Professional Documents
Culture Documents
• Foundational Credo:
“Contribute to Society through Technology”
Founder
First product
• The Spirit of Hitachi: Namihei Odaira
Harmony Pioneering
Spirit
Sincerity
Products of Hitachi Industrial Equipment Systems Co., Ltd.
Electrical Motors
Inverters
PLCs
Servo Drives
Air Compressors
Blowers
Water Pumps
Coolant pump
Single stage
After cooler Airend
Oil cooler
Coolant cooler
Motor
Starter &
Gear Case VSD(inverter)
Microprocessor Controls Standard
[ F UNC T I ON ME N U ]
Current.
6. C AP AC I T Y C ONT R OL
Cooling fan
Thermal Protection
Aftercooler
Intercooler Pre-cooler
(stainless steel)
Ensures Efficient Cooling
Patented Design
HITACHI Patented Oil Mist Remover (OMR)
(USP 05011388)
Purge
US Pat. US6461112 B1 Issued 20021008
At no
lowload,
load, Screw compression apparatus
and operation control method thereof
Speed the inlet + Purge discharge press.
Closedecreased Hitachi, Ltd.
Inverter DSP
HITACHI Patented Interstage air purging with
No Inlet Valve for 2 stage Rotary Compressors
NO Inlet to close at no load
condition.
NO Inlet valve
Inlet filter
DSP, Two stage, V-type,
Interstage air purging, combined with
No vacuum No inlet valve design, enables stable
and low power consumption at low
loads
Seals Seals
Air end
Interstage Purge
Seals Seals US Pat. US6739841 B2 Issued 20030513
Oil free screw compressor operating at variable
speeds and control method therefor
Second stage Purge Hitachi, Ltd.
Inverter DSP
V-belt
Air Inlet
Pulley
(behind)
Discharge
Pipe
Cooling
Compression
Fan
Chamber
(inside)
Principle of Scroll Compression
AIR
1 Suction 2 Initial Compression
Orbiting Scroll
AIR INLET
Concept I Concept II
uL Approved Panel
100% Oil-Less
Vortex Blowers
Suction & Discharge Designs
Hitachi Vortex Blower Detail
Principle of Vortex Flow
G-Series High Pressure Vortex Blower
uL Approved
E-Series High Volume Vortex Blower
Space Saving
uL Approved
Hitachi G-Series and E-Series Vortex Blowers
are designed to fulfill a variety of needs
G-SERIES
E-SERIES
Capacity
HITACHI Air Technology Products are designed for
the most critical of applications
“THE DRIVE THAT DOES IT ALL”
HITACHI LEADS THE WAY AGAIN
SJ200
NEW MICRO DRIVE
Award-Winning iSLV Technology
Intelligent sensorless vector control
W
Removable Control Terminals
DIP-switch
FW
(Input)
L
L
RS485 Communication as standard
Built-in RS485 Modbus RTU MODBUS RTU is employed.
Baud Rate is 19.2kbps (max)
PLC
ModBus RS485
SJ200 SJ200
New Timing and Logic Functions
Output signal ON/OFF delay function
Output signal
without delay time
ON delay time ON delay time
Output signal
with delay time
•Easy Access To
Filters
•Color Coded
Functions
•Memory Back-up