This document is a safety inspection checklist for welding, cutting, and grinding. It lists 19 items to check, including requirements that welders have valid certificates and wear protective clothing, equipment is in good working order, areas are isolated and protected, and fire safety precautions are followed. Ratings from 1 to 5 are given to assess how well safety standards for welding, cutting, and grinding are being followed, with N/A as an option. Contractor and PT Vale Indonesia representatives must sign off on the inspection results.
This document is a safety inspection checklist for welding, cutting, and grinding. It lists 19 items to check, including requirements that welders have valid certificates and wear protective clothing, equipment is in good working order, areas are isolated and protected, and fire safety precautions are followed. Ratings from 1 to 5 are given to assess how well safety standards for welding, cutting, and grinding are being followed, with N/A as an option. Contractor and PT Vale Indonesia representatives must sign off on the inspection results.
This document is a safety inspection checklist for welding, cutting, and grinding. It lists 19 items to check, including requirements that welders have valid certificates and wear protective clothing, equipment is in good working order, areas are isolated and protected, and fire safety precautions are followed. Ratings from 1 to 5 are given to assess how well safety standards for welding, cutting, and grinding are being followed, with N/A as an option. Contractor and PT Vale Indonesia representatives must sign off on the inspection results.
9.2 Welders wear long-sleeved catton/ fire reterdant
(for appron) and leather welding jacket/ appron Goggles and eyeshades used (connected to 9.3 hard hats) 9.4 Welders wear respiratory protection Are all cylinders used for oxy-acetylene duty fitted with hoses designed for oxy-acetylene 9.5 service (oxygen hose with right hand thread connectors and acetylene hose with left hand thread connectors)? 9.6 Hoses checked for leaks, damage Flash back arrestors at the gauge end of each 9.7 hose 9.8 Non return (check) valves fitted on the torch Correctly fitted gauges in good working order? 9.9 All hoses fitted to connectors with approved 9.1 crimped or swagged fittings (not hose clamps or twisted wire) During use hoses/ cables should be placed over 9.11 head 9.12 Ground to welder checked prior to use Welding areas isolated, protected by screen and 9.13 blanket 9.14 Fire extinguishers is available 9.15 Welding area free from fire hazards Cable for welding machine in good condition and 9.16 no extension 9.17 Torches lighted by friction lighters 9.18 WPS appoved by Government Poor Excellent IX. Welding, Cutting, and Grinding (Rating) 1 2 3 4 5 N/A
Contractor Reps: ___________________________________ PT Vale Indonesia Reps: ______________________________