Professional Documents
Culture Documents
Q1. Apply the various geometrical techniques to c onstruct the geometrical template
as shown in Figure 1. Do NOT dimension it. (5 M)
Figure 1
Q2. Illustrate graphically the locus of a point on the circumference of a circle which
rolls on the periphery of a curved path.
Take the radius of the rolling Circle 50 mm and the radius of the directing circle
150 mm. (5 M)
CLO-3 (20 M)
Q3. By choosing
an appropriate
front view,
prepare a fully
dimensioned
multi-view
drawing of Figure
2 using first
angle projection
method (10 M)
Figure 2
Page 12 of 21
Printed by BoltPDF (c) NCH Software. Free for non-commercial use only.
Q4. By choosing an appropriate view, d raw the assembled view along an
appropriate viewing direction (10 M)
Page 13 of 21
Printed by BoltPDF (c) NCH Software. Free for non-commercial use only.
Page 14 of 21
Printed by BoltPDF (c) NCH Software. Free for non-commercial use only.
Midterm Fall Semester Examinations 2018
ME -111 Engineering Drawing
Paper: B
Date: 10/12/18 Total Marks: 30 M
CLO - 2 ( 10 M)
Q1. Apply the various geometrical techniques to c onst ruct the geometrical template
as shown. Do NOT dimension it. (5 M)
Q2. Illustrate graphically the locus of a point on the circumference of a circle which
rolls on the periphery on a straight path . Take the radiu s of the rolling Circle 10 0
mm . (5 M)
CLO - 3 ( 20 M)
Q3 . By choosing an appropriate
front view, prepare a fully
dimensioned multi -view drawing
using first angle projection
method (10 M)
Page 15 of 21
Printed by BoltPDF (c) NCH Software. Free for non-commercial use only.
Q4 . By choosing an appropriate view, d raw the assembled view along an
appropriate viewing direction (10 M)
Page 16 of 21
Printed by BoltPDF (c) NCH Software. Free for non-commercial use only.
Page 17 of 21
Printed by BoltPDF (c) NCH Software. Free for non-commercial use only.