This document describes an oscilloscope test of two channels, CH1 and CH2. CH1 is set to 10V and 50Hz, while CH2 is also set to 10V. The oscilloscope is triggered and displaying both channels over a 5ms time period with the trigger occurring at 0 seconds.
This document describes an oscilloscope test of two channels, CH1 and CH2. CH1 is set to 10V and 50Hz, while CH2 is also set to 10V. The oscilloscope is triggered and displaying both channels over a 5ms time period with the trigger occurring at 0 seconds.
This document describes an oscilloscope test of two channels, CH1 and CH2. CH1 is set to 10V and 50Hz, while CH2 is also set to 10V. The oscilloscope is triggered and displaying both channels over a 5ms time period with the trigger occurring at 0 seconds.