Professional Documents
Culture Documents
International Standard 11127-4
International Standard 11127-4
STANDARD 11127-4
First edition
1993-l 2-15
--`,,,`-`-`,,`,,`,`,,`---
Reference number
IS0 11127-4:1993(E)
Foreword
--`,,,`-`-`,,`,,`,`,,`---
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
IS0 11127 consists of the following parts, under the general title Prep-
aration of steel substrates before application of paints and related
products - Test methods for non-metallic blast-cleaning abrasives:
- Part 1: Sampling
0 IS0 1993
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
Copyright International Organization for Standardization
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
0 IS0 IS0 11127-4:1993(E)
At the time of publication of this part of IS0 11127, part 8 was in course
of preparation.
Annex A of this part of IS0 11127 is for information only.
--`,,,`-`-`,,`,,`,`,,`---
Part 4:
Assessment of hardness by a glass slide test
--`,,,`-`-`,,`,,`,`,,`---
a) all details necessary to identify the product tested, d) any deviation from the test method specified;
in accordance with the appropriate part of
IS0 11126 (see annex A), if applicable; e) the date of the test;
--`,,,`-`-`,,`,,`,`,,`---
Annex A
(informative)
Requirements and test methods for non-metallic IS0 11127 will consist of the following parts, under
blast-cleaning abrasives are contained in IS0 11126 the general title:
and IS0 11127 respectively.
Preparation of steel substrates before application
IS0 11126 will consist of the following parts under of paints and related products - Test methods for
the general title: non-metallic blast-cleaning abrasives
3
Copyright International Organization for Standardization
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
IS0 11127-4:1993(E) (0 IS0
--`,,,`-`-`,,`,,`,`,,`---
UDC 667.648.1:621.7.023:621.921.2/.3:620.178.14
Descriptors: paints, varnishes, substrates, steel products, blast-cleaning, abrasives, non-metallic abrasives, tests, hardness tests,
scratch hardness tests.
Price based on 3 pages