Professional Documents
Culture Documents
-- INDEX --
SELECT ANY PRODUCT & ANALYSE
ITS GOOD AND BAD FEATURES
1 INTRODUCTION 1
2 TYPES OF WATERPROOF
2
PRODUCTS
DR.FIXIT WATERPROOFING
3 3-4
SOLUTIONS
6 CONCLUSION 7
7 REFERENCES 8
INTRODUCTION
Dr. Fixit Roof seal is a specialised solution that can be used to protect roof leakage
problems. It forms a liquid waterproofing membrane for new roofs and even bridges
roof-cracks of up to 2mm.
Dr. Fixit LW+ is another essential waterproofing solution from Dr Fixit. This material
is integral for waterproofing of plaster and concrete. Using this product as an
additive in cement enhances cementing properties of cement, imparting its higher
compressive strength. It helps prevent cracks and dampness in the wall and ceilings,
avoids rusting of steel bars, and increase the durability of the structure.
Dr. Fixit Raincoat is an external coating product for exterior walls, providing
complete water protection from the outside.
2
The difference between waterproofing and damp proofing
Dr.fixit Waterproofing Solutions
Although we tend to use the terms waterproofing and damp proofing interchangeably,
there is a significant difference between the two. Waterproofing is far more effective as
it keeps water in its various states from crossing a surface, therefore moisture from the
soil, water vapour and water under hydrostatic pressure is efficiently barred. Whereas
damp proofing only controls water vapour from the soil moisture and will not stop the
inflow of liquid water. This is an important difference to appreciate and helps you
decide on whether damp proofing can be enough for your foundation or basement
especially if you live in a damp climate or if there is a likelihood of flooding in your
region.
Therefore damp proofing will only keep the dampness out of your basement or
foundation, it cannot prevent water from seeping in through cracks. On the other hand,
waterproofing is effective in preventing water from entering your basement through
any holes or cracks. Since waterproofing materials are more flexible in nature and are
applied as a thicker layer, it helps to keep the cracks covered and provides better
insulation to the foundation as well as the structure.
The foundation is the key to a strong sustainable structure. Due to the capillary
movement of water, the water rises from the soil to the plinth. And as it passes through
the foundation it rises higher and reaches the walls causing damp walls, which in turn
can result in the growth of mould and fungi and can cause multiple health issues.
Traditionally, a rich cement paste or tar was used to cover the plinth or foundation.
However, such systems failed as they become brittle over time and develop cracks. It is
best to use Dr. Fixit Solyseal as a waterproofing barrier for foundations and plinth,
which protects against rising dampness. It is easy to apply and also protects the
structure against the chemicals in the soil.
Waterproofing also eliminates the inflow of water and moisture that can enter the
home through the ceiling, wall and roof cracks; therefore these are also areas that must
be waterproofed to ensure a lasting solution. Damp proofing them may not be
sufficient.
3
In fact, while constructing a new building, you could use LW+ integral waterproofing
solution which enhances and modifies the properties of cement to prevent cracks and
dampness, to increase the strength of concrete, delay the corrosion of steel bars and to
improve the workability of mortar.
Waterproofing your home essentially provides a security blanket towards the health of
your home. Conventional damp proofing methods are insufficient and it might,
therefore, be a good idea to spend a little more and get quality waterproofing done to
protect your house, family health and financial investment.
Quality waterproofing can be the difference between a strong, long lasting, healthy
home and one that constantly requires repair and maintenance.
Benefits:
Corrosion resistant – Makes concrete more
cohesive, hence protects steel better against
corrosion.
4
Areas of Application
Waterproofing of concrete and sand-cement mortars used in
Basements,
Roof slabs and screeds,
Water tanks & water retaining structures,
External plastering,
Bathrooms and balconies,
Sumps and drains
Method of Application
Charge cement & aggregates to concrete mixer as per the mix design, mix in dry
state for 1–2 minutes.
Start addition of 75–80% mixing water & mix for 2-3 minutes.
Dr. Fixit Pidiproof LW+ Professional is added as per the recommended dosage into
the remaining mixing /gauging water, then add to concrete mixer & mix for
another 2 minutes.
Place the concrete or apply plaster, as needed.
Cure the applied mortar or concrete as per good construction practices
Dosage
Normal dosage is 200 ml per 50 kg bag of Cement and to get more water reduction up
to 400 ml per 50 kg bag of Cement can be used.
5
Features
Prevents honeycombing
Disadvantages
Workability issues
Faster drying
High Cost
If we Use it With out wearing Proper Equipment’s (Gloves, mask, etc.) causes
several health issue.
6
CONCLUSION
7
REFERENCES: -
https://www.drfixit.co.in/
http://www.polycarbonatesheetsindia.com/
https://civiconcepts.com/