Professional Documents
Culture Documents
Loading diagram :
16.697 KN/m
2.88 m
24.04 KN 24.04 KN
RA Rb
Data :
Clear Cover = 45 mm
Loads on beam :
1
Total U.D.L on beam ( w ) = 1.73 + 11.592+3.375
= 16.697 KN/m
2
Fac. Max. B.M ( Mu ) = 17.31 * 1.5
Mu = M * gf = 25.965 KN-m
Effective depth required from max. B.M ( dreq ) = SQRT (25.965 * 10^6 ) / (0.138 * 30 * 230)
= 165 mm
Hence O.K
Hence O.K
3
Design for Shear :
Shear to be resisted by shear rft. ( Vus ) = 36.06 * 1000 - 0.67 * 230 * 247
Vus = ( Vu - tc * b * d ) = -2003 N
4
CALCULATION OF DEFLECTION FOR LINTEL BEAM L1
Data:
Breadth of compression face (b) = 230 mm
Overall Depth (D) = 300 mm
Effective depth (d) = 247 mm
Charecteristic strength of concrete ( f ck ) = 30 N/mm2
Yield strength of steel (f y ) = 415 N/mm2
breadth of web ( bw ) = 230
Effective span (L) = 2.88 m
Total load on beam (w) = 16.697 kN/m
Span Moment ( Mo ) = 16.697*2.88^2/8
= 17.31 kN-m
Igr/Ieff = 517500000/228128468.32
= 2.27
Cantilever -1 ( K3 = 0.500 )
Simply supported - 2 ( k3 = 0.125 )
Continuous at one end -3 ( k3 = 0.086 )
Fully continuous -4 ( k3 = 0.063 )
k3 = 0.125
K4 = 0.600
k4 = 0.72*(pt-pc)/sqrt(pt) for 0.25< pt-pc >1.0
k4 = 0.65*(pt-pc)/sqrt(pt) for pt-pc > 1.0
Shrinkage curvature value ( Ccs = k4* ecs/ D) = 0.6*0.0003/300
= 6E-07
Initial plus creep deflection due to permanent loads obtained using = 27386.13/13041.01*1.06
an elastic analysis with an effective modulus of elasticity aioc(perm) = 2.23 mm
Short term deflection due to permanent load using Ec, ai(perm) = 1.06 mm
Creep deflection due to perm. loads , acc ( perm) = aioc(perm) -ai(perm) = 2.23-1.06
= 1.17 mm
/228128468.32
0000/228128468.32
00006*2.88^2*10^6
3041.01*1.06