Professional Documents
Culture Documents
4x10m mill
1. Calculation of heat generated by bearings
The friction damage of the bearing is almost completely transformed into heat inside the
bearing, resulting in an increase in bearing temperature. The calculation formula for the heat
generation of the bearing is as follows:
Q1=1.05x10^(-4)*M*n
Q1--- Heat generated (kW)
M--- friction torque (N.mm);M=0.5*u*P*d
n--- Rotation speed of bearings (r/min)
u--- Friction coefficient of bearings
P--- Load on bearings (N)
Bearing type: self-aligning roller bearing, feed bearing model: NNU1000Y3, discharge
bearing model: NNUP1000Y3
Bearing bearing load: P=70t (input end bearing load of 68t, output end bearing load of 70t,
calculated based on larger load)
Bearing friction coefficient:u=0.002~0.0025
Bearing nominal inner diameter:d=1000mm
Bearing rotation speed:n=21.6r/min
friction torque:M=0.5*u*P*d=0.5*0.0025*70*1000*9.81=858.375N.mm
Heat generation of bearings:Q1=1.05x10^(-4)*M*n=1.05x10^(-4)*858.375*21.6=1.947kw