You are on page 1of 11

©2018 Inkugurumi. Ingrid van Donkelaar –all rights reserved.. For personal use only.

Selling or distributing this


pattern is prohibited. For questions or comments please email: ingrid@inkugurumi.nl Names and trademarks
are property of ©Disney
Materials;
-Crochethook 2,5 or 3mm/ C or D
-50 gram Dark brown cotton
-25 gram Medium brown cotton
-20 gram Deep brown cotton
-15 gram Light brown cotton
-50 gram Skintone cotton
-25 gram White cotton
-30 gram Red cotton
-25 gram Deep blue cotton
-Left over Light grey cotton
-Safety eyes 18mm
-Red and yellow beads
-Stuffing
-Tapestry needle

Abbreviations;

ch = chain
tch = turning chain
slst= slipstitch
sk = skip
mr = magic ring
sc = single crochet
scbl = single crochet through back loop
hdc = half double crochet
pst3 = popcornstitch 3dc
sc2tog = sc 2 sc together
hdc2tog = half double cochet 2 together
HEAD.
Use the skin colored yarn.

1. mr 6sc. (6sc.)
2. 2sc in 1sc. Repeat (12sc.)
3. 1sc, 2sc in 1sc. repeat (18sc.)
4. 2sc, 2sc in 1sc. repeat (24sc.)
5. 3sc, 2sc in 1sc. repeat (30sc.)
6. 4sc 2sc in 1sc. repeat (36sc.)
7. 5sc, 2sc in 1sc. repeat (42sc.)
8. 6sc, 2sc in 1sc. repeat (48sc.)
9. 7sc, 2sc in 1sc. repeat (54sc)
10. 8sc 2sc in 1sc. repeat (60sc)
11. 9sc, 2sc in 1sc. repeat (66sc.)
12. 10sc,2sc in 1sc. repeat (72sc.)
13. 72sc in front loops only.
14-25. 72sc. (12 rounds)
26. 10sc, sc2tog, repeat (66sc)
27. 9sc, sc2tog, repeat (60v.)
28. 8sc, sc2tog, repeat (54v.)
Finish off
Place the safety eyes between round 17 and 18 with a 11sc gap

Bottom of the head.

1. mr 6sc. (6sc.)
2. 2sc in 1sc. Repeat (12sc.)
3. 1sc, 2sc in 1sc. repeat (18sc.)
4. 2sc, 2sc in 1sc. repeat (24sc.)
5. 3sc, 2sc in 1sc. repeat (30sc.)
6. 4sc 2sc in 1sc. repeat (36sc.)
7. 5sc, 2sc in 1sc. repeat (42sc.)
8. 6sc, 2sc in 1sc. repeat (48sc.)
9. 7sc, 2sc in 1sc. repeat (54sc)
Don't finish off but crochet the 2 parts together using slst, stuff the head as you go.
HAIR.
The hair is placed on top of the head as a wig.
Use the Dark Brown yarn.

1. mr 6sc. (6sc.)
2. 2sc in 1sc. Repeat (12sc.)
3. 1sc, 2sc in 1sc. repeat (18sc.)
4. 2sc, 2sc in 1sc. repeat (24sc.)
5. 3sc, 2sc in 1sc. repeat (30sc.)
6. 4sc 2sc in 1sc. repeat (36sc.)
7. 5sc, 2sc in 1sc. repeat (42sc.)
8. 6sc, 2sc in 1sc. repeat (48sc.)
9. 7sc, 2sc in 1sc. repeat (54sc)
10. 8sc 2sc in 1sc. repeat (60sc)
11. 9sc, 2sc in 1sc. repeat (66sc.)
12. 10sc,2sc in 1sc. repeat (72sc.)
13. 72sc in front loops only.
14-22. 72sc. (9 rounds.)
Finish off.
Now we are going to create the hair. This is done in 2 steps.
Please read all steps before starting.
Start by pre cutting strings of yarn, approx 30cm long.

Staep 1; We are going to secure the yarn strands in place, 2 strands at a time. Insert your hook and
pull up a loop, now pull through all 4 strands of yarn and gently pull tight to create a knot. First we
are going to create a parting. We start on round 15 in the front and end on round 15 on the back of
the head. We are going to be placing strands of hair on both sides of the parting (For this step i cut
48 strands of yarn)

Stap 2; Now we are going to fill in the gaps in the center of the parting and underneath the first row
of hair, do this until there are no more visible gaps.
BANDANA.
Use the red yarn.
1. chain 2, turn.
2. 1sc in 2nd chain from hook, 1tc. (1sc.)
3. 2sc in 1sc, 1tch. (2sc.)
4. 1sc, 2sc in 1sc, 1tch. (3sc.)
5. 3vsc 1tc.h (3sc.)
6. 2sc in 1sc, 2sc, 1tch. (4sc.)
7. 4sc, 1tch. (4sc.)
8. 3sc, 2sc in 1sc, 1tch. (5sc.)
9-13. 5sc, 1tch. (5 rounds)
14. 5hdc, 1tch (5hdc.)
15. 2hdc in 1hdc, 4hdc, tch. (6hdc.)
16-18. 6hdc, 1tc. (3 rounds)
19. 2hdc in 1hdc, 1tch. (7hdc.)
20-21. 7hdc, 1tch. (2 rounds)
22. 2hdc in 1hdc, 6hdc, 1tch (8hdc.)
23-25. 8hdc, 1tch. (3 rounds)
26. 2hdc in 1hdc, 7hdc, 1kl (9hsdc.)
27-31. 9hdc, 1tch. (5 rounds)
32. hdc2tog, 7hdc, 1tch. (8hdc.)
33-35. 8hdc, 1tch. (3 rounds)
36. hdc2tog, 6hdc, 1tch. (7hdc.)
37-38. 7hdc, 1tch (2 rounds)
39. hdc2tog, 5hdc, 1tch. (6hdc.)
40-42. 6hdc, 1tch. (3 rounds)
43. hdc2tog, 4hdc, 1tch. (5hdc.)
44. 5hdc, 1tch.
45-49. 5sc, 1tch.(5 rounds)
50. 3sc, sc2tog, 1tch (4sc.)
51. 4sc, 1tch.
52. sc2tog, 2sc, 1tch. (3sc.)
53. 3sc.
54. 1sc, sc2tog, 1tch. (2sc.)
55. 2sc, 1tch.
56. sc2tog.
Don't finish of but crochet around the bandana with sc.
1. Place the bandana over his forehead and leave out 2 pieces of hair on the left side of his face (see
first pic)
2. Twist some red yarn around the back piece of hair creating a small ponytail.
3. For the front piece we are going to string some beads. (see pic 2) Make a little knot on the
bottom of the beads and cut off the excess yarn.
4. Use 6 strings of yarn, left from the left eye, to make a braid.
5. Take a string on the right side of the face and string some beads. Make a little knot on the bottom
of the beads and cut off the excess yarn.

LEGS 2x
Start with light brown yarn
1. mr 6.
2. 2sc in 1 sc. repeat (12sc.)
3. 1sc, 2sc in 1sc. (18sc.)
4. 2sc, 2sc in 1sc. (24sc.)
5. 24sc through back loops only.
6-11. 24sc.
Switch to medium brown yarn
12. 24sc through back loops only.
13-20. 24sc (8 rounds)
Now sc the legs together with 3sc and 1slst.

attach with light brown on round 12


chain 2, 1dc in every loop around the leg, 1slst in the 2nd chain.
BODY.
Switch to medium brown (attach the yarn on stitchmarker seen on picture above)

1. 44sc around the legs


2. 44sc.
3. 44sc.
Switch to skin coloured yarn.
4. 10scblo, sc2tog, 20scblo, sc2tog, 10scblo. (42scblo)
5-9. 42sc. (5 rounds)
10. (8sc, sc2tog.) x4, 2sc (38sc.)
11. sc2tog, 8sc, repeat. (36sc.)

Top of the body


Use the skin coloured yarn.
1. mr 6sc. (6sc.)
2. 2sc in 1sc. Repeat (12sc.)
3. 1sc, 2sc in 1sc. repeat (18sc.)
4. 2sc, 2sc in 1sc. repeat (24sc.)
5. 3sc, 2sc in 1sc. repeat (30sc.)
6. 4sc 2sc in 1sc. repeat (36sc.)
sc the two parts together by sc through all off the loops. Don't forget to stuff the rest of the body
before you close it.

BLOUSE..
Use the white yarn
1. chain 48, 1sc in first chain.
2. 48sc.
See if the chain fits around the body (see pic above). Change the length of the chain if needed
3. 48sc.
4. sc2tog, 46sc. (47sc.)
5. sc2tog, 45sc. (46sc.)
6. sc2tog, 44sc. (45sc.)
Put a stitchmarker in the 23rd sc.
7. sc till the 23rd sc. turn your work (no tch.) sc all the way back to the beginning, turn(no tch.)
8. 22sc, sc2tog, 21sc, turn, no tch. (44sc.)
9. 21sc, sc2tog, 11sc, turn, no tch. (43sc.)
10. 20sc, sc2tog, 19sc, sc2tog. turn, no tch. (41sc.)
11. 19sc, sc2tog, 18sc, sc2tog. turn, no tch. (39sc.)
Turn the work so the front of the blouse is facing you,
12. 6 sc through front loop, no tch.
13. 1sc, 1sc, 1hdc, 1hdc,1dc,1dc
Don't finish off, slip stitch along the entire v-neck
14. 6sc through backloop.
15. 1sc, 1sc, 1hdc, 1hdc, 1dc, 1dc, 2slst along the last dc. Finish off.

ARMS 2x.
Use the skin coloured yarn.
1. mr 6.
2. 1sc, 2sc in 1sc. repeat (9sc.)
3. 9sc
4. 9sc
5. 2sc, 1pst3 6sc.
Change to white
6. 9sc.
7. 9scblo
8-15. 9sc.
16. Crochet until you reach the side of the arm. Stuff the arm, now fold the arms together, make
sure the thumb is pointing outwards.
Now close the top of the arm with 3sc and 1slst.
17. Attach on round 7, above the thumb. Chain 2, dc around the arm, 1 hdc in last loop, attach with
one sl st in the 2nd chain.
Don't attach the arms to the body yet.
WAISTCOAT.
Use the blue yarn.
It's important to keep measuring the waistcoat.
1. chain 46. 45sc starting 2nd chain from the hook, 1tch.
2. skip 1, 44sc, 1tch.
3-5 44sc, 1tch. (3 rounds)
6. 21sc, sc2tog, 21sc, 1tch (43sc.)
7. 43sc, 1tch.
8. 20sc, sc2tog, 21sc, 1tch (42sc.)
9. 42sc, 1tch.
10. 42sc, 1tch.
11. 7sc, chain 6, skip 5sc, 18sc, chain 6, 7sc, 1tch.
12. 43sc. (= 6sc, 6sc in chainspace, 18sc, 6sc in chainspace, 7sc.)
Don't finish off but slst around the waistcoast, 2slst in the corners.

Put the waistcoat on and attach the borders of the blouse on the waistcoat with needle and thread.
Attach the arms on the blouse.

BELTS.
Use the dark brown yarn.

1. chain 55, close ring with a slst.


2-3. 55sc don't finish off.
4. chain 44, 1slst in 1st chain.
5. 12sc, chain 3, slst in 2nd and 1st chain. slst in 12th sc, 32sc. Finish off.
Switch to light grey and with needle and tread, twist around the belts to create buckles, as shown
on the pictures below.
Attaching the head
Allign the MR from the head with the MR from the top of the body and use the back loops of the
top of the body to secure the head in place with needle and thread.
www.inkugurumi.nl

www.facebook.com/inkugurumi

www.instagram.com/inkugurumi

©2018 Inkugurumi. Ingrid van Donkelaar –all rights reserved.. For personal use only. Selling or distributing this
pattern is prohibited. For questions or comments please email: ingrid@inkugurumi.nl Names and trademarks
are property of ©Disney

You might also like