Professional Documents
Culture Documents
Taza Muñeco Nieve
Taza Muñeco Nieve
Crochet pattern
1
Thank you for purchasing my pattern!
Enjoy crocheting.
This pattern is a work of authorship, and it intends only for personal use!
I appreciate it if you do not share, reproduce or sell this pattern, either in its
entirety or in parts!
Note!
Please, note that this pattern does not include the lessons of crocheting.
You must have previous knowledge of crochet techniques.
You are welcome to sell the ready product made with this pattern, but
credit @dorogina_toys is appreciated. Put hashtag #dorogina_toys for me to
see your ready toy.
Yarn Art Jeans No. 51, 28, 90 (cherry, dark grey, red) – a mug, a hat
Yarn Art Jeans No. 35, 70, 69 (yellow, dark brown, green) – a nose, arms, a
scarf, and decoration
2
Alize Cotton Gold No. 62 (white) – a snowman
2.0 mm or 2.25 mm crochet hook
Stuffing material (fiberfill/polyester)
Tapestry needle
Scissors
Stitch markers (a scrap of contrasting yarn)
Pins
Two cardboard circles for the bottom of a mug, about 5.8 - 6 cm (2.3 - 2.4
inches)
A piece of wire 7-8 cm (3 inches) long, 3 pieces - for a handle of the mug and
arms of a snowman
Adhesive tape to secure the wireframe ends
Pliers
Sewing black thread for the embroidery of the eyes
MUG
Yarn Art Jeans No. 51 - (cherry)
Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
3
Rnd 7: (5 sc, inc)*8 (56)
Rnd 8: (6 sc, inc)*8 (64)
Rnd 9: (7 sc, inc)*8 (72)
Rnd 10: (8 sc, inc)*8 (80)
Rnds 11-28: 80 sc (18 rounds)
* Crochet the next round through front loops only.
Rnd 29: 80 sc
* Crochet the next round through both loops.
Rnd 30: 80 sc
Trace the bottom of the mug on the cardboard and cut it out. Put the
template inside.
4
SNOWMAN
Attach white yarn to round 29. (Alize Cotton Gold No. 62)
5
Rnd 12: (4 sc, dec)*8 (40)
Rnd 13: 40 sc
Stuff it with fiberfill.
ARMS
INSERT THE WIREFRAME.
Mark the position on the sides symmetrically using pins.
1. Insert the wireframe into the pinned points.
2. Bend the edge of the wire using the pliers.
3. Secure the ends with adhesive tape.
4. Curl the ends of the wireframe. Secure it with adhesive tape.
5. Stuff with fiberfill.
6
Continue crocheting the snowman.
Rnd 14: (4 sc, inc)*8 (48)
Rnd 15: (5 sc, inc)*8 (56)
Rnd 16: (6 sc, inc)*8 (64)
Rnd 17: 64 sc
Rnd 18: (7 sc, inc)*8 (72)
Rnds 19-26: 72 sc (8 rounds)
Rnd 27: (7 sc, dec)*8 (64)
Rnds 28-29: 64 sc (2 rounds)
Rnd 30: (6 sc, dec)*8 (56)
7
Rnd 31: (5 sc, dec)*8 (48)
Rnd 32: 48 sc
Rnd 33: (4 sc, dec)*8 (40)
Stuff with fiberfill.
Rnd 34: 40 sc
Rnd 35: (3 sc, dec)*8 (32)
Rnd 36: 32 sc
Rnd 37: (2 sc, dec)*8 (24)
Rnd 38: (1 sc, dec)*8 (16)
Rnd 39: (2 sc, dec)*4 (12)
Break yarn, leaving a long tail for tightening the hole.
Stuff it with fiberfill. Do not tighten the hole!
NOSE
Yarn Art Jeans No. 35 - (yellow)
Rnd 1: 4 into MR
Rnd 2: 4 inc (8)
Rnds 3-4: 8 sc (2 rounds)
Rnd 5: (1 sc, inc)*4 (12)
Rnd 6: 12 sc, 2 sl st
Break yarn, tighten the hole, and hide the tail inside.
Stuff the nose with fiberfill.
ARMS (make 2)
Yarn Art Jeans No. 70 - (dark brown)
Rnd 1: 6 into MR
Rnd 2: (1 sc, inc)*3 (9)
Rnds 3-5: 9 sc (3 rounds)
In the next round, crochet the thumb.
Rnd 6: 4 sc, (DC5tog cluster), 4 sc (9)
8
In the illustration below, you see only three loops on the hook. Make five.
Once you crochet bobble stitch, you need to turn it inside out.
9
Rnds 7-20: 9 sc (14 rounds), 2 sl st
NOTE! Try on the arm onto the wireframe. Crochet more or fewer rounds if
needed.
Break yarn, leaving a long tail for sewing.
BUTTON
Yarn Art Jeans No. 28 - (dark grey)
Rnd 1: 6 into MR, 1 sl st
Break yarn.
ASSEMBLY
1. Sew the nose.
(Insert the needle and draw it out in the hole on the top of the head).
Pin the nose. Split yellow yarn in half and sew it on.
10
The position of the nose: the bottom part is in round 19 from the mug and
the upper part of the nose is in round 22 from the mug.
Tie the ends of the yarn and hide inside the toy.
11
Mark the position of the mouth and embroider it with black thread.
12
3. Sew a button.
4. Embroider snowflakes.
Mark the borders of the snowflake.
Embroider the snowflakes using a white yarn strand. Previously, split it in
half.
Snowflake parameters (1 cell = 1 sc)
13
5. Stuff with fiberfill. Tighten the hole using a tapestry needle.
Tighten the hole, weaving through each of the 12 front loops of the last
round, and pull tight.
Once you weaved through 12 loops, weave through 2-3 loops at once with a
tapestry needle. Do not forget to tighten. Repeat 3 times. Cut the excess yarn
and hide the yarn tail inside the bear.
14
MUG HANDLES
Yarn Art Jeans No. 51 - (cherry)
Chain 12 and form a circle. Crochet in a circle:
Rnds 1-4: 12 sc (4 rounds)
Rnd 5: 3 sc, 3 dec, 3 sc (9)
Rnds 6-21: 9 sc (16 rounds), 1 sl st
Prepare a wireframe with the same length as the handle. Bend the ends,
and secure them with adhesive tape. Insert wireframe into the handle and
stuff with fiberfill.
15
Bend the handle and sew it to the mug.
LEAF (make 2)
Yarn Art Jeans No. 69 (green)
Chain 12, start working in the second chain from a hook in the back
direction- 10 sc, 3 sc in 1 stitch.
Continue crocheting on the other side of the chain foundation -
– 9 sc, 3 sc in 1 stitch. (25)
16
Rnd 2: (3 sc, chain 3, 1 sc in the previous stitch)*3, 3 sc, chain 3, 1 sc in
the previous stitch, (3 sc, chain 3, 1 sc in the previous stitch)*3,
2 sc, 2 sl st.
Iron the leaves with steam through a damp cloth for a few seconds to
make them flat.
17
BERRIES (make 3)
Yarn Art Jeans No. 90 (red)
Chain 7. Start working in the second chain from a hook 3 Bobble stitches
similar to the thumb for the arm of our snowman.
Crochet in the second chain – ((dc4tog cluster), 1 sc)*3
Turn all bobbles inside out.
Make 1 sl st in the first bobble. Tie the yarn tails together.
18
HAT
Yarn Art Jeans No. 28 - (dark grey)
Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
Rnd 7: (5 sc, inc)*8 (56)
Rnd 8: (6 sc, inc)*8 (64)
Rnd 9: (7 sc, inc)*8 (72)
19
* Crochet all the next rounds through both loops.
20
Cut a circle of cardboard around the diameter of the hat.
Break yarn and tighten. Hide the yarn tail inside the hat.
Iron the edges of the hat to keep it flat. Place a damp cloth on top of the
brim of your hat and steam it off for a few seconds.
21
SEW THE LEAVES AND BERRIES TO THE HAT
Stuff the hat with fiberfill. Put a hat on the snowman, pin it and sew it with
black thread.
22
SCARF
Yarn Art Jeans No. 90, 69 - (red, green)
Chain 81. Start working in the second chain from hook in the back direction:
23
* Crochet the next round through front loops only.
Rnd 11: 12 sc
* Crochet the next round through both loops.
Rnds 12-13: 12 sc (2 rounds)
Stuff it with fiberfill.
Break yarn, leaving a long tail for tightening the hole or making a loop.
Make a loop and fasten off. Hide the yarn tail inside.
24
Congratulation! Your snowman mug is finished!
Thank you for purchasing my pattern.
I hope that you liked the pattern and enjoyed crocheting.
25