Professional Documents
Culture Documents
2NA
37.3 bkW / 50 bhp 2800 rpm
CATERPILLAR® ENGINE
SPECIFICATIONS
Inline 4, 4-Stroke-Cycle Diesel
Bore 84 mm (3.3 in.)
Stroke 100 mm (3.9 in.)
Displacement 2.2 L (134.2 in3)
Aspiration - Naturally Aspirated
Compression Ratio 23.3:1
Combustion System Indirect injection
Rotation (from flywheel end) . . . Counterclockwise
Capacity for Liquids
Cooling System 6.98 L
Lube Oil System (refill) ... 10.6 L
Weight, Net Dry (approximate) 240 kg (528 lbs.)
C2.2T Shown
Page 1 of 3
Industrial Fire Pump Driver C2.2NA
854 mm
1900 28.5 143.3
2000 29.9 142.8
2100 31.2 141.9
277 mm
2200 32.5 141.1
2300 33.6 139.5
2400 34.7 137.9
2500 35.5 135.6 705 mm 610 mm
2600 36.3 133.3
2700 36.8 130.2
2800 37.3 127.2 Note: Dimensions depend on final specifications.
G r o s s I n t e r m it te n t P o w e r = S A E J 1 9 9 5
Other rati ngs are av ai l abl e.
INSTALLATION DATA
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POW ER EDGE trade dress as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Page 2 of 3
Electrical Connection Guide
*1
Note: Minimum cable size for the 65 amp alternator is 8.50 mm 2, and 16.00 mm2 for the 85 amp alternator.
* 1 - Maximum current draw for standard oil pressure switch is 0.42 amps (5 Watts maximum bulb).
* 2 - Diode capacity: current 3 amps, reverse voltage 600V (D2 is mandatory).
D1 and D2 = Diodes.
Page 3 of 3