Professional Documents
Culture Documents
30-P-0010B Page 1 of 3
MODEL 163
Shown on engine
112
Model 163
2 Power steering
expansion reservoir
47 Air intake hose
P46.30-2188-01
Remove
Risk of death caused by vehicle Align vehicle between the columns of AS00.00-Z-0010-01A
Danger!
slipping or toppling off of the lifting the lifting platform and position the
platform. four support plates at the lifting
platform support points specified by
the vehicle manufacturer.
Risk of injury to skin or eyes from Depressurize the hydraulic system AS00.00-Z-0013-01A
Danger!
hydraulic fluid spraying out under completely before starting any work
pressure. Risk of poisoning from on the system. Wear protective
swallowing hydraulic fluid. clothing and safety glasses.
Risk of injury caused by fingers being When moving components, ensure AS00.00-Z-0011-01A
Danger!
jammed or pinched when removing, that no body parts or limbs are within
installing or aligning hoods, doors, trunk the operating range of moving parts.
lid/rear-end door or sliding roof.
Do not start engine until bleeding! Air ingestion causes irreparable
Never let the power steering pump damage to the power steering pump
ingest air and can cause an air cushion to form
After replacement of parts, DO NOT START ENG. Raise front wheels off
the ground and follow instructions.
© 2006 Mercedes-Benz USA, LLC
AR46.30-P-0010B Page 2 of 3
4 Turn steering wheel slowly from lock to Repeat turning the steering from After bubbles are expelled
Asst. necessary lock until no more bubbles can be seen lock to lock several times (up to 30
in the expansion reservoir (2) do not mistake the waving
to watch the times). During this process MB
steering gear oil must be added to the of fluid as being bubbles.
reservoir expansion reservoir by an assistant.
Bleed
Risk of accident caused by vehicle Secure vehicle to prevent it from AS00.00-Z-0005-01A
Danger!
starting off by itself when engine is moving.
running. Risk of injury caused by Wear closed and snug-fitting work
contusions and burns when working in clothes.
engine during starting procedure Do not grasp hot or rotating parts.
5 Start engine without moving the steering During this process an assistant
must observe the steering gear oil
level in the expansion reservoir (2)
and MB steering gear oil must be
added if necessary.
6 With the engine running, turn the Repeat the process until the
steering wheel slowly from lock to lock steering gear oil level remains
Steering gear
Number Designation Model 163
BF46.20-P-1001-01A Power steering Filling capacity Liters 1.2
MB steering gear oil Sheet BB00.40-P-0236-03A