BOOM TRUCK INSPECTION REPORT VELOS| y
Engineering For A Safer Woes
INSPECTION REPORT
oe
Third Party Inspection of Boom Truck for
Joint Engineering Services Pvt Ltd
Velosi Report No: VISP-L-21-6-399/BT-01
fom eet
RASHIO ALL
ssa Masxcen
00 FINAL ee
Report | Juty08, 2021Thorough Examination &
VELOSI Inspection Report of
Engneerng For A Sater Woke Boom Truck
Project Reference Code: ViSP-L23-6.399 Report No : ViSP-L21-6-399/87-01
Location of Examination: GTH,MPCL Date of inspection: June 26,2021
Inspection Proposed By : Mr. Usman
Inspection Standard: BS 7121-2-4 Certification Validation : une 25,2022
Site Coordinator During Examination: Mr. Azam Date of Last Thorough Examination: Not Avaliable
‘CRANE SPECIFICATION "TRUCK SPECIFICATION
‘Name : Boom Truck ‘Make :SU2U, JAPAN
Type : Hydraulic Type : 42 Rigid Truck
‘Model & Serial No : TM-730351.& 686550 Engine No : 44F1-740708
[Name of Manufacture: TADANO, JAPAN ‘Chassis No: JAANPREEPS7101104
No of falls: 04 Year of Manufacturing : 2018
Registration No: 5-582
‘Model : NPR6E
; Load Condition | |, | Safe Working
Equipment Test Parameters: Radius/Angle | cone Fondiion | toad Test Status wes
Visual Test: Satisfactory
Funetional Test: Satisfactory NA Static Satisfactory 3.3 Ton
Load Test: Satisfactory
Remarks:
None
Disclaimer:
“This report does not make any warranty, stated or in erred; concerning the subject equipment, furthermore, neither Velo nor Its
‘employee shall be accountable in any manner for any personal inury or property damage or loss of any Kind arising from or connected
vith this inspection. The above reveals our findings atthe time and place of Inspection. This report does not relief the Owner/operator
from is contractual and reguatory responsible with respect to integrity and safety or Is plant during all ime of ts operations.”Thorough Examination &
VELOSI Inspection Report of
Engineering For A Sater World Boom Truck
NEEDED CORRECTIONS
= Status REMARKS (ifany) DEFECTS NOTED
General
Tires and wheels
Hand/Foot Brakes
‘Sheaves block
Radius/Angle Indicator
Duty Chart
ID on Contrals
Boom Condition
Main Hoist Winch
‘Swing Machinery
Turntable Bearing
Wire Rope
Hydraulic Jack
Hook
Controls - Upper
Power Unit - Cartier
Condition of Tracks
Electrics / Lights
Maintenance
Kieltelefctelatalada|sta|sia|sfals|a]s
‘General Condition
‘THIS 1S TO CERTIFY THAT the Undersigned, a competent inspector, dd, attend the site to examine by surface inspection and
witness testing to ascertain that this Equipment, its machinery, gears, iting appliances, structural supports/fxtures and
‘associate apparatus where applicable, have withstood the proof load testing, if herein applied
[1 Equipment is safe for its intended use, and tests were carried out without damage or permanent deformation to the
Equipment, Subject to the clearance of corrections noted above within the timescale noted and within the limits specified
‘providing there is continuous maintenance applied and qualified operators employed.
(Operation of this equipment without the clearance ofthe corrections invalidates this certificate.
Inspected By:
Rashid Ali
Assistant Manager
Disclaimer:
“This report does not make any warrenty, stated or in erred; concerning the subject equipment, furthermore, neither Velosi nor its
‘employee shall be accountable in any manner for any personal Injury or property damage or loss of any kind arising from or connected
ith this Inspection. The above reveals our findings at the time and place of Inspaction. This report does not relief the Owner/operator
‘from its contractual and regulatory responsibilities with respect to integrity and safety or its plant during al time of Its operations.”
Page 2 0f2