Professional Documents
Culture Documents
0.0gl
GREEN area is the same as ground level
RED areas indicate topography and you must follow the scan for this
DARK BLUE is ramp
LIGHT BLUE IS 0.55 GL
YELLOW IS 0.35 GL
- Neighbour property Ground Level step down
- There also is a step down at the hallway to enter the property
-review floor to ceiling heights after adjusting floor levels
-check measurements inside floor plan with measurements. Ceiling heights are referenced in
square boxes.
-
Ensure proportional size between floors and then fit ceilings according to measurements.
These floor to ceiling heights are all wrong, please adjust.
Adjust floor to ceiling height, left and right property floors do not align, consistently there is
one step difference.
FIRST FLOOR PLAN
Adjust dimensions.
The void at the side rear is of 2100mm, consistent from the floor below.
The bathroom is not been accurately surveyed, but the dimensions are wrong, should be
more like the one below:
Properties to the left side have the roof converted with a mansard.
Rear properties are to be modelled as well, including windows.
Please try to get them right.
The floating box below is the two storey pitched roof...
MODEL IT MORE ACCURATELY.
IT’S COMPLETELY WRONG.
Please refer to the polyCam scan and side ally survey:
SIDE PASSAGE
(note that we have provided the survey map which has been removed from the file, revert)
DRAINAGE
MANHOLES