The document provides instructions for a lab assignment to create inspection drawings with geometric tolerances using maximum material condition modifiers. Students are asked to:
(i) Create a Creo part and generate an inspection drawing showing tolerances for a part, and
(ii) Create another inspection drawing for a different part shown in Figure 1.0, including a table with hole size, bonus, and position tolerance values. The document also provides a guide to adding geometric tolerances to drawings in Creo, including how to display tolerances, add datum features, basic tolerances, reference frames, size tolerances, and dimension text.
The document provides instructions for a lab assignment to create inspection drawings with geometric tolerances using maximum material condition modifiers. Students are asked to:
(i) Create a Creo part and generate an inspection drawing showing tolerances for a part, and
(ii) Create another inspection drawing for a different part shown in Figure 1.0, including a table with hole size, bonus, and position tolerance values. The document also provides a guide to adding geometric tolerances to drawings in Creo, including how to display tolerances, add datum features, basic tolerances, reference frames, size tolerances, and dimension text.
The document provides instructions for a lab assignment to create inspection drawings with geometric tolerances using maximum material condition modifiers. Students are asked to:
(i) Create a Creo part and generate an inspection drawing showing tolerances for a part, and
(ii) Create another inspection drawing for a different part shown in Figure 1.0, including a table with hole size, bonus, and position tolerance values. The document also provides a guide to adding geometric tolerances to drawings in Creo, including how to display tolerances, add datum features, basic tolerances, reference frames, size tolerances, and dimension text.
Geometric Tolerances using Maximum Material Condition (MMC) Modifier
on Inspection Drawings To Do: (i) Create a Creo Part and generate an Inspection Instruction Drawing as shown below in Figure 8.61 (ii) Create a Creo Part and generate an Inspection Instruction Drawing similar to (i) for pat shown in Figure 1.0 overleaf. Create Table similar to (i) with worked out Hole size/Bonus tolerance/Position Tolerance Columns.