Professional Documents
Culture Documents
Each chapter will include a few questions designed to test your knowledge of
material covered in the chapter and in the Internet-based resources. Your answers
are not being recorded. Try the following.
Which of the following describes the build up and release of stress during an
earthquake?
the Modified Mercalli Scale
the elastic rebound theory
the principle of superposition
the travel time difference
The amount of ground displacement in a earthquake is called the _________ .
epicenter
dip
slip
focus
The point where movement occurred which triggered the earthquake is the _______ .
dip
epicenter
focus
strike
Which of the following sequences correctly lists the different arrivals from first
to last?
P waves ... S waves .... Surface waves
Surface waves ... P waves .... S waves
P waves ... Surface waves ... S waves
S waves ... P waves .... Surface waves
How do rock particles move during the passage of a P wave through the rock?
back and forth parallel to the direction of wave travel
back and forth perpendicular to the direction of wave travel
in a rolling circular motion
the particles do not move
Detailed studies of what earthquake allowed researchers to develop the elastic
rebound theory?.
the 1906 San Francisco earthquake
the 1964 Anchorage, Alaska earthquake
the 1755 Lisbon, Portugal earthquake
the 1985 Mexico CIty earthquake
How many seismograph stations are needed to locate the epicenter of an earthquake?
1
2
3
4
Earthquakes can occur with _________ faulting.
normal
reverse
thrust
all of these
Approximately what percentage of earthquakes occur at plate boundaries?
25%
50%
75%
90%
Which type of faulting would be least likely to occur along the mid-Atlantic ridge?
normal
reverse
transform
all of these could occur
How often do magnitude 8 earthquakes occur?
about 5 to 10 times per year
about once a year
about every 5 to 10 years
about every 50 to 100 years
The bulk modulus measures ______________.
the resistance to flow of a liquid
the resistance to change in color
the resistance to change in volume
the resistance to change in shape
The shear modulus measures _____________ .
the resistance to flow of a liquid
the resistance to change in shape
the resistance to change in volume of a liquid
the resistance to change in volume of a solid
If only density increases with increasing depth within the Earth, the velocity of a
P wave should ___________ .
stay the same
increase
decrease
If a P wave were to go from a solid to a liquid - what would happen to its
velocity?
stay the same
increase
decrease to 0.0
decrease
If an S wave were to go from a solid to a liquid - what would happen to its
velocity?
stay the same
increase
decrease to 0.0
decrease
Which boundary marks a change from 100% solid to 100% liquid?
mantle ... outer core
lithosphere ... asthenosphere
crust ... mantle
none of these
Body waves consist of the:
P waves only
S waves only
P and S waves
Surface waves
With increasing travel time the difference in arrival times between the P and the S
waves _________
increases
decreases
stays constant
none of the above
Earthquake A has a Richter magnitude of 7 as compared with earthquake B's 6. The
amount of ground motion is one measure of earthquake intensity.
A is 10X more intense than B
A is 1000 more intense than B
Richter magnitude does not measure intensity
B is 0.01X as intense than A
In general, the most destructive earthquake waves are the __________ .
P waves
S waves
Surface waves
Q waves
Where is the focus with respect to the epicenter:
directly below the epicenter
directly above the epicenter
in the P wave shadow zone
in the S wave shadow zone
Point A, where slip initiated during the earthquake, is called the ________.
dip
epicenter
focus
scarp
Point B is called the earthquake ________.
dip
epicenter
focus
scarp
Point C is called the _________
epicenter
fault scarp
seismic wave
dip of the earthquake
What type of faulting is illustrated in this diagram?
normal
reverse
thrust
abnormal