Professional Documents
Culture Documents
AMA-CN-FRM-0020
Policy Construction Revision 00
The Contractor certifies that this submittal has been verified and coordinated by all related disciplines and related disciplines
and relevant subcontractors.
Contractor Certification
Engineer’s - Comments
Comments:
Byju Eduvayil
Refer to the comments shown in the shop drawing below.
Revision submittal shall be submitted within one week
Sathyaprakash 13/02/2023
Name Signature Date
Status Code
☐ Accepted ☐
X Accepted with Comments ☐ Revise and Resubmit
Contractor Acknowledgement
Name Signature Date
Page 1 of 1
` Status- B (Approved with Comments)
AAT PRIMARY LSS EQUIPMENT
WEIGHTS / LOADING SCHEDULE
EQUIPMENT NAME SIZE (LxWxH)AREA (m²) DRY WEIGHT (kg) OPERATIONAL WEIGHTS (kg)
Client
EXHIBIT NAME SURFACE AREA (m²) GROSS VOLUME (m³) DRY WEIGHT (kg) OPERATIONAL WEIGHTS (kg)
CONCRETE PLINTH SIZE
(5450 x 4200 x 100)
1,515
Comments :
CT-1.1 2.88 1.22 370
20m3
CT-1.2 2.88 1.22 370 1,515
Flow Through Incoming Water AMAALA Project Permitting Support and Coordination Office (APPSCO)
CT-1.3 2.88 1.22 370 1,515 1.LSS Skid 1 specified in material submittal for outdoor coral raceway, CONSULTANT:
CT-1.4 2.88 1.22 370 1,515 degassing tank & supply
CT-2.1 2.88 1.22 430 1,575 Details/loadings are not shown here clarify.
(BY CLIENT)
CT-2.2 2.88 1.22 430 1,575
1,575
2.Contractor shall provide loading details for the compressor room / workshop &
CT-2.3 2.88 1.22 430 Architecture Engineering Pl a n n i n g
CT-2.4 2.88 1.22 430 1,575 storage. Tel 6695961 6695832 Fax 6602325 P.O.Box 2388 JEDDAH 21451
Email: info@sak-consult.com web. www.sak-consult.com
Stamp Signature
AR-3.1 1.54 1.60 110 1,710
1,710
3.Loading schedule refer “NSWS”. Contractor to describe “NSWS” and
AR-3.2 1.54 1.60 110
AR-3.3 1.54 1.60 110 1,710 corresponding location and loading details,
NSWS 12.57 25.13 TBC TBC 4.Contractor to provide details of vibration isolators for the operational Lead Engineering Consultant
mechanical equipment as recommended by the Manufacturer / System design KINGDOM OF SAUDI ARABIA
consultant. If vibration transfer to slab it shall be verified accordingly.
NOTE:
1). DELIVERY WEIGHT LOADINGS NOTED SHOULD BE EXPECTED TO BE USED ON ALL CS-SKID
DELIVERY PATHS. DELIVERY PATHS & REQUIRED OPENINGS TO BE CONFIRMED BY Stamp Signature
CONTRACTOR & CO-ORDINATED WITH THE PROJECT TEAM
2). CRANE LOCATIONS AND DELIVERY METHODS WITH ASSOCIATED LOADINGS STILL TO BE
CONFIRMED BY PROJECT TEAM
ANIMAL RESCUE INDOOR CORAL RACEWAY OUTDOOR CORAL RACEWAY CONTRACTOR :
HASAN AL-HARBI COP.
3). ALL LSS EQUIPMENT REQUIRED 100MM CONCRETE PLINTH FROM FFL UNLESS NOTIFIED
OTHERWISE. (I.D 1400 x 1000) TANK (I.D 2400 x 1200 x 500) TANK (I.D 2400 x 1200 x 500) DIBA
P.O. Box 109, DIB 71911
4). THE REQUIRED ACCESS FOR LSS EQUIPMENT IS 3m(w) x 3m (ht). (MINIMUM 1.604m3 x 3 1.220m3 x 4 1.220m3 x 4 Phone No:- 966 14 432 0555
OPENING). Compressor Room, Fax No:- 966 14 432 0044
Site Location
EXH CT-1.2
EXH AR-3.2 1.220 m³ Makkah
1.604 m³
Workshop counter N
Office Space
8.5m2 LSS 3-SKID 3 LSS 2-SKID 2 LSS 1-SKID 2
EXH CT-1.4
1.220 m³
C1 Issue For Approval 07/02/2023
C0 Issue For Approval 04/02/2023
Rev. Reason For Issue Date
Project
AMAALA PROJECT
MARINE LIFE OPERATION FACILITY
Building Name
Drawing Title