Professional Documents
Culture Documents
SAFETY WARNING
Alcatel-Lucent training materials can be for products or refer to products that have both lethal and dangerous
voltages present. Always observe all safety precautions and do not work on the equipment alone. The user is
strongly advised not to wear conductive jewelry while working on the products. Equipment referred to or used
during this course may be electrostatic sensitive. Please observe correct anti-static precautions.
DISCLAIMER
ALCATEL-LUCENT DISCLAIMS ALL WARRANTIES REGARDING THE TRAINING COURSES OR THE CONTENT,
EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. THE ALCATEL-LUCENT WILL NOT BE RESPONSIBLE OR LIABLE FOR ANY
INJURY, LOSS, CLAIM, DAMAGE, OR ANY SPECIAL, EXEMPLARY, PUNITIVE, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION LOSS PROFITS OR LOSS SAVINGS),
WHETHER BASED IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE, THAT ARISES OUT OF OR IS IN ANY
WAY CONNECTED WITH (A) ANY USE OR MISUSE OF THE CONTENT OR THE TRAINING COURSES BY YOU, OR (B)
ANY FAILURE OR DELAY BY ALCATEL-LUCENT, ITS OFFICERS, DIRECTORS, AGENTS OR EMPLOYEES IN
CONNECTION WITH THE CONTENT OR THE TRAINING COURSES (INCLUDING, WITHOUT LIMITATION, THE USE
OF OR INABILITY TO USE ANY COMPONENT OF THE CONTENT OR TRAINING BY YOU). SOME JURISDICTIONS
LIMIT OR PROHIBIT SUCH EXCLUSION OF WARRANTIES OR LIMITATION OF LIABILITIES AND SO THE
FOREGOING EXCLUSION OF WARRANTIES OR LIMITATION OF LIABILITY MAY NOT APPLY TO YOU.
GOVERNING LAW
These Terms of Use and Legal Notice are governed by the laws of France. The operation and use of the training
course is governed by the laws of the country that governs your employment contract, if applicable. If any provision
of these Terms of Use and Legal Notice, or the application thereto to a person or circumstance, is held invalid or
unenforceable by law, statute or a court of competent jurisdiction, for any reason, then such provision shall be
modified and/or superseded by a provision that reflects the intent of the original provision as closely as possible. All
other provisions of these Terms of Use and Legal Notice shall remain in full force and effect. You may not assign
these Terms of Use or any permission granted hereunder without Alcatel-Lucent’s prior written consent. Nothing
herein shall be deemed an employment agreement or an offer of employment or an alteration in any way of a user’s
terms of employment with or within Alcatel-Lucent.
Copyright © 2014 Alcatel-Lucent. All Rights Reserved
Answers should be found in one of the following manuals: Product Information Manual (PIM), WebEML
User Manual (WUM) or Alarm Clearing User Manual (ACUM)
1. What is the maximum number of radios that can be assigned to MPTACC modules in the MSS8
shelf? What are the slot numbers? PIM, WUM or ACUM
12 channels/radios 3 thru 8 PIM (UDS #37-1)
2. What is the chapter number for alarm and abnormal clearing procedures? PIM, WUM or ACUM
#6 ACUM
3. What is the procedure to provision cross connections and the 11 valid connection types? PIM, WUM
or ACUM WUM
Equipment provisioning (#42) WUM
PDH to radio, SDH to radio, SDH to Ring, SDH to LAG, PDH to Ethernet, Ethernet to radio, Radio
to radio, PDH to Ring, Radio to Ring, Ethernet to Ring, Ring to Ring,
4. What is the procedure number to provision an Ethernet port? PIM, WUM or ACUM
Equipment provisioning (#46) WUM
5. What is the Maximum number of AUX cards in the MSS8 shelf? PIM, WUM or ACUM
What are the slot numbers? PIM, WUM or ACUM
8 PIM (UDS 39-1)
6. What is the procedure to upgrade an MPT-HL to MPT-HL L1 LAG. PIM, WUM or ACUM
Equipment functions (76) WUM
7. What is the part number for the Power Injection Box? PIM, WUM or ACUM
3CC50129AA PIM (UDS 122-1)
8. What are the 6 types of protection schemes for radios (hint: features)? PIM, WUM or ACUM
1+0 unprotected, 1+1 Hot StandBy (HSB), 1+1 Space Diversity (SD),
1+1 Frequency Diversity (FD), 2x(1+0) XPIC, 4x(1+0) XPIC, 2x(1+1) XPIC
PIM (5)
9. Summarize the action of step #1 under Bandwidth overflow? PIM, WUM or ACUM
Table 6.3 Remove/delete some cross connects ACUM
10. When the alarm has been determined as an Excessive Environmental Temperature Alarm, what is
the name of the manual used to replace the MPT-HL? PIM, WUM or ACUM
Table 6.3 Hardware Installation and Replacement Manual ACUM
1. Complete the following table. Indicate the type of card in each slot, and its function.
Slot Type of Card Active Standby Slot Type of Card Active Standby
1 2
3 4
5 6
7 8
2. Which SFP connection on the EAS card is connected to the Main MPT? _______________________
3. Which SFP connection on the EAS card is connected to the Spare MPT? _______________________
4. Are there any other SFP connections on the EAS card? _____________________________________