Professional Documents
Culture Documents
JOINT POSITION
Type Square Groove Position of Groove Overhead
Backing Yes No Single Weld Double Weld Fillet
Backing Material N/A Vertical Progression: Up Down
Root Opening See Above Root Face Dimension See Above ELECTRICAL CHARACTERISTICS
Groove Angle See Above Radius(J-U) Not Used Transfer Mode (GMAW)
Back Gouge Yes No Method Carbon Arc/ Grinding Short-Circuiting Globular Spray
Current: AC DCEP DCEN Pulsed
BASE METALS
Material Spec. Group I & II Other: ____________________________________________
Type or Grace _____________ to _____________
Thickness: Groove (in) .25” Max - Unlimited Tungsten Electrode (GTAW):
Fillet (in) - Size N/A Type N/A
Diameter (Pipe, ) -
Process Filler Metal & AWS Class Diameter Polarity Wire Feed Amps Volts
(in) Speed
SMAW E7018 H4R 5/32 DC+ N/A 130-210 N/A
Or equivalent from any other 3/16 DC+ N/A 185-300 N/A
Manufacturers
This procedure may vary due to fabrication sequence, fit-up, pass size, etc. within the limitation of variables given in ANSI/AWS D1.1
2008, Structural Welding Code – Steel.