Professional Documents
Culture Documents
2.
Contenido UNO
Contenido DOS
Palletizing Standard
3. Contenido TRES
4. September / 2022
Contenido CUATRO
5. Contenido CINCO
In this document you will find the KLIPEN® Standard requirements defined by our
Logistics Management for the palletizing of the following products: ceramics,
porcelain and laminate floors, SPC.
10cm
4. Front section entrance with 39 cm to 42 cm in width (between blocks)
5. Side section entrance with 39 cm to 36 cm wide (between blocks)
Palletized detail
Pallet overflow Loose straps and without Tight straps with cardboard
cardboard corners corners without pallet
overflow
Requirements Palletized
• Examples
Not Permitted Permitted
Extra boxes above the pallet do No extra boxes on the pallet that
not allow proper stacking on top allow stacking respecting the
of the pallet maximum height recommended
by the supplier
Requirements Palletized
• Examples
Wet pallets with evidence of fungi Dry pallets without evidence of fungi
Requirements Palletized
• Examples
Without heat sealing or film use Heat sealing covering the entire
pallet
Requirements Palletized
• Examples
Not Permitted
Well identified pallets with their respective packing label on the front side and on the side of each pallet
Label Information boxes
Regardless of the orientation, if it is vertical or horizontal, the boxes must contain the
following information
This apply for Klipen Boxes and Co-branding
Label Information boxes
1 1. Mts2 por Caja / SQM per Box: The performance per box, for example
2 60x60 is 1,44 sqm per box
3 2. No Piezas por Caja / Pieces per Box: The performance per box, for
example 60x60 is 4 pieces per box
4 3. Tamaño nominal / Size: Nominal size, Example 60x60, 80x80, 60x120
5 4. Tamaño de fabricación / manufacturing size: Nominal size, Example
6 60x60, 80x80, 60x120
7 5. Peso / Weight: you should put the Wright in Kgs per box
6. Naturaleza de la superficie / Nature of Surface : Example full body, color
8
body Esmaltados (GL) y No esmaltados (UGL)
9 7. Baldosa tipo/ Tile Type: refers to the use to which it is put Wall or Floor
10 (revestimiento o pavimento)
11 8. Grupo de absorción de agua, Watter absortion.: Example <0,5% BII BIA
9. Espesor balsosa (mm) / Thickness: Example 9mm or 6mm
12 10. Terminación de los bordes / Edge finish: Example rectified
13 11. Tamaño modular / modular size:
14 12. Calidad / Quality : grade 1 or primera
13. Fabricación regida por la norma / Manufacture governed by the
15
standard: Example ISO 13006
16 14. Resistencia al deslizamiento / Slip resistance: DCOF or R11
15. Instrucciones de uso / Instructions for use: if the product can be used on
17 the wall or on the floor, the symbols are used.
16. Marca Comercial/ Brand Name: KLIPEN SIGNATURE / KLIPEN /
DECORELA / NOVAGAMA / DURANATO
Label Information boxes
1. Nombre / Name: You should put the Klipen name as per the product
according
2. Lote / Tono / Shade / Batch Products made as specified amount within a time
frame
3. Fecha de fabricación / Production Date: Products made as specified amount
within a time frame
4. Importado por / imported by: it is de company in each country.
3
4
Label Information sticker
Label Information sticker
The label must be on the two sides of each box. It could be in two parts
Label Label
The label information apply for all KLIPEN / DECORELA / NOVAGAMA / DURANATO Brands
Identification Boxes example
• Box label
The label must be on the two sides of each box. It could be in two parts
Label Label
The label information apply for all KLIPEN / DECORELA / NOVAGAMA / DURANATO Brands
Identification Boxes
• Box label
The label must be printed directly on the box or on a sticker and NOT stamped as it is easily erased.
1. NUMBER OF CONTAINER
2. SEAL NUMBER
3. SKU (KLIPEN CODE PER EACH COUNTRY)
4. NAME (KLIPEN NAME PER EACH COUNTRY)
5. SIZE
6. SHADE / BATCH
7. MANUFACTURE DATE
8. SQM (M2) Example
9. QUANTITY OF BOXES (CARTONS)
10. BOXES PER PALLET
11. GROSS WEIGHT (KGS)
12. NET WEIGHT (KGS)
Recommended
Distribution of Pallets in Containers
• Mooring Method Container
All cargo must have a lock or tie to reduce the movement that occurs at sea inside the containers including the
drainage bag (between pallets and / or pallets-container) as shown in the images:
Poor quality of pallets: Damaged Wood, fungy, wrong size, press Wood in the bases USD 30 per pallet
• Every factory selling to KLIPEN® must have clear the packaging standard.
• The packaging requirements stated in this document ara very basic and they do not
be out of the capibility of every factory that exports.
• Failure to follow our minimum requirements for packaging and pallet quality will
result in extra costs that will be passed on the supplier (factory).
• If you have any doubts with this document, please do not hesitate to comment us.
• On the boxes label information you cannot let blank spaces or with not marking, any
lacking information means non compliance of the customs standard which incurr in
fines with competent authorities.