Professional Documents
Culture Documents
for Metals
E = Modulus of Elasticity. Msi (Millions of psi). at Temperature. OF
Material -425 -400 -350 -325 -200 -100 70 200 300 400
Ferrous Metals
Gray cast iron
Carbon steels. C 5 0.3%
Carbon steels. C > 0.3%
Carbon-moly steels
90Cu-10Ni (C70600)
Leaded Ni-bronze
80Cu-20Ni (C71000)
70Cu-30Ni (C71500)
Unalloyed Titanium
Grades 1. 2. 3. and 7
Zirconium Alloys
Table C-6 Modulus of Elasticity, U.S. Units, for Metals (10)
E = Modulus of Elasticity, Msi (Millions of psi), at Temperature, OF
500 600 700 800 900 1000 1100 1200 1300 1400 1500 Material
Ferrous Metals 1
Gray cast iron
Carbon steels, C 2 0.3%
Carbon steels, C > 0.3%
Carbon-moly steels
26.7 26.1 25.6 24.7 22.2 21.5 19.1 16.6 ... ... ... Chromium steels, Cr 12%, 17%, 27%
25.8 25.3 24.8 24.1 23.5 22.8 22.1 21.2 20.2 19.2 18.1 Austenitic steels (TP304, 310, 316, 321, 347)
90Cu-10Ni (C70600)
Leaded Ni-bronze
80Cu-20Ni (C71000)
70Cu-30Ni (C71500)
Unalloyed Titanium
Grades 1, 2, 3, and 7
Zirconium Alloys
Table C-6 Modulus of Elasticity, U.S. Units, for Metals (Cont'd)
E = Modulus of Elasticity, Msi (Millions of psi), at Temperature, O F
Material -425 -400 -350 -325 -200 -100 70 200 300 400
GENERAL NOTE: For Code references to this Appendix, see para. 319.3.2. These data are for use in the absence of more applicable data. It
is the designer's responsibility to verify that materials are suitable for the intended service at the temperatures shown.