Professional Documents
Culture Documents
2014 March
2014 March
6. How to determine the proportion of cement, water, fine aggregates and coarse aggregates?
a. Trial Mix
b. design mix
c. job-mix
7. Percent air voids will _____ as percent asphalt increases in marshal stability.
a. Decreases
b. Increases
c. The same
9. SPT means?
a. Special Proctor Test
b. Standard Proctor Test
c. Standard Penetration Test
2014 March
10. Type of emulsified asphalt w/c work better w/ wet aggregates and in cold weather.
a. anionic
b. cationic
c. emulsified asphalt
11. The apparatus used to determine the hydraulic setting of cement in the laboratory.
a. Vicat Apparatus
b. Vacit Apparatus
c. Penetration
12. How many weeks does the producer of asphalt mix or the contractor shall submit job-mix formula?
a. three (3) weeks
b. 2 weeks
c. 4 weeks
13. What is the latest state of the art equipment consuming radioactive material w/c is commonly used
in the compaction control of earth and asphalt road construction and in measurement of moisture
content?
a. Field density test
b. Nuclear Energy
c. Nuclear Density Gauge
d. Speedy Moisture content
14. If there's a necessity to add water to the concrete mix in order to increase its workability provided
that concrete does not exceed specified slump, how many minutes after the initial time of mixing does
adding of water be permitted?
a. Not exceeding 45 minutes
b. More than 30 minutes
c. Not more than 90 minutes
15. Gabions' dimensions are subject to tolerance limit to ____ of the manufactured state.
a. 3%
b. 4%
c. 5%
17. Samples for CBR test is soaked for _______ before subjecting to penetration test.
a. 24 hours
b. 4 days
c. 2 days
d. 4 days
2014 March
19. The test of asphalt w/c determines the overheating during the process of manufacture.
a. Spot Test
b. Ductility Test
c. Extraction
21. Job mix tolerance for the temperature of bituminous mixture of item 310.
a. +/- 5 degree
b. +/- 10 degree
c. +/- 15 degree
22. The required temperature of the mix for item 310 when placed upon dumping.
a. 107 degrees Celsius
b. 135 degrees Celsius
c. 160 degrees Celsius
23. A good sub-grade must have a ____ liquid limit, ____ plastic limit.
a. High, high
b. low, low
c. high, low
d. low, high
31. In item 104 (embankment), field density test is carried out for every _____ sq.m.
a. 500
b. 1000
c. 1500
d. 2000
32. Liquid limit is the moisture content corresponding to what no. of blows.
a. 20 blows
b. 25 blows
c. 30 blows
d. 24 blows
33. The samples to be used in liquid limit and plastic limit should pass to what sieve no.?
a. No. 30
b. No. 50
c. No. 40
34. A core should be taken for every ______, if no core was taken @ the end of each day's operation.
a. 100 l.m
b. 200 l.m
c. 300 l.m
2014 March
35. Samples of aggregates for base coarse materials when tested for quality passed the requirements
except grading. What will you recommend?
a. Rework/Reblend
b. Reject
c. Remove
d. Replace
36. The moisture density curve is different for each soil w/c of the ff. statement is true.
a. Max wet density is identified immediately though MC is not known
b. There will always be max dry density at optimum moisture content.
c. Natural Moisture content will be known
d. The max dry density always ranges from 8 to 15%.
37. What is the compressive strength in PSI if the concrete cylinder (6" diam.) if the samples fails @
92,000 Lbs.?
a. 3254 psi
b. 552 ksi
c. 15.33 ksi
38. What is the degree of compaction of soil having a maximum dry density of
2.233 g/cc and a dry density of soil from the hole equivalent to 2.010 g/cc?
a. 111%
b. 90%
c. 95%
d. 95.5%
39. Emulsified asphalt is a colloidal dispersion of asphalt in water whose color is chocolate brown before
and turns _____ when emulsion is broken.
a. blue
b. black
c. Yellow
40. What is the single test procedure to determine the suitability of an asphaltic concrete in mix?
a. Marshall Stability
b. Core
c. Ductility
42. What is the dividing line between coarse and fine aggregates?
a. Sieve no. 10
b. Sieve no. 4
c. Sieve no. 30
d. Sieve no. 40
2014 March
43. If the sample splitter is not advisable for use in reducing samples for test, what is the alternative wax
of reducing sample for testing size?
a. Mechanical Sieve
b. Mechanical Splitter
c. quartering
45. Concrete cylinder for testing shall be submitted to the laboratory ______ hrs. prior to testing
a. 24 hours
b. 4 hours
c. 20 hours
d. 30 hours
46. What is the maximum mass % wear for coarse aggregates by Los Angeles Abrasion Machine?
a. 30%
b. 40%
c. 50%
d. 60%
47. As construction work progresses, you noticed that the delivered materials are different from the one
tested and passed. what will you do?
a. conduct immediate re - testing
b. Reject the materials
c. Replace the materials with new from a different source
48. What is the sieve no. for the calibrated sand to be used in the FDT?
a. No. 4
b. No. 10
c. No. 30
d. No. 200
52. If the volume of asphalt specimen is 500 cc, weight if dry specimen in air is 1200 grams. What is the
bulk specific of asphalt specimen?
a. 2.40
b. 2.00
c. 2.50
d. 0.42
53. The results of the immersion-compression test conducted on an asphalt mix sample are as follows.
Dry Stability = 2,000 Kpa
Wet Stability = 1,000 Kpa
What is the resulting index retained strength? Does it meet the specs requirement of item 310?
a. 200
b. 50
c. 70
d. 120
54. A core specimen taken from a concrete pavement was measured for thickness determination. The
required pavement thickness is 23 cm. The measurement taken were: 23, 24, 23, 23, 24, 24, 24, 23. The
measurement at the center is 23 cm. Obtain the average thickness.
a. 23.22
b. 23.50
c. 23.00
57. How many samples are required for testing 125 concrete pipes?
a. 2
b. 3
c. 4
d. 5
58. Which of the ff. Does not affect the coring of sample;
a. Length-Diameter Ratio
b. Manner of Drilling
c. Diameter of Core
2014 March
59. It is the dynamic test used in the field to obtain rapid empirical results which can be used to estimate
shear strength and bearing capacity.
a. Dynamic Cone Penetrometer
b. Falling Weight Deflectometer
c. Ground Penetrating radar
d. International Roughness Index
60. Three cores taken a pavement section poured on a single day were tested for strength compliance.
The results are 2400 Psi, 3500 Psi and 4000 Psi. The required strength is 3500 Psi. What will you
recommend?
a. Re-core
b. Reject
c. Accept
d. Test for compressive
63. The approval of sample because the source was already identified will lead to:
a. disapproval of the test done before
b. rejection of the untested materials though they have the same source
c. replacement of the sample
65. Upon your arrival at the site, you have found out that it was already one hour and 50 minutes ago
when the concrete ingredients were charged into the mixing drum, what will you do?
a. Reject the concrete
b. Remix the concrete and add water
c. Test first the concrete for slump before pouring
68. What will be the amount of water cement ratio if the slump is zero (0)?
a. 0
b. 1
c. 0.5
d. 0.65
79. Used to det. The % of clay and silt in the field, except.
a. Dilatancy
b. Plasticity
c. Dispersion
d. None of the above