Professional Documents
Culture Documents
NETWORK ADMINISTRATION
PRACTICAL TASK 3
CLASS CRYSTAL
SESSION 3 2022/2023
QUESTION 1
ii. Assign all the network cables correct switch ports based on diagram below.
iii. Change hostname for both routers based on the diagram to R1 and R2
respectively.
R1 :
R2:
iv. Set IP address for all router interfaces. Then, perform static routing configuration
on both router R1 and R2.
R1
R2
v. Perform clock rate configuration on one of router interface that connected to Serial
interface. Set the clock rate to 128,000.
vi. Assign static IP address for all PCs.
QUESTION 2
i. Using Cisco Packet tracer software, recreate the diagram above. Configure all router
interface based on given Network Address and Subnet Mask, and change router
hostname R1 and R2 respectively.
Diagram :
Set the hostname of R1 & R2
iv. After completion, test the network connection by using suitable network
troubleshooting command given below:
i. Ipconfig
ii. Ping
PC 1-1 – PC 2-1
PC1-2 – PC2-2
PC 1-3 – PC2-3
iii. Show Ip Route
R1 & R2