Professional Documents
Culture Documents
www.lincolnelectric.com
About The Lincolnx
Electric Companyx
Lincoln’s Innershield® Wires
Lincoln Electric is the world’s leading Lincoln Electric is the Worldwide Leader in
Self-Shielded Flux-Cored (FCAW-S) Wire
manufacturer of welding equipment and A half century ago, Lincoln Electric changed the welding industry by
consumables. Our focus is on helping introducing the first self-shielded flux-cored wire. Vast improvements in
welding efficiency and quality were achieved, and Innershield® quickly
companies make their welding earned a reputation as an efficient alternative to stick welding.
operations more effective, more
Today, almost 50 years of Innershield® design and manufacturing
efficient, more profitable. We are
experience give every pound of Innershield® wire industry leading
dedicated to two equally important quality and performance.
goals: exceptional quality and
When Fabricators Think of Self-Shielded Flux-Cored Wire –
exceptional service. Our field support They Think Innershield®
Lincoln Electric has developed a reputation among fabricators as the
team –– with hundreds of field sales
leader in self-shielded flux-cored wire design, manufacture, and
engineers and thousands of innovation. Many industries rely on Innershield® for their most crucial
applications, including: structural, transportation, offshore, and marine.
knowledgeable and responsive Lincoln
For the portability of stick electrode and the productivity of wire electrode
distributors in countries all over the – welding fabricators choose Lincoln’s Innershield® Flux-Cored Wire.
world –– is the largest in the industry.
Proprietary Manufacturing Process
Innovative thinking. A quality, service- Lincoln Electric created and developed proprietary equipment to perfect
first attitude. Fresh approaches to the manufacture of this innovative product. Lincoln’s superior inspection
process helps you improve your quality and efficiency.
design, manufacturing, and packaging.
Worldwide strength. Here’s how our manufacturing process gives you the most consistent,
high-quality wire:
Choose Lincoln. • Proprietary techniques for inspecting incoming raw steel ensure the
chemistry of each coil.
• Steel is graded according to chemical composition and matched to
the most appropriate finished product.
• Steel chemistries are held to extremely tight tolerances to ensure
consistency in mechanical properties and arc performance.
• Fluxes are inspected and monitored to ensure a consistent blend of
chemical elements.
• Moisture levels are monitored throughout processing, and lubricants
are carefully selected to provide the lowest moisture content.
Innershield ® Wire
2 www.lincolnelectric.com
Self Shielded, Flux-Cored Wires
Contents Page
Wire Selection
Guide . . . . . . . . . . . . . . . . . . . . 4-7
High Speed Single
ISO 9001 and 14001 Certified Pass Welding . . . . . . . . . . . . . 8-13
Lincoln Electric is ISO 9001 and 14001 certified
and Innershield® is manufactured to standards for All-Position
environmental and quality management systems. Welding with
The result is a wire of consistently superior quality No Impact Properties . . . . . . 14-17
– time after time. All-Position
Welding with
FEMA 353 and AWS D1.8 Impact Properties . . . . . . . . 18-25
Many Innershield® electrodes meet lot waiver requirements for
FEMA 353 and AWS D1.8 welding codes, including Innershield® Flat and Horizontal
NR-311 Ni, NR-305, NR-232 and NR-233. These electrodes have Welding with
been tested in accordance with both codes and are capable of Impact Properties . . . . . . . . 26-29
depositing weld metal that delivers minimum CVN properties of
Flat and Horizontal
54 J at 21°C (40 ft•lbf at 70°F) at low and high heat input levels.
Welding with
A minimum of three lots of each electrode have been tested in
No Impact Properties . . . . . . 30-33
accordance to these guidelines and meet the lot waiver
specifications in AWS D1.8. FEMA 353 and AWS D1.8 certificates Pipe Fabrication . . . . . . . . . . 34-37
are available upon request and accessible online through
www.lincolnelectric.com/d1.8. Packaging . . . . . . . . . . . . . . . . . 38
Agency Approvals . . . . . . . . . . . 39
AWS Storing FCAW-S
D 1.8
Structural Welding Code
Electrodes . . . . . . . . . . . . . . . . . 40
Lincoln Electric
Seismic Supplement
Sales Offices . . . . . . . . . . . . . . . 43
Innershield ® Wire
3 www.lincolnelectric.com
INNERSHIELD® WIRE SELECTION GUIDE
Diameter
Name AWS Classification in. (mm)
All Position
NR® -203MP E71T-8J 0.068 (1.7)
5/64 (2.0)
NR-203 Nickel (1%) E71T8-Ni1 5/64 (2.0)
NR-232 E71T-8 0.068 (1.7)
0.072 (1.8)
5/64 (2.0)
NR-233 E71T-8 1/16 (1.6)
0.072 (1.8)
5/64 (2.0)
Flat and Horizontal
NR-305 E70T-6 5/64 (2.0)
3/32 (2.4)
NR-311 Ni E70T-7-K2 5/64 (2.0)
3/32 (2.4)
7/64 (2.8)
AWS
HIGH DEPOSITION WITH NO LOW D 1.8
Structural Welding Code
TEMPERATURE IMPACT PROPERTIES Seismic Supplement
Diameter
Name AWS Classification in. (mm)
Flat and Horizontal
NR-311 E70T-7 5/64 (2.0) FEMA 353 AND AWS D1.8 COMPLIANT
3/32 (2.4)
Diameter
7/64 (2.8) Name AWS Classification in. (mm)
NS-3M E70T-4 5/64 (2.0) Flat and Horizontal
3/32 (2.4) NR-311-Ni E70T-7-K2 3/32 (2.4)
0.120 (2.8) NR-305 E70T-6 3/32 (2.4)
All Position
NR-232 E71T-8 0.068 (1.7)
SINGLE PASS ONLY WITH NO LOW 0.072 (1.8)
TEMPERATURE IMPACT PROPERTIES 5/64 (2.0)
Diameter NR-233 E71T-8 1/16 (1.6)
Name AWS Classification in. (mm) 0.072 (1.8)
Flat and Horizontal 5/64 (2.0)
NR-5 E70T-3 3/32 (2.4)
0.0120 (3.0)
NR-131 E70T-10 3/32 (2.4)
NR-152 E71T-14 0.062 (1.6) GENERAL FABRICATION WITH NO LOW
0.068 (1.7) TEMPERATURE IMPACT PROPERTIES
Diameter
Name AWS Classification in. (mm)
NR-211-MP E71T-11 0.030 (0.8)
0.035 (0.9)
PIPE FABRICATION
0.045 (1.1)
Diameter 0.068 (1.7)
Name AWS Classification in. (mm) 5/64 (2.0)
All Position 3/32 (2.4)
NR-207 E71T8-K6 0.068 (1.7) NR-212 E71TG-G 0.045 (1.1)
5/64 (2.0) 0.068 (1.7)
NR-208-H E91T8-G-H8 5/64 (2.0) 5/64 (2.0)
Innershield ® Wire
4 www.lincolnelectric.com
INNERSHIELD® WIRE SELECTION GUIDE
E71T-8 H16
Electrode
Hydrogen Level:
H8 = less than 8 mL/100 g
H16 = less than 16 mL/100 g
AWS Welding
Classification Position(1) Current Application(2)
(1) (2)
H = Horizontal position S = Single pass only
F = Flat position M = Single or Multiple pass
OH = Overhead position
VU = Vertical-Up position
VD = Vertical-Down position
Innershield ® Wire
5 www.lincolnelectric.com
INNERSHIELD® WIRE SELECTION GUIDE
Innershield® NR-5 E70T-3 Flat & Innershield® NR-5 is designed for high speed single pass 8-9
Horizontal welding applications. It is recommended for flat and
horizontal positions with maximum steel thickness up to
4.8 mm (3/16 in.). For high productivity welding on thin
gauge material – choose Innershield® NR-5.
Innershield® NR-131 E70T-10 Flat & Innershield® NR-131 is designed for high deposition rates 10-11
Horizontal at high speeds. It is recommended for single pass welding
on material thicknesses of 2.8 mm (0.110 in.) or greater. For
both single and twin arc welding applications and automatic
roundabout positions – choose Innershield® NR-131.
Innershield® NR-152 E71T-14 All Position Innershield® NR-152 is designed for high speed welding 12-13
of specialty coated steels. It is recommended for single
pass welding on material thicknesses from 0.8 to 4.8 mm
(0.030 to 3/16 in.). For excellent arc characteristics on
galvanized or other coated steels – choose
Innershield® NR-152.
Innershield® NR-211-MP E71T-11 All Position Innershield® NR-211-MP is a versatile wire suitable for 14-15
all-position welding of light gauge or thin plate. It is
recommended for maximum plate thicknesses in the range
of 7.9 mm (5/16 in.) to 12.7 mm (1/2 in.). For an easy to use
general fabrication wire – choose Innershield® NR-211-MP.
Innershield® NR-212 E71TG-G All Position Innershield® NR-212 is designed with the same arc 16-17
characteristics of NR-211-MP, but for use on a larger range
of applications. It is recommended for single or multiple
pass welding on up to 19 mm (3/4 in.) thicknesses. For
smooth arc performance on a wide variety of applications
– choose Innershield® NR-212.
Innershield® NR-203MP E71T-8J All Position Innershield® NR-203MP is designed to handle poor fit-up 18-19
on heavy wall tubes and gaps up to 9.5 mm (3/8 in.) with
6.4 mm (1/4 in.) offset. It is recommended for all position
welding on unlimited plate thicknesses. For a FCAW-S
electrode with impact properties capable of exceeding
27 J (20 ft•lbf) at -40°C (-40°F) and operability on materials
with poor fit-up – choose Innershield® NR-203MP.
Innershield® NR-203 E71T8-Ni1 All Position Innershield® NR-203 Nickel (1%) is designed to produce a 20-21
Nickel (1%) nickel bearing weld deposit with impact properties capable
of exceeding 27 J (20 ft•lbf) at -29°C (-20°F). It handles
poor fit-up in the vertical up position and welds gaps up to
9.5 mm (3/8 in.). For nickel bearing weld deposits and color
matching on weathering steels – choose Innershield®
NR-203 Nickel 1%.
Innershield® NR-232 E71T-8 All Position Innershield® NR-232 is designed for high deposition, 22-23
out-of-position welding for structural fabrication in seismic
AWS zones. It is recommended for single or multiple pass
D 1.8
Structural Welding Code welding of 4.8 mm (3/16 in.) and heavier carbon steel. For
Seismic Supplement
Innershield ® Wire
6 www.lincolnelectric.com
INNERSHIELD® WIRE SELECTION GUIDE
Innershield® NR-233 E71T-8 All Position Innershield® NR-233 is a good choice for training or 24-25
novice welders while also meeting the mechanical property
AWS requirements listed in AWS D1.8. It is recommended for
D 1.8
Structural Welding Code
Seismic Supplement vertical up and overhead fillet and groove welds. For easy
out-of-position operability and impact properties capable
of exceeding 27 J (20 ft•lbf) at -29°C (-20°F) – choose
Innershield® NR-233.
Innershield® NR-305 E70T-6 Flat & Innershield® NR-305 is designed for in-position, high 26-27
(1) (1) Horizontal deposition welding on carbon steel. It is recommended
AWS
D 1.8 in single or multiple pass, automatic and semiautomatic
Structural Welding Code
Seismic Supplement welding. For impact properties capable of exceeding
27 J (20 ft•lbf) at -29°C (-20°F) and excellent operator
appeal – choose Innershield® NR-305.
Innershield® NR-311 Ni E70T-7-K2 Flat & Innershield® NR-311 Ni is designed to provide a nominal 28-29
(1) (1) E80T-G-K2 Horizontal 1.5% nickel weld deposit with high deposition rates and
AWS
D 1.8 fast travel. It is recommended for flat and horizontal
Structural Welding Code
Seismic Supplement positions in single and multiple pass welding. For impact
properties capable of exceeding 27 J (20 ft•lbf) at -29°C
(-20°F) – choose Innershield® NR-311 Ni.
Innershield® NR-311 E70T-7 Flat & Innershield® NR-311 is designed for high deposition rates 30-31
Horizontal and fast travel speeds. It is recommended for fillet, lap and
butt welds on 3.2 mm (1/8 in.) and thicker steel, including
some low alloy steels in applications without impact
strength requirements. For high deposition rates, easy slag
removal and good bead shape – choose Innershield® NR-311.
Innershield® NS-3M E70T-4 Flat & Innershield® NS-3M is designed for very high deposition 32-33
Horizontal rates and increased resistance to hydrogen cracking and
porosity on steel containing sulfur or contaminates. It is
recommended for single or multiple pass welding on carbon
steel and some low alloy steels in applications without
impact strength requirements. For high deposition on less
than ideal welding surfaces – choose Innershield® NS-3M.
Innershield® NR-207 E71T8-K6 All Position Innershield® NR-207 is designed for vertical down, hot, 34-35
fill and cap passes on standard cross-country pipelines and
arctic grade pipe. It is recommended for API Pipe Grades
X42 up to undermatching X70. For pipe welding up to X70
pipe – choose Innershield® NR-207.
Innershield® NR-208-H E91T8-G-H8 All Position Innershield® NR-208-H is designed to create high strength 36-37
weld deposits with yield strength test results exceeding
minimum AWS requirements. It is recommended for API
Pipe Grade X80. For up to X80 pipe welding applications
– choose Innershield® NR-208-H.
(1) Only 3/32 in. (2.4 mm) diameter is recommended for FEMA 353 and AWS D1.8 applications.
Note: All Innershield® wires are recommended for use with constant voltage (CV) power sources. To estimate ESO, subtract 1/4 in. (6.4 mm) from CTWD.
Innershield ® Wire
7 www.lincolnelectric.com
Innershield NR-5
®
DIAMETERS/PACKAGING
Requirements
AWS E70T-3 480 (70) 180° over 3/4 in. Radius
min. No openings exceeding 1/8 in. —
Innershield ® Wire
8 www.lincolnelectric.com
Innershield NR-5
®
Requirements
AWS E70T-3 Not Specified
Typical Performance(2) 0.17 - 0.22 0.95 - 1.11 0.34 - 0.40 0.008 - 0.02 0.01 - 0.02 0.07 - 0.12 0.40 - 0.49
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
3/32 in. (2.4 mm) 2.5 (100) 22-23 500 4.5 (9.9) 3.5 (7.8) 77
DC+ 3.8 (150) 23-34 435 6.7 (14.8) 5.6 (12.3) 83
32 mm (1 1/4 in.) 5.1 (200) 24-25 510 9.0 (19.8) 7.7 (16.9) 85
6.4 (250) 25-26 575 11.2 (24.7) 9.7 (21.4) 87
0.120 in. (3.0 mm) 3.3 (130) 22-23 500 8.2 (18.0) 7.6 (16.7) 93
DC+ 4.2 (165) 23-24 600 10.4 (23.0) 9.5 (20.9) 91
32 mm (1 1/4 in.) 6.5 (205) 24-25 700 12.9 (28.5) 11.6 (25.6) 90
6.5 (255) 25-26 800 16.1 (35.5) 14.3 (31.5) 90
(1) See test results disclaimer on pg. 42. (2) Chemistry of single pass welds are highly dependent upon base metal chemistry and dilution. Analysis shown are for information purposes only.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
9 www.lincolnelectric.com
Innershield NR-131
®
DIAMETERS/PACKAGING
Requirements
AWS E70T-10 480 (70) 180˚ over 3/4 in. Radius
min. No openings exceeding 1/8 in. —
Innershield ® Wire
10 www.lincolnelectric.com
Innershield NR-131
®
Requirements
AWS E70T-10 Not Specified
Typical Performance(2) 0.22 - 0.26 0.42 - 0.65 0.20 - 0.27 0.005 - 0.007 0.007 - 0.02 1.18 - 1.49
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in./min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
11 www.lincolnelectric.com
Innershield NR-152
®
DIAMETERS/PACKAGING
Requirements
AWS E71T-14 480 (70) 180° over 3/4 in. Radius
min. No openings exceeding 1/8 in. —
Innershield ® Wire
12 www.lincolnelectric.com
Innershield NR-152
®
Requirements
AWS E71T-14 Not Specified
Typical Performance(2) 0.25 - 0.30 0.83 - 1.04 0.20 - 0.23 0.006 - 0.01 0.005 - 0.02 1.08 - 1.38
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1) See test results disclaimer on pg. 42. (2) Chemistry of single pass welds are highly dependent upon base metal chemistry and dilution. Analysis shown are for information purposes only.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
13 www.lincolnelectric.com
Innershield NR-211-MP
®
DIAMETERS/PACKAGING
Requirements(3)
AWS E71T-11 400 (58) 480 - 655 20 —
min. (70 - 95) min.
Innershield ® Wire
14 www.lincolnelectric.com
Innershield NR-211-MP
®
Requirements
AWS E71T-11 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max.
Typical Performance 0.23 - 0.26 0.57 - 0.66 0.17 - 0.26 ≤0.01 ≤0.01 1.3 - 1.6
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in./min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
15 www.lincolnelectric.com
Innershield NR-212
®
DIAMETERS/PACKAGING
14 lb (6.4 kg)
Coil
Diameter 10 lb (4.5 kg) 56 lb (25.4 kg) 25 lb (11.3 kg) 50 lb (22.6 kg)
in. (mm) Plastic Spool Master Carton Steel Spool Coil
Requirements(3)
AWS E71TG-G 400 (58) 480 - 655 20 —
min. (70 - 95) min.
Innershield ® Wire
16 www.lincolnelectric.com
Innershield NR-212
®
Requirements
AWS E71TG-G Not Specified 0.50 min 1.00 max. 0.030 max. 0.030 max. 0.50 min. 0.30 min. 0.20 min. 0.10 min. 1.8 max.
Typical Performance 0.06 - 0.11 0.84 - 1.55 0.20 - 0.33 ≤0.003 0.006 - 0.009 1.02 - 1.15 0.02 - 0.04 ≤0.02 — 1.3 - 1.6
NOTE: In order to meet the alloy AWS requirements of the G group, the weld deposit needs to have the minimum, as specified in the table, of only one of the elements marked with an asterisk.
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1) See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(3) The strength and elongation properties reported were obtained from a 2.85 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.29-05. A naturally aged tensile specimen may
take months to achieve the specified properties. See AWS A5.29-05. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry, the metallurgical structure of
the weld deposit and other factors.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
17 www.lincolnelectric.com
Innershield NR-203MP
®
DIAMETERS/PACKAGING
14 lb (6.4 kg)
Coil
Diameter 56 lb (25.4 kg) 25 lb (11.3 kg)
in. (mm) Master Carton Steel Spool
Charpy V-Notch
Yield Strength(2) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @ -29°C (-20°F) @ -40°C (-40°F) Rockwell B
Requirements(3)
AWS E71T-8J 400 480 - 655 22 Not 27 —
(58) min. (70 - 95) min. min. Specified (20) min.
Typical Performance 415 - 440 510 - 545 29 - 33 75 - 203 68 - 224 82 - 87
(60 - 64) (74 - 79) (55 - 150) (50 - 165)
Innershield ® Wire
18 www.lincolnelectric.com
Innershield NR-203MP
®
Requirements
AWS E71T-8J 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max.
Typical Performance 0.04 - 0.07 1.35 - 1.47 0.22 - 0.32 ≤0.01 ≤0.01 0.8 - 1.0
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1) See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(3) The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.20-05. A naturally aged tensile specimen may take
months to achieve the specified properties. See AWS A5.20-05, paragraph A8.3. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry, the metallurgical structure of the
weld deposit and other factors.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
RADIOGRAPHIC GUIDELINES
The opacity of NR-203MP slag to x-ray is such that slag inclusions will normally appear lighter than the weld. Voids will normally appear darker than the weld.
When using gamma-radiography, slag inclusions and voids will normally appear darker than the weld. Improved x-ray film readability usually can be
obtained by slight over-exposure at an excitation potential consistent with good x-ray practice, but not over 240 KV. For detailed information on welding
techniques, procedure adjustments, and their effects on weld appearance and quality, request publication C3.2400 in.Innershield® Electrode - Semiautomatic
Production Welding Guide in..
Innershield ® Wire
19 www.lincolnelectric.com
Innershield NR-203 Nickel (1%)
®
DIAMETERS/PACKAGING
14 lb (6.4 kg)
Coil
Diameter 56 lb (25.4 kg) 50 lb (22.6 kg)
in. (mm) Master Carton Coil
Charpy V-Notch
Yield Strength(2) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @ -29°C (-20°F) Rockwell B
Requirements(3)
AWS E71T8-Ni1 400 (58) 480 - 620 20 27 (20) —
min. (70 - 90) min. min.
Typical Performance 450 - 480 545 - 575 27 - 32 81 - 156 86 - 90
As-welded (65 - 70) (79 - 83) (60 - 115)
Innershield ® Wire
20 www.lincolnelectric.com
Innershield NR-203 Nickel (1%)
®
Requirements
AWS E71T8-Ni1 0.12 max. 1.50 max. 0.80 max. 0.030 max. 0.030 max. 0.80 - 1.10 0.15 max. 0.35 max. 0.05 max. 1.8 min.
Typical Performance 0.05 - 0.07 1.10 - 1.22 0.30 - 0.33 ≤0.010 0.005 - 0.008 0.89 - 1.05 0.02 - 0.03 0.01 - 0.02 ≤0.01 0.8 - 1.0
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1) See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(3) The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.29-05. A naturally aged tensile specimen
may take months to achieve the specified properties. See AWS A5.29-05. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry, the metallurgical
structure of the weld deposit and other factors.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
21 www.lincolnelectric.com
Innershield NR-232
®
Innershield® NR-232 is designed for high deposition, out-of-position welding for structural fabrication
in seismic zones. It is recommended for single or multiple pass welding of 4.8 mm (3/16 in.) and heavier
carbon steel. For a high deposition FCAW-S wire with impact properties capable of exceeding 27 J
(20 ft•lbf) at -29°C (-20°F) – choose Innershield® NR-232.
DIAMETERS/PACKAGING
Charpy V-Notch
Yield Strength(2) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @ -29°C (-20°F) Rockwell B
Requirements(3)
AWS E71T-8 400 (58) 480 - 655 22 27 (20) —
min. (70 - 95) min. min.
Innershield ® Wire
22 www.lincolnelectric.com
Innershield NR-232
®
Requirements
AWS E71T-8 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max.
Typical Performance 0.16 - 0.18 0.61 - 0.72 0.26 - 0.33 ≤0.01 ≤0.01 0.5 - 0.8
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1)
See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(3)
The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.20-05. A naturally aged tensile
specimen may take months to achieve the specified properties. See AWS A5.20-05, paragraph A8.3. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry,
the metallurgical structure of the weld deposit and other factors.
NOTE: FEMA and AWS D1.8 structural steel seismic supplement test data can be found on this product at www.lincolnelectric.com.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
23 www.lincolnelectric.com
Innershield NR-233
®
Innershield® NR-233 is a good choice for training or novice welders while also meeting the
mechanical property requirements listed in AWS D1.8. It is recommended for vertical up and
overhead fillet and groove welds. For easy out-of-position operability and impact properties
capable of exceeding 27 J (20 ft•lbf) at -29°C (-20°F) – choose Innershield® NR-233.
DIAMETERS/PACKAGING
Charpy V-Notch
Yield Strength(2) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @-29ºC (-20ºF) Rockwell B
Requirements(4)
AWS E71T-8 400 (58) 480 - 655 22 27 (20) —
min. (70 - 95) min. min.
Innershield ® Wire
24 www.lincolnelectric.com
Innershield NR-233
®
Requirements
AWS E71T-8 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max.
Typical Performance 0.15 - 0.20 0.61 - 0.65 0.17 - 0.21 ≤0.03 ≤0.01 0.5 - 0.6
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
25 www.lincolnelectric.com
Innershield NR-305
®
D 1.8
(AWS E70T-6) Structural Welding Code
Seismic Supplement
Innershield® NR-305 is designed for in-position, high deposition welding on carbon steel. It is
recommended in single or multiple pass, automatic and semiautomatic welding. For impact properties
capable of exceeding 27 J (20 ft•lbf) at -29°C (-20°F) and excellent operator appeal – choose
Innershield® NR-305.
DIAMETERS/PACKAGING
Charpy V-Notch
Yield Strength(3) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @ -29°C (-20°F) Rockwell B
Requirements(4)
AWS E70T-6 400 (58) 480 - 655 22 27 (20) —
min. (70 - 95) min. min.
Typical Performance 465 - 535 565 - 620 24 - 28 27 - 41 88 - 93
As-welded (68 - 77) (82 - 90) (20 - 30)
Innershield ® Wire
26 www.lincolnelectric.com
Innershield NR-305
®
Requirements
AWS E70T-6 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max.
Typical Performance 0.06 - 0.09 1.08 - 1.57 0.20 - 0.27 ≤0.01 ≤0.01 0.9 - 1.1
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
3/32 in. (2.4 mm) 4.1 (160) 21-23 330 6.0 (13.3) 5.0 (11.0) 82
DC+ 6.1 (240) 24-26 425 9.1 (20.0) 7.6 (16.7) 83
54 mm (2 1/4 in.) 7.6 (300) 27-29 475 11.3 (25.0) 9.5 (21.0) 84
10.2 (400) 33-35 525 15.2 (33.4) 12.7 (28.0) 83
(1)
Only 3/32 in. (2.4 mm) diameter is recommended for FEMA 353 and AWS D1.8 applications. (2) See test results disclaimer on pg. 42. (3) Measured with 0.2% offset.
(4)
The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.20-05. A naturally aged tensile specimen
may take months to achieve the specified properties. See AWS A5.20-05. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry, the metallurgical
structure of the weld deposit and other factors.
NOTE: FEMA and AWS D1.8 structural steel seismic supplement test data can be found on this product at www.lincolnelectric.com.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
27 www.lincolnelectric.com
Innershield NR-311 Ni
®
D 1.8
(AWS E70T-7-K2, E80T-G-K2) Structural Welding Code
Seismic Supplement
Innershield® NR-311 Ni is designed to provide a nominal 1.5% nickel weld deposit with high deposition
rates and fast travel. It is recommended for flat and horizontal positions in single and multiple pass
welding. For impact properties capable of exceeding 27 J (20 ft•lbf) at -29°C (-20°F) – choose
Innershield® NR-311 Ni.
DIAMETERS / PACKAGING
Charpy V-Notch
Yield Strength(3) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @-29°C (-20°F) Rockwell B
Requirements(4)
AWS E70T-7-K2 400 (58) 480 - 620 20 27 (20) —
AWS E80T-G-K2 min. (70 - 90) min. min.
Innershield ® Wire
28 www.lincolnelectric.com
Innershield NR-311 Ni
®
Requirements
AWS E70T-7-K2 0.15 0.50 - 1.75 0.80 0.030 0.030 1.00 - 2.00 0.15 0.35 0.05 1.8
AWS E80T-G-K2 max. max. max. max. max. max. max. max.
Typical Performance 0.06 - 0.08 1.25 - 1.40 0.18 - 0.22 ≤0.003 0.005 - 0.008 1.29 - 1.56 0.03 - 0.04 ≤0.03 — 1.0 - 1.3
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1)
Only 3/32 in. (2.4 mm) diameter is recommended for FEMA 353 and AWS D1.8 applications. (2) See test results disclaimer on pg. 42. (3) Measured with 0.2% offset.
(2)
The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.29-05. A naturally aged tensile specimen may
take months to achieve the specified properties. See AWS A5.29-05. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry, the metallurgical structure
of the weld deposit and other factors.
NOTE: FEMA and AWS D1.8 structural steel seismic supplement test data can be found on this product at www.lincolnelectric.com.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
29 www.lincolnelectric.com
Innershield NR-311
®
DIAMETERS/PACKAGING
14 lb (6.4 kg)
Coil
Diameter 56 lb (25.4 kg) 25 lb (11.3 kg) 50 lb (22.6 kg) 600 lb (272.2 kg) 600 lb (272.2 kg)
in. (mm) Master Carton Steel Spool Coil Speed-Feed® Reel Speed-Feed®Drum
Requirements(3)
AWS E70T-7 400 (58) 480 - 655 22 —
min. (70 -95) min.
Typical Performance 420 - 475 600 - 645 23 - 26 88 - 92
(61 - 69) (87 - 93)
Innershield ® Wire
30 www.lincolnelectric.com
Innershield NR-311
®
Requirements
AWS E70T-7 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max.
Typical Performance 0.25 - 0.29 0.44 - 0.51 0.09 - 0.12 ≤0.01 ≤0.01 1.4 - 1.7
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
5/64 in. (2.0 mm) 2.5 (100) 20-23 190 2.9 (6.4) 2.3 (5.0) 78
DC- 4.1 (160) 24-28 275 4.7 (10.3) 3.6 (8.0) 78
38 mm (1 1/2 in.) 6.1 (240) 25-29 355 7.0 (15.4) 5.6 (12.4) 80
7.6 (300) 27-31 410 8.8 (19.3) 7.2 (15.8) 82
(1) See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(3) The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.20-05. A naturally aged tensile
specimen may take months to achieve the specified properties. See AWS A5.20-05, paragraph A8.3. The time required for the natural aging of weld deposits is dependent upon ambient conditions,
weldment geometry, the metallurgical structure of the weld deposit and other factors.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
31 www.lincolnelectric.com
Innershield NS-3M
®
DIAMETERS / PACKAGING
14 lb (6.4 kg)
Coil 600 lb (272.2 kg)
Diameter 56 lb (25.4 kg) 50 lb (22.6 kg) Speed-Feed®
in. (mm) Master Carton Coil Drum
Requirements(3)
AWS E70T-4 400 (58) 480 - 655 22 —
min. (70 - 95) min.
Innershield ® Wire
32 www.lincolnelectric.com
Innershield NS-3M
®
Requirements
AWS E70T-4 0.30 max. 1.75 max. 0.60 max. 0.03 max. 0.03 max. 1.8 max.
Typical Performance 0.21 - 0.25 0.37 - 0.53 0.25 - 0.29 ≤0.01 ≤0.01 1.3 - 1.6
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
5/64 in. (2.0 mm) (5.1) 200 29-31 280 (5.5) 12.2 (4.6) 10.1 83
DC+ (6.1) 240 30-32 315 (6.7) 14.8 (5.5) 12.1 82
54 mm (2 1/4 in.) (6.6) 260 30-32 330 (7.3) 16.0 (6.0) 13.2 83
(7.6) 300 31-33 350 (8.4) 18.6 (6.9) 15.2 82
0.120 in. (3.0 mm) (3.5) 140 28-30 380 (9.0) 19.8 (7.0) 15.5 78
DC+ (4.4) 175 29-31 450 (11.2) 24.6 (9.1) 20.0 81
76 mm (3 in.) (5.1) 200 30-32 500 (12.7) 28.0 (10.5) 23.2 83
Electrical Stickout: (7.6) 300 31-33 550 (14.2) 31.4 (11.9) 26.2 83
2 - 3/4 in. (70 mm)
0.120 in. (3.0 mm) (5.3) 210 35-37 450 (13.2) 29.0 (11.3) 25.0 86
DC+ (6.4) 250 36-38 500 (15.6) 34.5 (13.2) 29.0 84
102 mm (4 in.) (7.6) 300 37-39 550 (18.8) 41.5 (15.4) 34.0 82
Electrical Stickout: (9.0) 355 38-40 600 (22.2) 49.0 (18.0) 39.5 81
3 - 3/4 in. (95 mm)
(1) See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(3) The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours, as permitted by AWS A5.20-05. A naturally aged tensile
specimen may take months to achieve the specified properties. See AWS A5.20-05, paragraph A8.3. The time required for the natural aging of weld deposits is dependent upon ambient conditions,
weldment geometry, the metallurgical structure of the weld deposit and other factors.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
33 www.lincolnelectric.com
Innershield NR-207
®
DIAMETERS/PACKAGING
14 lb (6.4 kg)
Coil
Diameter 56 lb (25.4 kg)
in. (mm) Hermetically Sealed Pail
Charpy V-Notch
Yield Strength(2) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @ -29°C (-20°F) Rockwell B
Requirements(3)
AWS E71T8-K6 400 (58) 480 - 620 20 27 (20) —
min. (70 - 90) min. min.
Innershield ® Wire
34 www.lincolnelectric.com
Innershield NR-207
®
Requirements
AWS E71T8-K6 0.15 max. 0.50 - 1.50 0.80 max. 0.030 max. 0.030 max. 0.40 - 1.00 0.20 max. 0.15 max. 0.05 max. 1.8 max.
Typical 0.05 - 0.07 0.87 - 0.96 0.23 - 0.27 ≤0.003 0.004 - 0.008 0.73 - 0.83 0.02 - 0.03 0.02 - 0.03 ≤0.01 0.9 - 1.1
Performance
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1) See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(3) The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 104°C (220°F) for 48 hours,as permitted by AWS A5.29-05. A naturally aged tensile specimen
may take months to achieve the specified properties. See AWS A5.29-05. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry, the metallurgical
structure of the weld deposit and other factors.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
35 www.lincolnelectric.com
Innershield NR-208-H
®
DIAMETERS/PACKAGING
14 lb (6.4 kg)
Coil
Diameter 56 lb (25.4 kg)
in. (mm) Hermetically Sealed Pail
Charpy V-Notch
Yield Strength(2) Tensile Strength Elongation J (ft•lbf) Hardness
MPa (ksi) MPa (ksi) (%) @ -29°C (-20°F) Rockwell
Requirements(3)
AWS E91T8-G-H8 538 (78) 620 - 758 17 Not —
min. (90 - 110) min. Specified
Innershield ® Wire
36 www.lincolnelectric.com
Innershield NR-208-H
®
Diffusible Hydrogen
%C %Mn %Si %S %P %Ni %Cr %Mo %V %Al (mL/100g)
Requirements
AWS E91T8-G-H8 Not Specified 0.50 min. 1.00 max. 0.030 max. 0.030 max. 0.50 min. 0.30 min. 0.20 max. 0.10 min. 1.8 min. 8.0 max.
Typical 0.04 - 0.07 1.48 - 2.02 0.11 - 0.31 ≤0.003 0.004 - 0.010 0.71 - 0.98 0.02 - 0.03 ≤0.04 ≤0.01 0.9- 1.2 ≤8
Performance
Diameter Approx.
Polarity Wire Feed Speed Voltage Current Melt-Off Rate Deposition Rate Efficiency
CTWD m/min (in/min) (volts) (amps) kg/hr (lb/hr) kg/hr (lb/hr) (%)
(1)
See test results disclaimer on pg. 42. (2) Measured with 0.2% offset.
(2)
The strength and elongation properties reported were obtained from a 2.8 mm (0.505 in.) tensile specimen artificially aged at 220°F (104°C) for 48 hours,as permitted by AWS A5.29-05. A naturally aged tensile
specimen may take months to achieve the specified properties. See AWS A5.29-05. The time required for the natural aging of weld deposits is dependent upon ambient conditions, weldment geometry,
the metallurgical structure of the weld deposit and other factors.
NOTE: In order to meet the alloy requirements of the G group, the weld deposit needs to have the minimum, as specified in the table, of only one of the elements marked with an asterisk.
Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com
Innershield ® Wire
37 www.lincolnelectric.com
Packaging
Lincoln Electric’s Innershield® self-shielded flux-cored wires are Packaging Shown:
available in a variety of packaging options to meet your specific 1. 10 lb. (4.5 kg) - Plastic Spool
application requirements.
2. 600 lb. (272.2 kg) - Speed-Feed® Drum
Bulk packaging includes Speed-Feed® drums and reels built to 3. 600 lb. (272.2 kg) - Speed-Feed® Reel
deliver consistent performance in conventional automation and 4. 1 lb. (0.5 kg) Plastic Spool, 5 lb. (2.3 kg)
Master Carton
robotic applications, as well as semiautomatic applications.
Speed-Feed® drums must be rotated for proper wire payoff. 5. 13.5 lb (6.1 kg) Coil, 54 lb. (24.5 kg)
Master Hermetically Sealed Pail
Small packaging configurations include spools and coils from 6. 25 lb. (11.3 kg) Steel Spool
1 - 50 lb. (0.4 - 23 kg). Several packages are available in either 7. 25 lb. (11.3 kg) - Plastic Spool with
hermetically sealed pails or vacuum sealed foil bags to meet Vaccum Sealed Foil Bag
FEMA 353 and AWS D1.8 package requirements. 8. 50 lb. (22.6 kg) - Coil
1 2 3
4 5 6 7 8
Innershield ® Wire
38 www.lincolnelectric.com
Agency Approvals
AGENCY APPROVALS(1)
FEMA 353
AWS and
Product(2) Class ABS Lloyd’s DNV BV GL CWB DB TUV AWS D1.8
NR-5 E70T-3
NR-131 E70T-10
NR-152 E71T-14
NR-203MP E71T-8J 3YSA(4) 3S-3YS-H15 III YMS SA3YMH 3YSH15 W48 E491T-8
(H10)
NR-203 E71T8-Ni1 3YSA 3S-3YS-H15 III YMS E71T-8-Ni1(3) EN 758 T42 3 1 Ni Y N EN 758 T42 3 1 Ni Y N
Nickel (1%) (H10)
NR-232(6) E71T-8 3YSA(5) 3S-3YS-H15 III YMS SA3YMH 3YSH10 W48 E491T-8 EN 758 T42 3 Y N 2 EN 758 T42 3 Y N 2 All
(H15) Diameters
NR-305 E70T-6 2YSA II YMS EN 758 T42 O W N 3 EN 758 T42 O W N 3 3/32 in.
(5/64 in. only) only
E70T-6(3)
(3/32 in. only)
NR-311 Ni E70T-7-K2 2YSA 2S-2YS II YMS SA2YM 2YS EN 758 T42 2 1, EN 758 T42 2 1, 3/32 in.
E80T-G-K2 5Ni WN5 5Ni WN5 only
NR-207 E71T8-K6 E71T-8-K6(3) III YMS SA3YMH 2YSH15 EN 758 T42 3 1Ni Y N 1 H15
(H15)
NR-208-H E91T8-G-H8
(1) Approvals are updated periodically. Consult your local Lincoln district office for the latest Approval/Grade revision. (2) For diameters 0.035 in. (0.9 mm), 0.045 in. (1.1 mm), 0.068 in. (1.7 mm), 5/64 in. (2.0 mm) only.
(3) To AWS rules. (4) Vertical Up and OH 0.040 - 5/64 in. (1.0 - 2.0 mm) diameters only. Vertical down for 0.068 in. (1.7 mm) and 5/64 in. (2.0 mm) (5) Non-low hydrogen wire. Requires special approval for high strength steel.
(6) Innershield® NR-232 has a Military Grade Classification of MIL-71T-8AS for 0.068 in. (1.7 mm) and 0.072 in. (1.8 mm) diameters only.
Innershield ® Wire
39 www.lincolnelectric.com
STORAGE RECOMMENDATIONS FOR FLUX-CORED (FCAW-G AND FCAW-S) ELECTRODES
Lincoln Electric flux-cored electrodes perform best when 3. When not in use, electrodes should be placed in original
kept dry and stored properly. Electrode should be used packaging and sealed as best as possible.
directly from the original, undamaged package, and when
4. If exposed to moisture conditions, discard any rusty
stored in accordance to the conditions listed below.
electrode.
When proper procedures are not followed, consumables
5. For applications in which the weld metal hydrogen must
may show signs of moisture. These include porosity, a rough
be controlled (usually 8 mL or lower), or where shipping
bead surface or slag that is unusually difficult to remove.
and storage conditions are not controlled or known, only
The following minimum precautions should be taken to hermetically sealed packaging is recommended.
safeguard the electrode after opening the original package:
6. After exposure, hydrogen levels can be reduced by
1. It is recommended to use electrodes within one week conditioning the electrode. Electrodes may be
of opening the original package. conditioned at a temperature of 100ºC ± 14ºC (250ºF ±
25ºF) for a period of 6 to 12 hours, cooled and then
2. Open electrodes should not be exposed to damp
stored in seal poly bags (4 mL minimum thickness) or
moisture conditions or extremes in temperature and/or
equivalent. Electrode on plastic spools should not be
humidity where surface condensation can occur.
heated at temperatures in excess of 65ºC (150ºF).
Innershield ® Wire
40 www.lincolnelectric.com
NOTES
Innershield ® Wire
41 www.lincolnelectric.com
NOTES
T E S T R E S U LT S
Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed
standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not
limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropri-
ate means, the suitability of any welding consumable and procedure before use in the intended application.
C U S T O M E R A S S I S TA N C E P O L I C Y
The business of The Lincoln Electric Company® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of
our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to
inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not
in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume
any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or
implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is
specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
Innershield ® Wire
42 www.lincolnelectric.com
DISTRICT SALES OFFICES
International Headquarters
LATIN AMERICA EUROPE RUSSIA, AFRICA & ASIA PACIFIC
Miami, Florida U.S.A. Barcelona, Spain MIDDLE EAST Shanghai
Phone: (305) 888-3203 Phone: 34 91 816 4266 Cleveland, Ohio U.S.A. Phone: 86 21 6602 6620
Phone: (216) 481-8100 Australia
Phone: 61 2 9772 7222
4501 Quality Place, Mason, Ohio 45040 U.S.A. • Web Site: www.harrisproductsgroup.com
Consumables: ph: 1-800-733-8912, fax: (513) 754-8778 • Equipment: ph: 1-800-241-0804, fax: (770) 535-0544
Innershield ® Wire
43 www.lincolnelectric.com
THE LINCOLN ELECTRIC COMPANY
22801 St. Clair Avenue • Cleveland, OH U.S.A. • 44117-1199
Phone: +1.216.481.8100 • www.lincolnelectric.com
C3.2000 7/09 © The Lincoln Electric Co. All Rights Reserved. Printed in the U.S.A.