Professional Documents
Culture Documents
Mechanics of Materials
(재료역학)
School of Naval Architecture & Ocean Engineering
Prof. Hyoung-Seock Seo
Introduction <2>
이중선체(double hull)
Introduction <4>
❑ Textbook
⚫ Andrew Pytel & Jaan Kiusalaas : Mechanics of Materials (2nd Edition), Cengage
Learning, 2013
⚫ 번역본 이주성, 양박달치, 이종길, 서영성, 노인식, 신광복, 우경식 공역
⚫ In the 1st ed., not only SI units but also the United State Customary System(USCS)
of units are used.
❑ Units
⚫ SI units
▪ International System of Units (Le Systeme International d’Unites)
▪ MKS (meter-kilogram-second) system
⚫ USCS or English or Imperial units
▪ FPS (foot-pound-second) units
Course Plan (1/2)
Part in text
Week Contents
book
1 Introduction, Type of stresses Chap.1
2 Strain : stress-strain relation, axial deformation, Hooke's law Chap.2
3 - Strain : statically indeterminate problems, thermal stresses Chap.2
4 - Torsion : torsion of circular shafts Chap.3
5 - Torsion : torsion of thin-walled tubes Chap.3
6 - Shear & moment in beams(1) : introduction, supports & loads,
shear-moment equations & diagrams Chap.4
8 Mid-term Examination
Course Plan (2/2)
Part in text
Week Contents
book
9 - Stresses in beam(1) : introduction, bending stress Chap.5
10 - Stresses in beam(2) : economic sections Chap.5
11 - Shear stress in beams Chap.5
12 - Deflection of beams (1) : integration, integration method Chap.6
- Deflection of beams (2) : method of superposition
13 Chap.6
- Statically indeterminate beams(1) : double-integration method
14 - Statically indeterminate beams(2) : method of superposition Chap.7
15 - Week for the make up lecture
16 Final Examination
Evaluation
❑ Weights of Each Items in Evaluation
⚫ Rate of attendance : 10% (Absence of more than 4 weeks ends up with F grade)
❑ Lecturer
⚫ Hyoung-Seock Seo
⚫ Office: 41-210
⚫ Email: seohs@ulsan.ac.kr