barrier tubes, profiles, signposts, fences and a wide range of anchors. The post drivers
provide stable, powerful, high speed driving for a variety of post sizes. When operated with an optional hose-
mounted remote-controlled valve, the drivers can be run with both open- or closed-centre systems. Now
you can use your skid steer, backhoe, excavator or tractor to power your Post Driver. These tools are
designed to work with high back pressure and represent a breakthrough in versatility.
blows/
Impact rate at 30 l/min 1680 1680 2300
min
EHTMA class C/D C/D C
1801 4040 02 1801 4050 02 KAPD-23
Price: $2700 $2700 $1935
Description Universal Adaptor—2 1/2 Round Adaptor—3 3/4” x 6” Square Adaptor 2-1/8"
Part Number 3371 8060 33 3371 8060 34 3371 8060 32
Price $42.44 $42.44 $42.44
888-883-5144 CROWDERHYDRAULICTOOLS.COM 5
888-883-5144
6
The post puller is used by road-maintenance contractors to repair barriers. With hardened jaws and automatic chain
tightening clamp, the Atlas Copco post puller is ideal for removing all kinds of wooden or steel posts including IPE,
HPE, and UPE profiles, plus round/square steel tubes. A built-in hand lever gives a total pulling force of up to 10 tons.
Weight lb 60
Price $3315
Speed Auger
Weight Oil Working of Size at
Part without flow pressure Torque rotation L=870 EHTMA
Number Description auger (gpm) (psi) (Nm) (rpm) (inch) class Price
1806 1014 33 LPHB Posthole 44 20-40 1450-2030 232.33 90-188 3,5-13,8 C/D/E $1580
Borer
6 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
7
Blows/
Impact Rate 2300
min
Price: $1785
EHTMA class C
Price: $4450
888-883-5144 CROWDERHYDRAULICTOOLS.COM 7
888-883-5144
8
These powerful, light and compact saws can be used to cut through concrete, asphalt and steel. Their simple
hydraulic design with direct drive reduces maintenance, especially in comparison with belt-driven saws. They are
easy to use thanks to the open cutting face, even under the most demanding conditions. With a lightweight cart you
can use the saws for floor, road and other light surface jobs.
LS 14 LS 16
TECHNICAL DATA
Length Speed of
Weight Oil flow without drill Working rotation Drill EHTMA
Part Number Description (lb) (gpm) (inch) pressure (psi) (rpm) diameter (in) class Price
1806 1014 38 LCD 500 21 5.3 16 1160-2500 600-900 3-8 C/D $2905
1806 1014 39 LCD 1500 20 5.3 16 1160-2500 1500-2250 2-4 C/D $2905
Hydraulic Pumps
Lightweight and compact submersible discharge pumps are used in a wide range of
applications. These include continuous pumping of clean or contaminated water on
building sites, in flooded excavations and cellars.
TECHNICAL DATA
Oil Working Pump Solid
Part Description flow pressure head Pump flow handling EHTMA
Number Weight (gpm) (psi) max (ft) max (gps) up to (inch) class Price
1806 1014 34 LWP 2 24 5-7 2320 82 3.7 3/8 C $1785
1806 1014 35 LTP 3 29 7-10 2495 104 8.5 2 1/2 D $4130
Parts Breakdown on our web site, crowderhydraulictools.com
8 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
9
Page 10 Page 14
Page 12
PICK HAMMER
CHIPPING HAMMER RIVET BUSTER
Page 15 Page 16
Page 17
888-883-5144 CROWDERHYDRAULICTOOLS.COM 9
888-883-5144
10
Simplicity of design means fewer parts, less hassle, easier on-site service and maintenance and therefore less down–
time. Good news for everyone who buys, rents, or operates our machines. When we first introduced the TEX range
we raised the bar for the industry and it became a global leader. And still is. The most recent additions to the TEX
range include new design features that live up to the TEX breakers’ reputation for excellent handling, performance
and reliability. Simplicity, in the design and the function of the eight most recent models – TEX 140 - 280, sets a new
standard for pneumatic breakers – again! In each series, and in some cases also between the
series, TEX breakers have many common parts. This helps you keep your parts stock to a
minimum. They not only share parts, but they have a lot more in common:
Valve parts of glass-fiber reinforced polymer eliminate corrosion problems When the
machines are running offload, the piston turns on air-cushions at either end of the cylinder,
virtually eliminating metal-to-metal contact and reducing vibrations and wear
Streamlined silencer profile does not obscure the chisel and work-piece from the operator
Low center of gravity gives good balance, considerably reducing operator fatigue
Design eliminates need for side bolts
Unique swivel coupling, which rotates even when pressurized, makes the TEX breakers
easier to maneuver.
Silenced Breakers
Impact
Shank Size Weight Length Air Consumption Frequency
Part Number Description (inch) (lb) (in) (cfm) (blows/min) Price
AC-8461022334 TEX 140 PS US 1 x 4 1/4 34 27 1/4 53 1530 $930
AC-8461022432 TEX 180 PS 1 1/8 x 6 43 25 3/8 55 1500 $1050
AC-8461022434 TEX 180 PS US 1 x 4 1/4 43 25 3/8 55 1500 $1050
AC-8461022532 TEX 220 PS 1 1/8 x 6 52 26 1/4 63 1320 $1120
AC-8461022533 TEX 220 PS 1 1/4 x 6 52 26 1/4 63 1320 $1120
AC-8461022630 TEX 270 PS 1 1/8 x 6 62 27 1/4 68 1230 $1165
AC-8461022631 TEX 270 PS 1 1/4 x 6 62 27 1/4 68 1230 $165
AC-8461022720 TEX P60 (non-silenced) 1 1/8 x 6 75 76 27 1500 $950
AC-8461022721 TEX P60 (non-silenced) 1 1/4 x 6 77 76 27 1500 $950
AC-8461022722 TEX P60 1 1/8 x 6 79 76 27 1500 $1075
AC-8461022723 TEX P60 1 1/4 x 6 80 76 27 1500 $1075
AC-8461022820 TEX P90 (non-silenced) 1 1/8 x 6 97 85 28 1260 $1025
AC-8461022821 TEX P90 (non-silenced) 1 1/4 x 6 97 85 28 1260 $1025
AC-8461022822 TEX P90 1 1/8 x 6 101 85 28 1260 $1150
AC-8461022823 TEX P90 1 1/4 x 6 101 85 28 1260 $1150
3310145861 ERGO Kit for TEX 140 and 180—Complete kit for converting to a vibration dampened breaker $460
3310145860 ERGO Kit for TEX 220 and 270—Complete kit for converting to a vibration dampened breaker $475
10 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
11
TEX 21,
33 and
40 PE
Tex 190-280 PE Pneumatic
Pneumatic
Breaker
Breakers
888-883-5144 CROWDERHYDRAULICTOOLS.COM 11
888-883-5144
12
Light and easy to handle, BBD Rock Drills are ideal for those quick jobs and for working in difficult-to-get-to areas.
They can be equipped with either D- or T-handles. The ratchet-wheel action provides faster rotation and higher
impact frequency for drilling in soft to medium hard rock. RH Drills are designed for heavier jobs such as bench and
secondary drilling, plus drilling for smooth blasting. RH drills have a robust rifle-bar rotation mechanism and high
impact energy for drilling in hard rock.
TECHNICAL DATA
Impact
Freq. Rotation Penetration
Shank Size Weight Length Air (blows/ Speed Rate
Part Number Description (in.) (lbs) (in) (cfm) min) (rpm) (in) Price
8311 0102 47 BBD 12D 3/4 X 4 1/4 22 22 1/4 51.1 2580 220 10 $1950
8311 0102 80 BBD 12DS 3/4 X 4 1/4 24 22 1/4 46.9 2520 220 8 $2045
8311 0102 95 BBD 12-T01 7/8 X 4 1/4 24 20 51.1 2580 220 6 $1950
8311 0102 98 BBD 12TS-01 7/8 X 4 1/4 27 20 46.9 2520 220 6 $2130
8311 0302 86 RH 658L 7/8 X 4 1/4 53 22 1/4 123.5 2040 215 16 3/4 $1950
8311 0302 89 RH 658L 1 X 4 1/4 53 22 1/4 123.5 2040 215 16 3/4 $1950
8311 0302 87 RH 658LS 7/8 X 4 1/4 55 22 1/4 123.5 2040 215 16 $2020
8311 0104 02 BBD 15E 3/4 X 4 1/4 34 22 3/4 47 2520 220 8 3/4 $2515
8311 0104 09 BBD 15E 7/8 X 3 1/4 34 22 3/4 47 2520 220 8 3/4 $2515
8311 0104 10 BBD 15E 7/8 X 4 1/4 34 22 3/4 47 2520 220 8 3/4 $2515
8311 0104 13 BBD 15ET 7/8 X 4 1/4 34 22 3/4 47 2520 220 8 3/4 $2515
12 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
13
888-883-5144 CROWDERHYDRAULICTOOLS.COM 13
888-883-5144
14
TECHNICAL DATA
Rock Drill Stroke
Air Consumption Piston Bore Length Impact Rate Length Weight
Part Number Description (cfm) (in.) (in.) (blows/min) (in.) (lbs) Price
8311 0202 03 BBD 46WS-6 Silenced 190 3 1-3/4 3000 86-25/32 86 $4020
8311 0202 11 BBD 46WS-8 Silenced 190 3 1-3/4 3000 103-1/3 88 $4020
8311 0202 29 BBD 46WR-6 190 3 1-3/4 3000 86-25/32 86 $4020
8311 0202 37 BBD 46WR-8 190 3 1-3/4 3000 103-1/3 88 $4020
8311 0401 10 BBC 16W 146 2-3/4 2-5/32 2340 28 63 $3825
8311 0408 05 BBC 34W 187 3-1/8 2-3/4 2280 30-1/2 74 $4350
8311 0303 47 BBC 34WS Silenced 187 3-1/8 2-3/4 2280 30-1/2 76 $6775
8311 0408 06 BBC 34 DSI 187 3-1/8 2-3/4 2280 30-1/2 68 $4500
8311 0206 09 BBD 94W 206 3-17/32 1-3/4 3300 26-3/8 62 $3480
8311 0206 10 BBD 94 DSI 206 3-17/32 1-3/4 3300 26-3/8 62 $3480
8311 0303 45 RH 656W 102 2-17/32 2-5/16 2040 26 49 $2100
PUSHER LEG DATA
Part Number Description Suitable for Piston Bore Feeding Length Length Weight Price
Rock Drill (in.) Length Retracted Extracted (lbs.)
(in) (in.) (in.)
8321 0301 01 BMT 51 BBC 16W 2-11/32 51-5/32 65-1/4 116-7/16 33 $1275
8321 0201 94 ALF 71 BBC 16W, 34W 2-3/4 51-5/32 17-1/32 122-7/32 31 $1315
8321 0201 95 ALF 71-1 BBC 16W, 34W 2-3/4 37-3/8 57-1/4 94-21/32 29 $1315
8321 0201 80 ALF 72D BBD 94W 2-3/4 51-5/32 77-17/32 128-23/32 42 $1650
8321 0201 81 ALF 72D-1 BBD 94W 2-3/4 47-7/32 72-1/32 119-9/32 35 $1650
8321 0102 02 BMK 62S RH 656W 2-1/16 51-5/32 71-7/16 122-5/8 38 $900
DOUBLE TELESCOPE
8321 0201 85 ALF 67/80 BBC 16W, 34W 3-1/8 73 58-27/32 131-7/8 38 $1650
8321 0201 69 ALF 67/80D BBD 94 3-1/8 73 62-25/32 135-13/16 42 $2040
14 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
15
The TEX 10 pick hammer is a light, compact all-rounder that you’ll really
appreciate having around when you need a heavy hitter. With its long piston
stroke and relatively low frequency, you can work quickly and effectively in
concrete, hard brick and other hard materials.
...High performance/weight ratio Operators like the TEX 10 because it’s easy
to handle. It weighs just 10 kg and at 500 mm is comparatively short. Add to this
the high impact energy, and you have a tool that in relation to its size and
weight, hits surprisingly hard. This is especially true if you compare it with an
electric tool of the same weight class: pneumatic hammers are known to deliver
significantly more hitting power – sometimes as much as 100 per cent more.
...Proven design. Wide range of choices The design of the TEX 10 is the result of many years of tough
work experience. The pick hammer is available in three versions and with two different shanks. Two of
the versions have traditional hexagonal shanks and can be used in a wide range of applications. The
PSR version, with its round shank, has an unguided, free-rotating chisel which facilitates work such as
removing refractory brick.
TECHNICAL DATA
Impact
Shank Size Weight Length Air Cons Frequency Tool
Part Number Description (in.) (lbs) (in) (cfm) (blows/min) Retainer Version Price
888-883-5144 CROWDERHYDRAULICTOOLS.COM 15
888-883-5144
16
TECHNICAL DATA
Air
Shank Size Weight Length Consumption Impact Frequency
Part Number Description (in.) (lbs) (in) (cfm) (blows/min) Price
16 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
17
Impact Rate
(blows/min)
1200 1200 1140 1140 850 850
888-883-5144 CROWDERHYDRAULICTOOLS.COM 17
888-883-5144
18
The ergonomic long reach scaler reduces time consuming hand scraping and back
breaking labor; it is economical to use, consuming only 7 cfm, and can operate from a
small portable compressor.
Part No Air Pressure Ejector Air Suction Filter Area Weight Suction Price
Max Requirement Capacity (ft2) (lbs) Hose
(psi) (cfm) cfm) (in)
8092 0407 84 100 20 100 14 48.4 1-1/2 $3130
3217 0578 91 25 Bags $85.00
Safety and Operating Instruction as well as Parts Breakdowns are available for all tools shown
here on our website, www.crowderhydraulics.com
18 888-883-5144 CROWDERHYDRAULICTOOLS.COM
888-883-5144
PNEUMATIC
CONSTRUCTION
TOOLS
Construction Tools
Complete Line of
Pneumatic Equipment
Complete Spec Sheets and
Parts Breakdowns on our
website:
crowderairtools.com
888-883-5144 CROWDERAIRTOOLS.COM
888-883-5144
2
The APT Model 109 and Model 115 are Models 137 and 155 are used in general construction,
lightweight tools for drilling holes for anchor bolts utility work, and plant maintenance. They are designed for
and small dowel hole drilling. These versatile tools drilling through granite, hard faced rock, quarry drilling and
have a stop rotation feature that converts them drilling secondary holes for blasting. They are also used
from a drilling tool to a percussion tool for light with dowel hole drilling machines. Adaptable to wet drilling
chipping in horizontal and overhead work. application by attaching APT valve, wet tube and swivel
assembly.
2 888-883-5144 CROWDERAIRTOOLS.COM
888-883-5144
3
CFM
Part Chuck Size Weight Length Air Inlet
Model Bore Stroke B.P.M. @ 90 psi Price
No. In. lbs. Inches NPT
inlet press.
118 5201 7/8 x 3-1/4 1-3/4 3-3/8 1850 34-36 31 22-1/2 3/8 male $885
5202 1 x 4-1/4 1-3/4 3-3/8 1850 34-36 31 22-1/2 3/8 male $885
119 5203 7/8 x 3-1/4 1-3/4 3-3/8 1850 34-38 37 31 1/2 female $1000
125 5209 3/4 sq. x 2-3/4 1-11/16 2-3/4 2120 38-42 21 18-3/8 3/8 female $875
5210 7/8 hex x 2-3/4 1-11/16 2-3/4 2120 38-42 21 18-3/8 3/8 female $875
5211 7/8 hex x 3-1/4 1-11/16 2-3/4 2120 38-42 21 18-3/8 3/8 female $875
18295 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger) $78.51
16889 Whip Hose Assembly— UF, 6’ x 1/2” Hose with 1/2” NPT Male Swivel $42.83
16891 Whip Hose Assembly—UF, 1L, 6’ x 1/2” Hose with 1/2” NPT Swivel $90.70
16893 Whip Hose Assembly—UF, 2L, 6’ x 1/2” Hose with 1/2” NPT Male Swivel $105.84
888-883-5144 CROWDERAIRTOOLS.COM 3
888-883-5144
4
CFM
Part Chuck Size Weight Length Air Inlet
Model Bore Stroke B.P.M. @ 90 psi Price
No. In. lbs. Inches NPT
inlet press.
140A 18041 1x4-1/4 1-7/8 4-1/4 1500 48 46 24 1/2 male $1150
18099 Muffler for 140A Paving Breaker $141.78
18301 Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) 57.67
18299 Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) 99.18
160A 17746 1-1/8x6 2-1/4 4-1/8 1680 60-65 70 28-1/4 1/2 male $1210
17747 1-1/4x6 2-1/4 4-1/8 1680 60-65 70 28-1/4 1/2 male $1210
17752 Muffler for 160A Paving Breaker $141.78
18296 Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) 85.72
18298 Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) 54.85
190A 18618 1-1/8x6 2-5/8 6-1/8 1350 75-80 90 31 3/4 male $1265
18619 1-1/4x6 2-5/8 6-1/8 1350 75-80 90 31 3/4 male $1265
17753 Muffler for 190A Paving Breaker $141.78
18296 Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) 85.72
18581 Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) 70.71
4 888-883-5144 CROWDERAIRTOOLS.COM
888-883-5144
5
Automatic valves
Drop forged alloy steel handle Swivel hose connection
Built-in automatic oiler Noise dampening mufflers available
Rubber handle grips Four-bolt back head
Replaceable chuck bushing (except for Model
CFM
Part Chuck Size @ 90 psi Weight Length Air Inlet
Model No. In. Bore Stroke B.P.M. inlet press. lbs. Inches NPT Price
117 5199 7/8 x 3-1/4 1-3/4 3-3/8 1850 34-38 33 21-3/4 3/8 male $850
5200 1 x 4-1/4 1-3/4 3-3/8 1850 34-38 33 21-3/4 3/8 male $850
6465 Muffler Kit for 117 $92.30
18295 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 78.51
140 17923 1 x 4-1/4 1-7/8 4-1/4 1500 48 43 21-1/8 1/2 male $905
18099 Muffler Kit for 140 $141.78
18301 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 57.67
18299 Side Rod Kit (includes: Bolt, Spring, Washer and Nut) 99.18
160 5235 1-1/8 x 6 2-1/4 4-1/8 1680 60-65 68 25-3/4 1/2 male $945
5236 1-1/4 x 6 2-1/4 4-1/8 1680 60-65 68 25-3/4 1/2 male $945
17752 Muffler Kit for 160 $141.78
18296 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 85.72
18298 Side Rod Kit (includes: Bolt, Spring, Washer and Nut) 54.85
190 5239 1-1/8 x 6 2-5/8 6-1/8 1350 75-80 93 29 3/4 male $995
5240 1-1/4 x 6 2-5/8 6-1/8 1350 75-80 93 29 3/4 male $995
17753 Muffler Kit for 190 $141.78
18296 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 85.72
18581 Side Rod Kit (includes: Bolt, Spring, Washer and Nut) 70.71
888-883-5144 CROWDERAIRTOOLS.COM 5
888-883-5144
6
Rivet Busters
The APT model 133 Rivet Buster was originally designed to cut rivets off metal structures. Today the Rivet Buster
series is widely known for its tough, powerful tools. They have the ability to perform all types of medium to heavy
demolition work. With half the weight of the 60 lb. class paving breakers, the ratio of their high impact energy versus
their weight make them the most efficient tool APT makes. The model 133 meets the weight requirements for bridge
deck repair work, and are also popular for cutting up underground tanks. Rivet Busters are offered in 8" and 11"
stroke. The Model 133 also comes in a 4-bolt style handle which incorporates a vibration dampening feature. APT
also has an outside trigger model that has a safety feature to minimize the possibility of being accidentally activated.
The APT Model 633 Rivet Buster measures only 20 5/8” in length, delivering more power to those tight spaces.
Weighing just 28 lbs., it’s perfect for limited access work or whenever a compact, light weight and powerful tool fits
the bill. This tool features an innovative cylinder design that reduces overall weight without compromising tool
strength or hitting force.
CFM
Part Weight Length Air Inlet
Model Bore Stroke B.P.M. @ 90 psi Price
No. lbs. Inches NPT
inlet press.
ACCESSORIES
18741 Retainer Kit (includes: Spring, Bumper, Upper and Lower Sleeves) $26.67
16891 Whip Hose Assembly—UF, 1L, 6’ x 1/2” Hose with 1/2” NPT Swivel and Oiler $90.70
16892 Whip Hose Assembly—UF, 2L, 6’ x 1/2” Hose with 1/2” NPT Swivel and Oiler $108.73
6 888-883-5144 CROWDERAIRTOOLS.COM
888-883-5144
7
Flapper valve design allows dirt to pass without stopping the tool
Deep case-hardened alloy steel cylinders
Drop-forged handles
Replaceable bushings
Adjustable exhaust deflector
Choice of optional retainers including the APT latch-type
Price includes oval retainer, locking spring, 3/8 NPT inlet bushing, and Whip Hose Assembly—UF,
1/2" Hose x 6' with 1/2" NPT Swivel
888-883-5144 CROWDERAIRTOOLS.COM 7
888-883-5144
8
Standard Features:
Backfill Tampers
Model 131 Features
Built-in large automatic oiler Internally reinforced large 5-3/4" malleable iron
Flapper valve design allows dirt to pass without butt (standard)
stopping the tool Pole (half-moon), and 3" diameter butts available
The Model 131 Backfill Tamper is used for soil compaction, temporary filling of holes, asphalt packing,
etc. Applications range from foundation and pavement repair to the installation of power or telephone
poles. APT offers an optional half-moon shaped pole tamping accessory for compaction around a pole as
well as a 3" diameter butt for confined space compaction.
CFM
Part Weight Length Air Inlet
Model Bore Stroke B.P.M. @ 90 psi Price
No. lbs. Inches NPT
inlet press.
131 5214 1-1/2 5-1/2 670 38-42 37 51-7/8 1/2 female $855
ACCESSORIES
16889 Whip Hose Assembly—UF, 6’ x 1/2” Hose with 1/2” NPT Male Swivel $42.83
16893 Whip Hose Assembly—UF, 2L, 6’ x 1/2” Hose with 1/2” NPT Male Swivel $105.84
8 888-883-5144 CROWDERAIRTOOLS.COM
CROWDERPNEUMATICS.COM
888-883-5144
888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
888-883-5144
2
2 888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
888-883-5144
3
888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 3
888-883-5144
4
Choosing A Driver
1. WHAT ARE THE TYPES AND SIZES OF THE POSTS YOU ARE GOING TO DRIVE?
Select a post or posts from the following chart. The charts also indicates which post driver
with proper chuck adapter is capable of driving the post or posts you selected. You may be
able to select only one driver for all the posts you want to drive. If that driver does not
meet all your driving needs, you may need to select an additional driver with proper chuck
adapter.
(Example: Let’s say you wish to drive a 1 5/8" line post, a 2" post, a 3" post, and a 4" x 6"
H column guardrail post. The model PD-140 will drive all your posts. The PD-140 weighs
140 lbs and unless you plan to use lifting equipment or have very hard driving conditions,
a PD-55 is more appropriate for the smaller posts while a PD-140 would be required for
the 4" x 6" H column posts.
(Example: A PD-55 will easily drive a 2" post three feet deep, but if you plan to drive the 2" posts ten to fifteen feet
deep, for soil stabilization, you should probably use a PD-110.)
3. INTO WHAT TYPE OF SOIL ARE YOU GOING TO DRIVE THE POSTS?
The chart assumes you are going to drive the posts into moist, light or medium weight soils. When driving a post, the
soil has to have somewhere to go, so it is compacted beside the post, making for a very firmly set post. The heavier
the soil, the fewer voids there are for the displaced soil to be compacted into. If the soil is heavy, compacted, and/or
dry, it will be harder to drive the post and you may need the next larger post driver to drive the post.
Note: If the soils you are driving into are dry, you can reduce driving times dramatically by wetting the ground
where you are going to drive the post. It doesn’t take a lot of water and it helps if you water the driving area
occasionally while driving the post. You cannot drive posts in all conditions, for instance solid granite. Normally, the
post hole is drilled in rock. Then the post is grouted in. If you are placing T posts in rock you can drill a smaller hole.
Then drive the T post into it with a Rhino driver. It is much faster to drill a 1" hole than a 2" hole.
4 888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
888-883-5144
5
4. ARE YOU GOING TO USE LIFTING EQUIPMENT FOR YOUR POST DRIVER?
If you are going to use lifting equipment to place your driver on top of the post, you should consider
buying the largest Rhino driver that will drive all the posts you intend to drive. A larger post driver will
drive your posts faster, give you maximum productivity and pay for the increased cost of the post driver
many times over.
If the PD-45 will drive a post in two minutes, the PD-39 and PD-55 will drive the same post in one
minute, the PD-110 will drive it in 30 seconds and the PD-140 will drive it in 15 seconds. These are not
exact times, but will provide a good estimate.
Throttle Valve Kit - Part No. 600000 - The throttle valve kit comes with a 2 foot hose whip which
accommodates a 7 foot post. Order the throttle valve kit with one foot additional hose for every foot of
post taller than 7 feet.
(Example: If your tallest post is 10 feet, order your throttle valve kit with 3 feet of extra hose on the hose
whip. You will be holding the throttle valve approximately 5 feet from the ground. The 2 feet of hose that
comes with the hose whip and the additional 3 feet, totaling 5 feet, will enable you to reach to 10 feet.
Filter-Regulator-Lubricator - Part No. 601128 - The filter-regulator-lubricator has three functions: The
filter traps dirt coming through the hose from the air compressor and helps to remove water from the air.
The regulator must be set at the proper air pressure recommended for your driver. (See Rhino literature,
form no. 118) Proper air pressure is required for the safety of the operator and others working with or
near the driver. The lubricator is needed so you can set it to drop 10 drops of oil per minute into the air
to the driver for proper lubrication. The filter-regulator-lubricator can be mounted on your air compressor
and used with other tools. If you are renting an air compressor or if the filter-regulator-lubricator will be
on the ground, you should order a carrier, part no. 225000, for carrying and ease of handling. The filter-
regulator-lubricator should not be more the 25 feet from the post driver during operation to achieve the
recommended lubrication.
Additional Accessories - Rhino suggests that you consider ordering anti-vibration gloves for your
operators and others working with the driver. You may also wish to consider ordering a hose reel and
extra air hose to use with your driver.
888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 5
888-883-5144
6
Choosing A Driver
Types & Sizes of Posts to be Driven PD-39 PD-39P PD-45 PD-55 PD-110 PD-140
Fiberglass T Posts X X X
1" Pipe X X X
1-5/8" Pipe X X X X X X
2" Pipe X X X X X
T Posts X X X X X X
Telespar Posts X X X X
C Posts X X X X
Rectangular Posts X X X X X
I Beams X X X X
(1) To drive the telespar breakaway bases close to the ground you will need to order a special driving cap.
(2) To drive the channel post breakaway bases close to the ground you will need to order a special driving cap.
(3) To drive 4" x 4" wood posts you will need 4" x 4" wood post chuck, part no. 70063, for your PD-140.
(4) To drive 4" x 6" h column guardrail posts you will need a 4" x 6" h column chuck, part no. 70061, and a 4" x 6" H
column driving cap, part no. 70062, for your PD-140.
(5) To drive 12" sheet piling you will need to order a special chuck and driving cap for your PD-140.
(6) To drive fabric attached silt fence, you will need to order the special silt fence chuck for your PD-45.
6 888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
888-883-5144
7
PD-39
Light Weight Medium Duty Post Driver with a 3-5/8" I.D.
1 70006 $2425
Master Chuck, uses 42 CFM @ 90PSI. Approx. Wt. 39 lbs.
Panel Post Driver with a 2-1/8" I.D. Master chuck, uses 42
2 70016 $2795
CFM @ 90PSI. Approx. Wt. 41 lbs.
3 70330 3" I.D. Chuck Adapter $145
4 70320 2-1/2" I.D. Chuck Adapter $145
5 70319 2" I.D. Chuck Adapter $145
6 70334 Channel Post Chuck Adapter - 3 to 4 lbs/ft Posts $145
7 70337 Channel Post Chuck Adapter - 2 to 2.75 lbs/ft Posts $145
8 70338 Channel Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts $145
PD-45
Light Duty Post Driver with a 3" I.D. Master Chuck, uses
1 70012 $1425
30 CFM @ 90PSI. Approx. Wt. 46 lbs.
2 70600 2-1/2" I.D. Chuck Adapter $155
3 70601 2" I.D. Chuck Adapter $155
4 70602 1-1/2" I.D. Chuck Adapter $155
5 70603 1" I.D. Chuck Adapter $155
6 70606 Channel Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts $155
PD-55
Medium Duty Post Driver with a 3-7/8" I.D. Master
1 70013 $1595
Chuck, uses 42 CFM @ 90PSI. Approx. Wt. 55 lbs.
2 70609 3-1/2" I.D. Chuck Adapter $165
3 70610 3" I.D. Chuck Adapter $165
4 70611 2-1/2" I.D. Chuck Adapter $165
5 70612 2" I.D. Chuck Adapter $165
6 70613 1-1/2" I.D. Chuck Adapter $165
7 70614 1" I.D. Chuck Adapter $165
8 70617 Channel Post Chuck Adapter - 1.2 to 1.5 lps/ft Posts $165
9 70618 Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts $165
10 70619 Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $165
PD-110
Medium/Heavy Duty Post Driver with a 4-1/4" I.D. Master
1 70014 $2450
Chuck. Shipping Weight 116 lbs.
2 70622 3-5/8" I.D. Chuck Adapter $175
3 70623 3" I.D. Chuck Adapter $175
4 70624 2-1/2" I.D. Chuck Adapter $175
5 70625 2" I.D. Chuck Adapter $175
6 70628 Channel Post Chuck Adapter - 1.2 to 1.5 lps/ft Posts $175
7 70629 Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts $175
8 70630 Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $175
888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 7
888-883-5144
8
PD-140
PD-200
Heavy Duty Post Driver with a 5-1/2" I.D. Master Chuck, uses 85
1 070745 $3150
CFM @ 120PSI. Approx. Wt. 205 lbs.
8 888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
888-883-5144
9
888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 9
888-883-5144
10
PD-55 PACKAGES
1 071269 Rhino PDT-55 Total Solution includes Transport Accessories as well as $4620
PD-55 Medium Duty Post Driver
PD-55 3" (76.2 mm) Chuck Adapter
PD-55 2-1/2" (63.5 mm) Chuck Adapter
PD-55 2" (50.8 mm) Chuck Adapter
PD-55 Channel Post Chuck Adapter
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator and 15 ft. of Hose
MP-3 Manual Post Puller (includes Post Grabber and Chain)
* Note: Chuck adapter selection is customizable.
2 071216 Rhino PDT-55 Transport Kit includes Transport Accessories as well as $3650
PD-55 Medium Duty Post Driver
PD-55 3" (76.2 mm) Chuck Adapter
PD-55 2-1/2" (63.5 mm) Chuck Adapter
PD-55 2" (50.8 mm) Chuck Adapter
PD-55 Channel Post Chuck Adapter
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator and 15 ft. of Hose
* Note: Chuck adapter selection is customizable.
3 071277 Rhino PD-55 Utility Kit includes PD-55 Medium Duty Post Driver & Hard Hat $4280
1 Chuck Adapter (Size to be Specified by Customer)
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator with Carrier and 15 ft. of Hose
MP-3 Manual Post Puller (includes Post Grabber and Chain)
Air Hose Reel with 100' Hose
4 071273 Rhino PD-55 Economy Kit includes PD-55 Medium Duty Post Driver & Hard Hat $2425
1 Chuck Adapter (Size to be Specified by Customer)
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator with Carrier and 15 ft. of Hose
10 888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
888-883-5144
11
PD-110 PACKAGES
1 071270 Rhino PDT-110 Total Solution includes Transport Accessories as well as $5195
PD-110 3-5/8" (92 mm) Chuck Adapter
PD-110 2-1/2" (63.5 mm) Chuck Adapter
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator and 15 ft. of Hose
MP-3 Manual Post Puller (includes Post Grabber and Chain)
* Note: Chuck adapter selection is customizable.
2 071217 Rhino PDT-110 Transport Kit includes Transport Accessories as well as $4225
PD-110 3" (76.2 mm) Chuck Adapter
PD-110 Channel Post Chuck Adapter
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator with Carrier and 15 ft. of Hose
* Note: Chuck adapter selection is customizable.
3 071278 Rhino PD-110 Utility Kit includes PD-110 Medium/Heavy Duty Post Driver & Hard Hat $5125
1 Chuck Adapter (Size to be Specified by Customer)
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator with Carrier and 15 ft. of Hose
MP-3 Manual Post Puller (includes Post Grabber and Chain)
Air Hose Reel with 100' Hose
4 071274 Rhino PD-110 Economy Kit includes PD-110 Medium/Heavy Duty Post Driver & Hard Hat $3320
1 Chuck Adapter (Size to be Specified by Customer)
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator with Carrier and 15 ft. of Hose
PD-140 PACKAGES
1 071271 Rhino PDT-140 Total Solution includes Transport Accessories as well as $5370
PD-140 3-5/8" (92 mm) Chuck Adapter
PD-140 3" (76.2 mm) Chuck Adapter
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator and 15 ft. of Hose
MP-3 Manual Post Puller (includes Post Grabber and Chain)
* Note: Chuck adapter selection is customizable.
2 071218 Rhino PDT-140 Transport Kit includes Transport Accessories as well as $4400
PD-140 3" (76.2 mm) Chuck Adapter
PD-140 Channel Post Chuck Adapter
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator and 15 ft. of Hose
* Note: Chuck adapter selection is customizable.
3 071279 Rhino PD-140 Utility Kit includes PD-140 Heavy Duty Post Driver & Hard Hat $5310
1 Chuck Adapter (Size to be Specified by Customer)
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator with Carrier and 15 ft. of Hose
MP-3 Manual Post Puller (includes Post Grabber and Chain)
Air Hose Reel with 100' Hose
4 071275 Rhino PD-140 Economy Kit includes PD-140 Heavy Duty Post Driver & Hard Hat $3500
1 Chuck Adapter (Size to be Specified by Customer)
Throttle Valve Kit with 5 ft. of Hose
Filter-Regulator-Lubricator with Carrier and 15 ft. of Hose
888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 11
888-883-5144
12
Post Pullers
Crowder Supply carries the Rhino line of both Manual and Hydraulic Post Pullers.
12 888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
888-883-5144
13
Post Pullers
“The Low Cost Answer for Pulling Posts”
PL-3
MP-3
888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 13
888-883-5144
14
14 888-883-5144 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM
HIGH VELOCITY JET FANS AIR MOVERS AIR MANIFOLDS / TANKS FOUNDRY TOOLS
ROCK DRILLS
888-883-5144 USA-AIRTOOLS.COM
2
2 888-883-5144 USA-AIRTOOLS.COM
3
SWING GATE
Part No. Descrip- Flange Weight Water Air Water Avg. Water Air Flow Water Avg. Price
tion Dia. (lb) Pres- Flow Cons Rpm Pres- (Free Cons RPM
(in) sure (Free (gal/ sure Flow) (gal/
(psi) Flow) min) (psi) min)
TXWD12 12" 18 56 100 3463 160 4366 100 2245 106 2827 $3,675
Water 125 3845 182 4857 125 2815 134 3552
Driven 150 4096 193 5185 150 3269 155 4097
TXWD16 16" 22 69 100 4479 156 2585 100 3455 125 1981
Water 125 5567 190 3214 125 4329 153 4491
Driven 150 6119 209 3532 150 5029 174 2900 $4,200
Fan
Accessories
TXJFRF Jet Fan Refurbishing Kit $776.53
TXJFRK Jet Fan Repair Kit $361.91
888-883-5144 USA-AIRTOOLS.COM 3
4
AIR DUCTING
Our air ducting (TX-SAC-N-GO) is available in three sizes, 8", 12" and 16" diameters. The ducting is made of
single-ply PVC coated polyester fabric with a spring steel wire helix and external PVC wear strip. The ducting
has its own storage bag attached to the cuff end. Simply attach the cuff
end to the air movement device and pull the opposite end from the bag
and place into position. When finished, the hose can easily be put back
into the bag for storage and carrying. Our design allows multiple bags to
be combined for long duct runs. No additional connectors are needed.
The end of one hose can be inserted into the cuff end of another. All
ducting can be placed on either end of an air mover for fan. The hose
can be used for supply or suction.
The TX-SAC-N-GO-8 is designed to be used with the TX-3AM and
TX-3AMS.
The TX-SAC-N-GO-12 is designed to be used with the TX-6AM or the
new TX-JF12 Jet Fan
The TX-SAC-N-GO-18 is designed to be used with the TX-8AM, TX-10AM or the new TX-JF16 Jet Fan.
4 888-883-5144 USA-AIRTOOLS.COM
5
Part No Description Inside Overall Outside Dia. at NPT Bolt Base Weight Price
Dia. of Length Dia. of top of Size Circle Slot (lb)
Base (in) Base Horn (in) Dia. Dia.
(in) (in) (in) (in) (in)
TX3AM 3" Air Mover 3 16.75 7.31 6.0 1/2 6.56 0.4 5.5 $250.00
TX3AMS 3" Air Mover 3 30.5 7.31 7.0 1/2 6.56 0.4 8.5 $235.00
Short
TX3AMSH 3" Air Mover w/ 3 16.75 7.31 6.0 1/2 6.56 0.4 5.5 $430.00
Stainless Steel
Horn
TP-AM15 Cone for TX3AM Air Mover $119.02
TX6AM 6" Air Mover 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $310.00
TX6AMP 6" Air Mover w/ 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $310.00
Plastic Horn
TX6AMSH 6" Air Mover w/ 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $415.00
Stainless Steel
Horn
TX6AMS 6" Air Mover - All 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $710.00
Stainless Steel
TP-AM16 Cone for TX6AM Air Mover $140.68
TX8AM 8" Air Mover 8 46.06 14.37 14.25 1 13.62 0.5 36.0 $515.00
TP-AM17 Cone for TX8AM Air Mover $162.31
TX10AM 10" Air Mover 10 48.0 17.0 15.75 1 15.5 1.0 42.1 $770.00
TP-AM21 Cone for TX10AM Air Mover $204.61
TP-AM29 Grounding Clamp with 6’ wire $11.81
AMIS30 Air Mover Stand $500.00
888-883-5144 USA-AIRTOOLS.COM 5
6
VAM3S/S VAM3S Air Mister with Stand 1182 cfm 62 cfm 32 17 $840.00
VAM3S VAM3S Air Mister without Stand 1182 cfm 62 cfm 7 17 $605.00
VAM3/S VAM3 Air Mister with Stand 1462 cfm 62 cfm 35 31 $840.00
VAM3 VAM3 Air Mister without Stand 1462 cfm 62 cfm 9 31 $605.00
VAM6/S VAM6 Air Mister with Stand 3347 cfm 124 cfm 49 45 $945.00
VAM6 VAM6 Air Mister without Stand 3347 cfm 124 cfm 24 45 $815.00
VAM8/S VAM8 Air Mister with Stand 4929 cfm 193 cfm 62 47 $1,050.00
VAM8 VAM8 Air Mister without Stand 4929 cfm 193 cfm 37 47 $920.00
VAM10/S VAM10 Air Mister with Stand 7304 cfm 274 cfm 69 50 $1,155.00
VAM10 VAM10 Air Mister without Stand 7304 cfm 274 cfm 44 50 $1,025.00
6 888-883-5144 USA-AIRTOOLS.COM
7
AIR MANIFOLDS
The Texas Pneumatic Air Manifold can be used in any industry where
there is a need to have multiple outlets of air to supply various pneu-
matic tool simultaneously. The manifold comes with a 1-1/2" air inlet
and can be dispersed through and up to six separate 3/4" Chicago cou-
plings. Each outlet is regulated by a bronze safety lock on/off self-
relieving ball valve.
Part No. Description Weight Height Diameter Inlet Size No. of Price
(lb) (in) (in) (in) Outlets
Water filters (particulate filters) produce clean, dry air at the tool
preventing rust and clogging which reduces downtime of tools and
saves money
Conveniently manufactured to save you time
Cage protects valves and makes it easy to roll around
Ball valves control the number of outlets available
Pressure relief valve provides protection against excessive pres-
sure buildup
Part No. Description Weight Height Diameter Inlet Size No. of Price
(lb) (in) (in) (in) Outlets
888-883-5144 USA-AIRTOOLS.COM 7
8
Part No. Description Weight Height Length Tank Tank Width Inlet No of Work Capacity Price
(lb) (in) (in) Dia. Cir. (in) Size Outlets Pressure (gal)
(in) (in) (in) (psi)
TX3AMF- TX-3AMF Air Manifold with 1/2" 21-23 12 20 8 25.75 14 1 4 200 2.5 $590
Quick Connect
QC500
TX3AMF- TX-3AMF Air Manifold 21-23 12 20 8 25.75 14 1 4 200 2.5 $590
QC250 with 1/4" Quick Connect
TX3AMF- TX-3AMF Air Manifold with 3/8" 21-23 12 20 8 25.75 14 1 4 200 2.5 $590
Quick Connect
QC375
TX4AMF TX-4AMF Air Manifold 115 27 46 16 50.5 36 2 8 200 30 $1,360
TX5AMF TX-5AMF Air Manifold 193 32 60 20 63.5 39 2 8 200 60 $1,600
TX750FRDD Paint Spray Air Filtering System CALL
8 888-883-5144 USA-AIRTOOLS.COM
9
FOUNDRY TOOLS
Bench Rammer, Sand Rammer and
Backfill Tamper
The Texas Pneumatic rammers are proven in the field. They have a smooth-finished, black-
oxided body. They are tough, yet easy to handle. These rammers can be used in various applica-
tions for foundry purposes, as well as construction-related areas.
Made in USA
High performance with minimum operator fatigue
Easy start and stop features
Lightweight rugged construction
Adjustable packing gland
Fast hitting
Greatly improves the quality of casting in all types of
foundry applications
Tool Applications
Packing Sand
Packing plastic alumnea in fire walls
Packing cast stone
Part No Description Air Stroke Weight Bore BPM Taper Inlet Min OAL Price
Cons. (in) (lbs) (in) Hose Incl.
(cfm) Size Butt
(in) (in)
TX00 Sand Rammer 12 2 4 .7 1600 401 3/8 $320
TX70B Sand Rammer 15 2 6-8oz 1 1500 802 1/4" 3/8 16 $415
NPT
TX70RBK Repair Kit $89.36
TX8-2.5 Bench Rammer 13 2-1/2 7 1 1725 802 3/8 1/2 16-1/2 $525
TX8-4 Bench Rammer 19 4 10 1 1240 802 3/8 1/2 21-1/2 $720
TX6TN Backfill Tamper 38.5 5.5 40 1.5 800 804 1/2 - - $925
TX9HW Hose Whip Assembly $61.32
888-883-5144 USA-AIRTOOLS.COM 9
10
PAVING BREAKERS
Paving Breakers
The 90# Paving Breaker is designed for big jobs such as heavy demolition and
concrete breaking. The 60# Paving Breaker is a versatile, hard-hitting tool
that can be used for medium to heavy demolition work and concrete breaking,
and is the perfect all around breaker. The 40# and 30# Paving Breaker is a
rugged, yet lightweight paving breaker designed for light to medium construc-
tion work. It is ideally suited for plant maintenance work such as light demoli-
tion of floors, pavement, frozen ground and masonry walls and is very popular
for bridge deck work.
Thor Tools
Part No Description Weight Length Bore Stroke BPM Chuck Air Air Price
(lb) (in) (in) (in) Size (in) Inlet Cons
(NPT) (cfm)
TX30PB-7/8 30# Paving Breaker 34 22.5 1.75 3.375 1550 7/8x3-1/4 3/8 49 $1,040
TX30PB-1 30# Paving Breaker 34 22.5 1.75 3.375 1500 1x4-1/4 3/8 49 $1,040
TX40PBE 40# Paving Breaker 42 25.125 1.73 5.75 900 1x4-1/4 1/2x3 56 $1,140
/4
TX60PB-1-1/4 60# Paving Breaker 67 25.625 2.25 4.0937 1400 1-1/4x6 3/4 59 $1,155
TX60PB-1-1/8 60# Paving Breaker 67 25.625 2.25 4.0937 1400 1-1/8x6 3/4 59 $1,155
TX90PB-1-1/4 90# Paving Breaker 92.5 28.75 2.625 6.0625 1250 1-1/4x6 3/4 75 $1,255
TX90PB-1-1/8 90# Paving Breaker 92.5 28.75 2.625 6.0625 125 1-1/8x6 3/4 75 $1,255
The TX30CD comes in a chuck sizes of either 7/8" x 3-1/4" or 1" x 4-1/4". The proper
hose whip assembly for use with this tool is assembled with a TX1L lubricator. The tool
requires 49 cfm at 90 psi for most efficient operation, and the TX1L is capable of deliver-
ing 70 cfm through the lubricator. It will allow the 49 cfm to pass through the tool at 90
psi and when filled with a high quality lubricant, the tool is adequately lubricated as it
works.
Part No. Description Weight Length Bore Stroke BPM Chuck Air Air Price
(lb) (in) (in) (in) Size (in) Inlet Cons.
(NPT) (cfm)
TX30CD- Clay Digger 30 23 1.75 3.375 1550 7/8 x 3-1/4 3/8 49 $1,075
10 888-883-5144 USA-AIRTOOLS.COM
11
CHIPPING HAMMERS
Price includes a TX-4HW Hose Whip Assembly, 5oz. Line Oiler, and a 1291-TPT2
Deluxe Quick Change Retainer
Texas Pneumatic is proud to offer chipping hammers completely made in the USA. We will
guarantee the quality of this chipping hammer versus any chipping hammer in the world.
Part No. Description Bore Piston BPM Hose Overall Air Weight Price
(in) Stroke Size Length Cons (lb)
(in) (in) (in) (cfm)
Accessories
TX4HW Hose Whip Assembly $70.41
888-883-5144 USA-AIRTOOLS.COM 11
12
CHIPPING HAMMERS
With 2", 3" and 4" cylinder option, Texas Pneumatic offers a very complete range of chipping hammers
for all types of construction and industrial
applications.
Rocker valve assembly for less
maintenance
American quality forged steel handle
Three sizes: 2", 3" and 4" stroke pistons
Available with round or hex busing
High quality alloy steel barrel
Part No. Description Piston Piston BPM Hose Overall Air Weight Price
Dia. Stroke Size Length Cons (lb)
(in) (in) (in) (in) (cfm)
TXCH2-H Chipping Hammer - Hex 1-1/8 2 2100 1/2 16-1/4 32 15.7 $530.00
TXCH2-R Chipping Hammer - Rnd 1-1/8 2 2100 1/2 16-1/4 32 15.7 $530.00
TXCH3-H Chipping Hammer - Hex 1-1/8 3 1650 1/2 17-23/32 33 16.7 $530.00
TXCH3-R Chipping Hammer - Rnd 1-1/8 3 1650 1/2 17-23/32 33 16.7 $530.00
TXCH4-H Chipping Hammer - Hex 1-1/8 4 1375 1/2 19-7/32 34 18.1 $530.00
TXCH4-R Chipping Hammer - Rnd 1-1/8 4 1375 1/2 19-7/32 34 18.1 $530.00
Accessories
12 888-883-5144 USA-AIRTOOLS.COM
13
ROCK DRILLS
MADE IN USA
Rugged construction
Shipped with lubricator and hose whip assembly
Multiple chuck sizes
Air Consump- 36 56 56 98 98
tion (cfm)
888-883-5144 USA-AIRTOOLS.COM 13
14
Barrel cylinder has a bridge built in for safety - piston will not
fall out or be shot out of tool avoiding personal injury
Extra Features
Jumbo safety retainer
Rugged steel machined handle
Adjustable exhaust deflector
Heat treated polished steel barrel
The TX-133RB is designed to operate at 90 psi. It is built to use jumbo steel and upper/lower sleeve and can be
converted to run standard steel if desired.
Shipped with hose whip assembly with filter lubricator, 2 upper sleeves, 2 lower sleeves, 2 rubber bumpers and 2
springs
Part No. Description Stroke Weight Length Bore (in) BPM Chuck (in) Air Air Price
(in) (lb) (in) Inlet Cons
(in) (cfm)
TX133-6RB Rivet Buster 6" 6 26 20.5 1-3/16x6 1500 Jumbo .866 3/8 44 $1,120
TX133-6RB-OT Rivet Buster 6" 6 26 20.5 1-3/16x6 1500 Jumbo .866 3/8 44 $1,120
Outside Trigger
TX133-8RB Rivet Buster 8" 8 30 22.5 1-3/16x8 1400-1600 Jumbo .866 3/8 44 $1,155
TX133-8RB-OT Rivet Buster 8" 8 30 22.5 1-3/16x8 1400-1600 Jumbo .866 3/8 44 $1,155
Outside Trigger
TX133-11RB Rivet Buster 11" 11 33 25.5 1-3/16x11 850 Jumbo .866 3/8 44 $1,450
TX133-11RB- Rivet Buster 11" 11 33 25.5 1-3/16x11 850 Jumbo .866 3/8 44 $1,450
OT Outside Trigger
TX133KIT Accessory Kit—Upper Sleeve, Lower Sleeve, Rubber Bumper and Lock Spring $60.87
2101 Upper Sleeve $11.83
2103 Lower Sleeve $14.72
2104-4 Bumper—Orange Urethane $4.28
2194 Lock Spring $1.80
1851 Retainer $104.97
TX8HW1/2-F Hose Whip Assembly with TX1FL Filter Lubricator—6’ x 1/2” Hose and 1/2” MPT hose end $87.44
14 888-883-5144 USA-AIRTOOLS.COM
15
TX1BLTCS Chisel Scaler - Lever 5 15" with 12 1 1-1/8 4600 1/4" 3/8 $125
Throttle chisel
TX1BPTCS Chisel Scaler - Push 5 15" with 12 1 1-1/8 4600 1/4" 3/8 $135
Throttle chisel
TX1BCSRK TX1B Chisel Scaler Repair Kit
TX1BLTNS Needle Scaler - Lev- 7 17" with 12 1 1-1/8 4600 1/4" 3/8 $175
er Throttle 5" needles
TX1BPTNS Needle Scaler - Push 7 17" with 12 1 1-1/8 4600 1/4" 3/8 $190
Throttle 5" needles
TX1BLTNSW7 Needle Scaler - Lev- 7 19" with 12 1 1-1/8 4600 1/4" 3/8 $225
er Throttle 7" needles
TX1BLTNS-2MM Needle Scaler - Lev- 7 17" with 12 1 1-1/8 4600 1/4" 3/8 $255
er Throttle 5" needles
TX1BLTNS-4MM Needle Scaler - Lev- 7 17" with 12 1 1-1/8 4600 1/4" 3/8 $255
er Throttle 5" needles
TX1BLTNS-MK TX1B Millenium Needle Scaler Kit $245
TX1BNSRK TX1B Needle Scaler Repair Kit $109.39
888-883-5144 USA-AIRTOOLS.COM 15
16
Accessories
TX1BLTNS-MK TX1B Millennium Needle Scaler Kit $245.00
16 888-883-5144 USA-AIRTOOLS.COM
17
Tool Applications
Long Reach Scaler
Tile and non-skid removal
Grease and paint removal
Glue and resin removal
Barnacle and heavy scale removal
Push Throttle Scaler
For use in foundry casting cleaning
Part No. Description Stroke Length Weight Bore Inlet Min. Air BPM Price
(in) (in) (lb) (in) (in) Hose Cons
Size (cfm)
(in)
TX2LRCS Long Reach Scaler 2 48 or 60 14 15/16 1/2 1/2 10-12 3400 $555
TX2PTCS Push Throttle Scaler 2 17-1/2" 6 15/16 1/4 3/8 10-12 3400 $395
888-883-5144 USA-AIRTOOLS.COM 17
18
Part Description Stroke Length Weight Bore Inlet BPM Min Air Price
No. (in) (in) (lb) (in) (NPT) Hose Cons
Size (cfm)
(in)
S1 Single Piston Scaler 13/16 9 5 1 3/8 4000 3/8 9 $420.00
S1-AC Single Piston Scaler with Air 13/16 9 5 1 3/8 4000 3/8 9 $420.00
Cock Handle
T3 Triple Piston Scaler 13/16 11 9 1 3/8 5200 3/8 15 $550.00
T3-AC Triple Piston Scaler with Air 13/16 11 9 1 3/8 5200 3/8 15 $550.00
Cock Handle
Replacement Pistons
TX00146 Standard Steel Piston $47.61
TX00147 Standard Steel (2" longer than standard) $53.02
TX00149 Carbide Tipped Piston - Chisel Point $170.34
TX00150 Carbide Tipped Piston - Star Point $170.34
TX00151 Rexalloy: Solid Cobalt Alloy Pistons - Star Point $170.34
TX00155 Rexalloy: Solid Cobalt Alloy Pistons - Chisel Point $123.95
Repair Kits
S1RK S1 Single Piston Scaler Repair Kit $75.66
T3RK T3 Triple Piston Scaler Repair Kit $189.77
18 888-883-5144 USA-AIRTOOLS.COM
19
AIR SCRIBE
Description Part Weight Air Air In- Hose Length Min. Price
No. (oz) Cons. let (in) Size (in) Suppy
(cfm) (in) Air
Hose
Size
Air Scribe with Carrying Case TXAS1 13 <1 1/4 1/4 5 3/8 $265.00
Accessories
888-883-5144 USA-AIRTOOLS.COM 19
20
Call our office or visit our web site USA-Airtools.com for the specific size of retainer for your tool.
20 888-883-5144 USA-AIRTOOLS.COM
21
1501 Upper Sleeve—190 Retainer. Used with over size 1-11/32” dia. $10.19
Bore and 1500 tool
1502 Upper Sleeve—190 Retainer. Used with standard 1-7/32” dia. $10.19
Bore and 1500 tool
1503 Upper Sleeve—190 Retainer. Parker Taper bore and 1500 tool $14.80
2001 Upper Sleeve—190 Retainer. Straight bore and 2000 tool $10.21
2002 Upper Sleeve—2190 and 1851 Retainer. Parker taper bore and $16.25
2000 tool
2101 Upper Sleeve—2190 and 1851 Retainer. Standard bore and 2000 $48.40
tool
2101-15 Upper Sleeve—2190 and 1851 Retainer. Standard bore and 1500 $11.83
tool
2101-SHORT Jumbo Upper Sleeve—short $11.83
1504 Lower Sleeve—190 Retainer. Used with 1500 tool $13.09
1504-S Lower Sleeve—190 Retainer. Split sleeve used with 1500 tool $13.81
2003 Lower Sleeve—190 Retainer. Used with 2000 tool $13.09
2003S Lower Sleeve—190 Retainer. Split sleeve used with 2000 tool $13.81
2103 Lower Sleeve—2190 & 1851 Retainer. Used with 2000 tool $14.72
2103S Lower Sleeve—2190 & 1851 Retainer. Split sleeve used with $15.51
2000 tool
2103-15 Lower Sleeve—2190 & 1851 Retainer. Used with 1500 tool $14.72
2103-15S Lower Sleeve—2190 & 1851 Retainer. Split sleeve used with $13.42
1500 tool
1505 Rubber Bumper—used with lower sleeve #1504, 2003, 192 $2.76
2104-3 Rubber Bumper—used with 2103 lower sleeve—red plastic heavy $4.89
duty
2104-4 Rubber Bumper—used with 2103 lower sleeve—orange urethane $4.28
heavy duty
1094 Lock Spring—used with 1090 retainer $1.80
1194 Lock Spring—used with 1190, 1191, 1192, and 1195 retainer $1.80
888-883-5144 USA-AIRTOOLS.COM 21
22
FILTER-REGULATOR-LUBRICATOR SYSTEMS
22 888-883-5144 USA-AIRTOOLS.COM
23
FILTER-REGULATOR-LUBRICATOR SYSTEMS
Pre-filter Y strainer to trap large debris and sludge. Extends the life of the au-
tomatic float drain on the particulate filter
Particulate filter to remove harmful oil/water condensation, pipe scale, dirt and
rust from the compressed air supply which extends the life of the coalescing
filter element
Regulator with gauge for precise PSI control to the spray gun
Third stage coalescing filter brings high levels of filtration of oil, aerosols, and
sub-micron particles, which extends the life of the desiccant in the desiccant
dryer.
Desiccant Dryer where the air is distributed uniformly through the fill desiccant
bed and then dry air exits at the bottom of the desiccant bed into the intake
tube and out the outlet port of the unit to the spray gun.
888-883-5144 USA-AIRTOOLS.COM 23
24
Components Listing
Y Strainer Part No NPT Size (in) Description Price
Particulate Part No. Pipe Size (in) Max Flow (cfm) Bowl Capacity Price
Filter (oz)
Lubricator Part No Pipe Size (in) Max Flow (cfm) Bowl Capacity Price
(oz)
24 888-883-5144 USA-AIRTOOLS.COM
25
888-883-5144 USA-AIRTOOLS.COM 25
26
One of the most common repairs an air tool undergoes is disassembly to clean foreign material out of the valve
assembly. In-Line Filter Lubricators help prevent this from happening. The 40 micron filter can easily be
cleaned or replaced.
These are heavy-duty in-line lubricators to be installed 6-8 feet from tool. Designed for use with tools being
used too far away from compressor to be lubricated by a permanently mounted unit.
Part No. Description Capacity Hose Barb Max. Work- Oil Wt. Air Flow Price
(Fl Oz) Pipe Size ing Pressure Req. Capacity
at 70psi
TX0L-F In-Line Filter Lubricator 1.4 1/2" NPT 500 10 WT 30 $57.80
TX1L-F In-Line Filter Lubricator 3.7 3/4" NPT 260 10 WT 70 $64.05
TX2L-F In-Line Filter Lubricator 11.0 3/4" NPT 300 10 WT 70 $71.66
TX1/4L In-Line Lubricator 1/4" NPT 10 WT $28.88
TX0L In-Line Lubricator 1.4 1/2" NPT 260 10 WT 30 $40.36
TX1L In-Line Lubricator 3.7 3/4" NPT 260 10 WT 70 $43.38
TX2L In-Line Lubricator 11.0 3/4"NPT 300 10 WT 70 $53.71
TX3L In-Line Lubricator 16.0 1" NPT 250 10 WT 150 $64.05
TX0L-PR TX-0L w/ Presure Relief Cap 1.4 1/2" NPT 500 10 WT 30 $44.29
TX0L-F-PR TX-0L-F w/ Pressure Relief Cap 1.4 1/2" NPT 500 10 WT 30 $72.68
TX1L-PR TX-1L w/ Pressure Relief Cap 3.7 3/4" NPT 260 10 WT 70 $49.97
TX2L-PR TX-2L w/ Pressure Relief Cap 11.0 3/4" NPT 300 10 WT 70 $61.32
TX3L-PR TX-3L w/ Pressure Relief Cap 16.0 1" NPT 250 10 WT 150 $72.68
TX2L-CF Constant Feed TX-2L Lubricator 11.0 3/4" NPT 300 10 WT 70 $72.39
TX3L-CF Constant Feed TX-3L Lubricator 16.0 1" NPT 250 10 WT 150 $82.73
26 888-883-5144 USA-AIRTOOLS.COM
27
888-883-5144 USA-AIRTOOLS.COM 27
28
TX1HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/4" MPT $72.68
TX2HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 3/8" MPT $72.68
TX3HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/2" MPT $72.68
TX4HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $84.03
TX4HW1/2-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/2" MPT Swivel $84.03
TX5HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 3/8" MPT $73.81
TX6HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 1/2" MPT $73.81
TX7HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 3/4" MPT $73.81
TX8HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $87.44
TX8HW1/2-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 1/2" MPT Swivel $87.44
TX9HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID Crows Foot $72.68
Steel Hose Ends for Use With Combination In-Line Filter Lubricator Hose Whip Assemblies
28 888-883-5144 USA-AIRTOOLS.COM
29
Hose Swivels
Part No. Description Price
888-883-5144 USA-AIRTOOLS.COM 29
30
TX9071 1/8" FPT (In) x 1/8" MPT (Out) 1/8 2-3/16 3/4 $7.75
TX9072 1/4" FPT (In) x 1/4" MPT (Out) 1/4" 2-5/16 3/4 $10.09
TX9074 1/2" Female Thread - Both Ends 1/2 3-1/4 1-1/2 $23.85
AirPostDrivers.com
TX9074M 1/2" Female Thread (In) x 1/2" Male Thread (Out) 1/2 3-1/4 1-1/2 $25.46
TX9076 3/4" Female Thread - Both Ends 3/4 3-1/4 1-1/2 $27.13
TX9076M 3/4" Female Thread (In) x 3/4" Male Thread (Out) 3/4 3-1/4 1-1/2 $28.80
30 888-883-5144 USA-AIRTOOLS.COM