Professional Documents
Culture Documents
PAGE NO. 1
****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.05.00.131 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= JAN 19, 2023 *
* Time= 9:55:18 *
* *
* Licensed to: Cameron International *
****************************************************
1. STAAD SPACE
INPUT FILE: C:\Users\GRAJAS~1\Desktop\PP\Sri\CT_Base_Frame_two side brace.STD
2. START JOB INFORMATION
3. ENGINEER DATE 08-FEB-22
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 2.85 0 0; 2 6 0 0; 3 9.15 0 0; 4 0 0 1.485; 5 0 0 4.135; 6 0 0 5.615
9. 7 0 0 8.265; 8 2.85 0 9.75; 9 12 0 1.485; 10 12 0 4.135; 11 12 0 5.615
10. 12 12 0 8.265; 13 6 0 9.75; 14 9.15 0 9.75; 15 9.15 0 1.485; 16 6 0 1.485
11. 17 2.85 0 1.485; 18 9.15 0 4.135; 19 6 0 4.135; 20 2.85 0 4.135
12. 21 9.15 0 5.615; 22 6 0 5.615; 23 2.85 0 5.615; 24 9.15 0 8.265; 25 6 0 8.265
13. 26 2.85 0 8.265; 27 2.85 0 6.94; 28 2.85 0 2.81; 29 6 0 6.94; 30 6 0 2.81
14. 31 9.15 0 6.94; 32 9.15 0 2.81; 33 4.425 0 2.81; 34 7.575 0 2.81
15. 35 4.425 0 6.94; 36 7.575 0 6.94; 37 0 0 0; 38 12 0 0; 39 0 0 9.75
16. 40 12 0 9.75; 41 1 0 0; 42 1 0 1.485; 43 1 0 4.135; 44 1 0 5.615; 45 1 0 8.265
17. 46 1 0 9.75; 47 2 0 0; 48 2 0 1.485; 49 2 0 4.135; 50 2 0 5.615; 51 2 0 8.265
18. 52 2 0 9.75; 53 11 0 0; 54 11 0 1.485; 55 11 0 4.135; 56 11 0 5.615
19. 57 11 0 8.265; 58 11 0 9.75; 59 10 0 0; 60 10 0 1.485; 61 10 0 4.135
20. 62 10 0 5.615; 63 10 0 8.265; 64 10 0 9.75; 65 0 0 9.0075; 66 1 0 9.0075
21. 67 2 0 9.0075; 68 2.85 0 9.0075; 69 6 0 9.0075; 70 9.15 0 9.0075
22. 71 10 0 9.0075; 72 11 0 9.0075; 73 12 0 9.0075; 74 3.85 0 8.265
23. 75 3.85 0 9.0075; 76 3.85 0 9.75; 77 4.85 0 8.265; 78 4.85 0 9.0075
24. 79 4.85 0 9.75; 80 7 0 8.265; 81 7 0 9.0075; 82 7 0 9.75; 83 8 0 8.265
25. 84 8 0 9.0075; 85 8 0 9.75; 86 0 0 0.7425; 87 1 0 0.7425; 88 2 0 0.7425
26. 89 2.85 0 0.7425; 90 3.85 0 0.7425; 91 6 0 0.7425; 92 7 0 0.7425
27. 93 9.15 0 0.7425; 94 10 0 0.7425; 95 11 0 0.7425; 96 12 0 0.7425
28. 97 4.85 0 0.7425; 98 8 0 0.7425; 99 3.85 0 0; 100 3.85 0 1.485; 101 4.85 0 0
29. 102 4.85 0 1.485; 103 7 0 0; 104 7 0 1.485; 105 8 0 0; 106 8 0 1.485
30. MEMBER INCIDENCES
31. 1 4 42; 2 5 43; 3 6 44; 4 7 45; 5 1 89; 6 2 91; 7 3 93; 8 15 60; 9 16 104
32. 10 17 100; 11 18 61; 12 19 18; 13 20 19; 14 21 62; 15 22 21; 16 23 22
33. 17 24 63; 18 25 80; 19 26 74; 20 26 68; 21 23 27; 22 20 23; 23 17 28; 24 25 69
34. 25 22 29; 26 19 22; 27 16 30; 28 24 70; 29 21 31; 30 18 21; 31 15 32; 32 4 20
35. 35 18 9; 36 7 23; 39 21 12; 40 27 26; 41 28 20; 42 29 25; 43 30 19; 44 31 24
36. 45 32 18; 46 28 33; 47 30 34; 48 27 35; 49 29 36; 50 20 33; 51 16 34; 52 23 35
37. 53 25 36; 54 33 30; 55 34 32; 56 35 29; 57 36 31; 58 33 16; 59 34 18; 60 35 25
38. 61 36 21; 62 37 41; 63 1 99; 64 2 103; 65 3 59; 66 39 46; 67 8 76; 68 13 82
P R O B L E M S T A T I S T I C S
-----------------------------------
|----------------------------------------------------------------------------------|
| Member Number: 1 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.165 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.247E+00 T FY: 38.431E+00 FZ: 1.236E-03 |
| MX: 337.308E-09 MY: -220.233E-06 MZ: 123.758E-06 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 1 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.236E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 38.431E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.819E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 1.015E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.098 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 0.000E+00 |
| Bend Major 0.107 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.012 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.098 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 2 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.165 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.365E+00 T FY: 38.281E+00 FZ: 652.095E-06 |
| MX: -81.200E-09 MY: -136.759E-06 MZ: -123.758E-06 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 2 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 652.095E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 38.281E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.670E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 515.336E-06 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.098 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 0.000E+00 |
| Bend Major 0.107 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.011 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.098 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 3 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.165 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.365E+00 T FY: 38.281E+00 FZ: -652.095E-06 |
| MX: 81.200E-09 MY: 136.760E-06 MZ: -123.759E-06 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 3 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -652.095E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 38.281E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.670E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -515.336E-06 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.098 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 0.000E+00 |
| Bend Major 0.107 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.011 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.098 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 4 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.165 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.247E+00 T FY: 38.431E+00 FZ: -1.236E-03 |
| MX: -337.308E-09 MY: 220.233E-06 MZ: 123.759E-06 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 4 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.236E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 38.431E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.819E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -1.015E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.098 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 0.000E+00 |
| Bend Major 0.107 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.012 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.098 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 5 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 214.494E-03 C FY: 1.137E+00 FZ: 10.416E-03 |
| MX: 292.151E-03 MY: -25.162E-03 MZ: 28.387E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 5 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 214.494E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 214.494E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 10.416E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.137E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -479.006E-03 LC: 101 Loc: 0.743 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -25.162E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 742.500E-03 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.002 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.002 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 6 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 7.610E-03 C FY: 1.204E+00 FZ: -77.274E-03 |
| MX: -221.851E-06 MY: -20.326E-03 MZ: 41.275E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 6 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 7.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 7.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -77.274E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.204E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -515.577E-03 LC: 101 Loc: 0.743 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -77.702E-03 LC: 101 Loc: 0.743 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 742.500E-03 |
| Bend Minor 0.002 101 742.500E-03 |
| Sec. 9.3.1.1 0.002 101 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.003 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.002 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 7 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.062 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -211.861E-03 T FY: 1.133E+00 FZ: 10.865E-03 |
| MX: -292.162E-03 MY: -24.456E-03 MZ: 28.261E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 7 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 211.861E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 211.861E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 10.865E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.133E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -475.718E-03 LC: 101 Loc: 0.743 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -24.456E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 742.500E-03 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.001 101 742.500E-03 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 8 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.302 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.030E+00 C FY: -34.171E+00 FZ: 2.517E-03 |
| MX: 337.308E-09 MY: 83.912E-06 MZ: -103.094E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 8 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.517E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -35.211E+00 LC: 101 Loc: 0.850 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -103.094E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.223E-03 LC: 101 Loc: 0.850 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.085 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.302 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 KLT: 0.9996 |
| Equation 2: Ratio: 0.277 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.063 101 850.000E-03 |
| Bend Major 0.292 101 0.000E+00 |
| Bend Minor 0.000 101 850.000E-03 |
| Sec. 9.3.1.1 0.085 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.302 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.277 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 9 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.428 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -704.964E-03 T FY: -2.455E+00 FZ: 5.609E-03 |
| MX: 337.308E-09 MY: -720.883E-06 MZ: -150.957E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 9 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 704.964E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 704.964E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 12.045E+00 LC: 101 Loc: 1.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 12.045E+00 LC: 101 Loc: 1.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 5.609E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -15.679E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -150.957E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 4.888E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.183 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.427 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.425 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 1.000 KLT: 0.9997 |
| Equation 2: Ratio: 0.385 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 1.000 Kz : 1.0037 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.007 101 1.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.028 101 1.000E+00 |
| Bend Major 0.428 101 0.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.183 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.427 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.425 101 1.000E+00 |
| Sec. 9.3.2.2(ii) 0.385 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 10 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.366 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -12.257E+00 T FY: 17.444E+00 FZ: 6.155E-03 |
| MX: 337.308E-09 MY: 5.162E-03 MZ: -129.081E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 10 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.257E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.257E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 6.155E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 30.667E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -129.081E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 5.162E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.134 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.361 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.055 101 0.000E+00 |
| Bend Major 0.366 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.134 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.361 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 11 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.302 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.157E+00 C FY: -34.048E+00 FZ: 3.706E-03 |
| MX: -81.200E-09 MY: -1.135E-03 MZ: -102.750E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 11 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.706E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -35.087E+00 LC: 101 Loc: 0.850 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -102.750E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.014E-03 LC: 101 Loc: 0.850 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.085 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.302 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 KLT: 0.9996 |
| Equation 2: Ratio: 0.276 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.063 101 850.000E-03 |
| Bend Major 0.291 101 0.000E+00 |
| Bend Minor 0.000 101 850.000E-03 |
| Sec. 9.3.1.1 0.085 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.302 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.276 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 12 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.563 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 8.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -125.675E-03 T FY: -2.179E+00 FZ: -359.900E-06 |
| MX: -81.200E-09 MY: -1.694E-06 MZ: -149.883E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 3.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 104.79 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 12 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 125.675E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 125.675E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.624E+00 LC: 101 Loc: 2.625 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.624E+00 LC: 101 Loc: 2.625 |
| Capacity: 1.044E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -359.900E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -30.032E+00 LC: 101 Loc: 3.150 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.150E+00 General |
| Major Axis: Design Force: -149.883E+00 LC: 101 Loc: 0.000 |
| Capacity: 266.420E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -1.135E-03 LC: 101 Loc: 3.150 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.316 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.563 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.560 As per: Sec. 9.3.2.2 Ky : 1.0097 |
| LC: 101 Loc: 1.050 KLT: 0.9984 |
| Equation 2: Ratio: 0.503 As per: Sec. 9.3.2.2 Ky : 1.0097 |
| LC: 101 Loc: 1.050 Kz : 1.0039 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.021 101 2.625E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.054 101 3.150E+00 |
| Bend Major 0.563 101 0.000E+00 |
| Bend Minor 0.000 101 3.150E+00 |
| Sec. 9.3.1.1 0.316 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.563 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.560 101 1.050E+00 |
| Sec. 9.3.2.2(ii) 0.503 101 1.050E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 13 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.563 Critical Load Case: 101 Location: 3.15 |
| Critical Condition: Sec. 8.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -103.099E-03 T FY: 2.429E+00 FZ: -363.813E-06 |
| MX: -81.200E-09 MY: -1.694E-06 MZ: -149.883E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 3.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 104.79 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 13 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.853E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.853E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.044E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -363.813E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 30.282E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.150E+00 General |
| Major Axis: Design Force: -149.883E+00 LC: 101 Loc: 3.150 |
| Capacity: 266.420E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.144E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.316 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 3.150 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.563 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 3.150 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.055 101 0.000E+00 |
| Bend Major 0.563 101 3.150E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.316 101 3.150E+00 |
| Sec. 9.3.2.1 (Z) 0.563 101 3.150E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 14 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.302 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.157E+00 C FY: -34.048E+00 FZ: -3.706E-03 |
| MX: 81.200E-09 MY: 1.135E-03 MZ: -102.750E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 14 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.706E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -35.087E+00 LC: 101 Loc: 0.850 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -102.750E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.014E-03 LC: 101 Loc: 0.850 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.085 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.302 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 KLT: 0.9996 |
| Equation 2: Ratio: 0.276 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.063 101 850.000E-03 |
| Bend Major 0.291 101 0.000E+00 |
| Bend Minor 0.000 101 850.000E-03 |
| Sec. 9.3.1.1 0.085 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.302 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.276 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 15 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.563 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 8.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -125.675E-03 T FY: -2.179E+00 FZ: 359.899E-06 |
| MX: 81.200E-09 MY: 1.695E-06 MZ: -149.883E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 3.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 104.79 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 15 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 125.675E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 125.675E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.624E+00 LC: 101 Loc: 2.625 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.624E+00 LC: 101 Loc: 2.625 |
| Capacity: 1.044E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 359.899E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -30.032E+00 LC: 101 Loc: 3.150 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.150E+00 General |
| Major Axis: Design Force: -149.883E+00 LC: 101 Loc: 0.000 |
| Capacity: 266.420E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.135E-03 LC: 101 Loc: 3.150 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.316 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.563 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.560 As per: Sec. 9.3.2.2 Ky : 1.0097 |
| LC: 101 Loc: 1.050 KLT: 0.9984 |
| Equation 2: Ratio: 0.503 As per: Sec. 9.3.2.2 Ky : 1.0097 |
| LC: 101 Loc: 1.050 Kz : 1.0039 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.021 101 2.625E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.054 101 3.150E+00 |
| Bend Major 0.563 101 0.000E+00 |
| Bend Minor 0.000 101 3.150E+00 |
| Sec. 9.3.1.1 0.316 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.563 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.560 101 1.050E+00 |
| Sec. 9.3.2.2(ii) 0.503 101 1.050E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 16 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.563 Critical Load Case: 101 Location: 3.15 |
| Critical Condition: Sec. 8.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -103.099E-03 T FY: 2.429E+00 FZ: 363.813E-06 |
| MX: 81.200E-09 MY: 1.695E-06 MZ: -149.883E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 3.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 104.79 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 16 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.853E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.853E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.044E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 363.814E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 30.282E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.150E+00 General |
| Major Axis: Design Force: -149.883E+00 LC: 101 Loc: 3.150 |
| Capacity: 266.420E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -1.144E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.316 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 3.150 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.563 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 3.150 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.055 101 0.000E+00 |
| Bend Major 0.563 101 3.150E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.316 101 3.150E+00 |
| Sec. 9.3.2.1 (Z) 0.563 101 3.150E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 17 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.302 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.030E+00 C FY: -34.171E+00 FZ: -2.517E-03 |
| MX: -337.308E-09 MY: -83.913E-06 MZ: -103.094E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 17 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.517E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -35.211E+00 LC: 101 Loc: 0.850 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -103.094E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.223E-03 LC: 101 Loc: 0.850 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.085 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.302 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 KLT: 0.9996 |
| Equation 2: Ratio: 0.277 As per: Sec. 9.3.2.2 Ky : 1.0012 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.063 101 850.000E-03 |
| Bend Major 0.292 101 0.000E+00 |
| Bend Minor 0.000 101 850.000E-03 |
| Sec. 9.3.1.1 0.085 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.302 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.277 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 18 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.428 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -704.964E-03 T FY: -2.455E+00 FZ: -5.609E-03 |
| MX: -337.308E-09 MY: 720.883E-06 MZ: -150.957E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 18 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 704.964E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 704.964E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 12.045E+00 LC: 101 Loc: 1.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 12.045E+00 LC: 101 Loc: 1.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -5.609E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -15.679E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -150.957E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -4.888E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.183 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.427 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.425 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 1.000 KLT: 0.9997 |
| Equation 2: Ratio: 0.385 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 1.000 Kz : 1.0037 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.007 101 1.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.028 101 1.000E+00 |
| Bend Major 0.428 101 0.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.183 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.427 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.425 101 1.000E+00 |
| Sec. 9.3.2.2(ii) 0.385 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 19 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.366 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -12.257E+00 T FY: 17.444E+00 FZ: -6.155E-03 |
| MX: -337.308E-09 MY: -5.162E-03 MZ: -129.081E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 19 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.257E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.257E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -6.155E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 30.667E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -129.081E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -5.162E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.134 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.361 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.055 101 0.000E+00 |
| Bend Major 0.366 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.134 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.361 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 20 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 214.677E-03 C FY: 1.097E+00 FZ: -23.472E-03 |
| MX: -292.151E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 20 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 214.677E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 214.677E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -23.472E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.097E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -477.588E-03 LC: 101 Loc: 0.742 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -17.428E-03 LC: 101 Loc: 0.742 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.742 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.742 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.742 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 742.500E-03 |
| Bend Minor 0.000 101 742.500E-03 |
| Sec. 9.3.1.1 0.000 101 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.002 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.002 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 21 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.176 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 207.179E-03 C FY: 2.661E+00 FZ: 13.991E-03 |
| MX: 730.829E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 21 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 207.179E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 207.179E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 13.991E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.661E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 101 Loc: 1.325 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 18.538E-03 LC: 101 Loc: 1.325 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.325 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.325 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 0.000E+00 |
| Bend Major 0.007 101 1.325E+00 |
| Bend Minor 0.000 101 1.325E+00 |
| Sec. 9.3.1.1 0.000 101 1.325E+00 |
| Sec. 9.3.2.2 (i) 0.008 101 1.325E+00 |
| Sec. 9.3.2.2(ii) 0.007 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 22 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.123 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -1.177E+00 T FY: 905.095E-03 FZ: 0.000E+00 |
| MX: -2.294E-09 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 49.24 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 22 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 1.177E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 1.177E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.810E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 905.095E-03 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -334.885E-03 LC: 101 Loc: 0.740 |
| Capacity: 331.672E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.740 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.740 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.001 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 740.000E-03 |
| Sec. 9.3.2.1 (Z) 0.000 101 740.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 23 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.176 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 209.862E-03 C FY: 2.662E+00 FZ: 13.991E-03 |
| MX: -730.823E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 23 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 209.862E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 209.862E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 13.991E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.662E+00 LC: 106 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 106 Loc: 1.325 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 18.538E-03 LC: 101 Loc: 1.325 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.325 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.325 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 0.000E+00 |
| Bend Major 0.007 106 1.325E+00 |
| Bend Minor 0.000 101 1.325E+00 |
| Sec. 9.3.1.1 0.000 101 1.325E+00 |
| Sec. 9.3.2.2 (i) 0.008 101 1.325E+00 |
| Sec. 9.3.2.2(ii) 0.007 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 24 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 7.870E-03 C FY: 1.145E+00 FZ: -104.649E-03 |
| MX: 221.851E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 24 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 7.870E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 7.870E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -104.649E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.145E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -513.373E-03 LC: 101 Loc: 0.742 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -77.702E-03 LC: 101 Loc: 0.742 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.742 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.742 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.742 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 742.500E-03 |
| Bend Minor 0.002 101 742.500E-03 |
| Sec. 9.3.1.1 0.002 101 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.003 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.002 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 25 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -3.482E-03 T FY: 3.703E+00 FZ: -22.576E-03 |
| MX: 922.922E-09 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 25 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 3.482E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 3.482E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -22.576E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 3.703E+00 LC: 106 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -3.833E+00 LC: 106 Loc: 1.325 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -29.913E-03 LC: 101 Loc: 1.325 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.011 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 106 0.000E+00 |
| Bend Major 0.011 106 1.325E+00 |
| Bend Minor 0.001 101 1.325E+00 |
| Sec. 9.3.1.1 0.001 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.011 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 26 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.123 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -3.486E-03 T FY: 905.095E-03 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 49.24 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 26 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 3.486E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 3.486E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.810E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 905.095E-03 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -334.885E-03 LC: 101 Loc: 0.740 |
| Capacity: 331.672E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.740 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.740 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 740.000E-03 |
| Sec. 9.3.2.1 (Z) 0.001 101 740.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 27 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -3.246E-03 T FY: 3.702E+00 FZ: -22.576E-03 |
| MX: -922.920E-09 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 27 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 3.246E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 3.246E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -22.576E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 3.702E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -3.832E+00 LC: 101 Loc: 1.325 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -29.913E-03 LC: 101 Loc: 1.325 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.011 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 101 0.000E+00 |
| Bend Major 0.011 101 1.325E+00 |
| Bend Minor 0.001 101 1.325E+00 |
| Sec. 9.3.1.1 0.001 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.011 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 28 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.062 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -211.879E-03 T FY: 1.093E+00 FZ: -22.072E-03 |
| MX: 292.162E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 28 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 211.879E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 211.879E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -22.072E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.093E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -474.183E-03 LC: 101 Loc: 0.742 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -16.389E-03 LC: 101 Loc: 0.742 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.742 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 742.500E-03 |
| Bend Minor 0.000 101 742.500E-03 |
| Sec. 9.3.1.1 0.000 101 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.001 101 742.500E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 29 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -208.332E-03 T FY: 2.661E+00 FZ: 14.683E-03 |
| MX: -721.547E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 29 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 208.332E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 208.332E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 14.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.661E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 101 Loc: 1.325 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 19.456E-03 LC: 101 Loc: 1.325 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.007 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 0.000E+00 |
| Bend Major 0.007 101 1.325E+00 |
| Bend Minor 0.000 101 1.325E+00 |
| Sec. 9.3.1.1 0.001 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.007 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 30 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.197 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 1.176E+00 C FY: 905.095E-03 FZ: 0.000E+00 |
| MX: 2.294E-09 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 49.24 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 30 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 1.176E+00 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 1.176E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.810E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 905.095E-03 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -334.885E-03 LC: 101 Loc: 0.740 |
| Capacity: 331.672E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.740 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0002 |
| LC: 101 Loc: 0.740 KLT: 1.0000 |
| Equation 2: Ratio: 0.001 As per: Sec. 9.3.2.2 Ky : 1.0002 |
| LC: 101 Loc: 0.740 Kz : 0.9999 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.001 101 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 740.000E-03 |
| Sec. 9.3.2.2 (i) 0.002 101 740.000E-03 |
| Sec. 9.3.2.2(ii) 0.001 101 740.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 31 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -210.779E-03 T FY: 2.662E+00 FZ: 14.683E-03 |
| MX: 721.541E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 31 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 210.779E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 210.779E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 14.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.662E+00 LC: 106 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 106 Loc: 1.325 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 19.455E-03 LC: 101 Loc: 1.325 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.007 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 0.000E+00 |
| Bend Major 0.007 106 1.325E+00 |
| Bend Minor 0.000 101 1.325E+00 |
| Sec. 9.3.1.1 0.001 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.007 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 32 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.666 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -1.396E+00 T FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.892E+00 |
| Parameters: LZ: 3.892E+00 LY: 3.892E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 266.55 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 32 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 1.396E+00 LC: 101 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 1.396E+00 LC: 101 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 82.320E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 25.206E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.892E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.359E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.005 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.005 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.005 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 35 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.762 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 1.383E+00 C FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.892E+00 |
| Parameters: LZ: 3.892E+00 LY: 3.892E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 266.55 Allowable Ratio: 350.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 35 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 1.383E+00 LC: 101 Loc: 0.000 |
| Capacity: 82.320E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 1.383E+00 LC: 101 Loc: 0.000 |
| Capacity: 25.206E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.892E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.359E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.005 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.055 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.005 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.055 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.017 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 36 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.666 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -1.396E+00 T FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.892E+00 |
| Parameters: LZ: 3.892E+00 LY: 3.892E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 266.55 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 36 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 1.396E+00 LC: 101 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 1.396E+00 LC: 101 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 82.320E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 25.206E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.892E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.359E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.005 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.005 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.005 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 39 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.762 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 1.383E+00 C FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 3.892E+00 |
| Parameters: LZ: 3.892E+00 LY: 3.892E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 266.55 Allowable Ratio: 350.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 39 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 1.383E+00 LC: 101 Loc: 0.000 |
| Capacity: 82.320E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 1.383E+00 LC: 101 Loc: 0.000 |
| Capacity: 25.206E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 3.892E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.359E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.005 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.055 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.005 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.055 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.017 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 40 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.176 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 209.862E-03 C FY: -1.041E+00 FZ: -13.991E-03 |
| MX: 730.829E-06 MY: 18.538E-03 MZ: -2.453E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 40 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 209.862E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 209.862E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -13.991E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.662E+00 LC: 106 Loc: 1.325 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 106 Loc: 0.000 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 18.538E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 1.325E+00 |
| Bend Major 0.007 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.008 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.007 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 41 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.176 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 207.179E-03 C FY: -1.041E+00 FZ: -13.991E-03 |
| MX: -730.823E-06 MY: 18.538E-03 MZ: -2.453E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 41 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 207.179E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 207.179E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -13.991E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.661E+00 LC: 101 Loc: 1.325 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 101 Loc: 0.000 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 18.538E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 1.325E+00 |
| Bend Major 0.007 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.008 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.007 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 42 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -3.246E-03 T FY: -2.081E+00 FZ: 22.576E-03 |
| MX: 922.922E-09 MY: -29.913E-03 MZ: -3.832E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 42 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 3.246E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 3.246E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 22.576E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -3.702E+00 LC: 101 Loc: 1.325 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -3.832E+00 LC: 101 Loc: 0.000 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -29.913E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.011 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 101 1.325E+00 |
| Bend Major 0.011 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.011 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 43 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -3.482E-03 T FY: -2.082E+00 FZ: 22.576E-03 |
| MX: -922.920E-09 MY: -29.913E-03 MZ: -3.833E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 43 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 3.482E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 3.482E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 22.576E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -3.703E+00 LC: 106 Loc: 1.325 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -3.833E+00 LC: 106 Loc: 0.000 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -29.913E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.011 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 106 1.325E+00 |
| Bend Major 0.011 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.011 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 44 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -210.779E-03 T FY: -1.041E+00 FZ: -14.683E-03 |
| MX: -721.547E-06 MY: 19.456E-03 MZ: -2.453E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 44 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 210.779E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 210.779E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -14.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.662E+00 LC: 106 Loc: 1.325 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 106 Loc: 0.000 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 19.456E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.007 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 1.325E+00 |
| Bend Major 0.007 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.007 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 45 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.110 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -208.332E-03 T FY: -1.041E+00 FZ: -14.683E-03 |
| MX: 721.541E-06 MY: 19.455E-03 MZ: -2.453E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.325E+00 |
| Parameters: LZ: 2.650E+00 LY: 1.325E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 44.08 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 45 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 208.332E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 208.332E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.864E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -14.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.661E+00 LC: 101 Loc: 1.325 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.325E+00 General |
| Major Axis: Design Force: -2.453E+00 LC: 101 Loc: 0.000 |
| Capacity: 335.949E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 19.455E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.007 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 1.325E+00 |
| Bend Major 0.007 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.007 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 46 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.131 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -27.982E-03 T FY: 2.082E+00 FZ: 2.683E-03 |
| MX: 503.189E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 46 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 27.982E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 27.982E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.082E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 1.575 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 4.226E-03 LC: 101 Loc: 1.575 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.575 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.575 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.575 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.005 101 1.575E+00 |
| Bend Minor 0.000 101 1.575E+00 |
| Sec. 9.3.1.1 0.000 101 1.575E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 1.575E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.575E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 47 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.210 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 23.548E-03 C FY: 2.082E+00 FZ: -2.447E-03 |
| MX: -515.966E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 47 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 23.548E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 23.548E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.447E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.082E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 1.575 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -3.855E-03 LC: 101 Loc: 1.575 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.575 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.575 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.575 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.005 101 1.575E+00 |
| Bend Minor 0.000 101 1.575E+00 |
| Sec. 9.3.1.1 0.000 101 1.575E+00 |
| Sec. 9.3.2.2 (i) 0.005 101 1.575E+00 |
| Sec. 9.3.2.2(ii) 0.005 101 1.575E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 48 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.131 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -27.982E-03 T FY: 2.082E+00 FZ: -2.683E-03 |
| MX: -503.192E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 48 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 27.982E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 27.982E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.082E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 1.575 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -4.226E-03 LC: 101 Loc: 1.575 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.575 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.575 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.575 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.005 101 1.575E+00 |
| Bend Minor 0.000 101 1.575E+00 |
| Sec. 9.3.1.1 0.000 101 1.575E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 1.575E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.575E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 49 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.210 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 23.548E-03 C FY: 2.082E+00 FZ: 2.447E-03 |
| MX: 515.969E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 49 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 23.548E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 23.548E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.447E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 2.082E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 1.575 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 3.855E-03 LC: 101 Loc: 1.575 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.575 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.575 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.575 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.005 101 1.575E+00 |
| Bend Minor 0.000 101 1.575E+00 |
| Sec. 9.3.1.1 0.000 101 1.575E+00 |
| Sec. 9.3.2.2 (i) 0.005 101 1.575E+00 |
| Sec. 9.3.2.2(ii) 0.005 101 1.575E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 50 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.352 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -680.028E-03 T FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 50 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 680.028E-03 LC: 101 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 680.028E-03 LC: 101 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.003 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 51 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.403 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 701.168E-03 C FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 350.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 51 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 701.168E-03 LC: 101 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 701.168E-03 LC: 101 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.009 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.009 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.004 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 52 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.352 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -680.028E-03 T FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 52 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 680.028E-03 LC: 101 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 680.028E-03 LC: 101 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.003 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 53 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.403 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 701.168E-03 C FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 350.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 53 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 701.168E-03 LC: 101 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 701.168E-03 LC: 101 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.009 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.009 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.004 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 54 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.131 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.603E-03 T FY: -155.463E-03 FZ: -2.683E-03 |
| MX: 503.189E-06 MY: 4.226E-03 MZ: -1.762E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 54 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.603E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.603E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.082E+00 LC: 101 Loc: 1.575 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 0.000 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 4.226E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 1.575E+00 |
| Bend Major 0.005 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 55 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.210 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 29.367E-03 C FY: -155.463E-03 FZ: 2.447E-03 |
| MX: -515.966E-06 MY: -3.855E-03 MZ: -1.762E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 55 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 29.367E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 29.367E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.447E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.082E+00 LC: 101 Loc: 1.575 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 0.000 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -3.855E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 1.575E+00 |
| Bend Major 0.005 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.005 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.005 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 56 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.131 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.603E-03 T FY: -155.463E-03 FZ: 2.683E-03 |
| MX: -503.192E-06 MY: -4.226E-03 MZ: -1.762E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 56 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.603E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.603E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.082E+00 LC: 101 Loc: 1.575 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 0.000 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -4.226E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 1.575E+00 |
| Bend Major 0.005 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 57 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.210 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 29.367E-03 C FY: -155.463E-03 FZ: -2.447E-03 |
| MX: 515.969E-06 MY: 3.855E-03 MZ: -1.762E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.575E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.575E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 52.40 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 57 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 29.367E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 29.367E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.774E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.447E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -2.082E+00 LC: 101 Loc: 1.575 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.575E+00 General |
| Major Axis: Design Force: -1.762E+00 LC: 101 Loc: 0.000 |
| Capacity: 328.937E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 3.855E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 1.575E+00 |
| Bend Major 0.005 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.005 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.005 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 58 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.352 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -688.363E-03 T FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 58 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 688.363E-03 LC: 101 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 688.363E-03 LC: 101 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.003 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 59 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.403 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 693.564E-03 C FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 350.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 59 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 693.564E-03 LC: 101 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 693.564E-03 LC: 101 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.009 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.009 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.004 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 60 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.352 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -688.363E-03 T FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 60 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 688.363E-03 LC: 101 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 688.363E-03 LC: 101 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.003 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 61 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.403 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 693.564E-03 C FY: 0.000E+00 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 11.400E+00 IZZ: 24.300E+00 RZZ: 1.460E+00|
| AYY: 6.000E+00 IYY: 96.064E+00 RYY: 2.903E+00|
| AZZ: 6.000E+00 IXX: 2.432E+00 CW: 10.181E+00|
| ZEZ: 8.114E+00 ZPZ: 14.409E+00 |
| ZEY: 18.019E+00 ZPY: 28.546E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.058E+00 |
| Parameters: LZ: 2.058E+00 LY: 2.058E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 140.97 Allowable Ratio: 350.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Semi-Compact; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 61 |
| Member Section: ST ISA75X75X8 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 259.091E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 306.432E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 693.564E-03 LC: 101 Loc: 0.000 |
| Capacity: 173.488E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 693.564E-03 LC: 101 Loc: 0.000 |
| Capacity: 76.111E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.058E+00 General |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 3.720E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.844E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.009 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.000 0 0.000E+00 |
| Bend Major 0.000 0 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.003 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.009 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.004 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 62 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.190 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 33.269E-03 C FY: 368.749E-03 FZ: -497.358E-06 |
| MX: -48.994E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 62 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 33.269E-03 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 33.269E-03 LC: 101 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -497.358E-06 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 400.842E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -196.771E-03 LC: 106 Loc: 1.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -497.358E-06 LC: 101 Loc: 1.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.917 KLT: 1.0000 |
| Equation 2: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.917 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.004 106 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.003 101 916.667E-03 |
| Sec. 9.3.2.2(ii) 0.003 101 916.667E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 63 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -797.214E-06 T FY: 808.852E-03 FZ: -13.993E-03 |
| MX: -20.607E-03 MY: 11.478E-03 MZ: 598.314E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 63 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 797.214E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 797.214E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -13.993E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 929.831E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: 764.045E-03 LC: 106 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 11.478E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.012 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.006 106 0.000E+00 |
| Bend Major 0.015 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.012 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 64 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -685.191E-06 T FY: 594.731E-03 FZ: -13.104E-03 |
| MX: 20.667E-03 MY: 10.643E-03 MZ: 272.273E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 64 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 685.192E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 685.192E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -13.104E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 606.663E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: 272.273E-03 LC: 101 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 10.643E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 106 0.000E+00 |
| Bend Major 0.005 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 65 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.101 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -36.537E-03 T FY: 996.374E-03 FZ: -19.587E-03 |
| MX: 48.928E-03 MY: 13.858E-03 MZ: 889.952E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 850.000E-03 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 40.30 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 65 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 36.537E-03 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 36.537E-03 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 634.590E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -19.587E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.015E+00 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: 889.952E-03 LC: 101 Loc: 0.000 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 13.858E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.016 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 106 0.000E+00 |
| Bend Major 0.016 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.002 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.016 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 66 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.190 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 33.269E-03 C FY: 368.749E-03 FZ: 497.358E-06 |
| MX: 48.994E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 66 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 33.269E-03 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 33.269E-03 LC: 101 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 497.358E-06 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 400.842E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -196.771E-03 LC: 106 Loc: 1.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 497.358E-06 LC: 101 Loc: 1.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.917 KLT: 1.0000 |
| Equation 2: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.917 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.004 106 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.003 101 916.667E-03 |
| Sec. 9.3.2.2(ii) 0.003 101 916.667E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 67 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -797.213E-06 T FY: 808.852E-03 FZ: 13.993E-03 |
| MX: 20.607E-03 MY: -11.478E-03 MZ: 598.314E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 67 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 797.213E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 797.213E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 13.993E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 929.831E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: 764.045E-03 LC: 106 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -11.478E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.012 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.006 106 0.000E+00 |
| Bend Major 0.015 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.012 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 68 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -685.190E-06 T FY: 594.731E-03 FZ: 13.104E-03 |
| MX: -20.667E-03 MY: -10.643E-03 MZ: 272.273E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 68 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 685.190E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 685.190E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 13.104E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 606.663E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: 272.273E-03 LC: 101 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -10.643E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 106 0.000E+00 |
| Bend Major 0.005 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 69 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.101 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -36.537E-03 T FY: 996.373E-03 FZ: 19.587E-03 |
| MX: -48.928E-03 MY: -13.858E-03 MZ: 889.952E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 850.000E-03 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 40.30 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 69 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 36.537E-03 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 36.537E-03 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 634.590E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 19.587E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.015E+00 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: 889.952E-03 LC: 101 Loc: 0.000 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -13.858E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.016 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 106 0.000E+00 |
| Bend Major 0.016 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.1 0.002 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.016 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 70 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.088 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -514.879E-06 T FY: -369.126E-03 FZ: 33.192E-03 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: -48.928E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 70 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 514.879E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 514.879E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 33.192E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -704.285E-03 LC: 106 Loc: 0.743 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 393.846E-03 LC: 106 Loc: 0.743 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 24.645E-03 LC: 101 Loc: 0.743 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.006 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
| Equation 2(Y): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 742.500E-03 |
| Bend Major 0.007 106 742.500E-03 |
| Bend Minor 0.002 101 742.500E-03 |
| Sec. 9.3.1.1 0.002 101 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.006 101 742.500E-03 |
| Sec. 9.3.2.1 (Y) 0.002 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 71 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.314 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 0.000E+00 T FY: 948.996E-03 FZ: 0.000E+00 |
| MX: 121.631E-06 MY: 0.000E+00 MZ: 1.040E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 125.65 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 71 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 674.907E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 268.166E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 976.751E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 0.000 |
| Capacity: 39.282E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 106 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.007 106 0.000E+00 |
| Bend Major 0.028 106 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.001 106 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 72 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.175 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 0.000E+00 T FY: 302.025E-03 FZ: 0.000E+00 |
| MX: 397.832E-12 MY: 0.000E+00 MZ: -41.879E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 70.17 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 72 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 515.678E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -302.025E-03 LC: 101 Loc: 1.480 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -168.711E-03 LC: 106 Loc: 0.740 |
| Capacity: 48.587E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 106 Loc: 0.740 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 1.480E+00 |
| Bend Major 0.003 106 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.000 106 740.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 73 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.314 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 0.000E+00 T FY: 132.580E-03 FZ: 0.000E+00 |
| MX: -121.632E-06 MY: 0.000E+00 MZ: -41.879E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 125.65 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 73 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 674.907E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 268.166E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -976.751E-03 LC: 106 Loc: 2.650 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 2.650 |
| Capacity: 39.282E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 106 Loc: 2.650 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.007 106 2.650E+00 |
| Bend Major 0.028 106 2.650E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.001 106 2.650E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 74 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.088 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -743.690E-06 T FY: 1.108E+00 FZ: 72.921E-03 |
| MX: 0.000E+00 MY: -29.499E-03 MZ: 1.040E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 74 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 743.690E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 743.690E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 72.921E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.108E+00 LC: 101 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 0.000 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -29.499E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.019 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 101 0.000E+00 |
| Bend Major 0.020 106 0.000E+00 |
| Bend Minor 0.003 101 0.000E+00 |
| Sec. 9.3.1.1 0.003 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.019 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.003 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 75 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.141 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 497.358E-06 C FY: -368.749E-03 FZ: 33.269E-03 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: -48.994E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 75 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 497.358E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 497.358E-06 LC: 101 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 33.269E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -703.887E-03 LC: 106 Loc: 0.743 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 393.550E-03 LC: 106 Loc: 0.743 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 24.702E-03 LC: 101 Loc: 0.743 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 742.500E-03 |
| Bend Major 0.007 106 742.500E-03 |
| Bend Minor 0.002 101 742.500E-03 |
| Sec. 9.3.1.1 0.002 101 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.008 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.007 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 76 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.314 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 0.000E+00 T FY: 948.829E-03 FZ: 0.000E+00 |
| MX: -123.758E-06 MY: 0.000E+00 MZ: 1.040E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 125.65 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 76 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 674.907E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 268.166E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 976.469E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 0.000 |
| Capacity: 39.282E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 106 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.007 106 0.000E+00 |
| Bend Major 0.028 106 0.000E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.001 106 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 77 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.314 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 0.000E+00 T FY: 132.747E-03 FZ: 0.000E+00 |
| MX: 123.759E-06 MY: 0.000E+00 MZ: -41.788E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 125.65 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 77 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 674.907E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 268.166E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -976.469E-03 LC: 106 Loc: 2.650 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 2.650 |
| Capacity: 39.282E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 106 Loc: 2.650 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.007 106 2.650E+00 |
| Bend Major 0.028 106 2.650E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.001 106 2.650E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 78 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.141 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 728.323E-06 C FY: 1.108E+00 FZ: 73.090E-03 |
| MX: 0.000E+00 MY: -29.567E-03 MZ: 1.040E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 78 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 728.323E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 728.323E-06 LC: 101 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 73.090E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 1.108E+00 LC: 101 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 0.000 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -29.567E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.022 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.019 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 101 0.000E+00 |
| Bend Major 0.020 106 0.000E+00 |
| Bend Minor 0.003 101 0.000E+00 |
| Sec. 9.3.1.1 0.003 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.022 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.019 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 79 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.175 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 0.000E+00 T FY: 302.025E-03 FZ: 0.000E+00 |
| MX: -396.806E-12 MY: 0.000E+00 MZ: -41.788E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 70.17 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 79 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 515.678E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -302.025E-03 LC: 101 Loc: 1.480 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -168.558E-03 LC: 106 Loc: 0.740 |
| Capacity: 48.587E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 106 Loc: 0.740 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 1.480E+00 |
| Bend Major 0.003 106 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.1 0.000 106 740.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 80 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.190 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 35.201E-03 C FY: -166.201E-03 FZ: 3.233E-03 |
| MX: -48.994E-03 MY: -497.358E-06 MZ: -172.404E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 80 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 35.201E-03 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 35.201E-03 LC: 101 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.233E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -574.343E-03 LC: 101 Loc: 1.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -199.454E-03 LC: 106 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 2.736E-03 LC: 101 Loc: 1.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.004 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.004 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 1.000E+00 |
| Bend Major 0.004 106 0.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.004 101 1.000E+00 |
| Sec. 9.3.2.2(ii) 0.004 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 81 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.210 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.247E+00 T FY: 35.699E+00 FZ: -3.147E-03 |
| MX: 337.308E-09 MY: -2.132E-03 MZ: -74.122E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 81 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.147E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 36.922E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -74.122E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.132E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.044 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.201 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.067 101 0.000E+00 |
| Bend Major 0.210 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.044 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.201 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 82 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -3.730E-03 T FY: 126.808E-03 FZ: 1.932E-03 |
| MX: 7.726E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 82 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 3.730E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 3.730E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.932E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 134.054E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.295E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.435E-03 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.014 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.015 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.015 101 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.014 101 742.500E-03 |
| Sec. 9.3.2.1 (Y) 0.001 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 83 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.209 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.365E+00 T FY: 35.586E+00 FZ: -2.555E-03 |
| MX: -81.200E-09 MY: -2.040E-03 MZ: -73.868E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 83 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.555E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 36.809E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -73.868E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.040E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.044 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.200 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.066 101 0.000E+00 |
| Bend Major 0.209 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.044 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.200 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 84 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.894 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 2.136E-03 C FY: 159.778E-03 FZ: 0.000E+00 |
| MX: -17.771E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 84 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 2.136E-03 LC: 101 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 2.136E-03 LC: 101 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.030 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.325 KLT: 1.0000 |
| Equation 2: Ratio: 0.027 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.325 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.2 (i) 0.030 101 1.325E+00 |
| Sec. 9.3.2.2(ii) 0.027 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 85 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.209 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.365E+00 T FY: 35.586E+00 FZ: 2.555E-03 |
| MX: 81.200E-09 MY: 2.040E-03 MZ: -73.868E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 85 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.555E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 36.809E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -73.868E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.040E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.044 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.200 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.066 101 0.000E+00 |
| Bend Major 0.209 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.044 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.200 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 86 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.210 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.247E+00 T FY: 35.699E+00 FZ: 3.147E-03 |
| MX: -337.308E-09 MY: 2.132E-03 MZ: -74.122E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 86 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.147E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 36.922E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -74.122E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.132E-03 LC: 101 Loc: 1.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.044 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.201 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.067 101 0.000E+00 |
| Bend Major 0.210 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.044 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.201 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 87 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.894 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 2.136E-03 C FY: 159.778E-03 FZ: 0.000E+00 |
| MX: 17.771E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 87 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 2.136E-03 LC: 101 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 2.136E-03 LC: 101 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.030 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.325 KLT: 1.0000 |
| Equation 2: Ratio: 0.027 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.325 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.2 (i) 0.030 101 1.325E+00 |
| Sec. 9.3.2.2(ii) 0.027 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 88 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.190 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 35.201E-03 C FY: -166.201E-03 FZ: -3.233E-03 |
| MX: 48.994E-03 MY: 497.358E-06 MZ: -172.404E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 88 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 35.201E-03 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 35.201E-03 LC: 101 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.233E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -574.343E-03 LC: 101 Loc: 1.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -199.454E-03 LC: 106 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.736E-03 LC: 101 Loc: 1.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.004 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.004 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 1.000E+00 |
| Bend Major 0.004 106 0.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.004 101 1.000E+00 |
| Sec. 9.3.2.2(ii) 0.004 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 89 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -2.246E-03 T FY: 126.148E-03 FZ: 626.986E-06 |
| MX: -7.442E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 89 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 2.246E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 2.246E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 626.986E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 133.835E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.132E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 465.537E-06 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.014 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.015 106 742.500E-03 |
| Bend Minor 0.000 101 742.500E-03 |
| Sec. 9.3.1.3 0.015 106 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.014 101 742.500E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 90 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.499 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 5.344E-03 C FY: 89.235E-03 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 124.79 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 90 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 5.344E-03 LC: 101 Loc: 0.000 |
| Capacity: 167.050E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 5.344E-03 LC: 101 Loc: 0.000 |
| Capacity: 73.219E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 89.235E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -33.017E-03 LC: 101 Loc: 0.740 |
| Capacity: 4.127E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.008 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.740 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.740 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.740 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.008 101 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.008 101 740.000E-03 |
| Sec. 9.3.2.2 (i) 0.008 101 740.000E-03 |
| Sec. 9.3.2.2(ii) 0.007 101 740.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 91 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.161 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 36.610E-03 C FY: -649.287E-03 FZ: -19.317E-03 |
| MX: -48.994E-03 MY: 2.736E-03 MZ: 191.130E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 850.000E-03 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 40.30 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 91 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 36.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 36.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 634.590E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -19.317E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.016E+00 LC: 106 Loc: 0.850 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: 890.465E-03 LC: 101 Loc: 0.850 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -13.684E-03 LC: 101 Loc: 0.850 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.018 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.850 KLT: 1.0000 |
| Equation 2: Ratio: 0.015 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.850 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 106 850.000E-03 |
| Bend Major 0.016 101 850.000E-03 |
| Bend Minor 0.001 101 850.000E-03 |
| Sec. 9.3.1.1 0.002 101 850.000E-03 |
| Sec. 9.3.2.2 (i) 0.018 101 850.000E-03 |
| Sec. 9.3.2.2(ii) 0.015 101 850.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 92 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.294 Critical Load Case: 101 Location: 0.85 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.247E+00 T FY: 34.426E+00 FZ: 1.340E-03 |
| MX: 337.308E-09 MY: -992.881E-06 MZ: -103.819E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 92 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.340E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 35.465E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -103.819E+00 LC: 101 Loc: 0.850 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.132E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.087 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.285 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.850 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.064 101 0.000E+00 |
| Bend Major 0.294 101 850.000E-03 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.087 101 850.000E-03 |
| Sec. 9.3.2.1 (Z) 0.285 101 850.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 93 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 22.550E-03 C FY: 74.944E-03 FZ: 1.409E-03 |
| MX: 6.738E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 93 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 22.550E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 22.550E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.409E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 119.316E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.352E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.046E-03 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.681 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.681 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.012 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.012 106 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.006 101 680.625E-03 |
| Sec. 9.3.2.2(ii) 0.005 101 680.625E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 94 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.293 Critical Load Case: 101 Location: 0.85 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.365E+00 T FY: 34.298E+00 FZ: 3.746E-03 |
| MX: -81.200E-09 MY: 1.144E-03 MZ: -103.463E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 94 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.746E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 35.337E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -103.463E+00 LC: 101 Loc: 0.850 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.040E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.086 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.284 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.850 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.064 101 0.000E+00 |
| Bend Major 0.293 101 850.000E-03 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.086 101 850.000E-03 |
| Sec. 9.3.2.1 (Z) 0.284 101 850.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 95 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.894 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 17.099E-03 C FY: 159.778E-03 FZ: 0.000E+00 |
| MX: -16.285E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 95 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 17.099E-03 LC: 101 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 17.099E-03 LC: 101 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.030 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 1.325 KLT: 0.9999 |
| Equation 2: Ratio: 0.027 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 1.325 Kz : 1.0001 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.2 (i) 0.030 101 1.325E+00 |
| Sec. 9.3.2.2(ii) 0.027 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 96 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.293 Critical Load Case: 101 Location: 0.85 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.365E+00 T FY: 34.298E+00 FZ: -3.746E-03 |
| MX: 81.200E-09 MY: -1.144E-03 MZ: -103.463E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 96 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.365E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.746E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 35.337E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -103.463E+00 LC: 101 Loc: 0.850 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.040E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.086 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.284 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.850 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.064 101 0.000E+00 |
| Bend Major 0.293 101 850.000E-03 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.086 101 850.000E-03 |
| Sec. 9.3.2.1 (Z) 0.284 101 850.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 97 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.294 Critical Load Case: 101 Location: 0.85 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.247E+00 T FY: 34.426E+00 FZ: -1.340E-03 |
| MX: -337.308E-09 MY: 992.882E-06 MZ: -103.819E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 12.000E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 97 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 21.247E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.011E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.340E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 35.465E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -103.819E+00 LC: 101 Loc: 0.850 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.132E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.087 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.285 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.850 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.010 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.064 101 0.000E+00 |
| Bend Major 0.294 101 850.000E-03 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.087 101 850.000E-03 |
| Sec. 9.3.2.1 (Z) 0.285 101 850.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 98 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.894 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 17.099E-03 C FY: 159.778E-03 FZ: 0.000E+00 |
| MX: 16.285E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 98 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 17.099E-03 LC: 101 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 17.099E-03 LC: 101 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.030 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 1.325 KLT: 0.9999 |
| Equation 2: Ratio: 0.027 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 1.325 Kz : 1.0001 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.2 (i) 0.030 101 1.325E+00 |
| Sec. 9.3.2.2(ii) 0.027 101 1.325E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 99 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.161 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 36.610E-03 C FY: -649.287E-03 FZ: 19.317E-03 |
| MX: 48.994E-03 MY: -2.736E-03 MZ: 191.130E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 850.000E-03 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 40.30 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 99 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 36.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 36.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 634.590E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 19.317E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.016E+00 LC: 106 Loc: 0.850 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: 890.465E-03 LC: 101 Loc: 0.850 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 13.684E-03 LC: 101 Loc: 0.850 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.018 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.850 KLT: 1.0000 |
| Equation 2: Ratio: 0.015 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.850 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 106 850.000E-03 |
| Bend Major 0.016 101 850.000E-03 |
| Bend Minor 0.001 101 850.000E-03 |
| Sec. 9.3.1.1 0.002 101 850.000E-03 |
| Sec. 9.3.2.2 (i) 0.018 101 850.000E-03 |
| Sec. 9.3.2.2(ii) 0.015 101 850.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 100 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.585E-03 C FY: 73.694E-03 FZ: -765.037E-06 |
| MX: -6.937E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 100 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.585E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.585E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -765.037E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 118.858E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.012E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -568.039E-06 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.619 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.619 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.012 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.012 106 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.006 101 618.750E-03 |
| Sec. 9.3.2.2(ii) 0.005 101 618.750E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 101 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.499 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 10.797E-03 C FY: 89.235E-03 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 124.79 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 101 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 10.797E-03 LC: 101 Loc: 0.000 |
| Capacity: 167.050E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 10.797E-03 LC: 101 Loc: 0.000 |
| Capacity: 73.219E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 89.235E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -33.017E-03 LC: 101 Loc: 0.740 |
| Capacity: 4.127E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.008 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.740 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.740 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.740 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.008 101 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.008 101 740.000E-03 |
| Sec. 9.3.2.2 (i) 0.008 101 740.000E-03 |
| Sec. 9.3.2.2(ii) 0.007 101 740.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 102 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -33.192E-03 T FY: 39.017E-03 FZ: -514.879E-06 |
| MX: 48.928E-03 MY: 514.879E-06 MZ: -165.054E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 102 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 33.192E-03 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 33.192E-03 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -514.879E-06 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -401.239E-03 LC: 106 Loc: 1.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -197.168E-03 LC: 106 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 514.879E-06 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.083 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 1.000E+00 |
| Bend Major 0.004 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.003 101 83.333E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 103 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.030E+00 C FY: -36.954E+00 FZ: 1.221E-03 |
| MX: 337.308E-09 MY: -1.002E-03 MZ: -37.565E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 103 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.221E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -38.177E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.565E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -1.002E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.117 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.108 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 1.000E+00 |
| Bend Major 0.106 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.011 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.117 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.108 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 104 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 3.821E-03 C FY: 126.888E-03 FZ: 1.931E-03 |
| MX: -7.713E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 104 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 3.821E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 3.821E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.931E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 134.051E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.292E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.433E-03 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.015 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 KLT: 1.0000 |
| Equation 2: Ratio: 0.013 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.015 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.015 101 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.015 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.013 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 105 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.157E+00 C FY: -36.808E+00 FZ: 634.702E-06 |
| MX: -81.200E-09 MY: -502.150E-06 MZ: -37.420E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 105 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 634.702E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -38.031E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.420E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -502.150E-06 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.117 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.108 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 1.000E+00 |
| Bend Major 0.106 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.011 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.117 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.108 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 106 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.559 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -2.091E-03 T FY: 159.778E-03 FZ: 0.000E+00 |
| MX: 17.472E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 106 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 2.091E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 2.091E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.030 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 107 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.157E+00 C FY: -36.808E+00 FZ: -634.702E-06 |
| MX: 81.200E-09 MY: 502.150E-06 MZ: -37.420E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 107 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -634.702E-06 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -38.031E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.420E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 502.150E-06 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.117 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.108 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 1.000E+00 |
| Bend Major 0.106 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.011 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.117 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.108 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 108 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.312 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -5.242E-03 T FY: 89.235E-03 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 124.79 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 108 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 5.242E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 5.242E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 167.050E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 73.219E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 89.235E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -33.017E-03 LC: 101 Loc: 0.740 |
| Capacity: 4.127E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.008 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.740 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.008 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.740 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.008 101 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.008 101 740.000E-03 |
| Sec. 9.3.2.1 (Z) 0.008 101 740.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 109 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.030E+00 C FY: -36.954E+00 FZ: -1.221E-03 |
| MX: -337.308E-09 MY: 1.002E-03 MZ: -37.565E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 109 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.030E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.221E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -38.177E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -37.565E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 1.002E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.117 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.108 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.069 101 1.000E+00 |
| Bend Major 0.106 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.011 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.117 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.108 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 110 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.559 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -2.091E-03 T FY: 159.778E-03 FZ: 0.000E+00 |
| MX: -17.472E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 110 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 2.091E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 2.091E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.030 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 111 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -33.192E-03 T FY: 39.017E-03 FZ: 514.879E-06 |
| MX: -48.928E-03 MY: -514.879E-06 MZ: -165.054E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 111 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 33.192E-03 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 33.192E-03 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 514.879E-06 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -401.239E-03 LC: 106 Loc: 1.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -197.168E-03 LC: 106 Loc: 0.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -514.879E-06 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.083 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 1.000E+00 |
| Bend Major 0.004 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.003 101 83.333E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 112 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 2.355E-03 C FY: 126.233E-03 FZ: 639.853E-06 |
| MX: 7.430E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 112 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 2.355E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 2.355E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 639.853E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 133.832E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.130E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 475.090E-06 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.014 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.742 KLT: 1.0000 |
| Equation 2: Ratio: 0.012 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.742 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.015 106 742.500E-03 |
| Bend Minor 0.000 101 742.500E-03 |
| Sec. 9.3.1.3 0.015 106 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.014 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.012 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 113 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -35.123E-03 T FY: 574.046E-03 FZ: 3.306E-03 |
| MX: 48.928E-03 MY: -2.791E-03 MZ: 197.208E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 999.999E-03 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 113 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 35.123E-03 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 35.123E-03 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.306E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 574.046E-03 LC: 101 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -199.851E-03 LC: 106 Loc: 1.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.791E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.004 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.004 106 999.999E-03 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.004 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 114 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.029E+00 C FY: -35.445E+00 FZ: -3.225E-03 |
| MX: 337.308E-09 MY: 2.223E-03 MZ: -73.614E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 12.000E+00 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 114 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.029E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.029E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.225E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -36.668E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -73.614E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.223E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.044 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.219 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.201 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.066 101 999.999E-03 |
| Bend Major 0.209 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.044 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.219 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.201 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 115 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -22.893E-03 T FY: 75.406E-03 FZ: 1.414E-03 |
| MX: -6.732E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 115 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 22.893E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 22.893E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.414E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 119.315E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.351E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.050E-03 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.743 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.619 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.012 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.012 106 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.005 101 618.750E-03 |
| Sec. 9.3.2.1 (Y) 0.001 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 116 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.157E+00 C FY: -35.336E+00 FZ: -2.517E-03 |
| MX: -81.200E-09 MY: 2.014E-03 MZ: -73.368E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 12.000E+00 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 116 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.517E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -36.559E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -73.368E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 2.014E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.043 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.219 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.200 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.066 101 999.999E-03 |
| Bend Major 0.208 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.043 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.219 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.200 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 117 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.559 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -16.200E-03 T FY: 159.778E-03 FZ: 0.000E+00 |
| MX: 16.035E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 117 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 16.200E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 16.200E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.030 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 118 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.157E+00 C FY: -35.336E+00 FZ: 2.517E-03 |
| MX: 81.200E-09 MY: -2.014E-03 MZ: -73.368E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 12.000E+00 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 118 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.157E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.517E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -36.559E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -73.368E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.014E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.043 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.219 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.200 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.066 101 999.999E-03 |
| Bend Major 0.208 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.043 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.219 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.200 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 119 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.312 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -9.978E-03 T FY: 89.235E-03 FZ: 0.000E+00 |
| MX: 0.000E+00 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.480E+00 |
| Parameters: LZ: 1.480E+00 LY: 1.480E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 124.79 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 119 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 9.978E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 9.978E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 167.050E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 73.219E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 89.235E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.480E+00 General |
| Major Axis: Design Force: -33.017E-03 LC: 101 Loc: 0.740 |
| Capacity: 4.127E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.008 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.740 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.008 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.740 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.008 101 740.000E-03 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.008 101 740.000E-03 |
| Sec. 9.3.2.1 (Z) 0.008 101 740.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 120 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.265 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.029E+00 C FY: -35.445E+00 FZ: 3.225E-03 |
| MX: -337.308E-09 MY: -2.223E-03 MZ: -73.614E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 12.000E+00 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 120 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.029E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.029E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.225E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -36.668E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -73.614E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -2.223E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.044 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.219 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 KLT: 0.9995 |
| Equation 2: Ratio: 0.201 As per: Sec. 9.3.2.2 Ky : 1.0018 |
| LC: 101 Loc: 0.000 Kz : 1.0065 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.066 101 999.999E-03 |
| Bend Major 0.209 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.044 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.219 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.201 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 121 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.559 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -16.200E-03 T FY: 159.778E-03 FZ: 0.000E+00 |
| MX: -16.035E-06 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 2.650E+00 |
| Parameters: LZ: 2.650E+00 LY: 2.650E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 223.44 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 121 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 16.200E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 16.200E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 110.933E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 27.719E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 159.778E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 2.650E+00 General |
| Major Axis: Design Force: -105.853E-03 LC: 101 Loc: 1.325 |
| Capacity: 3.556E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.030 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.325 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.030 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.325 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 0 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.030 101 1.325E+00 |
| Bend Minor 0.000 0 0.000E+00 |
| Sec. 9.3.1.3 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Z) 0.030 101 1.325E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 122 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -35.123E-03 T FY: 574.046E-03 FZ: -3.306E-03 |
| MX: -48.928E-03 MY: 2.791E-03 MZ: 197.208E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 999.999E-03 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 122 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 35.123E-03 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 35.123E-03 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.306E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 574.046E-03 LC: 101 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -199.851E-03 LC: 106 Loc: 1.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 2.791E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.004 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.004 106 999.999E-03 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.004 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 123 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.942E-03 T FY: 74.165E-03 FZ: -737.519E-06 |
| MX: 6.930E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 123 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.942E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 21.942E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -737.519E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 118.858E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.012E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -547.608E-06 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.619 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.012 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.012 106 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.005 101 618.750E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 124 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.141 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 497.358E-06 C FY: 671.795E-03 FZ: -33.269E-03 |
| MX: 0.000E+00 MY: 24.702E-03 MZ: 337.308E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 124 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 497.358E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 497.358E-06 LC: 101 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -33.269E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 703.887E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 393.550E-03 LC: 106 Loc: 0.000 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 24.702E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.008 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 0.000E+00 |
| Bend Major 0.007 106 0.000E+00 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.1 0.002 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.008 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.007 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 125 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -3.730E-03 T FY: -37.272E-03 FZ: -1.932E-03 |
| MX: -7.726E-03 MY: 1.435E-03 MZ: -60.915E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 125 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 3.730E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 3.730E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.932E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -134.054E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.295E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.435E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.014 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.015 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.015 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.014 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 126 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.243 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -106.358E-03 T FY: 132.984E-03 FZ: 230.965E-06 |
| MX: 7.841E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 2.850E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 126 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 106.358E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 106.358E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 230.965E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 132.984E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -72.691E-03 LC: 101 Loc: 1.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 230.965E-06 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.017 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.016 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.001 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.017 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.3 0.017 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.016 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 127 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 22.550E-03 C FY: 14.593E-03 FZ: -1.409E-03 |
| MX: -6.738E-03 MY: 1.046E-03 MZ: -22.405E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 127 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 22.550E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 22.550E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.409E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -119.316E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.352E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.046E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.062 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.062 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.012 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.012 106 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.006 101 61.875E-03 |
| Sec. 9.3.2.2(ii) 0.005 101 61.875E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 128 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.243 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -108.918E-03 T FY: 86.281E-03 FZ: 1.715E-03 |
| MX: 7.351E-03 MY: -738.202E-06 MZ: -72.407E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 2.850E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 128 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 108.918E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 108.918E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.715E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 86.281E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -103.202E-03 LC: 101 Loc: 0.750 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 976.651E-06 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.025 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.750 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.023 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.750 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.001 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.024 101 750.000E-03 |
| Bend Minor 0.001 101 1.000E+00 |
| Sec. 9.3.1.3 0.025 101 750.000E-03 |
| Sec. 9.3.2.1 (Z) 0.023 101 750.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 129 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 214.494E-03 C FY: -229.280E-03 FZ: -10.416E-03 |
| MX: -292.151E-03 MY: -17.428E-03 MZ: -479.006E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 129 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 214.494E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 214.494E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -10.416E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.137E+00 LC: 101 Loc: 0.743 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -479.006E-03 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -25.162E-03 LC: 101 Loc: 0.743 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 742.500E-03 |
| Bend Major 0.001 101 0.000E+00 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.1 0.001 101 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.002 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.002 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 130 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.243 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -109.561E-03 T FY: -64.742E-03 FZ: 749.958E-06 |
| MX: 6.423E-03 MY: -637.464E-06 MZ: -98.593E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 2.850E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 130 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 109.561E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 109.561E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 137.378E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 749.958E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -167.241E-03 LC: 101 Loc: 0.850 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -98.592E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.413E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -637.464E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.023 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.022 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.001 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 850.000E-03 |
| Bend Major 0.022 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.023 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.022 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 131 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 7.610E-03 C FY: -295.892E-03 FZ: 77.274E-03 |
| MX: 221.851E-06 MY: -77.702E-03 MZ: -515.577E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 131 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 7.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 7.610E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 77.274E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.204E+00 LC: 101 Loc: 0.743 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -515.577E-03 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -77.702E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 742.500E-03 |
| Bend Major 0.001 101 0.000E+00 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.1 0.002 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.003 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.002 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 132 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.269 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -96.506E-03 T FY: 251.180E-03 FZ: 933.000E-06 |
| MX: 5.005E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 132 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 96.506E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 96.506E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 933.000E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 251.180E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -190.886E-03 LC: 101 Loc: 1.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 933.000E-06 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.045 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.043 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 0.000E+00 |
| Bend Major 0.044 101 1.000E+00 |
| Bend Minor 0.001 101 1.000E+00 |
| Sec. 9.3.1.3 0.045 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.043 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 133 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.062 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -211.861E-03 T FY: -224.683E-03 FZ: -10.865E-03 |
| MX: 292.162E-03 MY: -16.389E-03 MZ: -475.718E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 133 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 211.861E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 211.861E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -10.865E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.133E+00 LC: 101 Loc: 0.743 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -475.718E-03 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -24.456E-03 LC: 101 Loc: 0.743 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 742.500E-03 |
| Bend Major 0.001 101 0.000E+00 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.1 0.001 101 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 134 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.430 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 91.653E-03 C FY: 273.495E-03 FZ: 1.174E-03 |
| MX: -1.032E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 134 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 91.653E-03 LC: 101 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 91.653E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.174E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 273.495E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -213.201E-03 LC: 101 Loc: 1.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.174E-03 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.051 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.051 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 1.000 KLT: 0.9999 |
| Equation 2: Ratio: 0.046 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 1.000 Kz : 1.0008 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.006 101 0.000E+00 |
| Bend Major 0.049 101 1.000E+00 |
| Bend Minor 0.001 101 1.000E+00 |
| Sec. 9.3.1.3 0.051 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.051 101 1.000E+00 |
| Sec. 9.3.2.2(ii) 0.046 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 135 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -22.893E-03 T FY: 14.130E-03 FZ: -1.414E-03 |
| MX: 6.732E-03 MY: 1.050E-03 MZ: -22.749E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 135 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 22.893E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 22.893E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.414E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -119.315E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.351E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.050E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.124 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.012 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.012 106 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 123.750E-03 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 136 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.389 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 109.360E-03 C FY: 166.528E-03 FZ: 743.702E-06 |
| MX: -6.419E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 2.850E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 136 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 109.360E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 109.360E-03 LC: 101 Loc: 0.000 |
| Capacity: 137.378E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 743.702E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 166.528E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -97.987E-03 LC: 101 Loc: 0.850 |
| Capacity: 4.413E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 632.147E-06 LC: 101 Loc: 0.850 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.023 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.024 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 0.850 KLT: 0.9999 |
| Equation 2: Ratio: 0.021 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 0.850 Kz : 1.0009 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.022 101 850.000E-03 |
| Bend Minor 0.001 101 850.000E-03 |
| Sec. 9.3.1.3 0.023 101 850.000E-03 |
| Sec. 9.3.2.2 (i) 0.024 101 850.000E-03 |
| Sec. 9.3.2.2(ii) 0.021 101 850.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 137 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 3.821E-03 C FY: -37.352E-03 FZ: -1.931E-03 |
| MX: 7.713E-03 MY: 1.433E-03 MZ: -60.974E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 137 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 3.821E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 3.821E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.931E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -134.051E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.292E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.433E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.015 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.013 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.015 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.015 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.015 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.013 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 138 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.389 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 108.683E-03 C FY: 34.528E-03 FZ: 1.695E-03 |
| MX: -7.340E-03 MY: -965.347E-06 MZ: -97.788E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 2.850E+00 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 138 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 108.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 108.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 1.695E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -86.060E-03 LC: 101 Loc: 1.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -102.652E-03 LC: 101 Loc: 0.250 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -965.347E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.025 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.250 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.025 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.250 KLT: 0.9999 |
| Equation 2: Ratio: 0.023 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.250 Kz : 1.0009 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 999.999E-03 |
| Bend Major 0.024 101 250.000E-03 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.025 101 250.000E-03 |
| Sec. 9.3.2.2 (i) 0.025 101 250.000E-03 |
| Sec. 9.3.2.2(ii) 0.023 101 250.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 139 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.088 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -514.879E-06 T FY: 672.171E-03 FZ: -33.192E-03 |
| MX: 0.000E+00 MY: 24.645E-03 MZ: 337.653E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 139 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 514.879E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 514.879E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -33.192E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 704.285E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 393.846E-03 LC: 106 Loc: 0.000 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 24.645E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.006 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 106 0.000E+00 |
| Bend Major 0.007 106 0.000E+00 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.1 0.002 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.006 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.002 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 140 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.389 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 106.113E-03 C FY: -12.011E-03 FZ: 228.811E-06 |
| MX: -7.827E-03 MY: -228.811E-06 MZ: -72.305E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 2.850E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 140 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 106.113E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 106.113E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.359E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 228.811E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -132.599E-03 LC: 101 Loc: 1.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -72.305E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -228.811E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.017 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.018 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.000 KLT: 0.9999 |
| Equation 2: Ratio: 0.016 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.000 Kz : 1.0008 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 101 1.000E+00 |
| Bend Major 0.017 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.3 0.017 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.018 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.016 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 141 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.413 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -12.260E+00 T FY: 16.153E+00 FZ: 9.030E-03 |
| MX: -337.308E-09 MY: 3.868E-03 MZ: -145.842E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 141 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 12.260E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 12.260E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 9.030E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 17.376E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -145.842E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -5.162E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.171 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.408 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.006 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.031 101 0.000E+00 |
| Bend Major 0.413 101 1.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.171 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.408 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 142 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.269 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -93.912E-03 T FY: 88.377E-03 FZ: 4.755E-03 |
| MX: 3.261E-03 MY: -2.297E-03 MZ: -190.503E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 142 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 93.912E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 93.912E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.359E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 4.755E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 88.377E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -222.870E-03 LC: 101 Loc: 0.750 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 2.457E-03 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.053 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.917 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.051 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.750 |
| Equation 2(Y): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.051 101 750.000E-03 |
| Bend Minor 0.002 101 1.000E+00 |
| Sec. 9.3.1.3 0.053 101 916.667E-03 |
| Sec. 9.3.2.1 (Z) 0.051 101 750.000E-03 |
| Sec. 9.3.2.1 (Y) 0.002 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 143 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -15.185E-03 T FY: 67.254E-03 FZ: -3.473E-03 |
| MX: -3.922E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 143 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 15.185E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 15.185E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.473E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 122.459E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -57.685E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.578E-03 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.013 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.004 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.557 |
| Equation 2(Y): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.013 106 742.500E-03 |
| Bend Minor 0.002 101 742.500E-03 |
| Sec. 9.3.1.3 0.013 106 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.004 101 556.875E-03 |
| Sec. 9.3.2.1 (Y) 0.002 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 144 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.190 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 81.045E-06 C FY: 331.108E-03 FZ: -5.014E-03 |
| MX: 20.607E-03 MY: 2.515E-03 MZ: -10.773E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 144 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 81.045E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 81.045E-06 LC: 101 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -5.014E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 398.472E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -157.524E-03 LC: 106 Loc: 1.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 2.515E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.833 KLT: 1.0000 |
| Equation 2: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.833 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.003 106 1.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.003 101 833.333E-03 |
| Sec. 9.3.2.2(ii) 0.003 101 833.333E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 145 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -19.006E-03 T FY: 19.933E-03 FZ: -878.258E-06 |
| MX: -4.306E-03 MY: 652.107E-06 MZ: -18.440E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 145 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 19.006E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 19.006E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -878.258E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -123.217E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -58.248E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 652.107E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.013 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.004 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.186 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.013 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.013 106 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.004 101 185.625E-03 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 146 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.428 Critical Load Case: 101 Location: 1.15 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 485.566E-03 C FY: 2.703E+00 FZ: -2.736E-03 |
| MX: -337.308E-09 MY: 720.883E-06 MZ: -150.957E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 146 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 12.264E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 12.264E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 485.566E-03 LC: 101 Loc: 0.192 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 485.566E-03 LC: 101 Loc: 0.192 |
| Capacity: 1.921E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -2.736E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 16.110E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -150.957E+00 LC: 101 Loc: 1.150 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 3.868E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.183 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.150 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.412 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.096 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.428 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.150 KLT: 1.0000 |
| Equation 2: Ratio: 0.385 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.150 Kz : 1.0001 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.006 101 0.000E+00 |
| Compression 0.000 101 191.667E-03 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.029 101 0.000E+00 |
| Bend Major 0.428 101 1.150E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.183 101 1.150E+00 |
| Sec. 9.3.2.1 (Z) 0.412 101 95.833E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.428 101 1.150E+00 |
| Sec. 9.3.2.2(ii) 0.385 101 1.150E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 147 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.269 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -90.270E-03 T FY: -121.057E-03 FZ: 914.154E-06 |
| MX: 1.172E-03 MY: -1.051E-03 MZ: -218.954E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 147 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 90.270E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 90.270E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.615E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 914.154E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -259.733E-03 LC: 101 Loc: 1.150 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -218.954E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.277E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -1.051E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.053 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.051 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 1.150E+00 |
| Bend Major 0.051 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.053 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.051 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 148 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 11.766E-03 C FY: 43.706E-03 FZ: -4.184E-03 |
| MX: -2.479E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 148 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 11.766E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 11.766E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -4.184E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 118.031E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -54.398E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -3.106E-03 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.495 KLT: 1.0000 |
| Equation 2: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 202 Loc: 0.557 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 0.000E+00 |
| Bend Major 0.012 106 742.500E-03 |
| Bend Minor 0.003 101 742.500E-03 |
| Sec. 9.3.1.3 0.012 106 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.003 101 495.000E-03 |
| Sec. 9.3.2.2(ii) 0.003 202 556.875E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 149 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.218 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 622.754E-06 C FY: -123.554E-03 FZ: 10.593E-03 |
| MX: 20.607E-03 MY: -2.499E-03 MZ: -139.920E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 1.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 54.53 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 149 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 622.754E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 622.754E-06 LC: 101 Loc: 0.000 |
| Capacity: 583.785E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 10.593E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -597.923E-03 LC: 106 Loc: 1.150 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: 272.052E-03 LC: 101 Loc: 1.150 |
| Capacity: 50.686E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 9.683E-03 LC: 101 Loc: 1.150 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.150 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 106 1.150E+00 |
| Bend Major 0.005 101 1.150E+00 |
| Bend Minor 0.001 101 1.150E+00 |
| Sec. 9.3.1.1 0.001 101 1.150E+00 |
| Sec. 9.3.2.2 (i) 0.006 101 1.150E+00 |
| Sec. 9.3.2.2(ii) 0.005 101 1.150E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 150 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 15.607E-03 C FY: 43.017E-03 FZ: -541.709E-06 |
| MX: -2.110E-03 MY: 402.219E-06 MZ: -1.301E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 150 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 15.607E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 15.607E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -541.709E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -118.889E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.035E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 402.219E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 202 Loc: 0.248 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 202 Loc: 0.248 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.012 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.3 0.012 106 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.002 202 247.500E-03 |
| Sec. 9.3.2.2(ii) 0.002 202 247.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 151 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.425 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 12.041E+00 C FY: -15.714E+00 FZ: 8.964E-03 |
| MX: -337.308E-09 MY: -4.888E-03 MZ: -147.893E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 151 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 12.041E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 12.041E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 8.964E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -16.937E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -147.893E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -4.888E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.176 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.425 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 0.000 KLT: 0.9997 |
| Equation 2: Ratio: 0.385 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 0.000 Kz : 1.0037 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.007 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.031 101 1.000E+00 |
| Bend Major 0.419 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.176 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.425 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.385 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 152 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.430 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 95.414E-03 C FY: 46.504E-03 FZ: 4.821E-03 |
| MX: -2.994E-03 MY: -2.471E-03 MZ: -212.827E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 152 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 95.414E-03 LC: 101 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 95.414E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.359E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 4.821E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -74.084E-03 LC: 101 Loc: 1.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -221.736E-03 LC: 101 Loc: 0.417 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.471E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.052 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.250 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.053 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 0.250 KLT: 0.9999 |
| Equation 2: Ratio: 0.047 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 0.250 Kz : 1.0008 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 1.000E+00 |
| Bend Major 0.051 101 416.667E-03 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.3 0.052 101 250.000E-03 |
| Sec. 9.3.2.2 (i) 0.053 101 250.000E-03 |
| Sec. 9.3.2.2(ii) 0.047 101 250.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 153 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -14.573E-03 T FY: 35.013E-03 FZ: -4.335E-03 |
| MX: 2.200E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 153 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 14.573E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 14.573E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -4.335E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 109.681E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -48.198E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -3.219E-03 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
| Equation 2(Y): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.742 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 0.000E+00 |
| Bend Major 0.011 106 742.500E-03 |
| Bend Minor 0.003 101 742.500E-03 |
| Sec. 9.3.1.3 0.011 106 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.002 101 742.500E-03 |
| Sec. 9.3.2.1 (Y) 0.003 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 154 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -110.974E-06 T FY: 148.933E-03 FZ: -5.116E-03 |
| MX: -20.667E-03 MY: 2.461E-03 MZ: -116.561E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 154 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 110.974E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 110.974E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -5.116E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -320.108E-03 LC: 106 Loc: 1.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -151.733E-03 LC: 106 Loc: 0.250 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.655E-03 LC: 101 Loc: 1.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.333 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 1.000E+00 |
| Bend Major 0.003 106 250.000E-03 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.003 101 333.333E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 155 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -18.220E-03 T FY: 51.880E-03 FZ: -574.216E-06 |
| MX: 1.826E-03 MY: 426.356E-06 MZ: 5.281E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 155 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 18.220E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 18.220E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -574.216E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -110.487E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -48.796E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 426.356E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 202 Loc: 0.309 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 742.500E-03 |
| Bend Major 0.011 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.3 0.011 106 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.002 202 309.375E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 156 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.379 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 12.037E+00 C FY: -17.010E+00 FZ: -3.617E-03 |
| MX: -337.308E-09 MY: 4.076E-03 MZ: -131.571E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 156 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.037E+00 LC: 101 Loc: 0.479 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.037E+00 LC: 101 Loc: 0.479 |
| Capacity: 1.921E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.617E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -30.417E+00 LC: 101 Loc: 1.150 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -131.571E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 4.076E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.139 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.379 As per: Sec. 9.3.2.2 Ky : 1.0014 |
| LC: 101 Loc: 0.000 KLT: 0.9997 |
| Equation 2: Ratio: 0.344 As per: Sec. 9.3.2.2 Ky : 1.0014 |
| LC: 101 Loc: 0.000 Kz : 1.0037 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 479.167E-03 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.055 101 1.150E+00 |
| Bend Major 0.373 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.139 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.379 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.344 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 157 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.430 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 98.153E-03 C FY: -104.034E-03 FZ: 761.729E-06 |
| MX: -4.884E-03 MY: -875.989E-06 MZ: -199.377E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 157 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 98.153E-03 LC: 101 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 98.153E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.615E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 761.729E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -242.709E-03 LC: 101 Loc: 1.150 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -199.377E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.277E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -875.989E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.048 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.048 As per: Sec. 9.3.2.2 Ky : 1.0008 |
| LC: 101 Loc: 0.000 KLT: 0.9999 |
| Equation 2: Ratio: 0.044 As per: Sec. 9.3.2.2 Ky : 1.0008 |
| LC: 101 Loc: 0.000 Kz : 1.0009 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 1.150E+00 |
| Bend Major 0.047 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.048 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.048 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.044 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 158 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 12.581E-03 C FY: 73.289E-03 FZ: -3.542E-03 |
| MX: 3.690E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 158 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 12.581E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 12.581E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -3.542E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 129.643E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -63.019E-03 LC: 106 Loc: 0.742 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.630E-03 LC: 101 Loc: 0.742 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.014 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.742 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.742 KLT: 1.0000 |
| Equation 2: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.681 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.014 106 742.500E-03 |
| Bend Minor 0.002 101 742.500E-03 |
| Sec. 9.3.1.3 0.014 106 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.007 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.006 101 680.625E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 159 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.218 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 692.316E-06 C FY: -335.042E-03 FZ: 11.524E-03 |
| MX: -20.667E-03 MY: -2.655E-03 MZ: -57.392E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 1.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 54.53 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 159 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 692.316E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 692.316E-06 LC: 101 Loc: 0.000 |
| Capacity: 583.785E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 11.524E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -919.930E-03 LC: 106 Loc: 1.150 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: 762.892E-03 LC: 106 Loc: 1.150 |
| Capacity: 50.686E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 10.598E-03 LC: 101 Loc: 1.150 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.150 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.013 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 KLT: 1.0000 |
| Equation 2: Ratio: 0.011 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.006 106 1.150E+00 |
| Bend Major 0.015 106 1.150E+00 |
| Bend Minor 0.001 101 1.150E+00 |
| Sec. 9.3.1.1 0.001 101 1.150E+00 |
| Sec. 9.3.2.2 (i) 0.013 101 1.150E+00 |
| Sec. 9.3.2.2(ii) 0.011 101 1.150E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 160 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 16.640E-03 C FY: 13.703E-03 FZ: -803.290E-06 |
| MX: 4.031E-03 MY: 596.443E-06 MZ: -23.066E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 160 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 16.640E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 16.640E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -803.290E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -130.458E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -63.625E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 596.443E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.014 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.062 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.124 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.014 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.014 106 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.006 101 61.875E-03 |
| Sec. 9.3.2.2(ii) 0.005 101 123.750E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 161 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.141 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 728.323E-06 C FY: -804.779E-03 FZ: -73.089E-03 |
| MX: 0.000E+00 MY: 24.702E-03 MZ: 329.467E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 161 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 728.323E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 728.323E-06 LC: 101 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -73.089E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.108E+00 LC: 101 Loc: 0.743 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 0.743 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -29.567E-03 LC: 101 Loc: 0.743 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.022 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 KLT: 1.0000 |
| Equation 2: Ratio: 0.019 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.743 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 101 742.500E-03 |
| Bend Major 0.020 106 742.500E-03 |
| Bend Minor 0.003 101 742.500E-03 |
| Sec. 9.3.1.1 0.003 101 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.022 101 742.500E-03 |
| Sec. 9.3.2.2(ii) 0.019 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 162 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -2.246E-03 T FY: -36.612E-03 FZ: -626.984E-06 |
| MX: 7.442E-03 MY: 465.536E-06 MZ: -60.425E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 162 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 2.246E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 2.246E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -626.985E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -133.835E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.132E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 465.536E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.014 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.015 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.3 0.015 106 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.014 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 163 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.243 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -106.358E-03 T FY: 132.984E-03 FZ: -230.965E-06 |
| MX: -7.841E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 2.850E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 163 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 106.358E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 106.358E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -230.965E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 132.984E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -72.690E-03 LC: 101 Loc: 1.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -230.965E-06 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.017 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.016 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.001 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 101 0.000E+00 |
| Bend Major 0.017 101 1.000E+00 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.3 0.017 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.016 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 164 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 21.585E-03 C FY: 15.842E-03 FZ: 765.036E-06 |
| MX: 6.937E-03 MY: -568.039E-06 MZ: -21.477E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 164 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.585E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.585E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 765.036E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -118.858E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.012E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -568.039E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.124 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.124 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.012 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.012 106 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.006 101 123.750E-03 |
| Sec. 9.3.2.2(ii) 0.005 101 123.750E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 165 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.243 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -108.917E-03 T FY: 86.281E-03 FZ: -1.715E-03 |
| MX: -7.351E-03 MY: 738.203E-06 MZ: -72.407E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 2.850E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 165 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 108.917E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 108.917E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.715E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 86.281E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -103.202E-03 LC: 101 Loc: 0.750 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -976.651E-06 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.025 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.750 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.023 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.750 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.001 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.024 101 750.000E-03 |
| Bend Minor 0.001 101 1.000E+00 |
| Sec. 9.3.1.3 0.025 101 750.000E-03 |
| Sec. 9.3.2.1 (Z) 0.023 101 750.000E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 166 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 214.677E-03 C FY: -189.140E-03 FZ: 23.472E-03 |
| MX: 292.151E-03 MY: -17.428E-03 MZ: -477.588E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 166 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 214.677E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 214.677E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 23.472E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.097E+00 LC: 101 Loc: 0.743 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -477.588E-03 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -17.428E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 742.500E-03 |
| Bend Major 0.001 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.002 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.002 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 167 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.243 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -109.561E-03 T FY: -64.741E-03 FZ: -749.958E-06 |
| MX: -6.423E-03 MY: 637.464E-06 MZ: -98.592E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 2.850E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 167 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 109.561E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 109.561E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 137.378E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -749.958E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -167.241E-03 LC: 101 Loc: 0.850 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -98.592E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.413E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 637.464E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.023 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.022 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.001 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 850.000E-03 |
| Bend Major 0.022 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.023 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.022 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 168 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.269 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -96.506E-03 T FY: 251.180E-03 FZ: -932.999E-06 |
| MX: -5.005E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 168 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 96.506E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 96.506E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -933.000E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 251.180E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -190.886E-03 LC: 101 Loc: 1.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -932.999E-06 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.045 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.043 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 0.000E+00 |
| Bend Major 0.044 101 1.000E+00 |
| Bend Minor 0.001 101 1.000E+00 |
| Sec. 9.3.1.3 0.045 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.043 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 169 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.099 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 7.870E-03 C FY: -237.335E-03 FZ: 104.649E-03 |
| MX: -221.851E-06 MY: -77.702E-03 MZ: -513.373E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 169 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 7.870E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 7.870E-03 LC: 101 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 104.649E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.145E+00 LC: 101 Loc: 0.743 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -513.373E-03 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -77.702E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.002 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 742.500E-03 |
| Bend Major 0.001 101 0.000E+00 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.1 0.002 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.003 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.002 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 170 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.430 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 91.653E-03 C FY: 273.495E-03 FZ: -1.174E-03 |
| MX: 1.032E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 170 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 91.653E-03 LC: 101 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 91.653E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.174E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 273.495E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -213.201E-03 LC: 101 Loc: 1.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -1.174E-03 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.051 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.051 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 1.000 KLT: 0.9999 |
| Equation 2: Ratio: 0.046 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 1.000 Kz : 1.0008 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.006 101 0.000E+00 |
| Bend Major 0.049 101 1.000E+00 |
| Bend Minor 0.001 101 1.000E+00 |
| Sec. 9.3.1.3 0.051 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.051 101 1.000E+00 |
| Sec. 9.3.2.2(ii) 0.046 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 171 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.062 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -211.879E-03 T FY: -184.554E-03 FZ: 22.072E-03 |
| MX: -292.162E-03 MY: -16.389E-03 MZ: -474.183E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 742.500E-03 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 24.70 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 171 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 211.879E-03 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 211.879E-03 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.098E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 2.042E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 22.072E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.093E+00 LC: 101 Loc: 0.743 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -474.183E-03 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -16.389E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 742.500E-03 |
| Bend Major 0.001 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.001 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 172 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -21.942E-03 T FY: 15.371E-03 FZ: 737.519E-06 |
| MX: -6.930E-03 MY: -547.608E-06 MZ: -21.827E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 172 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 21.942E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 21.942E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 737.519E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -118.858E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.012E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -547.608E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.005 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.124 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.012 106 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.012 106 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.005 101 123.750E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 173 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.389 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 109.360E-03 C FY: 166.528E-03 FZ: -743.702E-06 |
| MX: 6.419E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 850.000E-03 |
| Parameters: LZ: 2.850E+00 LY: 850.000E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 173 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 109.360E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 109.360E-03 LC: 101 Loc: 0.000 |
| Capacity: 137.378E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -743.702E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 166.528E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 850.000E-03 General |
| Major Axis: Design Force: -97.986E-03 LC: 101 Loc: 0.850 |
| Capacity: 4.413E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -632.147E-06 LC: 101 Loc: 0.850 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.023 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.850 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.024 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 0.850 KLT: 0.9999 |
| Equation 2: Ratio: 0.021 As per: Sec. 9.3.2.2 Ky : 1.0005 |
| LC: 101 Loc: 0.850 Kz : 1.0009 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 101 0.000E+00 |
| Bend Major 0.022 101 850.000E-03 |
| Bend Minor 0.001 101 850.000E-03 |
| Sec. 9.3.1.3 0.023 101 850.000E-03 |
| Sec. 9.3.2.2 (i) 0.024 101 850.000E-03 |
| Sec. 9.3.2.2(ii) 0.021 101 850.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 174 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 2.355E-03 C FY: -36.697E-03 FZ: -639.851E-06 |
| MX: -7.430E-03 MY: 475.090E-06 MZ: -60.488E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 174 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 2.355E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 2.355E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -639.851E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -133.832E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -66.130E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 475.090E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.015 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.014 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.012 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.015 106 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.3 0.015 106 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.014 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.012 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 175 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.389 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 108.683E-03 C FY: 34.528E-03 FZ: -1.695E-03 |
| MX: 7.340E-03 MY: 965.348E-06 MZ: -97.788E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 999.999E-03 |
| Parameters: LZ: 2.850E+00 LY: 999.999E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 175 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 108.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 108.683E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.360E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -1.695E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -86.060E-03 LC: 101 Loc: 1.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 999.999E-03 General |
| Major Axis: Design Force: -102.652E-03 LC: 101 Loc: 0.250 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 965.348E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.025 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.250 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.025 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.250 KLT: 0.9999 |
| Equation 2: Ratio: 0.023 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.250 Kz : 1.0009 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 999.999E-03 |
| Bend Major 0.024 101 250.000E-03 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.025 101 250.000E-03 |
| Sec. 9.3.2.2 (i) 0.025 101 250.000E-03 |
| Sec. 9.3.2.2(ii) 0.023 101 250.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 176 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.088 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -743.690E-06 T FY: -804.770E-03 FZ: -72.921E-03 |
| MX: 0.000E+00 MY: 24.645E-03 MZ: 329.826E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 35.21 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 176 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 743.690E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 743.690E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 650.646E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -72.921E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -1.108E+00 LC: 101 Loc: 0.743 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: 1.098E+00 LC: 106 Loc: 0.743 |
| Capacity: 54.545E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -29.499E-03 LC: 101 Loc: 0.743 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.003 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.743 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.019 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
| Equation 2(Y): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.007 101 742.500E-03 |
| Bend Major 0.020 106 742.500E-03 |
| Bend Minor 0.003 101 742.500E-03 |
| Sec. 9.3.1.1 0.003 101 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.019 101 742.500E-03 |
| Sec. 9.3.2.1 (Y) 0.003 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 177 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.389 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 106.113E-03 C FY: -12.011E-03 FZ: -228.811E-06 |
| MX: 7.827E-03 MY: 228.811E-06 MZ: -72.305E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 2.850E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 97.35 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 177 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 106.113E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.139E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 106.113E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.359E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -228.811E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -132.599E-03 LC: 101 Loc: 1.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -72.305E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 228.811E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.017 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.018 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.000 KLT: 0.9999 |
| Equation 2: Ratio: 0.016 As per: Sec. 9.3.2.2 Ky : 1.0007 |
| LC: 101 Loc: 0.000 Kz : 1.0008 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 101 1.000E+00 |
| Bend Major 0.017 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.3 0.017 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.018 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.016 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 178 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.269 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -93.912E-03 T FY: 88.376E-03 FZ: -4.755E-03 |
| MX: -3.261E-03 MY: 2.297E-03 MZ: -190.503E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 178 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 93.912E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 93.912E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 119.359E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -4.755E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 88.376E-03 LC: 101 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -222.870E-03 LC: 101 Loc: 0.750 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.457E-03 LC: 101 Loc: 1.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.053 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.917 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.051 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.750 |
| Equation 2(Y): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 0.000E+00 |
| Bend Major 0.051 101 750.000E-03 |
| Bend Minor 0.002 101 1.000E+00 |
| Sec. 9.3.1.3 0.053 101 916.667E-03 |
| Sec. 9.3.2.1 (Z) 0.051 101 750.000E-03 |
| Sec. 9.3.2.1 (Y) 0.002 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 179 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.269 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -90.270E-03 T FY: -121.057E-03 FZ: -914.153E-06 |
| MX: -1.172E-03 MY: 1.051E-03 MZ: -218.954E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 179 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 90.270E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 90.270E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 102.615E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -914.153E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -259.733E-03 LC: 101 Loc: 1.150 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -218.954E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.277E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 1.051E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.053 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.051 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 1.150E+00 |
| Bend Major 0.051 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.053 101 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.051 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.001 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 180 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.430 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 95.414E-03 C FY: 46.504E-03 FZ: -4.821E-03 |
| MX: 2.994E-03 MY: 2.471E-03 MZ: -212.827E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 180 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 95.414E-03 LC: 101 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 95.414E-03 LC: 101 Loc: 0.000 |
| Capacity: 119.359E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -4.821E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -74.084E-03 LC: 101 Loc: 1.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -221.736E-03 LC: 101 Loc: 0.417 |
| Capacity: 4.344E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 2.471E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.052 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.250 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.053 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 0.250 KLT: 0.9999 |
| Equation 2: Ratio: 0.047 As per: Sec. 9.3.2.2 Ky : 1.0006 |
| LC: 101 Loc: 0.250 Kz : 1.0008 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 101 1.000E+00 |
| Bend Major 0.051 101 416.667E-03 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.3 0.052 101 250.000E-03 |
| Sec. 9.3.2.2 (i) 0.053 101 250.000E-03 |
| Sec. 9.3.2.2(ii) 0.047 101 250.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 181 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.430 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 98.153E-03 C FY: -104.034E-03 FZ: -761.729E-06 |
| MX: 4.884E-03 MY: 875.988E-06 MZ: -199.377E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 3.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 107.59 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 181 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 98.153E-03 LC: 101 Loc: 0.000 |
| Capacity: 90.108E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 98.153E-03 LC: 101 Loc: 0.000 |
| Capacity: 102.615E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -761.729E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -242.709E-03 LC: 101 Loc: 1.150 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -199.377E-03 LC: 101 Loc: 0.000 |
| Capacity: 4.277E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 875.988E-06 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.048 As per: Sec. 9.3.1.3 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.048 As per: Sec. 9.3.2.2 Ky : 1.0008 |
| LC: 101 Loc: 0.000 KLT: 0.9999 |
| Equation 2: Ratio: 0.044 As per: Sec. 9.3.2.2 Ky : 1.0008 |
| LC: 101 Loc: 0.000 Kz : 1.0009 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.001 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.005 101 1.150E+00 |
| Bend Major 0.047 101 0.000E+00 |
| Bend Minor 0.001 101 0.000E+00 |
| Sec. 9.3.1.3 0.048 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.048 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.044 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 182 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.190 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 81.045E-06 C FY: 331.108E-03 FZ: 5.014E-03 |
| MX: -20.607E-03 MY: -2.515E-03 MZ: -10.773E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 182 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 81.045E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 81.045E-06 LC: 101 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 5.014E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 398.472E-03 LC: 106 Loc: 0.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -157.524E-03 LC: 106 Loc: 1.000 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.515E-03 LC: 101 Loc: 0.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.833 KLT: 1.0000 |
| Equation 2: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.833 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.003 106 1.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.2 (i) 0.003 101 833.333E-03 |
| Sec. 9.3.2.2(ii) 0.003 101 833.333E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 183 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -19.006E-03 T FY: 69.603E-03 FZ: 878.260E-06 |
| MX: 4.306E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 183 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 19.006E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 19.006E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 878.260E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 123.217E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -58.248E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 652.108E-06 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.013 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.743 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.004 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.557 |
| Equation 2(Y): Ratio: 0.001 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.013 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.013 106 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.004 101 556.875E-03 |
| Sec. 9.3.2.1 (Y) 0.001 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 184 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.413 Critical Load Case: 101 Location: 1.00 |
| Critical Condition: Sec. 8.2.1.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: -12.260E+00 T FY: 16.153E+00 FZ: -9.030E-03 |
| MX: 337.308E-09 MY: -3.868E-03 MZ: -145.842E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 184 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 12.260E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 12.260E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -9.030E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 17.376E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -145.842E+00 LC: 101 Loc: 1.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 5.162E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.171 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.408 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.006 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.031 101 0.000E+00 |
| Bend Major 0.413 101 1.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.171 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.408 101 1.000E+00 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 185 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -15.185E-03 T FY: 22.282E-03 FZ: 3.473E-03 |
| MX: 3.922E-03 MY: -2.578E-03 MZ: -16.696E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 185 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 15.185E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 15.185E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.473E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -122.459E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -57.685E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.578E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.013 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.004 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.186 |
| Equation 2(Y): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.013 106 0.000E+00 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.3 0.013 106 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.004 101 185.625E-03 |
| Sec. 9.3.2.1 (Y) 0.002 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 186 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.218 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 622.755E-06 C FY: -123.554E-03 FZ: -10.593E-03 |
| MX: -20.607E-03 MY: 2.499E-03 MZ: -139.920E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 1.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 54.53 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 186 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 622.755E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 622.755E-06 LC: 101 Loc: 0.000 |
| Capacity: 583.785E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -10.593E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -597.923E-03 LC: 106 Loc: 1.150 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: 272.052E-03 LC: 101 Loc: 1.150 |
| Capacity: 50.686E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -9.683E-03 LC: 101 Loc: 1.150 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.150 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.004 106 1.150E+00 |
| Bend Major 0.005 101 1.150E+00 |
| Bend Minor 0.001 101 1.150E+00 |
| Sec. 9.3.1.1 0.001 101 1.150E+00 |
| Sec. 9.3.2.2 (i) 0.006 101 1.150E+00 |
| Sec. 9.3.2.2(ii) 0.005 101 1.150E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 187 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 15.607E-03 C FY: 46.520E-03 FZ: 541.710E-06 |
| MX: 2.110E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 187 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 15.607E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 15.607E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 541.710E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 118.889E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -55.035E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 402.220E-06 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 202 Loc: 0.495 KLT: 1.0000 |
| Equation 2: Ratio: 0.002 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 202 Loc: 0.495 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.012 106 742.500E-03 |
| Bend Minor 0.000 101 742.500E-03 |
| Sec. 9.3.1.3 0.012 106 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.002 202 495.000E-03 |
| Sec. 9.3.2.2(ii) 0.002 202 495.000E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 188 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.428 Critical Load Case: 101 Location: 1.15 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 485.566E-03 C FY: 2.703E+00 FZ: 2.736E-03 |
| MX: 337.308E-09 MY: -720.883E-06 MZ: -150.957E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 188 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 12.264E+00 LC: 101 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 12.264E+00 LC: 101 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 485.566E-03 LC: 101 Loc: 0.192 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 485.566E-03 LC: 101 Loc: 0.192 |
| Capacity: 1.921E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 2.736E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 16.110E+00 LC: 101 Loc: 0.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -150.957E+00 LC: 101 Loc: 1.150 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -3.868E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.183 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.150 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.412 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.096 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 0 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.428 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.150 KLT: 1.0000 |
| Equation 2: Ratio: 0.385 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 1.150 Kz : 1.0001 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.006 101 0.000E+00 |
| Compression 0.000 101 191.667E-03 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.029 101 0.000E+00 |
| Bend Major 0.428 101 1.150E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.183 101 1.150E+00 |
| Sec. 9.3.2.1 (Z) 0.412 101 95.833E-03 |
| Sec. 9.3.2.1 (Y) 0.000 0 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.428 101 1.150E+00 |
| Sec. 9.3.2.2(ii) 0.385 101 1.150E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 189 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 11.766E-03 C FY: 45.830E-03 FZ: 4.184E-03 |
| MX: 2.479E-03 MY: -3.106E-03 MZ: 788.415E-06 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 189 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 11.766E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 11.766E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 4.184E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -118.031E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -54.398E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -3.106E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.012 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.248 KLT: 1.0000 |
| Equation 2: Ratio: 0.003 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 202 Loc: 0.186 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 742.500E-03 |
| Bend Major 0.012 106 0.000E+00 |
| Bend Minor 0.003 101 0.000E+00 |
| Sec. 9.3.1.3 0.012 106 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.003 101 247.500E-03 |
| Sec. 9.3.2.2(ii) 0.003 202 185.625E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 190 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.119 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -110.974E-06 T FY: 148.933E-03 FZ: 5.116E-03 |
| MX: 20.667E-03 MY: -2.461E-03 MZ: -116.561E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 1.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 47.41 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 190 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 110.974E-06 LC: 101 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 110.974E-06 LC: 101 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 610.422E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 5.116E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -320.108E-03 LC: 106 Loc: 1.000 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -151.733E-03 LC: 106 Loc: 0.250 |
| Capacity: 51.563E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 2.655E-03 LC: 101 Loc: 1.000 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.000 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.333 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 1.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 1.000E+00 |
| Bend Major 0.003 106 250.000E-03 |
| Bend Minor 0.000 101 1.000E+00 |
| Sec. 9.3.1.1 0.000 101 1.000E+00 |
| Sec. 9.3.2.1 (Z) 0.003 101 333.333E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 1.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 191 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -18.220E-03 T FY: 37.656E-03 FZ: 574.218E-06 |
| MX: -1.826E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 191 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 18.220E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 18.220E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 574.218E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 110.487E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -48.796E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 426.357E-06 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.743 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 202 Loc: 0.433 |
| Equation 2(Y): Ratio: 0.000 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.743 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 0.000E+00 |
| Bend Major 0.011 106 742.500E-03 |
| Bend Minor 0.000 101 742.500E-03 |
| Sec. 9.3.1.3 0.011 106 742.500E-03 |
| Sec. 9.3.2.1 (Z) 0.002 202 433.125E-03 |
| Sec. 9.3.2.1 (Y) 0.000 101 742.500E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 192 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.425 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 12.041E+00 C FY: -15.714E+00 FZ: -8.964E-03 |
| MX: 337.308E-09 MY: 4.888E-03 MZ: -147.893E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.000E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.000E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 192 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 12.041E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 12.041E+00 LC: 101 Loc: 0.000 |
| Capacity: 1.967E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -8.964E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -16.937E+00 LC: 101 Loc: 1.000 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.000E+00 General |
| Major Axis: Design Force: -147.893E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: 4.888E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.176 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.425 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 0.000 KLT: 0.9997 |
| Equation 2: Ratio: 0.385 As per: Sec. 9.3.2.2 Ky : 1.0010 |
| LC: 101 Loc: 0.000 Kz : 1.0037 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.007 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.031 101 1.000E+00 |
| Bend Major 0.419 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.176 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.425 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.385 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 193 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.157 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Tension) |
| Critical Design Forces: (Unit: KN METE) |
| FX: -14.573E-03 T FY: 54.524E-03 FZ: 4.335E-03 |
| MX: -2.200E-03 MY: -3.219E-03 MZ: 7.243E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 400.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 193 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 14.573E-03 LC: 101 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 14.573E-03 LC: 101 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 0.000E+00 LC: 0 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 4.335E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -109.681E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -48.198E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -3.219E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.011 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Tension): |
| Equation 1(Z): Ratio: 0.002 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
| Equation 2(Y): Ratio: 0.003 As per: Sec. 9.3.2.1 |
| LC: 101 Loc: 0.000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 101 0.000E+00 |
| Compression 0.000 0 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.002 106 742.500E-03 |
| Bend Major 0.011 106 0.000E+00 |
| Bend Minor 0.003 101 0.000E+00 |
| Sec. 9.3.1.3 0.011 106 0.000E+00 |
| Sec. 9.3.2.1 (Z) 0.002 101 0.000E+00 |
| Sec. 9.3.2.1 (Y) 0.003 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 194 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.218 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 692.317E-06 C FY: -335.042E-03 FZ: -11.524E-03 |
| MX: 20.667E-03 MY: 2.655E-03 MZ: -57.392E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 30.800E+00 IZZ: 2.115E+03 RZZ: 8.287E+00|
| AYY: 11.400E+00 IYY: 137.000E+00 RYY: 2.109E+00|
| AZZ: 20.000E+00 IXX: 10.600E+00 CW: 15.042E+03|
| ZEZ: 211.500E+00 ZPZ: 240.000E+00 |
| ZEY: 27.400E+00 ZPY: 46.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 1.150E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 54.53 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 194 |
| Member Section: ST ISMB200 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 700.000E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 827.904E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 692.317E-06 LC: 101 Loc: 0.000 |
| Capacity: 700.000E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 692.317E-06 LC: 101 Loc: 0.000 |
| Capacity: 583.785E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: -11.524E-03 LC: 101 Loc: 0.000 |
| Capacity: 262.432E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -919.930E-03 LC: 106 Loc: 1.150 |
| Capacity: 149.586E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: 762.892E-03 LC: 106 Loc: 1.150 |
| Capacity: 50.686E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -10.598E-03 LC: 101 Loc: 1.150 |
| Capacity: 10.455E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.001 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 1.150 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.013 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 KLT: 1.0000 |
| Equation 2: Ratio: 0.011 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 1.150 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.006 106 1.150E+00 |
| Bend Major 0.015 106 1.150E+00 |
| Bend Minor 0.001 101 1.150E+00 |
| Sec. 9.3.1.1 0.001 101 1.150E+00 |
| Sec. 9.3.2.2 (i) 0.013 101 1.150E+00 |
| Sec. 9.3.2.2(ii) 0.011 101 1.150E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 195 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 16.640E-03 C FY: 75.833E-03 FZ: 803.291E-06 |
| MX: -4.031E-03 MY: 0.000E+00 MZ: 0.000E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 4.776E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 195 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 16.640E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 16.640E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 803.291E-06 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: 130.458E-03 LC: 106 Loc: 0.000 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -63.625E-03 LC: 106 Loc: 0.743 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: 596.444E-06 LC: 101 Loc: 0.743 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.014 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.743 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.681 KLT: 1.0000 |
| Equation 2: Ratio: 0.005 As per: Sec. 9.3.2.2 Ky : 1.0001 |
| LC: 101 Loc: 0.619 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 0.000E+00 |
| Bend Major 0.014 106 742.500E-03 |
| Bend Minor 0.001 101 742.500E-03 |
| Sec. 9.3.1.3 0.014 106 742.500E-03 |
| Sec. 9.3.2.2 (i) 0.006 101 680.625E-03 |
| Sec. 9.3.2.2(ii) 0.005 101 618.750E-03 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 196 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.379 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Sec. 9.3.2.2 |
| Critical Design Forces: (Unit: KN METE) |
| FX: 12.037E+00 C FY: -17.010E+00 FZ: 3.617E-03 |
| MX: 337.308E-09 MY: -4.076E-03 MZ: -131.571E+00 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 92.300E+00 IZZ: 30.391E+03 RZZ: 18.146E+00|
| AYY: 42.300E+00 IYY: 834.000E+00 RYY: 3.006E+00|
| AZZ: 52.200E+00 IXX: 79.900E+00 CW: 457.915E+03|
| ZEZ: 1.351E+03 ZPZ: 1.553E+03 |
| ZEY: 111.200E+00 ZPY: 187.000E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 1.150E+00 |
| Parameters: LZ: 12.000E+00 LY: 1.150E+00 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 66.13 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Plastic; Flange Class: Plastic; Web Class: Plastic|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 196 |
| Member Section: ST ISMB450 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.098E+03 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 2.481E+03 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: a Minor: b As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 21.037E+00 LC: 101 Loc: 0.479 |
| Capacity: 1.742E+03 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 21.037E+00 LC: 101 Loc: 0.479 |
| Capacity: 1.921E+03 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.617E-03 LC: 101 Loc: 0.000 |
| Capacity: 684.947E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -30.417E+00 LC: 101 Loc: 1.150 |
| Capacity: 555.044E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 1.150E+00 General |
| Major Axis: Design Force: -131.571E+00 LC: 101 Loc: 0.000 |
| Capacity: 352.955E+00 As per: Sec. 8.2.1.2 |
| Minor Axis: Design Force: -4.076E-03 LC: 101 Loc: 0.000 |
| Capacity: 42.500E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.139 As per: Sec. 9.3.1.1 |
| LC: 101 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.379 As per: Sec. 9.3.2.2 Ky : 1.0014 |
| LC: 101 Loc: 0.000 KLT: 0.9997 |
| Equation 2: Ratio: 0.344 As per: Sec. 9.3.2.2 Ky : 1.0014 |
| LC: 101 Loc: 0.000 Kz : 1.0037 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.012 101 479.167E-03 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.055 101 1.150E+00 |
| Bend Major 0.373 101 0.000E+00 |
| Bend Minor 0.000 101 0.000E+00 |
| Sec. 9.3.1.1 0.139 101 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.379 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.344 101 0.000E+00 |
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 197 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
| Status: PASS Ratio: 0.250 Critical Load Case: 101 Location: 0.00 |
| Critical Condition: Slenderness (Compression) |
| Critical Design Forces: (Unit: KN METE) |
| FX: 12.581E-03 C FY: 16.247E-03 FZ: 3.542E-03 |
| MX: -3.690E-03 MY: -2.630E-03 MZ: -21.177E-03 |
|----------------------------------------------------------------------------------|
| Section Properties: (Unit: CM ) |
| AXX: 9.100E+00 IZZ: 78.000E+00 RZZ: 2.928E+00|
| AYY: 3.600E+00 IYY: 12.800E+00 RYY: 1.186E+00|
| AZZ: 6.000E+00 IXX: 1.570E+00 CW: 112.179E+00|
| ZEZ: 20.800E+00 ZPZ: 25.100E+00 |
| ZEY: 9.697E+00 ZPY: 9.020E+00 |
|----------------------------------------------------------------------------------|
| Slenderness Check: (Unit: KN METE) |
| Actual Length: 742.500E-03 |
| Parameters: LZ: 1.485E+00 LY: 742.500E-03 |
| KZ: 1.000 KY: 1.000 |
| Actual Ratio: 62.61 Allowable Ratio: 250.00 LOAD: 101 |
|----------------------------------------------------------------------------------|
| Section Class: Semi-Compact; Flange Class: Plastic; Web Class: Semi-Compact|
|----------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------|
| Member Number: 197 |
| Member Section: ST ISMC75 (INDIAN SECTIONS) |
|----------------------------------------------------------------------------------|
| Tension: (Unit: KN METE) |
| Parameters: FYLD: 250.000E+03 FU: 420.000E+03 |
| NSF: 1.000 ALPHA: 0.800 |
| Yielding : Design Force: 0.000E+00 LC: 0 |
| Capacity: 206.818E+00 As per: Sec. 6.2 |
| Rupture : Design Force: 0.000E+00 LC: 0 |
| Capacity: 244.608E+00 As per: Sec. 6.3 |
|----------------------------------------------------------------------------------|
| Compression: (Unit: KN METE) |
| Buckling Class: Major: c Minor: c As per:Cl. 7.1.2.2 |
| Major Axis: Design Force: 12.581E-03 LC: 101 Loc: 0.000 |
| Capacity: 166.822E+00 As per: Sec. 7.1.2 |
| Minor Axis: Design Force: 12.581E-03 LC: 101 Loc: 0.000 |
| Capacity: 150.402E+00 As per: Sec. 7.1.2 |
|----------------------------------------------------------------------------------|
| Shear: (Unit: KN ) |
| Major Axis: Design Force: 3.542E-03 LC: 101 Loc: 0.000 |
| Capacity: 78.730E+00 As per: Sec. 8.4 |
| Minor Axis: Design Force: -129.643E-03 LC: 106 Loc: 0.743 |
| Capacity: 47.238E+00 As per: Sec. 8.4 |
|----------------------------------------------------------------------------------|
| Bending: (Unit: KN METE) |
| Parameters: Laterally Unsupported KX: 1.00 LX: 742.500E-03 General |
| Major Axis: Design Force: -63.019E-03 LC: 106 Loc: 0.000 |
| Capacity: 4.463E+00 As per: Sec. 8.2.2 |
| Minor Axis: Design Force: -2.630E-03 LC: 101 Loc: 0.000 |
| Capacity: 1.085E+00 As per: Sec. 8.2.1.2 |
|----------------------------------------------------------------------------------|
| Combined Interaction: |
| Parameters: PSI: 1.00 CMX: 0.900 CMY: 0.900 CMZ: 0.900 |
| Section Strength: Ratio: 0.014 As per: Sec. 9.3.1.3 |
| LC: 106 Loc: 0.000 |
| Overall Member Strength (Bending+Compression): |
| Equation 1: Ratio: 0.007 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.000 KLT: 1.0000 |
| Equation 2: Ratio: 0.006 As per: Sec. 9.3.2.2 Ky : 1.0000 |
| LC: 101 Loc: 0.062 Kz : 1.0000 |
|----------------------------------------------------------------------------------|
| Checks Ratio Load Case No. Location from Start( METE) |
| |
| Tension 0.000 0 0.000E+00 |
| Compression 0.000 101 0.000E+00 |
| Shear Major 0.000 101 0.000E+00 |
| Shear Minor 0.003 106 742.500E-03 |
| Bend Major 0.014 106 0.000E+00 |
| Bend Minor 0.002 101 0.000E+00 |
| Sec. 9.3.1.3 0.014 106 0.000E+00 |
| Sec. 9.3.2.2 (i) 0.007 101 0.000E+00 |
| Sec. 9.3.2.2(ii) 0.006 101 61.875E-03 |
|----------------------------------------------------------------------------------|
STEEL TAKE-OFF
--------------
209. FINISH
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************