Professional Documents
Culture Documents
Wireless commercial
zoning system
A cost-effective, scalabe zoning system for the commercial
market that delivers unparalleled flexibility via the ZigBee®
communication protocol.
Wireless commercial zoning system 02
Typical application
Fresh air
Roof top unit measurement station
Control
board
Actuator Return
Supply air
air
Damper control
(All zones)
PI modulating Wireless ZigBee
0 - 10 VDC actuator communication
CO2
sensor
Static pressure sensor SEZ7656E5045W
SEZ7260F5045W
Optional
supervisory system
Reheat control PI time
proportioning or
0 - 10 VDC hydronic
or electric reheat
CO2
sensor
SEZ7260F5045W
SEZ7260F5545W
with PIR motion sensor Up to
100 zones
Wireless commercial zoning system 04
Getting you closer to LEED certification measurement and control. It also offers embedded
free cooling economiser control, ensuring that
By installing the Schneider Electric zoning system in cooling energy efficiency is optimised.
your building, energy required to render the space
comfortable will be used more efficiently when When used with central scheduling functions, the
compared to buildings using conventional control optional PIR motion sensor with occupancy logic
systems. Operating costs will be reduced and an based on actual occupancy detection can also
overall healthier work and living environment will help attain HVAC energy-efficiency LEED credits.
be achieved.
The Schneider Electric zoning system allows
With LEED certification becoming more prevalent building owners to maintain a healthy environment
in today’s new and existing commercial buildings, for their occupants as well as maximise the overall
the Schneider Electric wireless zoning system environmental and economic performance of
now offers the added advantage of bringing your their buildings.
building one step closer to attaining the credits
For more information on this and other
required for LEED certification. Schneider Electric control solutions, please
visit Schneider Electric on the web at:
The Schneider Electric wireless zoning system http://schneider-electric.com/buildings
can help in attaining indoor environmental quality
credits when used in conjunction with CO2 sensors
and a fresh air measurement device. The IAQ
controller can monitor indoor air quality, provide
C02 demand-based ventilation, and fresh air
Features Benefits
Can be used in small to large size systems; a maximum of 100 zones can be
Best in class system scalability
installed for each central unit controller
Delivers the same performance as a full BMS without the higher cost associated
Provides DDC type control functionality and accuracy
with it
No external software tools required for installation, Faster learning curve for first time installers; provides quick, simple installation;
commissioning, or servicing with embedded local HMI utility no previous experience required
Uses ZigBee communication protocol No network wires are required for system communication
Can be integrated with various types of systems, including typical RTU with
Full line of models offer solutions for a wide range of applications
various extra required functions, as well as heat pump units
Can control IAQ with any typical third-party wall-mounted
Control of IAQ means healthier and more productive occupants
C02 sensor
Controls and measures fresh air with any third-party fresh air
Meets new IAQ requirements and can assists in achieving LEED credits
measurement station
Provides true energy savings with adjustable economiser control loop; minimum
Provides embedded free cooling economiser loop
fresh air can be measured and controlled with fresh air measurement station
Allows for future network functionality along with remote monitoring of all critical
Built-in network-ready functionality
system data points for sustainability
Passive infrared (PIR) sensor cover available as either an Further energy savings is possible with the use of a local PIR cover to
accessory or factory mounted option automatically detect local occupancy
Wireless commercial zoning system 05
SEZ7260 45
PIR options:
-50 = PIR ready, but PIR cover not included
-55 = Factory assembled with PIR cover
Example:
SEZ7260F5545B Control output type: Communication options:
• Zoning system controller -C = Floating or on/off digital control outputs -B = BACnet MS/TP
• Analogue outputs -F = Analogue 0 - 10 VDC control outputs -W = ZigBee wireless
• Factory assembled PIR cover
• BACnet MS/TP communication * Some part number configurations may not be available.
Please refer to the tables for available versions.
SEZ7656 1045
Example: Communication options: Communication options:
-E = 2H/2C IAQ applications -B = BACnet MS/TP
SEZ7656E1045W
-F = 1H/2C modulating heat applications -W = ZigBee wireless
• Zoning system controller
-H = 3H/2C heat pump applications
• 2H/2C IAQ application
-R = 2H/2C roof top aplications
• PIR ready
• ZigBee wireless communication * Some part number configurations may not be available.
Please refer to the tables for available versions.
Please refer to the SE7000 Series - Product Comparison Guide for all available part numbers. The latest SE7000 Series - Product Comparison Guide
is available as a pdf document on the Buildings Business Extranet: http://schneider-electric.com/buildings.
©2013 Schneider Electric. All rights reserved.
Schneider Electric One High Street North Andover, MA 01845 Telephone: 1 (800) 225-0962 www.schneider-electric.com/buildings