A strainer valve filters liquids by preventing solid matter from mixing in the liquid stream. A gate valve controls fluid flow through linear motion and is either fully open or fully closed. A globe valve regulates fluid flow, provides better leakproofing than a gate valve but is more expensive, and is commonly used as a control valve.
A strainer valve filters liquids by preventing solid matter from mixing in the liquid stream. A gate valve controls fluid flow through linear motion and is either fully open or fully closed. A globe valve regulates fluid flow, provides better leakproofing than a gate valve but is more expensive, and is commonly used as a control valve.
A strainer valve filters liquids by preventing solid matter from mixing in the liquid stream. A gate valve controls fluid flow through linear motion and is either fully open or fully closed. A globe valve regulates fluid flow, provides better leakproofing than a gate valve but is more expensive, and is commonly used as a control valve.
a pipe fitting through which liquid is passed for purification, filtering, or separation from solid matter; anything used to strain a liquid; any device functioning as a sieve or filter used to prevent solid bodies from mixing in a liquid stream or flow line.
Gate Valve
The gate valve is a regular type valve
that is used in any process plant. Here flow of fluid is controlled in linear motion. Gate valves are either in a fully open or fully closed position. Gate valve is used in nearly all fluid services functioning as air, fuel gas, feedwater, lube oil, steam, hydrocarbon, and close to every system.
Globe Valve
The globe valve is used to start-stop
and regulate the fluid in it. Globe stopper occurs at a place in the system where we have to control the fluid flow, and also take into account the leakage and tightness of the system. It is costlier than gate valves. But it provides good leakproof and tightness than gate valves. Normally the globe valves are used as a control valve.
Harvesting Rainwater for Your Home: Design, Install, and Maintain a Self-Sufficient Water Collection and Storage System in 5 Simple Steps for DIY beginner preppers, homesteaders, and environmentalists