Professional Documents
Culture Documents
30lbe51br001-Rev 2 - 1
30lbe51br001-Rev 2 - 1
NPD Weight
Description Qty
[DN] [Kg]
N
A 1 PIPE-SMLS, S-60, A335-P92, ASME-B36.10M 450 3.2 M 645.5 A
1 SEE ISO 2 REINFORCED NOZZLE, S-60 x S-STD, A182-F91, DWG NO. 450X25 2 2.6
30LBF11BR001 : SH-RN-A2B-6000900
+X=+3650/12-30UMY01 3 PLATE, A387-22, PL20x350x350 273 4 76.8
+Y=+827/A-30UMY01 4 DUMMY PIPE, S-80, A335-P91, ASME-B36.10M 250 0.4 M 35.4
+Z=+12871 5 DUMMY PIPE, S-80, A335-P91, ASME-B36.10M 250 0.5 M 41.8
6 DUMMY PIPE, S-80, A335-P91, ASME-B36.10M 250 0.4 M 34.8
450NPD
7 DUMMY PIPE, S-80, A335-P91, ASME-B36.10M 250 0.5 M 41.8
B B
350
561
9.1
SEE DETAIL A
C 4 C
FFW(F.A)
684+350
1A 1B 1C
1D 1E 1F
1G 1H
+Z=+11837
SEE ISO
30LBF11BR003
+X=+3650/12-30UMY01 SEE ISO
+Y=+1176/A-30UMY01 30LBE51BR501
+Z=+11837 3 +X=+3999/12-30UMY01
E +Y=+827/A-30UMY01 E
+Z=+11837
5
2.2
2.1
450X25NPD
DETAIL B ORIENT
450X25NPD 949.1
(LOOKING DOWN) ORIENT
NORTH
349 EAST PENGERANG POWER SDN BHD
(Company No. 1089490-K)
349
Level 51, Tower 2, PETRONAS Twin Towers
Kuala Lumpur City Centre
50088 Kuala Lumpur, Malaysia
F F
PETRONAS PETRONAS TECHNICAL SERVICES SDN BHD
TECHNICAL (Company No. 347848-X)
SERVICES
Tower 1, PETRONAS Twin Towers
Kuala Lumpur City Centre
50088 Kuala Lumpur, Malaysia
2453
G G
30LBE51BR001-SPL-1
SEONGHWA
Industrial Co., Ltd
PCP-SAG-PIP-ISO-LBE-479528
Ursprung/Original Ursprung-Nr./Original-No. REV Urspr.-PKZ-Nr.
J SEE ISO Orig.-PC J
MY1008-30LBE51-&MTB020-111339 01/00
SHEET 2
80
1A 250 S FIL 273.0 15.09 Yes 3 25 S O-LET 33.4 3.38 Yes 2RA S FIL 124.5 6.0 No P P Liquid Penetration Examination
0 0 0 0 0 0 0 0
1B 250 S FIL 273.0 15.09 Yes 2JA S FIL 60.8 6.0 No 5 25 S O-LET 33.4 3.38 Yes - -
S 25 0 100 100 S 25 0 100 100 Magnetic Examination
1C 250 S FIL 273.0 15.09 Yes 2KA S FIL 60.8 6.0 No
L 1D 250 S FIL 273.0 15.09 Yes 2LA S FIL 92.6 6.0 No H 25 0 0 0 H 25 0 0 0 Hardness Testing
1E 250 S FIL 273.0 8.0 Yes 2MA S FIL 92.6 6.0 No M 10 0 10 10 M 10 0 10 10 Metascope or ferritic check 2016-01-07 M.J.Shin Piping
1F 250 S FIL 273.0 8.0 Yes 2NA S FIL 92.6 6.0 No V V Visual Examination 2016-01-07 S.W.Kim
Exportkennzeichnung AL: ECCN:
Remarks
100 100 100 100 100 100 100
The extent of NDE is mandatory for shop and field welds of the
100
2016-01-07 J.W.Han
Isometric 30LBE51BR001
respective piping system as a designated lot.
Bearbeitung dieses Dokumentes, Verwertung und Mitteilung
- Final dimensions of valves and in- line components to be
checked by erection contractor before installation. General Weld type Addition for extent of NDE below 100%: All materials, all nominal pipe sizes Building: 30UMY
gestattet. Zuwiderhandlungen verpflichten zu Schadenersatz.
- Pipe routing NPS < 3" (DN80) should be Position number acc. partlist BW : Butt weld and all welders shall be considered for a random spot examination of welds
bzw bei Kennzeichen "AL:N" oder "ECCN:N", kann sich eine Genehmigungspflicht, unter anderem
checked by erection contractor at site Shop weld number SW : Socket weld Set of Rules for
oder Geschmacks-mustereintragung vorbehalten. Insulation 320 mm
- All pipes without fit-up allowance Field weld number O-LET : Weldolet, sockolet Construction
Transmittal, reproduction, dissemination and/or editing of this Export classification AL: ECCN: - Fit-up allowance of pipe = 150mm, Support type RFN : Reinforce Nozzle
Pipe Material Class A90A4RA0120 max. allow. work. Temperature 580 C 02_00
M document as well as utilization of its contents and Goods labeled with "AL not equal to N" are subject to European or German export authorization which is additional marked with "+150" KKS-support number FIL : Fillet
20
communication thereof to others without express authorization - For Part No. only figure before dot to be Slope SF : Socket Fusion
are prohibited. Offenders will be held liable for payment of
when being exported out of the EU. Goods labeled with "ECCN not equal to N" are subject to US
matched with BOM Part No.
Internal Coating max. allow. work. Pressure 67 bar MY1008-30LBE51-&MTC030-479528
reexport authorization. Even without a label, or with label "AL:N" or"ECCN:N", authorization may be Flow direction F : Field weld
damages. All rights created by patent grant or registration of a - For shop pre-fabrication Referance S : Shop weld
utility model or design patent are reserved.
required due to the final whereabouts and purpose for which the goods are to be used.
drawing no. External Coating MY1008-61810-&MDC080-484504 Test Pressure 100.5 bar 1 /2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16